Commit Graph

8297 Commits

Author SHA1 Message Date
Roxy-3D
2cbdc0ebb6 Fix large Z corrections when nozzle moves off of UBL mesh (#7415) 2017-08-02 16:51:04 -05:00
Scott Lahteine
ce65c13a97 Merge pull request #7398 from fiveangle/bf_lcd_bed_level_requirements
Clarify LCD_BED_LEVELING requirements
2017-08-01 17:46:07 -05:00
Scott Lahteine
6ef71c3d5f Merge pull request #7397 from Kaibob2/patch-4
Fix for #7395
2017-08-01 17:40:59 -05:00
Dave Johnson
936dfb965c Clarify LCD_BED_LEVELING requirements
LCD_BED_LEVELING requires PROBE_MANUALLY with auto bed leveling enabled.  See #7396
2017-08-01 14:13:54 -07:00
Kai
ffe3013bb5 Fix for #7395
Filament change causes freeze during paused print. This PR disables Filament change in the prepare menu when a print from SD Card is paused. See #7395
2017-08-01 21:45:41 +02:00
Scott Lahteine
7ef0650504 Merge pull request #7386 from oysteinkrog/fix/DualX
Fix DUAL_X_CARRIAGE movement
2017-07-31 20:30:06 -05:00
Øystein Krog
e948f77cf9 Fix DUAL_X_CARRIAGE not moving at all
Axis would only move when homing.
Bug introduced in 91841d75c9.
Fixes #6956, fixes #7050 and fixes #7291
2017-07-31 18:44:26 +02:00
Scott Lahteine
08b0456d91 Merge pull request #7379 from thinkyhead/bf_manual_bed_level_floor
Manual Bed Leveling: Goto previous Z height at each probe point
2017-07-30 05:41:12 -05:00
Scott Lahteine
850e404838 Merge pull request #7380 from thinkyhead/bf_touchy_probe_delay
Implement probing delay for piezo sensors
2017-07-30 05:39:45 -05:00
teemuatlut
936d00dda8 Implement probing delay for piezo sensors 2017-07-29 21:46:40 -05:00
Scott Lahteine
29eef360d0 Merge pull request #7308 from thinkyhead/bf_cleanup_config_adv
Fixes for FWRETRACT
2017-07-29 21:20:19 -05:00
Wilfried Chauveau
894608f8a3 Manual Bed Leveling: Goto previous Z height at each probe point 2017-07-29 21:15:37 -05:00
Scott Lahteine
ff06e1a030 Merge pull request #7372 from tcm0116/delta_calib_menu
Move Delta Calibration menu to the Prepare menu
2017-07-29 21:05:03 -05:00
Thomas Moore
15e009b6ca Move Delta Calibration menu to the Prepare menu 2017-07-28 08:33:18 -05:00
Scott Lahteine
8b0bd44b1e Merge pull request #7368 from thinkyhead/bf_fix_warnings
Patch to fix some compiler warnings
2017-07-28 02:53:13 -05:00
Scott Lahteine
bfd396c13a Patch to fix some compiler warnings 2017-07-28 02:27:16 -05:00
Scott Lahteine
48c5f3dddf Tweak kill action #ifdef 2017-07-27 23:42:01 -05:00
Scott Lahteine
be7a9a07c5 Don't reset grid with G29 Q + PROBE_MANUALLY 2017-07-27 22:47:43 -05:00
Scott Lahteine
dfe670247d Merge pull request #7363 from marcio-ao/bugfix-1.1.x
Makefile fixes and U8G support.
2017-07-27 21:31:56 -05:00
Marcio Teixeira
af83c512b8 Added support for U8G. 2017-07-27 07:49:25 -06:00
Scott Lahteine
4eff18854b Rename options with swap_ prefix 2017-07-27 04:14:29 -05:00
Scott Lahteine
14482d2f2a Strip auto-retract for impossible M(IN|AX)_AUTORETRACT combo 2017-07-27 04:14:29 -05:00
Scott Lahteine
9fc72422e4 Don't let the flow multiplier affect retract/recover length 2017-07-27 04:14:29 -05:00
Scott Lahteine
fee696db5d Improve retract() for G10/G11/autoretract 2017-07-27 04:14:29 -05:00
Scott Lahteine
423b0f3a1e Replace MIN_RETRACT with MIN_AUTORETRACT, MAX_AUTORETRACT 2017-07-27 04:14:29 -05:00
Scott Lahteine
283d15a8d0 Add a Travis CI test for FWRETRACT 2017-07-27 04:14:29 -05:00
Scott Lahteine
e52c1a0882 Merge pull request #7341 from thinkyhead/bf_bed_size
Add X_BED_SIZE, Y_BED_SIZE to configurations
2017-07-27 04:05:24 -05:00
Scott Lahteine
5b69d67da9 Merge pull request #7359 from fiveangle/pio_printrboard_revf
Add PIO entry for PRINTRBOARD_REVF
2017-07-26 23:09:06 -05:00
Scott Lahteine
51864fd365 Add bed size as a configuration option 2017-07-26 23:04:54 -05:00
Scott Lahteine
dc7c95e07b Remove @ section fwretract 2017-07-26 22:46:16 -05:00
Scott Lahteine
a972c060d7 Merge pull request #7347 from fiveangle/at90usb_usbcon_unification
Remove extraneous USBCON defines for AT90USB boards
2017-07-26 21:44:18 -05:00
Unknown
42aa10d263 Add PIO entry for PRINTRBOARD_REVF
fix from PIO corruption
2017-07-25 19:09:08 -07:00
Dave Johnson
4718c09c48 Remove extraneous USBCON defines for AT90USB boards
USBCON is definied by serial.h pullikng in MarlinConfig.h which in turn pulls in Arduino.h.  Defining in later includes has shown to cause compile issues so removing all extraneous calls for and potentially easier future linker troubleshooting.
more USBCON unification
2017-07-23 16:41:48 -07:00
Scott Lahteine
21591352d7 Merge pull request #7340 from thinkyhead/bf_neopixel_rgbw
Add support for Printrbot Neopixel RGBW strip.
2017-07-22 16:19:12 -05:00
C. Scott Ananian
890e7a16a9 Add support for Printrbot Neopixel RGBW strip.
Connected as described at http://printrbot.com/shop/led-strip/

