MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
2,830 Commits 1 Branch 0 Tags 96 MiB
a98183b463
Commit Graph

2287 Commits

Author SHA1 Message Date
Scott Lahteine
02b4f5f9cd Merge pull request #1689 from AnHardt/MAXand161 
Fix MAX6675 again and introduce set_current_temp_raw()
 2015-03-25 20:23:51 -07:00
AnHardt
f680e509c4 Enclosed error-messages for TEMP_SENSOR_1_AS_REDUNDANT in PSTR() 2015-03-25 23:26:06 +01:00
Victor Torre
d43d47da14 Clean "fromsd" array is not SDSUPPORT 
if not have SDSUPPORT the fromsd array is not necessary
 2015-03-25 22:05:18 +01:00
AnHardt
ac81b4084f Make variables and function static. 2015-03-25 21:37:15 +01:00
alexborro
55025558dc Implement Dry-Run mode in G29 
It just probe all the bed without appliying the matrix.
Useful after a first G29 to check the topology.
 2015-03-25 11:12:30 -03:00
wurstnase
a4ad9117dd comment #define Z_DUAL_STEPPER_DRIVERS 2015-03-25 13:46:29 +01:00
chris-bo
2dfd0e5ce7 Update Configuration.h 
documentation how to disable buzzer feedback
 2015-03-25 12:44:29 +01:00
Christian Bohn
4c3cbc0961 use only one implementation for beeper feedback 2015-03-25 12:23:50 +01:00
AnHardt
01cc97a3c3 Corected condition for PIDdT 2015-03-25 12:08:23 +01:00
AnHardt
94330705c7 Move definition of PIDdT back to temperature.h 
make it unconditional
remove all definitions in the 'Configuration.h's
remove form 'Conditionals.h'
 2015-03-25 11:51:41 +01:00
AnHardt
dd0067afa6 Fix MAX6675 again and introduce set_current_temp_raw() 
to make the temperature-code work again with Arduino 1.0.6.

Sorry could not make an extra block on base level.
 2015-03-25 11:08:24 +01:00
AnHardt
8848b7e9ef Add the missed {} to END_MENU in ultralcd.cpp 
what caused an extra update of encoderLine most of the time.
 2015-03-25 09:48:21 +01:00
AnHardt
4beffbca69 Make SMALL_INFOFONT configurable. 
Tweak the documentation
 2015-03-24 23:40:04 +01:00
alexborro
c2ba5d0c09 Fix ZigZag and Topograph table 
ZigZag: Inverted Behavior.. If T supplied, it does not zigzag.
Topograph table: The table was rotated 90º clockwise.
 2015-03-24 15:50:31 -03:00
alexborro
0ce3576685 New Feature: Z_DUAL_ENDSTOPS 
Z_DUAL_ENDSTOPS is a feature to enable the use of 2 endstops for both Z
steppers - Let's call them Z stepper and Z2 stepper.
That way the machine is capable to align the bed during home, since both
Z steppers are homed.
There is also an implementation of M666 (software endstops adjustment)
to this feature.
After Z homing, this adjustment is applied to just one of the steppers
in order to align the bed.
One just need to home the Z axis and measure the distance difference
between both Z axis and apply the math: Z adjust = Z - Z2.
If the Z stepper axis is closer to the bed, the measure Z > Z2 (yes, it
is.. think about it) and the Z adjust would be positive.
Play a little bit with small adjustments (0.5mm) and check the
behaviour.
The M119 (endstops report) will start reporting the Z2 Endstop as well.
 2015-03-24 14:06:44 -03:00
AnHardt
c686069ccd Revert "Remove 6x9 font" 
This reverts commit e6cb8ee188.

Conflicts:
	Marlin/dogm_lcd_implementation.h
Confilkt solved
Needs rework.
 2015-03-24 17:13:05 +01:00
AnHardt
b00a531df8 Revert "Removed now unneded FONT_STATUSMENU" 
This reverts commit 8c5bb38748.
 2015-03-24 17:01:56 +01:00
AnHardt
9d589cbb2a Merge https://github.com/MarlinFirmware/Marlin into tm3-utf-minus-kanji 
Conflicts:
	Marlin/example_configurations/delta/generic/Configuration.h
	Marlin/example_configurations/delta/kossel_mini/Configuration.h
	Marlin/language.h

