Scott Lahteine
8e808fcadc
General cleanup, apply const
2017-10-13 16:13:36 -05:00
Scott Lahteine
da93a272a0
Move leveling_is_active to a macro
2017-10-13 16:11:27 -05:00
Scott Lahteine
3d5b10735f
Remove obsolete UBL z_offset
2017-10-13 08:23:01 -05:00
gallynero
94228d4522
Enable change feedrate in delta
...
Enable change the relative feedrate on a printing job in delta machines with UBL
2017-10-12 01:55:51 +02:00
Slawomir Ciunczyk
167058b61f
Different NEOPIXEL types
...
Changes to support NEOPIXEL LED strips
- Support for different NEOPIXEL as defined in Adafruit_NeoPixel.h
- ability to setup startup brightness
- ability to define sequential/non-sequential transition of color change during heating-up
- additional parameter to M150 P<brightness>
2017-10-10 01:58:40 -05:00
Scott Lahteine
f835245ee1
Merge pull request #7908 from thinkyhead/bf1_goodbye_legacy_advance
...
[1.1.x] Remove legacy ADVANCE feature
2017-10-10 00:31:39 -05:00
Scott Lahteine
38110e220d
Segmented manual moves for kinematics
2017-10-09 23:10:17 -05:00
deram
9239fcf0da
Allow UBL G29 and G26 to build without a probe
2017-10-09 18:37:53 -05:00
Scott Lahteine
381ebc043f
Add support for ST7565-64128N
...
Based on #7447 by @Bob-the-Kuhn
2017-10-09 17:39:03 -05:00
jmdearras
c7e0a49c94
Add some new LCD displays
...
- Original CR-10
- MKS Mini Display
2017-10-09 17:39:03 -05:00
Scott Lahteine
067622fcc6
Apply some tweaks based on 2.0.x
2017-10-09 17:39:03 -05:00
Scott Lahteine
ae256576e1
Bring configs into parity with 2.0.x
2017-10-09 17:38:39 -05:00
Scott Lahteine
cbfcce09fa
Remove legacy ADVANCE feature
2017-10-09 04:27:45 -05:00
Scott Lahteine
a21201a713
LCD filename already concatentated
2017-10-07 15:14:58 -05:00
Scott Lahteine
53f2f188f2
LCD filename already concatenated
2017-10-07 15:11:28 -05:00
Scott Lahteine
a6e95c7d25
Fix display issue with SD_ALPHA_SORT caching
2017-10-07 15:07:05 -05:00
Dave Johnson
97e6663bb3
[1.1.x] Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled ( #7878 )
...
* Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled
If HOME_AFTER_DEACTIVATE, there is no need to warn on LCD since printer will home prior to starting print. Saves 60 bytes PROGMEM.
add HD44780 too
* Reduce lines used
* Reduce lines used
2017-10-07 15:00:56 -05:00
Scott Lahteine
e2ceb1b800
Merge pull request #7632 from GMagician/Wrong-sanitycheck-message-fix
...
Addressing #7612
2017-10-07 02:25:35 -05:00
Scott Lahteine
8c93295d62
Merge pull request #7873 from thinkyhead/bf1_anet_encoder_pulses
...
[1.1.x] Fixing ANET encoder pulses
2017-10-07 01:21:14 -05:00
Phr3d13
c26242a553
Fixing #7833
2017-10-07 00:07:24 -05:00
Scott Lahteine
dac5f20a01
Patch SD file draw bug
2017-10-06 23:53:08 -05:00
Scott Lahteine
b211fa4e1f
Remove extra NEWPANEL settings in Conditionals_LCD.h
2017-10-06 17:23:32 -05:00
LVD-AC
355cba4aa7
Fixes for G33
2017-10-06 15:52:53 -05:00
Scott Lahteine
e287e14354
Tweak spacing in utf8_mapper.h
2017-10-06 15:11:27 -05:00
Scott Lahteine
5e63ba970d
Merge pull request #7862 from thinkyhead/bf1_mapper_c2c3c4_sk
...
[1.1.x] Added Slovak C2C3C4 mapper implementation.
2017-10-06 14:56:26 -05:00
Roman Moravčík
2a46ab288e
Added Slovak C2C3C4 mapper implementation.
2017-10-06 14:40:15 -05:00
Scott Lahteine
7999249a5c
Set TEMP_SENSOR_0 to 1 in CR-10 example config
...