Based on patch by Kelly Anderson <kelly@xilka.com> at
http://www.xilka.com/printrbot/marlin/1.1.4/20170707/
2017-07-22 16:07:55 -05:00
Scott Lahteine
a059e95463 Bring Infitary i3 config up to date 2017-07-21 20:49:19 -05:00
Scott Lahteine
d6d6043548 Merge pull request #7338 from thinkyhead/bf_mks_ps_on_pin
MKS 1.3+: Add pin mapping for PS_ON
2017-07-21 20:00:26 -05:00
Scott Lahteine
03989824fa Merge pull request #7339 from thinkyhead/bf_russian_part_1
Update Russian translation - Part 1
2017-07-21 19:57:18 -05:00
Alexey Shvetsov
851f9f5399 Update Russian translation - Part 1
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
2017-07-21 19:32:37 -05:00
Scott Lahteine
b7a16e4468 Merge pull request #7315 from fixoid/patch-1
Fixing SWITCHING_EXTRUDER feature to work with HOTENDS > 1
2017-07-21 19:10:54 -05:00
Alexey Shvetsov
f38b8c5bf8 MKS 1.3+: Add pin mapping for PS_ON
This allows the use of D4 as PS_ON since MKS Gen doesn't have a PS_ON pin. However this effectively allows only 3 servos (instead of 4).

Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
2017-07-21 18:50:05 -05:00
Scott Lahteine
60cb2bd4e7 Merge pull request #7332 from thinkyhead/bf_before_fwretract
Improve FWRETRACT comments
2017-07-21 00:20:56 -05:00
Scott Lahteine
8a3bc6be4d Improve FWRETRACT config options and commentary
Add more details as requested in #7198
2017-07-20 22:57:50 -05:00
Scott Lahteine
b0173ccdb9 Drop extra initializers for vars initialized by EEPROM code 2017-07-20 22:57:49 -05:00
Scott Lahteine
7afafb05b8 Split G10/G11 into separate functions 2017-07-20 02:24:13 -05:00
Scott Lahteine
c45798694f Add some more requirements to the G-code list 2017-07-20 02:24:13 -05:00
Scott Lahteine
72de280c1e BARICUDA valve pressure consistently uint8_t 2017-07-20 02:21:40 -05:00
Scott Lahteine
4d98e3f0a7 General cleanup 2017-07-20 02:21:40 -05:00
fixoid
e530c67349 Fixing SWITCHING_EXTRUDER feature 2017-07-19 21:15:26 +03:00
Tannoo
2ad3ca5d8a Bugfix (#7310) 2017-07-18 22:55:14 -05:00