Conflicts solved
 2015-03-24 16:59:15 +01:00
Scott Lahteine
8db4fd7177 Merge branch 'Development' into planner_oh_planner 
Latest upstream commits
 2015-03-23 22:08:50 -07:00
Scott Lahteine
0d81abe1c9 Merge branch 'Development' into config_testing 
Latest upstream commits
 2015-03-23 21:13:04 -07:00
Scott Lahteine
01740fd9c6 Merge branch 'Development' into planner_oh_planner 
Latest upstream commits
 2015-03-23 21:12:36 -07:00
Scott Lahteine
fc53e43de6 Don't test raw temp for MAX6675 
- Remove test of raw temp for thermistor 0 when using MAX6675
- Longer `raw_temp_value` array for `TEMP_SENSOR_1_AS_REDUNDANT`
 2015-03-23 20:55:48 -07:00
Scott Lahteine
03fa9fae9f Merge branch 'Development' into fix_temperature_minmax 
Latest upstream commits
 2015-03-23 20:42:48 -07:00
Scott Lahteine
1fac388664 Revert measurement loop 2015-03-23 15:18:22 -07:00
nicolas-rambaud
37cde8a191 Report changes from previous PR from old code base including : 
I've updated the minimum values from the LCD.
It has been a while that i want to at least fix this.
I have an inductive probe and often i need to set my zOffset to something lower than 0.5.
With the current implementation, the default LCD value is set to 0.5 for some reason.
On my case i need to be able to set it down to 0.0 as my inductive probe can be lower than 0.5.
Before with the LCD we couldn't change this value below 0.5. We had to flash the firmware every time which was painful.
Now we are able to change this value down to 0.0 if needed.
I've also changed the minimum value for Z min acceleration.
In the default configuration it's set to 25 but on the LCD the minimum was 100 which is not coherent.
I've changes the minimum to 10. On this axis, depending on the mechanics/motor drivers we might require very low acceleration, so i guess 10 is somehow realistic.
 2015-03-23 12:29:12 +01:00
Scott Lahteine
b26a3ea02c Merge pull request #1662 from josla972/refactor_scara 
Refactor SCARA calibration. Save some lines of code and possibly ROM.
 2015-03-23 00:51:18 -07:00
wurstnase
e6f6c6e3a1 fix bad insertion config again 2015-03-23 08:32:48 +01:00
Scott Lahteine
6bdee87be3 Cleanup temperature code 
- Get rid of unused temp states in the ISR, resulting in more frequent
temperature reading with fewer sensors
- Shrink code slightly in min/max testing
 2015-03-23 00:27:29 -07:00
Scott Lahteine
34a41648ab Merge branch 'Development' into planner_oh_planner 
Latest upstream commits
 2015-03-22 23:40:29 -07:00
Scott Lahteine
4fbb80567e Get upstream commits 2015-03-22 23:07:22 -07:00
Scott Lahteine
7717e1ce33 Fix bad insert in configuration 2015-03-22 21:48:46 -07:00
Scott Lahteine
146501215f Fix mangled probe_pt calls 
- Address issue #1669
- Remove the TOPO_ORIGIN configuration setting
 2015-03-22 21:45:20 -07:00
maverikou
15345cc249 Corrected Z_PROBE_ALLEN_KEY behaviour. 2015-03-22 13:54:51 +02:00
maverikou
0f034dd97e Clean up Z_RAISE_AFTER_PROBING to work the same in all code paths except Z_PROBE_SLED. 2015-03-22 13:54:45 +02:00
maverikou
6c96f32069 Blind fix for #1507 2015-03-22 13:54:21 +02:00
Josef Larsson
379348487e Removed malplaced comment. 2015-03-22 12:21:31 +01:00
Scott Lahteine
8bd6e37b21 Merge pull request #1661 from thinkyhead/G92_no_offset 
Don't add home offsets in G29
 2015-03-21 16:49:06 -07:00
Scott Lahteine
582cd780cd Fix compile error with *_DUAL_STEPPER_DRIVERS 
- Patch up macros in stepper.cpp
 2015-03-21 16:43:47 -07:00
Josef Larsson
9b3462f73f Refactor SCARA calibration. Save some lines of code and possibly ROM. 2015-03-22 00:37:24 +01:00
Scott Lahteine
691e753cc3 Don't add home offsets in G29 
- Address #1262 by leaving values as set
- Rename `add_homing` to `home_offset`
 2015-03-21 16:30:02 -07:00
Scott Lahteine
88e81a4804 Latest upstream commits, plus fixes 
- Also add Manual Bed Leveling to the rest of the configs
 2015-03-21 16:12:57 -07:00
Scott Lahteine
15eb5d35a2 Merge branch 'Development' into config_testing 
Latest upstream commits
 2015-03-21 15:42:45 -07:00
Scott Lahteine
19df90622b Include Conditionals.h file in update 2015-03-21 15:40:20 -07:00
Scott Lahteine
9b639b4135 Merge pull request #1619 from epatel/manual-bed-leveling+mesh-bed-level 
Manual bed leveling + mesh bed leveling
 2015-03-21 15:39:42 -07:00
Scott Lahteine
2c9bd15625 Move LCD items to Conditionals.h 
- `Conditionals.h` is included twice, setting LCD values the first time
 2015-03-21 15:24:57 -07:00
Scott Lahteine
63abeaff38 Merge branch 'Development' into config_testing 
Latest upstream commits
 2015-03-21 15:03:06 -07:00
Scott Lahteine
3703694e30 Fix temperature min/max test 
- Base tests on all thermistors/thermocouples, not just heater 0
 2015-03-21 14:23:43 -07:00
Edward Patel
3d0a060a7a Added G29 command 2015-03-21 14:50:47 +01:00
Edward Patel
c516747847 Merge branch 'Development' into manual-bed-leveling+mesh-bed-level 2015-03-21 14:49:52 +01:00
Scott Lahteine
af14c684b5 Minor optimizations to planner code 
- Prefetch values used more than once
 2015-03-20 20:57:06 -07:00
Scott Lahteine
13fbf42d95 Cleanup of planner code 
- Use named axis indexes, `X_AXIS` etc.
- Replace `block.steps_A` with block.steps[A]`
- Replace `A_segment_time` with `segment_time[A]`
- Add `A_AXIS`, `B_AXIS` for `COREXY` axes
- Conditional compile based on `EXTRUDERS`
- Add BLOCK_MOD macro for planner block indexes
- Apply coding standards to `planner.h` and `planner.cpp`
- Small optimizations of planner code
- Update `stepper.cpp` for new `block` struct
- Replace `memcpy` with loops, let the compiler unroll them
- Make `movesplanned` into an inline function
 2015-03-20 20:42:49 -07:00
AnHardt
64e3d33893 Fix shrinked menucode 
by updating 'encoderPosition' in END_MENU() line 1.
 2015-03-20 23:36:14 +01:00
Edward Patel
a7e89d4cfa Merge branch 'Development' into manual-bed-leveling+mesh-bed-level 2015-03-20 15:46:01 +01:00
AnHardt
8c5bb38748 Removed now unneded FONT_STATUSMENU 2015-03-20 14:12:12 +01:00
Scott Lahteine
2176a22d42 Fix count_direction initializer 
- Addressing #1625
 2015-03-20 05:45:05 -07:00
AnHardt
e72cb3e45d Merge https://github.com/MarlinFirmware/Marlin into tm2-utf-minus-kanji 
Conflicts:
	Marlin/dogm_lcd_implementation.h
	Marlin/ultralcd_implementation_hitachi_HD44780.h

