MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
9,524 Commits 1 Branch 0 Tags 96 MiB
738a8495ad
Commit Graph

92 Commits

Author SHA1 Message Date
Scott Lahteine
738a8495ad Improve TMC config organization, naming 2018-03-13 21:43:43 -05:00
Scott Lahteine
e63cb5fe8f
[1.1.x] Make MIN_PROBE_EDGE a general option (for electronic probes) (#10068) 
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
 2018-03-13 01:15:29 -05:00
Scott Lahteine
33b18dc801 Add Z_AFTER_PROBING to example configs 2018-03-11 09:48:03 -05:00
Scott Lahteine
cce80fd41c Add UNKNOWN_Z_NO_RAISE to example configs 2018-03-09 23:11:35 -06:00
Scott Lahteine
a9392c6b27 Set a safe default MINIMUM_STEPPER_PULSE of 2 2018-03-09 03:59:18 -06:00
Scott Lahteine
2d0d5eccd8 Move AUTO_REPORT_SD_STATUS to SDSUPPORT block 2018-03-07 01:58:31 -06:00
Scott Lahteine
dc733192be Add AUTO_REPORT_SD_STATUS to example configs 2018-03-07 00:06:17 -06:00
Scott Lahteine
3cdd2591ed Update custom boot screen description 2018-03-03 20:10:35 -06:00
Scott Lahteine
8488d64062 Standardize encoder defaults 2018-02-24 22:37:55 -06:00
Scott Lahteine
8c22f9fd4f Bring some example configs up to speed 2018-02-24 22:00:15 -06:00
Roxy-3D
9e3025e07b
Change Folger Tech i3-2020 defaults... 2018-02-24 10:28:08 -06:00
Scott Lahteine
5299b577d1
Spanish (UTF8) Language (#9785) 
From #7314 by @MrAmericanMike
 2018-02-23 20:23:35 -06:00
Scott Lahteine
6845f17fb2 Prettify LCD_PROGRESS_BAR options 2018-02-23 19:13:03 -06:00
Scott Lahteine
03da273ea6 Fix LCD_PROGRESS bar 
Fix #9208
 2018-02-23 13:59:55 -06:00
Scott Lahteine
235d024505 Add RESTORE_LEVELING_AFTER_G28 to example configs 2018-02-23 12:42:21 -06:00
Sebastianv650
9c65890644 [1.1.x] LIN_ADVANCE v1.5 (#9700) 2018-02-23 00:53:41 -06:00
Scott Lahteine
967076b080 Add LIGHTWEIGHT_UI to example configs 2018-02-22 00:25:53 -06:00
Scott Lahteine
855b188102
Hephestos2 heated bed kit for all (#9756) 2018-02-21 22:26:56 -06:00
Scott Lahteine
18881e6725 Add 20x4 option for Sainsmart LCD 2018-02-20 20:09:49 -06:00
Scott Lahteine
cc8711419e Add NUM_RUNOUT_SENSORS to example configs 2018-02-19 06:25:36 -06:00
Scott Lahteine
4813938a87 Update configs for 2.0.x parity 2018-02-18 19:42:20 -06:00
Scott Lahteine
28e7562e7a Add CODEPENDENT_XY_HOMING to example configs 2018-02-18 01:09:51 -06:00
Scott Lahteine
3a1fedaee6 Update LCD_SET_PROGRESS_MANUALLY in configs 2018-02-17 15:41:20 -06:00
Bob-the-Kuhn
1647db8fad Set CONTROLLER_FAN_PIN example to -1 2018-02-15 21:29:09 -06:00
Roxy-3D
c8d3069580
UBL - Allow user to control Z-Height correction for off mesh movements (#9663) 
* UBL - Allow user to control Z-Height correction for off mesh movements

