Scott Lahteine
|
7e585cab83
|
Add POWER_LOSS_RECOVERY to example configs
|
2018-04-21 19:13:30 -05:00 |
|
Scott Lahteine
|
e76545c450
|
Add Stopwatch::resume method
|
2018-04-21 19:09:31 -05:00 |
|
Scott Lahteine
|
1894b981af
|
Add R parameter to G28 to specify pre-raise
|
2018-04-21 19:09:31 -05:00 |
|
Festivejelly
|
61f9e28c23
|
[1.1.x] Wait for bed heaters between probing (#9890)
|
2018-04-21 15:44:07 -05:00 |
|
Scott Lahteine
|
c6ecfc1429
|
[1.1.x] Split TRIGORILLA into 1.3 and 1.4 (#10468)
|
2018-04-20 19:27:11 -05:00 |
|
Sebastien Andrivet
|
4cc2bc1343
|
[1.1.x] Add new capability to report if Thermal Protection is enabled (#10465)
|
2018-04-20 16:42:56 -05:00 |
|
Scott Lahteine
|
dcb8af0518
|
Match Makefile order to boards.h
|
2018-04-20 16:19:31 -05:00 |
|
Scott Lahteine
|
4108382c2c
|
Complete CREALITY_ENDER revert
Followup to #9694
|
2018-04-20 16:19:31 -05:00 |
|
Scott Lahteine
|
0c1be965b6
|
Don't report point 0 in MBL G29
|
2018-04-20 13:18:42 -05:00 |
|
Scott Lahteine
|
6f87e4b4dc
|
Fix up enqueue now functions
…and apply to MALYAN_LCD.
|
2018-04-19 19:33:16 -05:00 |
|
Roxy-3D
|
c91b3142aa
|
Update ubl_motion.cpp
Restore necessary and needed loop termination logic.
|
2018-04-19 12:03:18 -05:00 |
|
Scott Lahteine
|
df6becfb07
|
Merge pull request #10452 from thinkyhead/bf1_mks_base_15
[1.1.x] Add BOARD_MKS_BASE_15 with digital micro-stepping
|
2018-04-18 22:32:11 -05:00 |
|
Scott Lahteine
|
51aa9743a6
|
Rename MKS_13 to MKS_GEN_13
|
2018-04-18 22:16:16 -05:00 |
|
Scott Lahteine
|
e561ecb5a7
|
Add BOARD_MKS_BASE_15 with digital micro-stepping
|
2018-04-18 22:06:25 -05:00 |
|
Scott Lahteine
|
38ed5f5ee9
|
Fix calls to ubl.get_z_correction
|
2018-04-18 21:43:44 -05:00 |
|
Scott Lahteine
|
23618d9cd0
|
Use 0 as the bed position (not Z_MIN_POS)
|
2018-04-17 20:30:17 -05:00 |
|
Scott Lahteine
|
8cf6ef8411
|
Merge pull request #10431 from thinkyhead/bf1_fix_and_improve
[1.1.x] Improve UBL mesh report, M420 V T, M421 N, and…
|
2018-04-17 16:59:14 -05:00 |
|
Scott Lahteine
|
fa3c14fccf
|
Fix compile warnings in fastio.h
Based on #10440 by @GMagician
|
2018-04-17 16:36:19 -05:00 |
|
Scott Lahteine
|
773d773baa
|
Fix compile error in tmc_status
|
2018-04-17 16:15:53 -05:00 |
|
Scott Lahteine
|
5c186f7dd3
|
Try FIXFLOAT rounding based on sign
|
2018-04-17 15:59:49 -05:00 |
|
Scott Lahteine
|
77b75ce86c
|
One fewer compare in _lcd_move_xyz
|
2018-04-17 15:55:43 -05:00 |
|
Scott Lahteine
|
6f156d01d9
|
Update position for UBL non-segmented activate/deactivate
|
2018-04-17 15:55:43 -05:00 |
|
Scott Lahteine
|
c0f6eebded
|
Improve UBL mesh report. Add M420 T, M421 N
|
2018-04-17 15:55:38 -05:00 |
|
Scott Lahteine
|
6786101c64
|
Ignore LCD_BED_LEVELING with UBL
|
2018-04-17 15:54:25 -05:00 |
|
Scott Lahteine
|
ee21f44969
|
Tweak fwretract.retract debug, comments
|
2018-04-17 15:54:25 -05:00 |
|
Scott Lahteine
|
090e08ef3d
|
M221 with no parameters report flow
|
2018-04-17 15:54:25 -05:00 |
|
Scott Lahteine
|
444b6d6d83
|
Prevent delay when power is already on
Fix #10410
|
2018-04-17 04:36:14 -05:00 |
|
Scott Lahteine
|
f1dfc80332
|
Improved SENSORLESS_HOMING sanity check
|
2018-04-17 04:10:57 -05:00 |
|
Scott Lahteine
|
31261d0c17
|
Fix bug in Planner::set_position_mm
|
2018-04-16 02:05:48 -05:00 |
|
Thomas Moore
|
85d57f7a9e
|
[1.1.x] Change UBL default G29 P4 height to 0 (#9510)
|
2018-04-15 20:49:03 -05:00 |
|
Scott Lahteine
|
8a159dfec2
|
Remove Brazilian Portuguese duplicates
Followup to #10368
|
2018-04-15 19:16:01 -05:00 |
|
Scott Lahteine
|
d59ed4dce0
|
Abort SD printing more safely (#10405)
Allow the current command to complete when aborting an SD print, otherwise some commands (G28, G29, etc.) will cause trouble.