Fix merge conflicts 2
 2015-03-20 13:35:47 +01:00
Scott Lahteine
cb6942d4a7 Merge branch 'Development' into config_testing 
Get upstream commits
 2015-03-20 05:30:36 -07:00
AnHardt
6bfccaf99e Merge https://github.com/MarlinFirmware/Marlin into tm2-utf-minus-kanji 
Conflicts:
	Marlin/dogm_lcd_implementation.h
	Marlin/ultralcd_implementation_hitachi_HD44780.h
Fixed conflicts 1
 2015-03-20 13:08:18 +01:00
Scott Lahteine
5644ad6809 Fix hiliting of edit items 2015-03-20 04:29:35 -07:00
Scott Lahteine
63d5d28085 Merge branch 'Development' into config_testing 
Latest upstream changes
 2015-03-20 04:15:18 -07:00
Scott Lahteine
526a755a66 Merge pull request #1652 from AnHardt/PIDdebug 
PID debug
 2015-03-20 04:14:08 -07:00
Scott Lahteine
a1c240b0a4 Delta supports some auto bed leveling options 2015-03-20 04:04:45 -07:00
Edward Patel
5112cf8422 Added comment for the EEPROM storage 2015-03-20 11:46:47 +01:00
Edward Patel
4619d80524 Merge branch 'Development' into manual-bed-leveling+mesh-bed-level 2015-03-20 11:45:06 +01:00
Scott Lahteine
199151a4ed Merge pull request #1650 from AnHardt/beautify 
Beautivy statusscreen
 2015-03-20 03:38:02 -07:00
Scott Lahteine
2424713a8f Merge pull request #1640 from AnHardt/warning6 
codepos not used in gcode_M28()
 2015-03-20 02:58:00 -07:00
Scott Lahteine
b6d381f863 Divide up Conditionals to get LCD items early 2015-03-20 02:50:28 -07:00
AnHardt
e85061d20d Added changes to the 'new' Configuration.h s 2015-03-20 10:36:29 +01:00
Scott Lahteine
33c7c6e11d Conditionals.h requires Arduino.h 2015-03-20 01:27:14 -07:00
Scott Lahteine
8ade04b78e Felix and Hephestos configs 
- Not sure why these are showing as all new
 2015-03-19 22:25:05 -07:00
Scott Lahteine
670006b919 Remove invariant code from Configurations 
- Add `Conditionals.h` with calculated configuration values
- Add `SanityCheck.h` with checks for configuration errors
- Remove equivalent code from all configurations
- Move error checks from some sources to `SanityCheck.h` also
- Fix initialization of count_direction in stepper.cpp
 2015-03-19 22:22:23 -07:00
Edward Patel
a61f679568 Merge branch 'Development' into manual-bed-leveling+mesh-bed-level 2015-03-20 02:28:35 +01:00
Edward Patel
c87faa69ed Shortened mesh_plan_buffer_line() 2015-03-20 02:18:49 +01:00
AnHardt
47c1ea72af Merge https://github.com/kieranc/Marlin into PIDdebug 
Conflicts:
	Marlin/temperature.cpp

Cleaned merge conflict.

Codeposition had changed.
Variable pid_input had vanished.

Signed-off-by: AnHardt <github@kitelab.de>
 2015-03-20 00:07:36 +01:00
AnHardt
f1d3d1524d Merge branch 'optimize_menu_code' of https://github.com/thinkyhead/Marlin into beautify 
Conflicts:
	Marlin/dogm_lcd_implementation.h

solved merge conflict.
 2015-03-19 22:51:22 +01:00
AnHardt
fa889cd6e1 Beautivy statusscreen 
by shifting things some pixels around
 2015-03-19 22:13:37 +01:00
Scott Lahteine
7279e4f82f Small code tweaks re lcd.print 2015-03-19 14:01:33 -07:00
Scott Lahteine
90ba61b9b8 Include indicator for new drawmenu_generic 
In the new method we pass the character that should be used for
selected state, not the character to print always.
 2015-03-19 13:49:06 -07:00
Scott Lahteine
15d29efad5 Pass sel to lcd_implementation_mark_as_selected 
- Pass selected state directly to lcd_implementation_mark_as_selected
- Rename sel function parameter
- Include a minor fix for SdBaseFile.h
 2015-03-19 13:40:36 -07:00
Scott Lahteine
a547dc2148 Merge branch 'Development' into optimize_menu_code 
Get upstream changes
 2015-03-19 13:31:37 -07:00
alexborro
e650d4044e Fix "Stop Print" function in the LCD menu 
When one hit "Stop Print" option in LCD menu, the command buffer was not
cleared. The printer keep moving until the buffer has been emptied.
Actually I could not clear the command buffer as well.. I don't know
why, it doesnt work as expected.
I need to implement a routine inside Stepper ISR to handle such
situation.
 2015-03-19 14:16:18 -03:00
AnHardt
e917477fec Merge https://github.com/MarlinFirmware/Marlin into tm-utf-minus-kanji 
Conflicts:
	Marlin/dogm_lcd_implementation.h
	Marlin/fonts/make_fonts.bat

Claerd conflicts with my own #1621. (His was easy. :-) )

corrected typo in fonts/README.fonts

Applied changes to the new delta-configurations
 and deletet there some extra whitespace at the line-endings.
 2015-03-19 12:35:43 +01:00
AnHardt
ae01a6b5f2 Make use of codepos. 
Saves one addition.
Needs one pointer on the stack.