As pointed out in #7692 by @totalitarian
2017-10-06 14:29:00 -05:00
Scott Lahteine
0ec9a7f090
Fix xon_xoff_state initialization
2017-10-04 12:10:15 -05:00
Scott Lahteine
a47c5c093d
Merge pull request #7459 from ejtagle/xon-xoff-sdxfer
...
[1.1.x] XON/XOFF serial handshake (for faster transfers to SD)
2017-10-02 23:52:41 -05:00
Scott Lahteine
bcb8722513
Fix DUAL_X_CARRIAGE manual move
...
Addressing #7745
2017-10-02 23:28:52 -05:00
Scott Lahteine
4c34b3ad9c
Stop redundant E4_IS_TMC2130 current control
2017-10-02 23:10:34 -05:00
Scott Lahteine
1b8b5c4b06
Make prepare_move_to_destination_dualx a full move function
2017-10-02 23:10:18 -05:00
Scott Lahteine
4e19ff75b6
XON/XOFF corrections, tweaks, formatting, etc.
2017-10-02 03:52:42 -05:00
Scott Lahteine
94caabf89a
Add XON/XOFF options to example configs
2017-10-02 03:52:41 -05:00
Scott Lahteine
f365448338
Merge pull request #7811 from thinkyhead/bf1_fix_resume_print
...
[1.1.x] Fix broken M600 resume_print
2017-10-01 22:54:34 -05:00
GMagician
8ab426c3a4
Updated all examples configurations
...
Forgot to update examples configurations. Done now
2017-10-01 21:04:12 -05:00
GMagician
33d28c24bf
Implementing [FR] #7548
...
Added new configuration to inhibit XYZ movements when home is not done
2017-10-01 21:02:42 -05:00
Scott Lahteine
ac70048945
Only MarlinConfig.h ahead of feature block
2017-10-01 20:55:14 -05:00
MasterPIC
40a4a716e1
Fix filament change bug in resume_print
...
Expected behaviour: while (auto)extruding the new filament, the nozzle should not move. It should move (from filament replacement position to printing position) only after the user has confirmed the successful filament replacement and extrusion.
Actual behaviour: while (auto)extruding the new filament, the nozzle moves from filament replacement position back to printing position.
So the extrusion step is mixed with the movement required to go back to the printing position.
The provided code seems to be working but probably a better fix is required.
2017-10-01 18:42:29 -05:00
Scott Lahteine
802f147686
Remove some excess whitepsace
2017-10-01 18:25:04 -05:00
Scott Lahteine
80a0f935a1
Fix G10-G11 by adding a synchronize
...
Based on #7792 by @tcm0116
2017-09-30 17:46:31 -05:00
MasterPIC
7f8ff0a724
Show leveling status on character LCD
2017-09-27 12:18:41 -05:00
Scott Lahteine
723a34d9c7
Add confirmation to Init EEPROM command
2017-09-27 11:27:47 -05:00
Scott Lahteine
2efd5b119d
Add USER_SCRIPT_RETURN option
2017-09-27 11:23:34 -05:00
Scott Lahteine
b105e47cb5
Move SERVO0 pin on GT2560 A+ with BLTOUCH enabled
...
Based on #7769
2017-09-27 10:39:44 -05:00
DecoyPlatypus
41dcbe89dd
Fixed ST7920_DELAY typo
...
Fixed typo where ST7920_DELAY_2 was being #defined after a check for #ifndef ST7920_DELAY_3
2017-09-27 03:01:09 -05:00
DecoyPlatypus
70a64355f6
Fixed LCD_FOR_MELZI SanityCheck
...
Sanity Check for LCD_FOR_MELZI would fail with "Please select no more than one LCD controller option" any time #define LCD_FOR_MELZI was enabled in Configuration.h, even if there were no other LCD options enabled.
2017-09-27 03:01:09 -05:00
Scott Lahteine
e37a1ded0d
Increase BABYSTEP_MULTIPLICATOR to 100
...
Ideally, it should be calculated based on Z steps per unit so that each
babystep corresponds to around 0.025mm. Smaller than this is largely
insignificant for typical layer heights.
