| .. |
|
example_configurations
|
Enable extended capabilities report by default (#6969)
|
2017-06-07 02:36:34 -04:00 |
|
blinkm.cpp
|
Patch #else / #endif comments
|
2017-05-09 12:37:23 -05:00 |
|
blinkm.h
|
|
|
|
boards.h
|
Clean up after recent commits
|
2017-06-02 23:45:52 -05:00 |
|
buzzer.h
|
|
|
|
cardreader.cpp
|
Patch #else / #endif comments
|
2017-05-09 12:37:23 -05:00 |
|
cardreader.h
|
Patch #else / #endif comments
|
2017-05-09 12:37:23 -05:00 |
|
circularqueue.h
|
|
|
|
Conditionals_LCD.h
|
Save up to 94 bytes of RAM on 20x4 LCD Display machines (#6964)
|
2017-06-05 17:02:00 -05:00 |
|
Conditionals_post.h
|
Prevent illegal leveling combinations
|
2017-05-31 23:36:57 -05:00 |
|
Conditionals.h
|
|
|
|
Configuration_adv.h
|
Enable extended capabilities report by default (#6969)
|
2017-06-07 02:36:34 -04:00 |
|
configuration_store.cpp
|
Fix: z_endstop_adj is never initialized
|
2017-06-07 10:29:56 -05:00 |
|
configuration_store.h
|
Fix broken EEPROM save/load
|
2017-05-17 12:41:27 -04:00 |
|
Configuration.h
|
Config cleanups
|
2017-06-01 19:26:16 -05:00 |
|
dac_mcp4728.cpp
|
|
|
|
dac_mcp4728.h
|
|
|
|
digipot_mcp4018.cpp
|
Format hex values as uppercase
|
2017-04-21 21:42:41 -05:00 |
|
digipot_mcp4451.cpp
|
Patch #else / #endif comments
|
2017-05-09 12:37:23 -05:00 |
|
dogm_bitmaps.h
|
|
|
|
dogm_font_data_6x9_marlin.h
|
|
|
|
dogm_font_data_HD44780_C.h
|
|
|
|
dogm_font_data_HD44780_J.h
|
|
|
|
dogm_font_data_HD44780_W.h
|
|
|
|
dogm_font_data_ISO10646_1_PL.h
|
Polish font
|
2017-04-21 21:42:41 -05:00 |
|
dogm_font_data_ISO10646_1_tr.h
|
Improve M600 with timeout, wait for heatup.
|
2017-02-15 05:29:34 -06:00 |
|
dogm_font_data_ISO10646_1.h
|
|
|
|
dogm_font_data_ISO10646_5_Cyrillic.h
|
|
|
|
dogm_font_data_ISO10646_CN.h
|
|
|
|
dogm_font_data_ISO10646_Greek.h
|
|
|
|
dogm_font_data_ISO10646_Kana.h
|
|
|
|
dogm_font_data_Marlin_symbols.h
|
|
|
|
duration_t.h
|
Fix formatting of print time hours above one day
|
2017-03-01 18:55:25 +02:00 |
|
endstop_interrupts.h
|
Patch #else / #endif comments
|
2017-05-09 12:37:23 -05:00 |
|
endstops.cpp
|
Towards supporting Z2 in Endstops::report_state
|
2017-05-02 15:39:32 -05:00 |
|
endstops.h
|
guaranteed BLTouch detection
|
2017-02-11 12:01:34 -06:00 |
|
enum.h
|
Unify M600 and M125 pause features (#6407)
|
2017-05-26 13:01:02 -05:00 |
|
fastio_168.h
|
Split up fastio.h, document pin mappings
|
2017-05-21 10:33:27 -05:00 |
|
fastio_644.h
|
Split up fastio.h, document pin mappings
|
2017-05-21 10:33:27 -05:00 |
|
fastio_1280.h
|
Split up fastio.h, document pin mappings
|
2017-05-21 10:33:27 -05:00 |
|
fastio_1281.h
|
Split up fastio.h, document pin mappings
|
2017-05-21 10:33:27 -05:00 |
|
fastio_AT90USB-Marlin.h
|
Split up fastio.h, document pin mappings
|
2017-05-21 10:33:27 -05:00 |
|
fastio_AT90USB-Teensy.h
|
Cleanup some fastio code
|
2017-05-22 17:38:36 -05:00 |
|
fastio.h
|
copied file changes from PR #5685
|
2017-05-31 13:22:38 -05:00 |
|
G26_Mesh_Validation_Tool.cpp
|
Remove requirement for LCD when UBL is used. (#6971)
|
2017-06-07 02:24:36 -04:00 |
|
gcode.cpp
|
Clean up after recent commits
|
2017-06-02 23:45:52 -05:00 |