|
2018-04-15 18:26:25 -05:00 |
|
Vitorio Miguel Prieto Cilia
|
110e631656
|
Update pt-br translation (#10368)
|
2018-04-15 00:07:13 -05:00 |
|
Scott Lahteine
|
9769d799df
|
clear_block_buffer, kill_current_block in quick_stop
|
2018-04-13 22:05:58 -05:00 |
|
Scott Lahteine
|
a783caabac
|
Make sure ABL (manual) starts close to the bed
|
2018-04-13 20:19:49 -05:00 |
|
Roxy-3D
|
b978153ca4
|
Stow Probe at end of G29 J3
|
2018-04-13 14:46:40 -05:00 |
|
Scott Lahteine
|
090d72f591
|
[1.1.x] Add optional menu item to toggle software endstops (#10392)
|
2018-04-13 00:24:20 -05:00 |
|
Scott Lahteine
|
e3c2d43b2b
|
Tweak MBL move close to bed
|
2018-04-12 22:41:26 -05:00 |
|
Scott Lahteine
|
5274ab0ad5
|
MESH_BED_LEVELING before PROBE_MANUALLY
|
2018-04-12 22:26:56 -05:00 |
|
Scott Lahteine
|
59d9886473
|
Tweak MIN_STEPS_PER_SEGMENT sanity-check
|
2018-04-12 20:23:43 -05:00 |
|
Luc Van Daele
|
6e30d1bef1
|
[1.1.x] G33 MIN_STEPS_PER_SEGMENT (#10385)
|
2018-04-12 20:19:42 -05:00 |
|
Scott Lahteine
|
db81a1d4a2
|
Make sure MBL starts close to the bed
Fix #10390
|
2018-04-12 19:37:50 -05:00 |
|
Scott Lahteine
|
2edc13a0e2
|
Fix M118 parameter handling
Fix #10388
|
2018-04-12 19:06:41 -05:00 |
|
Scott Lahteine
|
8db9b800e7
|
Compress/update comments ubl_motion
…to fit more code on the screen and correct outdated commentary contrasting ABL.
|
2018-04-12 18:08:33 -05:00 |
|
Luc Van Daele
|
21971f2f7a
|
Overhaul of G33 Delta Calibration (#8821)
|
2018-04-11 19:12:56 -05:00 |
|
Luc Van Daele
|
b2265869b2
|
Low Point for delta calibration (#10362)
|
2018-04-11 18:03:34 -05:00 |
|
Scott Lahteine
|
f408863043
|
Fix Spanish MSG_[ABC] items
|
2018-04-11 15:21:08 -05:00 |
|
Scott Lahteine
|
336131fb37
|
Trailing whitespace
|
2018-04-11 00:27:43 -05:00 |
|
Scott Lahteine
|
808d6f367b
|
Tweak RAMPS SDSS pins
|
2018-04-10 16:46:17 -05:00 |
|
Scott Lahteine
|
00d03c6dc5
|
Merge pull request #10350 from thinkyhead/bf1_z_probe_low_point
[1.1.x] Z_PROBE_LOW_POINT to prevent probe/bed damage
|
2018-04-09 18:24:38 -05:00 |
|