2017-09-27 00:14:26 -05:00
Scott Lahteine
3e28243076
No need for LCD_PINS_Dn when unused
2017-09-27 00:12:20 -05:00
Scott Lahteine
bbb94b8f68
babystepping tweak
2017-09-27 00:12:20 -05:00
Scott Lahteine
a277b43e30
Fix babystep menu display
2017-09-27 00:12:20 -05:00
Scott Lahteine
8a994fb1b1
Fix encoder pulses for G3D_PANEL
2017-09-27 00:12:20 -05:00
Scott Lahteine
ac2ac99e15
Fix bad logic in autostart
...
As pointed out by @marcio-ao in #7638
2017-09-24 17:52:35 -05:00
Scott Lahteine
c1cc79176c
Full-featured Creality configs
2017-09-24 16:52:42 -05:00
Scott Lahteine
f25dccd6d1
Disable BABYSTEP_XY by default in all configs
2017-09-24 16:52:42 -05:00
Scott Lahteine
cd09a83cfa
Add size note to SDSORT_LIMIT
2017-09-24 16:52:41 -05:00
Scott Lahteine
9bbc2df217
General code cleanup, spacing
2017-09-24 16:52:41 -05:00
Luc Van Daele
74d430cb97
matrix names update ( #7697 )
...
* matrix names update
* symplified names
* new angle normalization
* ABC
* axis
* least squares
* recalc_delta_settings
* endstop_adj
* 0p
* bug
2017-09-24 01:45:31 -05:00
Scott Lahteine
9d4d53e2fd
Update links to old wiki page
2017-09-23 22:06:45 -05:00
Scott Lahteine
00896f1713
Fix LEVEL_BED_CORNERS (No leveling required)
2017-09-23 22:00:45 -05:00
Scott Lahteine
c3a9e95a5f
Define drawmenu items once, in ultralcd.cpp
2017-09-23 22:00:45 -05:00
Scott Lahteine
0afd25a010
Fix caselight compile issues
2017-09-23 22:00:44 -05:00
GMagician
5b87843fae
Addressing #7612
...
Replaced extruder with hotend
2017-09-07 19:07:36 +02:00
Scott Lahteine
386b74f8c2
Merge pull request #7593 from marcio-ao/bugfix-1.1.x
...
Added option for graphical overlay for Z-offset (Resubmission of #7350 and #7586 )
2017-09-02 00:01:38 -05:00
Tannoo
2a963fb5d1
UBL LCD Bugfixes ( #7598 )
2017-09-01 16:59:06 -05:00
Marcio Teixeira
d69c5317df
Added option for graphical overlay for Z-offset
2017-08-31 14:21:39 -06:00
Scott Lahteine
367e1b54ba
Merge pull request #7591 from thinkyhead/bf1_misc_patches
...
M111: no args reports current flags
2017-08-31 15:19:29 -05:00
Scott Lahteine
8a184a526a
Marlin: Patch G33, allow M111 to give status
2017-08-31 14:35:00 -05:00
Scott Lahteine
353c23b16e
Enforce BED_CENTER_AT_0_0 on Delta, SCARA
2017-08-31 14:34:59 -05:00
Scott Lahteine
898f48e331
CNC workspace planes for G5
...
According to LinuxCNC, G5 should throw an error if the current plane mode isn't XY.
2017-08-31 14:29:29 -05:00
Scott Lahteine
5851c2d36f
MAX7219 followup ( #7564 )
...
* Add MAX7219_DEBUG to Travis CI testing
* Tweak config and use standard pin naming for MAX7219_DEBUG
* MAX7219: Apply coding standards, use macros, etc.
* Make code work...
2017-08-31 11:44:43 -05:00
Scott Lahteine
52073f21c5
Merge pull request #7556 from thinkyhead/bf1_slovak_language
...
Slovak UTF-8 translation
2017-08-27 21:05:53 -05:00
Scott Lahteine
321f98f867
Fix servo delay in Folgertech config
2017-08-27 20:53:27 -05:00
jneilliii
36771e9492
Fixes required for Creality CR-10
2017-08-27 20:39:16 -05:00
Roxy-3D
3f0b38ed5d
Add Max7219 LED Matrix Debug Support ( #7563 )
...
* Add Max7219 LED Matrix Debug Support
The Max7219 8x8 LED Matrix's are very helpful for debugging new code.
And for that matter, just trying to maximize printer settings without
causing stuttering.
The displays are very inexpensive (under $2.00 with shipping) and
provide a lot of help when trying to debug complicated code.
* Try to keep Makefile up to date.