|
gcode.h
|
Make Parser::seen volatile
|
2017-06-02 23:45:52 -05:00 |
|
hex_print_routines.cpp
|
New GCode Parser - Implementation
|
2017-05-23 14:15:10 -05:00 |
|
hex_print_routines.h
|
New GCode Parser - Implementation
|
2017-05-23 14:15:10 -05:00 |
|
language_an.h
|
Case light as a toggle menu item
|
2017-05-28 14:32:07 -05:00 |
|
language_bg.h
|
Case light as a toggle menu item
|
2017-05-28 14:32:07 -05:00 |
|
language_ca.h
|
Case light as a toggle menu item
|
2017-05-28 14:32:07 -05:00 |
|
language_cn.h
|
Add more options to the Bed Leveling menu
|
2017-05-28 14:04:28 -05:00 |
|
language_cz.h
|
Case light as a toggle menu item
|
2017-05-28 14:32:07 -05:00 |
|
language_da.h
|
Add more options to the Bed Leveling menu
|
2017-05-28 14:04:28 -05:00 |
|
language_de.h
|
Case light as a toggle menu item
|
2017-05-28 14:32:07 -05:00 |
|
language_el-gr.h
|
Add more options to the Bed Leveling menu
|
2017-05-28 14:04:28 -05:00 |
|
language_el.h
|
Add more options to the Bed Leveling menu
|
2017-05-28 14:04:28 -05:00 |
|
language_en.h
|
UBL Manual Build Menu Option (#6972)
|
2017-06-06 22:14:18 -05:00 |
|
language_es.h
|
Case light as a toggle menu item
|
2017-05-28 14:32:07 -05:00 |
|
language_eu.h
|
Case light as a toggle menu item
|
2017-05-28 14:32:07 -05:00 |
|
language_fi.h
|
Add more options to the Bed Leveling menu
|
2017-05-28 14:04:28 -05:00 |
|
language_fr.h
|
Case light as a toggle menu item
|
2017-05-28 14:32:07 -05:00 |
|
language_gl.h
|
Case light as a toggle menu item
|
2017-05-28 14:32:07 -05:00 |
|
language_hr.h
|
Case light as a toggle menu item
|
2017-05-28 14:32:07 -05:00 |
|
language_it.h
|
Case light as a toggle menu item
|
2017-05-28 14:32:07 -05:00 |
|
language_kana_utf8.h
|
Case light as a toggle menu item
|
2017-05-28 14:32:07 -05:00 |
|
language_kana.h
|
Case light as a toggle menu item
|
2017-05-28 14:32:07 -05:00 |
|
language_nl.h
|
Case light as a toggle menu item
|
2017-05-28 14:32:07 -05:00 |
|
language_pl-DOGM.h
|
Case light as a toggle menu item
|
2017-05-28 14:32:07 -05:00 |
|
language_pl-HD44780.h
|
Case light as a toggle menu item
|
2017-05-28 14:32:07 -05:00 |
|
language_pl.h
|
Case light as a toggle menu item
|
2017-05-28 14:32:07 -05:00 |
|
language_pt_utf8.h
|
Add more options to the Bed Leveling menu
|
2017-05-28 14:04:28 -05:00 |
|
language_pt-br_utf8.h
|
Add more options to the Bed Leveling menu
|
2017-05-28 14:04:28 -05:00 |
|
language_pt-br.h
|
Add more options to the Bed Leveling menu
|
2017-05-28 14:04:28 -05:00 |
|
language_pt.h
|
Add more options to the Bed Leveling menu
|
2017-05-28 14:04:28 -05:00 |
|
language_ru.h
|
Add more options to the Bed Leveling menu
|
2017-05-28 14:04:28 -05:00 |
|
language_test.h
|
MSG_VOLUMETRIC => MSG_FILAMENT
|
2017-04-17 16:39:36 -05:00 |
|
language_tr.h
|
Case light as a toggle menu item
|
2017-05-28 14:32:07 -05:00 |
|
language_uk.h
|
Case light as a toggle menu item
|
2017-05-28 14:32:07 -05:00 |
|
language_zh_CN.h
|
Add more options to the Bed Leveling menu
|
2017-05-28 14:04:28 -05:00 |
|
language_zh_TW.h
|
Add more options to the Bed Leveling menu
|
2017-05-28 14:04:28 -05:00 |
|
language.h
|