Don't know if this is a go trade.
 2015-03-19 09:45:16 +01:00
Scott Lahteine
a534ac197a Merge pull request #1621 from AnHardt/remove--6x9-font 
Remove 6x9 font
 2015-03-18 23:10:42 -07:00
Scott Lahteine
80e0ee10ca Merge pull request #1631 from AnHardt/iss1593 
Decrease KILL_DELAY
 2015-03-18 19:10:38 -07:00
Scott Lahteine
4ce79920e5 Merge pull request #1635 from AnHardt/warnings1 
Negative times are unlikly
 2015-03-18 19:10:12 -07:00
Scott Lahteine
76127b8a55 Merge pull request #1630 from Wurstnase/fix_g29 
optional parameters must be named when ignoring order
 2015-03-18 19:09:40 -07:00
Scott Lahteine
be3f2dc1d9 Merge pull request #1636 from AnHardt/warning2 
lcd_control_retract_menu() is conditional.
 2015-03-18 19:09:05 -07:00
Scott Lahteine
8d396584bf Merge pull request #1637 from AnHardt/warning3 
lcd_autostart_sd() has two conditions.
 2015-03-18 19:08:33 -07:00
Scott Lahteine
8664c6d465 Merge pull request #1638 from AnHardt/warning4 
delta[3] not used when DELTA not defined.
 2015-03-18 19:07:55 -07:00
Scott Lahteine
10711ccc6a Merge pull request #1639 from AnHardt/warning5 
G4 could wait for an undefined time
 2015-03-18 19:07:14 -07:00
Edward Patel
28c91deb5c EEPROM saving of z_values. 
Tried to make it a little intelligent.
 2015-03-18 21:07:07 +01:00
Edward Patel
240b5cfe04 Merge branch 'Development' into manual-bed-leveling+mesh-bed-level 2015-03-18 19:19:46 +01:00
alexborro
4521f6655b Restore "S" parameter of M204 for retrocompatibility. 2015-03-18 12:19:30 -03:00
alexborro
5ddb8d94e2 Update Documentation related to M204 2015-03-18 11:09:10 -03:00
AnHardt
f8c4d43886 delta[3] is used with SCARA 
Shoot in the dark.
 2015-03-18 12:14:49 +01:00
AnHardt
72a9fed4fb codepos not used in gcode_M28() 
Got:
Marlin_main.cpp:2567: warning: unused variable 'codepos'

Needs revision.
Don't now how this should look like.
 2015-03-18 11:41:14 +01:00
AnHardt
b94dd33641 G4 could wait for an undefined time 
Got:
Marlin_main.cpp:1689: warning: 'codenum' may be used uninitialized in this function

And indeed codenum is undefined when no parameter is given.
 2015-03-18 11:23:41 +01:00
AnHardt
e90985a4e8 delta[3] not used when DELTA not defined. 
got:
Marlin_main.cpp:387: warning: 'delta' defined but not used

Compiles cleaner when definition is removed.
 2015-03-18 11:11:49 +01:00
AnHardt
5099b86ad4 lcd_autostart_sd() has two conditions. 
got:
ultralcd.cpp:408: warning: 'void lcd_autostart_sd()' defined but not used
 2015-03-18 10:51:13 +01:00
AnHardt
5d81c779cc lcd_control_retract_menu() is conditional. 
Got:
ultralcd.cpp:64: warning: 'void lcd_control_retract_menu()' declared 'static' but never defined
 2015-03-18 10:39:59 +01:00
AnHardt
450b89e63c Negative times are unlikly 
While bunting an other bug I stumbled across:
ultralcd.cpp:1250: warning: comparison between signed and unsigned
integer expressions
Changed to the type of lcd_next_update_millis.
 2015-03-18 10:31:34 +01:00
AnHardt
d1658eebfc Decrease KILL_DELAY 
Users hat to press kill-button for unexpexted lon times.
See #1593
 2015-03-18 01:45:42 +01:00
Wurstnase
00adb2a6c1 optional parameters must be named when ignoring order 2015-03-18 01:02:29 +01:00
Edward Patel
0d43898a22 Remove of mesh_plan_buffer_line parameter reference (e) 2015-03-17 22:55:29 +01:00
Edward Patel
8067a985ce Merge branch 'Development' into manual-bed-leveling+mesh-bed-level 
Fixed conflicts:
	Marlin/planner.h
 2015-03-17 22:48:08 +01:00
wurstnase
05333f61b7 fix macro 2015-03-17 12:50:44 +01:00
AnHardt
1883e1bb60 Applied thinkyheads corrections from 2015-03-17 2015-03-17 11:23:44 +01:00
AnHardt
be79235ef2 Add new (cleaner) Marlin font 
with sources in /fonts
 2015-03-17 10:33:02 +01:00
Scott Lahteine
89fe77468d Merge pull request #1586 from maverikou/delta_auto_bed_level 
Delta auto bed level (Updated PR)
 2015-03-16 18:17:11 -07:00
alexborro
cb676cdf39 Fix CoreXY homing bug introduced by PR #1606 
The Check Endstop logic must be:

if (current_block->steps_x != current_block->steps_y || (TEST(out_bits,
X_AXIS) == TEST(out_bits, Y_AXIS)))
if (TEST(out_bits, X_HEAD))

not

if (TEST(out_bits, X_HEAD) && (current_block->steps_x !=
current_block->steps_y || (TEST(out_bits, X_AXIS) == TEST(out_bits,
Y_AXIS))))

Same applies for Y axis.
 2015-03-16 16:31:25 -03:00
AnHardt
8a29dd4839 Cleaned typo in dogm_lcd_implementation.h 2015-03-16 20:18:48 +01:00
AnHardt
7e69f72db6 Moved font directory. Updated README.fonts 2015-03-16 17:27:27 +01:00
AnHardt
00b162a993 Merge remote-tracking branch 'origin/utf-kanji' into tm-utf-minus-kanji 
Conflicts:
	Marlin/language.h
Conflict cleaned
 2015-03-16 17:13:49 +01:00
AnHardt
e38dd5f030 Merge remote-tracking branch 'origin/utf' into utf-kanji 2015-03-16 17:00:54 +01:00
AnHardt
08e4651ece Corrected cyrillic font again 
Thank you @Nprod.
 2015-03-16 16:59:14 +01:00
Wurstnase
752c804677 remove offset, add minimum scan area 2015-03-16 15:13:16 +01:00
Wurstnase
14f0250853 allow negative values 
and some more comments
 2015-03-16 14:26:59 +01:00
AnHardt
e6cb8ee188 Remove 6x9 font 
in dogm_lcd_implementation.h
by using standard font and
shifting down temperature displays by one pixel
Saves 2300 bytes.
 2015-03-16 11:18:27 +01:00
maverikou
e93eb3e8d3 Update test 2015-03-16 09:16:00 +02:00
maverikou
b8ae3feb9e Update test 2015-03-16 09:03:15 +02:00
maverikou
3570447ded Fix Z_RAISE_AFTER_PROBING 2015-03-16 08:35:49 +02:00
maverikou
8a739b6fba Merge branch 'Development' into delta_auto_bed_level 
Conflicts:
	Marlin/Marlin_main.cpp
 2015-03-16 08:24:26 +02:00
Scott Lahteine
7629c4f05c Cleanup for menu optimization 
- Compare pr_char to space
- Fewer calls to lcd_strlen
 2015-03-15 22:54:54 -07:00
Scott Lahteine
3405f85a6a Reduce size of menu code 
- Get rid of _selected functions, passing selected state instead
 2015-03-15 22:02:33 -07:00
Edward Patel
e983a5ab92 Disable option. Enable for use/test. 2015-03-16 02:50:11 +01:00
Edward Patel
f34b9c83d1 Added comment about MESH_NUM axis points. 2015-03-16 01:48:46 +01:00
Scott Lahteine
a686c9878f Move TOPO_ORIGIN define to Configuration.h 
- Addressing issue #1608
 2015-03-15 15:49:36 -07:00
Edward Patel
8005d22c81 Added menu option for bed leveling. 2015-03-15 23:24:32 +01:00
Edward Patel
0e51e53813 WIP. Adding bed leveling code. 2015-03-15 23:24:32 +01:00
Scott Lahteine
d0d12962e0 Merge pull request #1615 from AnHardt/fix-1611 
Fix #1611
 2015-03-15 15:19:02 -07:00
AnHardt
f0dcea7e14 Fix #1611 
Warning: suggest parentheses around comparison in operand of &