2017-08-25 17:03:07 -05:00
GMagician
0067bb2840
Addressing #7552
...
When M405 is used it changes 'volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]' value. When M406 disables M405 it leaves the value unchanged.
This PR applies 'calculate_volumetric_multipliers' in M406 instead of resetting it to 1.0 because M200 may not be compatible with M405 hence I'm sure to restore anyway with correct value.
2017-08-25 03:23:16 -05:00
Scott Lahteine
2b12093589
Merge pull request #7532 from thinkyhead/bf1_fan_mux_vben
...
New feature: Part-Cooling Fan Multiplexer
2017-08-25 03:16:40 -05:00
Michal Holes
54d48130f3
Slovak UTF-8 translation
...
Slovak UTF-8 translation
2017-08-23 19:14:35 -05:00
Scott Lahteine
86c024ce98
Organize, document pins.h include lines
2017-08-23 18:33:00 -05:00
Scott Lahteine
c7b07d20f2
Minor patches to pins files
2017-08-23 18:32:59 -05:00
Scott Lahteine
356af7dcb0
Tweak Sanguinololu-related pins files
2017-08-23 18:32:59 -05:00
Scott Lahteine
11a724d8fc
Sanguinololu example configuration
2017-08-23 18:32:59 -05:00
Scott Lahteine
e337df2e98
Miscellaneous tweaks to serial outputs, code cleanups
2017-08-23 18:32:58 -05:00
Vben
c0409b85e7
New feature: Part-Cooling Fan Multiplexer
2017-08-18 15:59:04 -05:00
Scott Lahteine
e82e9073d6
Merge pull request #7530 from GMagician/Code-reduction
...
Code reduction with some configurations
2017-08-18 13:57:59 -05:00
GMagician
6127154af3
Fix identation by tab
...
There was a tab instead of spaces
2017-08-18 11:34:55 +02:00
GMagician
b94a1c6b9f
Code reduction this some configurations
...
When switching noozle and extruder but these operations are done by the same servo in 'setup' function there is a unnecessary call
2017-08-18 11:11:00 +02:00
GMagician
405a2132f3
#7529 compile fix
...
I made an error in previous fix
2017-08-17 22:04:28 +02:00
GMagician
869d7f3703
#7504 missing part
...
#7504 integration has missed this part.
When more than 1 servo is used with bltouch it's impossible to predefine default servo delay for it.
In my original fix I completely removed this part but maybe this is a better compromise
2017-08-17 21:43:47 +02:00
Scott Lahteine
101ba70517
Merge pull request #7505 from thinkyhead/bf1_anet_1_pio
...
Add Anet 1.0 to Platformio.ini
2017-08-17 00:33:20 -05:00
Vben
4817b39d98
Added new feature for AutoParking Extruder (APE)
2017-08-16 17:33:11 -05:00
Scott Lahteine
6772e33ef6
Use [XY]_CENTER for error correction
...
Followup to #7512
2017-08-16 16:13:09 -05:00
Scott Lahteine
385f1bb9e5
Merge pull request #7504 from thinkyhead/bf1_servo_delays
...
Individual servo delays
2017-08-16 16:05:22 -05:00
Scott Lahteine
2a31c9f2ce
Merge pull request #7515 from cdedwards/bugfix-1.1.x
...
Fix for G26 spam output
2017-08-16 16:01:10 -05:00
MTrab
5fa61c0ad3
Add Anet 1.0 to Platformio.ini
...
Added env:anet10 to platformio.ini for easy compile and upload to this board
2017-08-16 15:59:20 -05:00
Scott Lahteine
b3f59ec945
Merge pull request #7519 from thinkyhead/bf1_cleanups_aug_16
...
Add "Level Corners" menu item
2017-08-16 15:58:15 -05:00
Tannoo
b33739d493
UBL_Language_Update ( #7520 )
...
* UBL_Language_Update
Translatable strings
* Use slightly better wording...
* Use slightly better wording...
2017-08-16 09:49:04 -05:00
Scott Lahteine
a1878cd1c0
Add "Level Corners" menu option
2017-08-16 02:54:33 -05:00
Scott Lahteine
0a18fb735e
Use "PSU" label to fit on screen
2017-08-16 02:51:00 -05:00
Scott Lahteine
30887feae3
Tweak some formatting in ABL G29
2017-08-16 02:51:00 -05:00