M421 Mesh Point Offset and misc. UBL clean up (#6685)
|
2017-05-10 18:54:10 -05:00 |
|
least_squares_fit.cpp
|
UBL G29 -P3.1 smart fill (#6823)
|
2017-05-22 12:33:50 -05:00 |
|
least_squares_fit.h
|
Apply const float & more
|
2017-05-22 17:38:36 -05:00 |
|
M100_Free_Mem_Chk.cpp
|
New GCode Parser - Implementation
|
2017-05-23 14:15:10 -05:00 |
|
macros.h
|
Simplify counting of printable characters
|
2017-05-31 23:45:41 -05:00 |
|
Makefile
|
fix missing serial.cpp in Makefile
|
2017-04-17 11:59:03 +02:00 |
|
Marlin_main.cpp
|
Ensure safe temperature for M600
|
2017-06-04 17:25:16 -05:00 |
|
Marlin.h
|
fix "hex_address not defined" when UBL is enabled
|
2017-06-03 13:19:55 -05:00 |
|
Marlin.ino
|
TMC2130 Library: @teemuatlut replaces @makertum
|
2017-03-07 04:22:06 -06:00 |
|
MarlinConfig.h
|
|
|
|
MarlinSerial.cpp
|
Patch MarlinSerial to match up with 32-bit version
|
2017-04-02 04:39:18 -05:00 |
|
MarlinSerial.h
|
Patch MarlinSerial to match up with 32-bit version
|
2017-04-02 04:39:18 -05:00 |
|
mesh_bed_leveling.cpp
|
Patch #else / #endif comments
|
2017-05-09 12:37:23 -05:00 |
|
mesh_bed_leveling.h
|
Patch #else / #endif comments
|
2017-05-09 12:37:23 -05:00 |
|
nozzle.cpp
|
Use new attribute macros in more places
|
2017-05-22 17:38:58 -05:00 |
|
nozzle.h
|
Use new attribute macros in more places
|
2017-05-22 17:38:58 -05:00 |
|
pins_3DRAG.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_5DPRINT.h
|
|
|
|
pins_AZTEEG_X1.h
|
|
|
|
pins_AZTEEG_X3_PRO.h
|
Cleanup of spacing and formatting
|
2017-06-04 11:31:43 -05:00 |
|
pins_AZTEEG_X3.h
|
Cleanup of spacing and formatting
|
2017-06-04 11:31:43 -05:00 |
|
pins_BAM_DICE_DUE.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_BQ_ZUM_MEGA_3D.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_BRAINWAVE_PRO.h
|
Pins-related cleanup, formatting
|
2017-05-21 07:18:03 -05:00 |
|
pins_BRAINWAVE.h
|
Pins-related cleanup, formatting
|
2017-05-21 07:18:03 -05:00 |
|
pins_CHEAPTRONIC.h
|
|
|
|
pins_CHEAPTRONICv2.h
|
Easier override of FILWIDTH_PIN
|
2017-06-02 12:05:46 -05:00 |
|
pins_CNCONTROLS_11.h
|
Predefine auto fan pins in some pins files
|
2016-10-26 18:38:32 -05:00 |
|
pins_CNCONTROLS_12.h
|
|
|
|
pins_ELEFU_3.h
|
|
|
|
pins_FELIX2.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_GEN3_MONOLITHIC.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_GEN3_PLUS.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_GEN6_DELUXE.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_GEN6.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_GEN7_12.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_GEN7_13.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_GEN7_14.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_GEN7_CUSTOM.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_K8200.h
|
|
|
|
pins_K8400.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_LEAPFROG.h
|
|
|
|
pins_MEGACONTROLLER.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_MEGATRONICS_2.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_MEGATRONICS_3.h
|
Neater Megatronics 3 pins
|
2017-05-24 17:49:23 -05:00 |
|