pretty much helped.
 2015-03-15 22:52:50 +01:00
AnHardt
28b1c37dea Fix for #1612 2015-03-15 21:35:33 +01:00
AnHardt
2f374f1465 Removed Kanji. 2015-03-15 16:44:37 +01:00
Scott Lahteine
5efc798642 Merge pull request #1546 from apollo-ng/pr-felix 
Added support for Felix 2.0/3.0 printers
 2015-03-15 07:52:22 -07:00
Scott Lahteine
b83e52e50f Merge pull request #1467 from thinkyhead/marlin_configurator 
Configurator utility
 2015-03-15 07:49:19 -07:00
Scott Lahteine
7bc77dc134 Merge pull request #1583 from galexander1/m404fix 
M404 should not use 'N' address as parameter because 'N' is reserved
 2015-03-15 07:47:30 -07:00
Scott Lahteine
b80ed51fcc Fix controllerFan() code 
- Add support for 4th extruder
- Fix parentheses matching
- Apply coding standards
- Address issue mentioned at #1575
 2015-03-15 06:55:31 -07:00
Scott Lahteine
4b50205f11 Merge branch 'Development' into marlin_configurator 
Latest upstream changes
 2015-03-15 06:37:32 -07:00
Scott Lahteine
bb4cb1b15a Merge pull request #1606 from thinkyhead/cleanup_stepper 
Cleanup of stepper.cpp
 2015-03-15 06:05:08 -07:00
Scott Lahteine
63f41f56f8 Merge pull request #1607 from chris-bo/Development 
Update ultralcd_st7920_u8glib_rrd.h
 2015-03-15 01:04:40 -07:00
Scott Lahteine
4eabd80025 Fix babystep for extruder_duplication 2015-03-14 18:31:25 -07:00
alexborro
d3259d0dba Merge pull request #1581 from msutas/Development 
Filament Runout Sensor Feature
 2015-03-14 18:35:20 -03:00
AnHardt
25c4f17e5d Corrected Cyrillic fonts. Round II. 2015-03-14 15:10:45 +01:00
chris-bo
b73ba26b23 Update ultralcd_st7920_u8glib_rrd.h 2015-03-14 14:31:00 +01:00
Scott Lahteine
c37f7d15c9 - Rename WRITE_E_STEP for consistency 
- Add BIT and TEST macros
- Add _APPLY_ macros to stepper.cpp to help with consolidation
- Consolidate code in stepper.cpp using macros
- Apply standards in stepper.cpp
- Use >= 0 instead of > -1 as a better semantic
- Replace DUAL_Y_CARRIAGE with Y_DUAL_STEPPER_DRIVERS
 2015-03-14 04:28:22 -07:00
AnHardt
44a205d9d9 Corrected Cyrillic fonts. 
Cleaned typo in language_test.h Cyrillic part.
 2015-03-14 12:27:47 +01:00
chrono
4d878b9bac Fixed path typos in README 2015-03-14 10:18:12 +00:00
chrono
12ec557a75 Added DEFAULT_TRAVEL_ACCELERATION 2015-03-14 10:14:13 +00:00
chrono
1d25d510bc Upstream Merge Fixes 2015-03-14 09:48:30 +00:00
chrono
a89d690b77 Merge remote-tracking branch 'upstream/Development' into pr-felix 2015-03-14 09:25:43 +00:00
Scott Lahteine
cb57fc727d Declare pid_output for PIDBEDTEMP 2015-03-13 20:19:51 -07:00
Scott Lahteine
3d6deb9bdf Simplify manage_heater 
- Make separate get_pid_output(e) and get_pid_output_bed() function
- Reduce size of manage_heater function
- Hopefully work around linker errors
 2015-03-13 19:49:41 -07:00
AnHardt
730497aaa1 Make use of ligatures in language_kana_utf8.h 2015-03-13 19:47:40 +01:00
AnHardt
3240d89f7d Logic cleanup in utf_mapper. 2015-03-13 19:45:10 +01:00
alexborro
2f3c77b751 Fix decimal places in G29 Bed Equation Coeficients 2015-03-13 14:39:41 -03:00
AnHardt
96f8d20f2f Change selection logic another time 
Automatic selection was to unflexible.

Updated documentation

Updated language files to new logic and documentation.

