MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
10,028 Commits 1 Branch 0 Tags 96 MiB
1067c43107
Commit Graph

10028 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Roxy-3D
b978153ca4
Stow Probe at end of G29 J3 2018-04-13 14:46:40 -05:00
Scott Lahteine
090d72f591
[1.1.x] Add optional menu item to toggle software endstops (#10392) 2018-04-13 00:24:20 -05:00
Scott Lahteine
e3c2d43b2b Tweak MBL move close to bed 2018-04-12 22:41:26 -05:00
Scott Lahteine
5274ab0ad5 MESH_BED_LEVELING before PROBE_MANUALLY 2018-04-12 22:26:56 -05:00
Scott Lahteine
59d9886473 Tweak MIN_STEPS_PER_SEGMENT sanity-check 2018-04-12 20:23:43 -05:00
Luc Van Daele
6e30d1bef1 [1.1.x] G33 MIN_STEPS_PER_SEGMENT (#10385) 2018-04-12 20:19:42 -05:00
Scott Lahteine
db81a1d4a2 Make sure MBL starts close to the bed 
Fix #10390
 2018-04-12 19:37:50 -05:00
Scott Lahteine
2edc13a0e2 Fix M118 parameter handling 
Fix #10388
 2018-04-12 19:06:41 -05:00
Scott Lahteine
8db9b800e7 Compress/update comments ubl_motion 
…to fit more code on the screen and correct outdated commentary contrasting ABL.
 2018-04-12 18:08:33 -05:00
Luc Van Daele
21971f2f7a Overhaul of G33 Delta Calibration (#8821) 2018-04-11 19:12:56 -05:00
Luc Van Daele
b2265869b2 Low Point for delta calibration (#10362) 2018-04-11 18:03:34 -05:00
Scott Lahteine
f408863043 Fix Spanish MSG_[ABC] items 2018-04-11 15:21:08 -05:00
Scott Lahteine
336131fb37 Trailing whitespace 2018-04-11 00:27:43 -05:00
Scott Lahteine
808d6f367b Tweak RAMPS SDSS pins 2018-04-10 16:46:17 -05:00
Scott Lahteine
00d03c6dc5
Merge pull request #10350 from thinkyhead/bf1_z_probe_low_point 
[1.1.x] Z_PROBE_LOW_POINT to prevent probe/bed damage
 2018-04-09 18:24:38 -05:00
Scott Lahteine
4f660a18bc Add Z_PROBE_LOW_POINT to prevent damage 2018-04-09 17:22:28 -05:00
Scott Lahteine
e87ae5b643 Add Z_PROBE_LOW_POINT to example configs 2018-04-09 01:56:57 -05:00
Scott Lahteine
73fe8ef4df Followup to #10177 2018-04-09 01:16:51 -05:00
Scott Lahteine
157d28c418 Rename, arrange advanced pause purge options 2018-04-09 01:14:07 -05:00
Scott Lahteine
e143b1252f Appy const to manage_inactivity 2018-04-08 23:53:55 -05:00
Roxy-3D
816fa9e2b4 More accurate number for Z_PROBE_OFFSET_FROM_EXTRUDER 2018-04-08 22:25:11 -05:00
Roxy-3D
661a38586b Resolve corruption of Max7219 Debug LED Matrix 2018-04-08 22:25:11 -05:00
Scott Lahteine
4d297dd562 Add --no-track in mfnew git script 2018-04-08 06:51:30 -05:00
Scott Lahteine
56b5fb5e15 Update Bed PID config comments 2018-04-08 06:46:05 -05:00
Scott Lahteine
2205c7775b FILAMENT_CHANGE_LOAD_LENGTH sanity-check 
Followup to #10177
 2018-04-08 03:31:15 -05:00
Scott Lahteine
b637b80a9a
Merge pull request #10177 from thinkyhead/bf1_filament_load_accel 
[1.1.x] Filament load/unload add acceleration for Bowden
 2018-04-08 03:28:45 -05:00
Scott Lahteine
19440df4d0 Better RESTORE_LEVELING_AFTER_G28 sanity-check 
As suggested by @GMagician
 2018-04-08 03:13:35 -05:00
Scott Lahteine
6f8717ce12 Fix LIGHTWEIGHT_UI with UBL 
As mentioned in https://github.com/MarlinFirmware/Marlin/issues/10317#issuecomment-379100702
 2018-04-08 03:11:53 -05:00
Scott Lahteine
6ec2cbce18 Bring RepRapPro Huxley config up to date 
Followup to #10343
 2018-04-08 00:31:18 -05:00
indazoo
f6bf247302 Add RepRapPro Huxley configuration (#10343) 2018-04-08 00:19:40 -05:00
Sean
4b36a0a3dc Add acceleration for filament change, load, unload. 
This is useful to achieve a higher movement speed on Bowden extruders.
Also add a slow mode before ramping up to the high speed to make loading easier.
 2018-04-07 23:14:40 -05:00
Scott Lahteine
be0afd71df Add ADVANCED_PAUSE_FEATURE ACCEL options to example configs 2018-04-07 23:14:40 -05:00
Scott Lahteine
8e35029f10
Merge pull request #9789 from Lenbok/monitor_chamber_temperature_and_auto_fan 
[1.1.x] Monitor chamber temperature, with auto chamber fan control.
 2018-04-06 23:52:06 -05:00
Lenbok
0aa833fe6c Chamber temperature monitoring and auto fan control. 
This is an initial cut for feedback.

Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?

Chamber temperatures are not reported on the LCD in any way.

When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.

As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
 2018-04-06 23:09:44 -05:00
Scott Lahteine
08b09f7a4c Add Chamber Temp options to example configs 2018-04-06 23:09:43 -05:00
Roman Moravčík
151962baf2 Update Slovak language (#10313) 2018-04-06 20:20:40 -05:00
Bob-the-Kuhn
aca2bbbc50 Add TMC software SPI pins to pinsDebug_list.h (#10325) 2018-04-06 20:16:05 -05:00
Scott Lahteine
211544b543 Reset progress bar when print ends 
Fix #10330
Based on #10333 by @marcio-ao
 2018-04-06 20:12:40 -05:00
GMagician
8e36d00ad0 [1.1.x] Update language_it.h (#10323) 
Updated to #10296
 2018-04-06 20:07:08 -05:00
Scott Lahteine
e596931aac
Merge pull request #10321 from thinkyhead/bf1_einsy_retro_etc 
[1.1.x] Fix TMC2130 DIAG1 active high, Einsy Retro
 2018-04-06 00:30:50 -05:00
Scott Lahteine
ed949cc5c1 Added support for Einsy Retro 
http://reprap.org/wiki/EinsyRetro
 2018-04-05 18:15:58 -05:00
Scott Lahteine
53757444c5 Default active low for TMC2130 DIAG1 (#10294) 
- Added sanity check to require endstop inverting with SENSORLESS_HOMING
 2018-04-05 18:15:58 -05:00
Scott Lahteine
c46d47f45f Scale feedrate (mm/s to deg/s) for SCARA 2018-04-05 16:17:23 -05:00
Anton Piliugin
bc2fc86993 Update language_ru.h (#10311) 2018-04-05 00:47:02 -05:00
Scott Lahteine
01e100360f
Merge pull request #10176 from noingwhat/1.1.x-Continuous-Purge 
[1.1.x] Continuous Purge
 2018-04-04 22:50:37 -05:00
Scott Lahteine
dba26a6d1f Add Continuous Purge feature to Advanced Pause 2018-04-04 20:59:50 -05:00
Scott Lahteine
05fc3d7891 Add ADVANCED_PAUSE_CONTINUOUS_PURGE to example configs 2018-04-04 20:53:00 -05:00
Scott Lahteine
7ff70d7adb
Improve heating/cooling LCD messages (#10296) 2018-04-04 19:13:48 -05:00
Scott Lahteine
a7e142460c
MBL should add z_offset regardless of fade (#10307) 2018-04-04 18:27:09 -05:00
GMagician
9d2ef95f1d Additional tool-change fix (#10305) 
Followup to #10243
 2018-04-04 17:06:25 -05:00