pins_MEGATRONICS.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_MELZI_MAKR3D.h
|
#if defined => #ifdef / PIN_EXISTS
|
2017-03-22 20:51:11 -05:00 |
|
pins_MELZI.h
|
#if defined => #ifdef / PIN_EXISTS
|
2017-03-22 20:51:11 -05:00 |
|
pins_MIGHTYBOARD_REVE.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_MINIRAMBO.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_MINITRONICS.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_MKS_13.h
|
Patch pins files hotends/e-steppers sanity check
|
2017-04-07 10:46:33 -05:00 |
|
pins_MKS_BASE.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_OMCA_A.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_OMCA.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_PRINTRBOARD_REVF.h
|
Easier override of FILWIDTH_PIN
|
2017-06-02 12:05:46 -05:00 |
|
pins_PRINTRBOARD.h
|
Easier override of FILWIDTH_PIN
|
2017-06-02 12:05:46 -05:00 |
|
pins_RAMBO.h
|
Easier override of FILWIDTH_PIN
|
2017-06-02 12:05:46 -05:00 |
|
pins_RAMPS_13.h
|
|
|
|
pins_RAMPS_OLD.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_RAMPS.h
|
Support for ZRIB v2.0 Control Board
|
2017-06-02 12:05:46 -05:00 |
|
pins_RIGIDBOARD_V2.h
|
Need to define this for Rigidboard V2
|
2017-04-30 19:04:27 -05:00 |
|
pins_RIGIDBOARD.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_RUMBA.h
|
Pins-related cleanup, formatting
|
2017-05-21 07:18:03 -05:00 |
|
pins_SAINSMART_2IN1.h
|
Patch pins files hotends/e-steppers sanity check
|
2017-04-07 10:46:33 -05:00 |
|
pins_SANGUINOLOLU_11.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_SANGUINOLOLU_12.h
|
#if defined => #ifdef / PIN_EXISTS
|
2017-03-22 20:51:11 -05:00 |
|
pins_SAV_MKI.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_SCOOVO_X9H.h
|
Easier override of FILWIDTH_PIN
|
2017-06-02 12:05:46 -05:00 |
|
pins_SETHI.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_STB_11.h
|
#if defined => #ifdef / PIN_EXISTS
|
2017-03-22 20:51:11 -05:00 |
|
pins_TEENSY2.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_TEENSYLU.h
|
Pins-related cleanup, formatting
|
2017-05-21 07:18:03 -05:00 |
|
pins_ULTIMAIN_2.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_ULTIMAKER_OLD.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_ULTIMAKER.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_ZRIB_V20.h
|
Support for ZRIB v2.0 Control Board
|
2017-06-02 12:05:46 -05:00 |
|
pins.h
|
Support for ZRIB v2.0 Control Board
|
2017-06-02 12:05:46 -05:00 |
|
pinsDebug_list.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pinsDebug_Teensyduino.h
|
Remove extraneous whitespace
|
2017-03-18 03:17:39 -05:00 |
|
pinsDebug.h
|
Pins-related cleanup, formatting
|
2017-05-21 07:18:03 -05:00 |
|
planner_bezier.cpp
|
|
|
|
planner_bezier.h
|
|
|
|
planner.cpp
|
Ubl delta fixes and improvements (#6941)
|
2017-06-03 17:11:43 -05:00 |
|
planner.h
|
G33 evolutionary changes
|
2017-05-20 19:23:39 -05:00 |
|
point_t.h
|
|
|
|
printcounter.cpp
|
Cosmetic patches
|
2017-04-26 06:24:23 -05:00 |
|
printcounter.h
|
Cosmetic patches
|
2017-04-26 06:24:23 -05:00 |
|
qr_solve.cpp
|
|
|
|
qr_solve.h
|
|
|
|
SanityCheck.h
|
Remove requirement for LCD when UBL is used. (#6971)