Updated bdf2u8g.exe
 2015-03-13 14:26:58 +01:00
Wurstnase
76da32b567 add hash-bang for python3 2015-03-13 07:44:20 +01:00
Wurstnase
2e7ba44633 some renaming for readability 2015-03-13 07:31:27 +01:00
Scott Lahteine
352aa3f4c5 Merge branch 'Development' into marlin_configurator 
Latest upstream
 2015-03-12 17:12:51 -07:00
Scott Lahteine
e3ca9137b5 Fix missing temp_error declarations 
- Fix for #1591 replacing #1595
 2015-03-11 16:38:42 -07:00
Wurstnase
0620267ebb g29 auto-mode for the new G29 LRFB 
short:
this script scans the first few lines from a gcode. If the line between 2 different z are greater than min_g1 this is our first layer. On this layer we search the min and max values of X and Y. With an offset we write that in a new file.
 2015-03-11 23:53:28 +01:00
Scott Lahteine
08694339eb Merge branch 'Development' into marlin_configurator 
Conflicts:
	Marlin/Configuration.h
 2015-03-11 15:47:32 -07:00
Scott Lahteine
e4d77a6313 Merge pull request #1554 from 2PrintBeta/Development 
Macro indirection for stepper drivers + Support for TMC26X and L6470 Stepper Drivers
 2015-03-11 15:31:57 -07:00
Mehmet Sutas
b373826428 Merge pull request #2 from MarlinFirmware/Development 
update
 2015-03-12 00:07:39 +02:00
AnHardt
5bafb1fe1f Add user test to language_test.h and make it default. 
Improve description in Configuration.h
 2015-03-11 20:46:52 +01:00
alexborro
c0b6075f77 Fix max acceleration limits in planner 
The max acceleration limiting was in wrong place.
 2015-03-11 15:08:11 -03:00
alexborro
9157cbd8f3 Add Travel Acceleration and change the M204 options 
Added option to set Travel Acceleration (non printing moves).
The M204 options was a non sense (S for printing moves and T for retract
moves).

It has been changed to:
P = Printing moves
R = Retract only (no X, Y, Z) moves
T = Travel (non
printing) moves

I will add this info o G-Code wiki in reprap.org. I also advise to put
this info in Marlin next version changelog.
 2015-03-11 13:19:02 -03:00
alexborro
888cf161bd fix travel speed option for G29 
I forgot to enclousure the variable with #ifdef
 2015-03-11 10:03:32 -03:00
alexborro
af63b54562 Add travel speed option to G29 command line 2015-03-11 09:51:56 -03:00
AnHardt
817751d4b9 Added new languages, the Cyrillic display and a test language to find out your hardware. 2015-03-11 11:10:35 +01:00
AnHardt
c4b0087f7a Insert utf_mapper.h 
Top -> down
- Decide what output function is to use.
- Precautions. If non of the DISPLAY_CHARSET_HD44780's is selected fall back to Japanese.
- When we are not on the dogms setup a mapping table depending on display type and mapper.
- If we are on dogm we use ONE To ONE mapping - except kanji.
- select and define one of the mapping functions.
 2015-03-11 10:55:16 +01:00
AnHardt
b60761bcff Removed some messages that shouldn't be translated in the Japanese files. 
And made falback to kana work.
 2015-03-11 10:30:38 +01:00
AnHardt
97ae3c5c6a Corected some errors inrtoduced by a faild global replacement. 2015-03-11 10:26:36 +01:00
AnHardt
ae76b1e8a8 Changes in dogm_lcd_implementation.h in detail. 
Top -> down
- We don't need the old Marlion_font package any more - we made new.
- But we need information about configured fonts and the mappers.
- We support Cyrillic now.
- LCD_CLASS is not used in this file. LiquidCrystalRus.h is deleted anyway.
- define some fonts
- BIG_EDIT_FONT works only together with western languages.
- Select a matching FONT for the MENUE depending on the defined language.
- Number the different font-types. Wanted to avoid to store complete font-structures when changing fonts back and forth.
- Marlin special symbols are now at the lower end - like in 'ultralcd_implementation_hitachi_HD44780.h'
- insert the new remembering setFont function.
- insert the new counting lcd_print functions.
- make use of the new setFont and lcd_print functions.
- On some places redefined one character long strings with chars to avoid overhead and reduce warnings.
 2015-03-10 22:34:56 +01:00
alexborro
5bf42066fa Fix typo in configuration.h 2015-03-10 15:06:34 -03:00
alexborro
8a4b62d081 Set more regular setup in configuration.h 2015-03-10 14:41:21 -03:00
AnHardt
255ca68123 Changes in ultralcd_implementation_hitachi_HD44780.h in detail 
Top -> down:
We don't need LiquidCrystalRus.cpp and LiquidCrystalRus.h any more. Functionality is now in utf_mapper.h
Comment on LCD_STR_BEDTEMP about behaviour in strings.
Change LCD_STR_ARROW_RIGHT from "\x7E" to ">" because "\x7E" is only ARROW_RIGHT on displays with DISPLAY_CHARSET_HD44780_JAPAN.
Introduce the counting UTF8 enabled lcd_print functions.
Replace the old lcd.print functions and make use of them.
A bit of reformatting around the changes.
 2015-03-10 18:30:09 +01:00
alexborro
60ceca1bc1 Add speed configuration for home-bumping movement 2015-03-10 14:08:32 -03:00
AnHardt
6fc2ccd568 Make use of new remenbering fontswitch. 2015-03-10 18:04:03 +01:00
AnHardt
0f26f3abf2 Add a test_language. 
Will show the compleet utf8 or ASCII charset
To se the second half of ASCII click on "01234..."
 2015-03-10 17:59:28 +01:00
AnHardt
901cf203fe Add legal stuff to marlin_kanji.h 2015-03-10 17:49:16 +01:00
AnHardt
2d5134b0ed Introduce - clean - prepae language files 2015-03-10 17:46:25 +01:00
domonoky
d813090d90 Merge remote-tracking branch 'remotes/upstream/Development' into Development 
Conflicts:
	Marlin/Marlin_main.cpp
	Marlin/stepper.cpp
 2015-03-10 10:46:37 +01:00
Scott Lahteine
c321c97f35 Merge pull request #1584 from galexander1/stringcleanup 
fix a handful of cases where strtod() was cast to int, instead of just using strtol()
 2015-03-10 01:48:30 -07:00
maverikou
53abc5e2f1 Merge branch 'Development' into delta_auto_bed_level 2015-03-09 22:28:57 +02:00
Mehmet Sutas
956fb2d278 Merge pull request #1 from MarlinFirmware/Development 
update
 2015-03-09 11:05:49 +02:00
Scott Lahteine
978dadf806 Base64 decode AJAX-fetched text properly 2015-03-08 21:54:17 -07:00
Scott Lahteine
0eae9c24bc Merge pull request #1582 from galexander1/deltaconftypo 
fix typo in delta example config introduced in commit 697ee2d
 2015-03-08 21:13:14 -07:00
Scott Lahteine
624f23f550 Merge pull request #1575 from Wurstnase/fix-controllerFan 
Fix controller fan
 2015-03-08 20:36:38 -07:00
maverikou
424c747fb3 Enable M401 and M402 for deltas with allen key z-probes. 2015-03-08 09:57:38 +02:00
maverikou
0d593ab7c1 Fix debug message 2015-03-08 09:41:31 +02:00
Greg Alexander
3e8c5678f5 fix bug where, i.e., "G1X1E1" would be interpretted as "G1 X10 E1", 
because strtod() will read the E address value as if it was a base 10
exponent.
 2015-03-07 21:14:34 -05:00
Greg Alexander
ed7874b4e0 M404 should not use 'N' address as parameter because 'N' is reserved for the line number 2015-03-07 17:35:06 -05:00
Greg Alexander
b9dfa5cad4 use code_value_long() instead of (int)code_value() 2015-03-07 17:33:15 -05:00
Greg Alexander
901b03d020 use strtol() instead of strtod() when an integer value is desired 2015-03-07 17:24:26 -05:00
Greg Alexander
4fba7b084f fix typo in delta example config introduced in 
commit 697ee2dc50
 2015-03-07 16:43:41 -05:00
Mehmet Sutas
cfc6a3a87a Filament Runout Sensor Feature 
With this change a mechanical or optical switch may be used to check the
availability of the filament and when the filament runs out an M600
(filament change) command is issued. This is only done while printing
with an SD card.