* Enable UBL_Z_RAISE_WHEN_OFF_MESH on test machine for time being
 2018-02-15 19:23:01 -06:00
Roxy-3D
66370006bb
Fix G26 Circles... (#9638) 
Will get this duplicated in bugfix_2.0.0 tomorrow...
 2018-02-14 17:31:25 -06:00
Scott Lahteine
d89a61bd51 Update DIGIPOT_I2C_MOTOR_CURRENTS comments 2018-02-13 22:56:03 -06:00
Scott Lahteine
4f04f4e6b8 Followup to #9532 2018-02-08 03:39:20 -06:00
jaysonkelly
f8a8711075 I2C position encoders update 
Updating I2C position encoders to enable babystepping and Babystep XY when using the ecm microstep correction method. Also changed default method to ECM microstep.
 2018-02-08 02:46:12 -06:00
Scott Lahteine
8438a57910 Followup to #9532 2018-02-08 02:05:18 -06:00
Thomas Moore
a471cd26e1 [1.1.x] Enable Z axis and delta sensorless homing (#9532) 2018-02-08 02:02:48 -06:00
Scott Lahteine
80946a17ee Add AUTO_POWER_CONTROL to example configs 2018-02-06 00:20:26 -06:00
Scott Lahteine
527d260581 Add ULTI_CONTROLLER to example configs 2018-02-05 22:24:08 -06:00
Scott Lahteine
ca58084020 Add MALYAN_LCD to configurations 2018-02-04 21:18:42 -06:00
Manuel Valentino
652162777b [1.1.x] Fixed wrong information about TMC2208 wiring (#9334) 2018-02-02 04:14:43 -06:00
teemuatlut
923f17328f Add TMC software SPI (#9362) 2018-02-02 03:56:08 -06:00
Scott Lahteine
3d9f360b5a Better probe boundaries for linear/grid 2018-01-22 01:10:34 -06:00
Scott Lahteine
957bb3124a Add thermistor 15 tuned for JGAurora A5 2018-01-21 16:57:47 -06:00
Scott Lahteine
428fbe8228 Apply CASE_LIGHT_USE_NEOPIXEL to example configs 2018-01-20 16:27:30 -06:00
Roxy-3D
cbdbeb3e69
PronterFace M105 work around (#9227) 
PronterFace keeps sending M105 requests during long operations like G29 P1, G29 P2, G29 P4 and G26. The serial buffer fills up before the operation is complete. The problem is, a corrupted command gets executed. It is very typical for the M105 to turn into a M1 (actually... M1M105 is typical).

This causes the printer to say "Click to resume..."

This is a temporary fix until we figure out the correct way to resolve the issue.

More work needed for G26.
 2018-01-17 22:51:19 -06:00
Roxy-3D
c11665e92f
Regression fixes for UBL's G29 P1, G29 P2, G29 P4 and G26 (#9213) 
The changes to ultralcd.cpp for is_lcd_clicked() did not encompass the
full functionality of UBL's G29 P1, P2 and P4.   It also broke G26's
ability to abort in several of its phases.

This is the first pass at fixing the problem.   It has been tested for
correctness for several hours but more testing  needs to be done.
There may be a few follow up patches to finish covering all the corner
cases, but right now I need to merge this before any conflicts show up.

Some of these changes will need to be moved over to the bugfix-v2.0.0
branch.   That will happen a few days from now.
 2018-01-17 00:27:50 -06:00
Roxy-3D
06adef7343
Get FT-i3-2020 example files in compliance with ?_BED_SIZE 2018-01-15 15:32:19 -06:00
Scott Lahteine
69c993092b Followup to Ender config 2018-01-15 05:48:50 -06:00
Scott Lahteine
8f08e029d8 More up-front option to show SD percentage 2018-01-14 23:30:59 -06:00
Scott Lahteine
734fa91e63 Misc config updates 2018-01-14 23:18:45 -06:00
Scott Lahteine
d1ce0bc071 M915 Z Axis Calibration 2018-01-09 18:55:08 -06:00
GMagician
5903b002ac 1.1.x semitec 104NT-4 added (#9120) 
Table is very very similar to old 104-GT2 so I added only the name and recycled old ID
 2018-01-09 16:53:44 -06:00
Scott Lahteine
8e82dd0b5b
Merge pull request #8947 from houseofbugs/bugfix-1.1.x 
[1.1.x] SLIM_LCD_MENUS option
 2017-12-31 00:56:10 -06:00
Scott Lahteine
839dd66c3b Synchronize configs with 2.0.x 2017-12-31 00:02:22 -06:00
Scott Lahteine
7a8c132ee9 Apply SLIM_LCD_MENUS to example configs 2017-12-30 23:52:53 -06:00