|
2017-06-07 02:24:36 -04:00 |
|
Sd2Card.cpp
|
Format hex values as uppercase
|
2017-04-21 21:42:41 -05:00 |
|
Sd2Card.h
|
|
|
|
SdBaseFile.cpp
|
Reference op with variable name
|
2017-05-28 11:33:22 -05:00 |
|
SdBaseFile.h
|
Reference op with variable name
|
2017-05-28 11:33:22 -05:00 |
|
SdFatConfig.h
|
|
|
|
SdFatStructs.h
|
|
|
|
SdFatUtil.cpp
|
|
|
|
SdFatUtil.h
|
|
|
|
SdFile.cpp
|
|
|
|
SdFile.h
|
|
|
|
SdInfo.h
|
|
|
|
SdVolume.cpp
|
|
|
|
SdVolume.h
|
|
|
|
serial.cpp
|
Add proportional font adjustment ratio
|
2017-05-10 17:19:03 -04:00 |
|
serial.h
|
Ensure Arduino.h and configs are included for serial.cpp
|
2017-05-17 05:07:35 -05:00 |
|
servo.cpp
|
Patch #else / #endif comments
|
2017-05-09 12:37:23 -05:00 |
|
servo.h
|
Add macros for delays by machine cycle
|
2017-04-11 09:18:32 -05:00 |
|
softspi.h
|
Clean up excess whitespace, comment formatting
|
2017-04-28 18:32:38 -05:00 |
|
speed_lookuptable.h
|
Spacing, cleanup in speed_lookuptable.h
|
2016-12-19 14:52:45 -08:00 |
|
spi.h
|
Use new attribute macros in more places
|
2017-05-22 17:38:58 -05:00 |
|
stepper_dac.cpp
|
# This is a combination of 2 commits.
|
2017-04-06 16:16:27 -05:00 |
|
stepper_dac.h
|
|
|
|
stepper_indirection.cpp
|
Cleanup, extend TMC2130 implementation
|
2017-04-14 23:00:00 -05:00 |
|
stepper_indirection.h
|
Updates to support 5 extruders
|
2017-04-09 03:49:16 -05:00 |
|
stepper.cpp
|
Unused var in Stepper
|
2017-06-04 17:25:16 -05:00 |
|
stepper.h
|
Format hex values as uppercase
|
2017-04-21 21:42:41 -05:00 |
|
stopwatch.cpp
|
General comment cleanup
|
2017-04-08 18:58:33 -05:00 |
|
stopwatch.h
|
Patch #else / #endif comments
|
2017-05-09 12:37:23 -05:00 |
|
temperature.cpp
|
fix redefinition errors for redundant_temperature
|
2017-06-03 16:40:14 -05:00 |
|
temperature.h
|
fix redefinition errors for redundant_temperature
|
2017-06-03 16:40:14 -05:00 |
|
thermistornames.h
|
Add Thermistor 75: MGB18 silicon pad
|
2017-03-18 11:35:20 -05:00 |
|
thermistortable_1.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_2.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_3.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_4.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_5.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_6.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_7.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_8.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_9.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_10.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_11.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_12.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_13.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_20.h
|
Header and pins changes to support 5 extruders
|
2017-04-07 10:46:36 -05:00 |
|
thermistortable_51.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_52.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_55.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_60.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_66.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_70.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_71.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_75.h
|
Add Thermistor 75: MGB18 silicon pad
|
2017-03-18 11:35:20 -05:00 |
|
thermistortable_110.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_147.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_998.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_999.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_1010.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_1047.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortables.h
|
Misc. Clean Up (#6822)
|
2017-05-21 22:09:51 -05:00 |
|
twibus.cpp
|
Patch #else / #endif comments
|
2017-05-09 12:37:23 -05:00 |
|
twibus.h
|
Patch #else / #endif comments
|
2017-05-09 12:37:23 -05:00 |
|
types.h
|
|
|
|
ubl_G29.cpp
|
Remove requirement for LCD when UBL is used. (#6971)
|
2017-06-07 02:24:36 -04:00 |
|
ubl_motion.cpp
|
Ubl delta fixes and improvements (#6941)
|
2017-06-03 17:11:43 -05:00 |
|
ubl.cpp
|
Ubl delta fixes and improvements (#6941)
|
2017-06-03 17:11:43 -05:00 |
|
ubl.h
|
Ubl delta fixes and improvements (#6941)
|
2017-06-03 17:11:43 -05:00 |
|
ultralcd_impl_DOGM.h
|
Maintain message scroll rate
|
2017-06-04 17:25:15 -05:00 |
|
ultralcd_impl_HD44780.h
|
Save up to 94 bytes of RAM on 20x4 LCD Display machines (#6964)
|
2017-06-05 17:02:00 -05:00 |
|
ultralcd_st7920_u8glib_rrd.h
|
Patch #else / #endif comments
|
2017-05-09 12:37:23 -05:00 |
|
ultralcd.cpp
|
Fix a compile error with _lcd_set_z_fade_height
|
2017-06-07 10:29:56 -05:00 |
|
ultralcd.h
|
copied file changes from PR #5685
|
2017-05-31 13:22:38 -05:00 |
|
utf_mapper.h
|
Simplify counting of printable characters
|
2017-05-31 23:45:41 -05:00 |
|
utility.cpp
|
Reference op with variable name
|
2017-05-28 11:33:22 -05:00 |
|
utility.h
|
Reference op with variable name
|
2017-05-28 11:33:22 -05:00 |
|
vector_3.cpp
|
Use 'sq' macro where possible
|
2017-05-02 22:22:23 -05:00 |
|
vector_3.h
|
Reference op with variable name
|
2017-05-28 11:33:22 -05:00 |
|
Version.h
|
bugfix-1.1.x ReadMe, Version, helper scripts
|
2017-05-04 07:17:10 -05:00 |
|
watchdog.cpp
|
Patch #else / #endif comments
|
2017-05-09 12:37:23 -05:00 |
|
watchdog.h
|
|
|