This feature was requested several times (issue #679), but the requests
were not accepted since it was believed that this situation should be
handled at host side. However during an SD print the control is totally
on firmware and I think that during an SD print it should be handled by
the firmware.

The original code was posted at reprap forum
(http://forums.reprap.org/read.php?1,297350) by Lazymonk. I have only
corrected some bugs of the code and improved it by adding definitions to
the configuration.h in order to make it more standardized.
 2015-03-07 22:43:15 +02:00
maverikou
e6862700af Add Z_RAISE_AFTER_PROBING to all config files 2015-03-07 20:55:30 +02:00
maverikou
39d255608d Test an extra delta configuration with auto bed leveling code paths 2015-03-07 20:53:23 +02:00
maverikou
7c24b97958 Ported over Johann Rocholl's improvements for delta printers: 
- Nonlinear auto bed leveling code (includes G29, G30, Z_RAISE_AFTER_PROBING). Cleaned it up to be a delta-specific AUTO_BED_LEVELING_GRID code path.
- Allen key z-probe deployment and retraction code. Cleaned it up and added safety checks.
 2015-03-07 20:36:21 +02:00
Wurstnase
a5342c942e Update Marlin_main.cpp 2015-03-07 16:47:53 +01:00
Scott Lahteine
0f3b7d5575 Update annotated configurations 
- Also update base configs
 2015-03-07 01:07:40 -08:00
Scott Lahteine
c5aa56bc4d Merge branch 'Development' into marlin_configurator 
Latest upstream commits
 2015-03-06 23:00:03 -08:00
Scott Lahteine
d085725c86 More sanity-checking for ABL 
- Moved sanity-checks to Marlin_main.cpp
- Applied to other configuration files
- Fixed formatting of ABL output
- Passing verbose level to probe_pt
- Miscellaneous cleanup
- Put CONFIG_STEPPERS_TOSHIBA into Configuration.h
 2015-03-06 22:14:34 -08:00
Scott Lahteine
8b6766b37b Merge branch 'Development' into marlin_configurator 
Latest upstream changes
 2015-03-06 16:32:57 -08:00
Scott Lahteine
9eed8c8cf0 Make sure a ROM is selected for ULTRA_LCD 2015-03-06 15:37:54 -08:00
AnHardt
7136268273 Added 'dogm_font_data_6x10_marlin_Kanji.h' 
This is copied from http://www.thingiverse.com/thing:664397

// Japanese Original font
// Version 0.1 by ichibey
//
// 営利目的で利用する際は、かならず許可を得てください。非営利の場合は、CCライセンスに従い使用ください。
// http://creativecommons.org/licenses/by-nc/2.1/jp/legalcode

This font is very special. It uses a mixture of katakana an kanji symbols, uses multi character symbols and is only addressable by '\xxx' sequences.
 2015-03-07 00:26:28 +01:00
AnHardt
16e173e167 Added 5 new font.h files to main directory. 
The former place of 'dogm_font_data_6x9_marlin.h' was in 'dogm_font_data_m0arlin.h'.

Deleted 'dogm_font_data_marlin.h'.
 2015-03-07 00:09:49 +01:00
Scott Lahteine
254970c92a Merge pull request #1570 from C-o-r-E/escape_fix 
Fixes gCode handling of comments and escaped characters
 2015-03-06 15:09:35 -08:00
Scott Lahteine
25dc79f124 Remove M48 credits also 2015-03-06 14:54:30 -08:00
Scott Lahteine
34e51f576f Fix compile error in gcode_G29 
- A redo of #1576, which missed topo_flag
- Always set verbose_level
 2015-03-06 14:52:05 -08:00
AnHardt
b14270b029 Added font tools 2015-03-06 23:48:55 +01:00
AnHardt
fe2bd237d5 Add font sources. 
Fonts have been created with fony.exe (http://hukka.ncn.fi/?fony)

The HD44760_? fonts simulate the fonts of the character based displays.
The ISO10646 fonts provide the right size of the standard fonts.
Marlin_symbols contains only the the special symbols of the original marlin font.
 2015-03-06 23:36:56 +01:00
Scott Lahteine
344a12bd10 Merge pull request #1571 from AnHardt/Undubble 
Undubble MSG_MIN & MSG MAX
 2015-03-06 10:08:19 -08:00
Scott Lahteine
1149c24b86 More grouping, cleanup, start on overrides 2015-03-06 08:48:53 -08:00
Wurstnase
62bd734612 fix controllerFan() for inverted enable pins 
add ```^ !(n_ENABLE_ON)``` for each stepper
 2015-03-06 12:01:17 +01:00
AnHardt
3024f6c706 Undubble MSG_MIN &MSG MAX 2015-03-06 00:25:44 +01:00
Gina Häußge
63b62d8d4e Fixed in-line comments and escaping 
* "G1 X1 ; test" was not executing "G1 X1" due to never leaving comment mode.
  * "M117 Hello \;)" printed "Hello \" to the display due to not replacing serial_char properly.

Tested with the following commands:
    * M117 Hello ; test => displays "Hello" on display, ignores "test"
    * G1 X1 ; foo => moves 1mm in X, ignores "foo"
    * ; test => completely ignored, not even acknowledged
    * M117 Hello \;) => displays "Hello ;)" on display
    * M117 Hello \\;) => displays "Hello \" on display, ignores ")"
 2015-03-05 23:30:34 +01:00
C-o-r-E
99fb1bc3e8 Attempt to resolve #1568 and add basic escape character support 2015-03-05 15:22:37 -05:00
Scott Lahteine
fad14ae7eb Merge branch 'Development' into marlin_configurator 
Latest upstream changes
 2015-03-05 05:32:31 -08:00
Scott Lahteine
cdc38aa783 Move gcode handlers into inline functions 2015-03-05 04:27:24 -08:00
Scott Lahteine
6d9e9a6bef Merge branch 'Development' into enhanced_g29 
Latest upstream changes
 2015-03-05 02:49:18 -08:00
Scott Lahteine
4db2179f5c Include 4th extruder support 2015-03-05 02:37:36 -08:00
OhmEye
f90a947e65 Fix autoretract 
Autoretract was broken, looks like it was overlooked when the retracted flag was updated for multi extruders.
 2015-03-04 20:28:08 -10:00
Scott Lahteine
2ef6b3d57a Fix wrong defines, broken syntax 2015-03-04 22:24:44 -08:00
Scott Lahteine
08b722b635 Merge pull request #1555 from C-o-r-E/solenoids 
Add support for solenoid articulated extruders
 2015-03-04 21:36:29 -08:00
Scott Lahteine
32744d41a9 Do sanity checking on LRFB values 
- Setting boundaries based on configured limits, contrasting with G28
(which forgets these limits?)
 2015-03-04 21:32:11 -08:00
chrono
0a7d85c20e Minor fixes 2015-03-04 12:35:32 +00:00
chrono
48e3a97a18 Removed extra encoder definitions from pins_FELIX2.h 2015-03-04 12:21:18 +00:00
Scott Lahteine
d052a3c6aa Merge pull request #1551 from thinkyhead/redundant_encrot 
Cleanup rotary encoder encrot* defines
 2015-03-04 03:22:24 -08:00
chrono
d8eeddfb93 Updated DUAL Extruder config, added README and enabled NEWPANEL by default 2015-03-04 09:59:58 +00:00
chrono
b423b90c77 Added Configuration_adv.h to examples for LCD/SD Support 2015-03-03 19:09:25 +01:00
domonoky
075507fb9a missed one X_ENABLE_PIN 2015-03-03 11:09:56 +01:00
Scott Lahteine
dfb38874f8 Some suggested changes for #1555 2015-03-03 00:48:20 -08:00
Scott Lahteine
7f8ea7105f Arrange ProbeAction values bitwise 2015-03-02 20:14:37 -08:00
Scott Lahteine
7684721977 Enhanced G29 
- Adapted “Enhanced G29” code referred to in #1499 and posted at
[3dprintboard.com](http://3dprintboard.com/showthread.php?3105-Auto_Bed_
Leveling-Enhanced-G29-command)
- Compatible with current G29 while adding some new arguments
  - `V` sets the verbose level for serial out
  - `T` (or `V` > 2) send a Topology report to serial out
  - `E` works the same way as before
  - `P` works as before (source used `n` or `U`/`u`)
  - `L`, `R`, `B`, `F` work as before
- Still needs sanity checking for `LRBF`
 2015-03-02 20:00:17 -08:00
C-o-r-E
874d3d3fc5 Add support for solenoid articulated extruders 2015-03-02 20:07:12 -05:00
chrono
7540a81106 Minor fixes 2015-03-02 22:55:00 +01:00
chrono
a375d648c7 Merge remote-tracking branch 'upstream/Development' into Development 2015-03-02 17:21:05 +00:00
domonoky
4a7aca2736 Merge remote-tracking branch 'remotes/upstream/Development' into Development 2015-03-02 17:52:12 +01:00
alexborro
715104e477 Fix Endstop check for CoreXY bots. 
The X_Axis could not home to min while Y_Max endstop was trigged.
 2015-03-02 13:36:58 -03:00
Scott Lahteine
e428e8da75 Merge pull request #1552 from thinkyhead/cleanup_cardreader 
Cleanup of cardreader.*
 2015-03-02 07:57:26 -08:00
Scott Lahteine
20e59dc61e Don't skip files starting with underscores 2015-03-02 07:56:11 -08:00
Scott Lahteine
f171656f8e Cleanup of cardreader.* 
- Apply standards to cardreader.*
- Fix minor issues with cardreader.cpp
- Apply standards to some other stale regions
 2015-03-02 07:06:01 -08:00
Scott Lahteine
f379edca78 Cleanup rotary encoder encrot* defines 
The encrot values are used in only one place, and don’t vary, so remove
redundant references.
 2015-03-02 06:42:48 -08:00
Scott Lahteine
c7cdb176c8 Merge branch 'Development' into marlin_configurator 
Latest upstream changes
 2015-03-02 06:13:10 -08:00
Scott Lahteine
49f471a5fc Merge pull request #1541 from thinkyhead/fixup_temperature 
Cleanup of temperature code
 2015-03-02 05:38:10 -08:00
Scott Lahteine
f2710e11d1 Optimize initial loading, code cleanup 2015-03-02 05:23:36 -08:00
chrono
558c6313f7 Merge branch 'pr-felix' into Marlix 2015-03-02 10:27:58 +00:00