Commit Graph

149 Commits

Author SHA1 Message Date
Scott Lahteine
af3a68f81f Add HAS_HOTEND_OFFSET_Z conditional 2018-05-19 17:09:24 -05:00
Scott Lahteine
151201656f Add FAN_MAX_PWM for M106-controlled fans 2018-05-15 21:17:34 -05:00
Scott Lahteine
e5f4f1554b
[1.1.x] Enable AD595 and AD8495 in concert (#10694)
* Allow both AD595 and AD8495 in concert
* General temperature code tweaks
2018-05-11 01:02:00 -05:00
Scott Lahteine
78410b210b
Add UBL support for G2/G3 and G5 (#10649) 2018-05-08 11:10:33 -05:00
Scott Lahteine
b50afa9897 Add thermocouple with AD8495 support
Co-Authored-By: Dmitriy <demonx@demonx.ru>
2018-05-02 08:41:31 -05:00
Scott Lahteine
a556a8c506 Temp-related and conditional improvements 2018-05-02 08:41:30 -05:00
Scott Lahteine
95d19cfcbf Fix disable of Z_SENSORLESS for HOMING_Z_WITH_PROBE
As pointed out in #10532
2018-04-27 01:40:25 -05:00
Scott Lahteine
e931bc7e72 Reorder some conditionals 2018-04-26 17:55:36 -05:00
Scott Lahteine
cb02b6ec60 Disable PIDTEMPBED with no bed…
…and move FILAMENT_CHANGE_SLOW_LOAD_LENGTH default to post-conditionals.
2018-04-26 01:34:06 -05:00
Scott Lahteine
b19d8182c1
Add HAS_HEATED_BED conditional (#10494) 2018-04-22 23:40:49 -05:00
Scott Lahteine
d7ec13ce69 Creality3D Power-Loss Recovery 2018-04-21 21:30:25 -05:00
Scott Lahteine
6786101c64 Ignore LCD_BED_LEVELING with UBL 2018-04-17 15:54:25 -05:00
Lenbok
0aa833fe6c Chamber temperature monitoring and auto fan control.
This is an initial cut for feedback.

Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?

Chamber temperatures are not reported on the LCD in any way.

When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.

As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
2018-04-06 23:09:44 -05:00
Scott Lahteine
be098cd42f Z Endstop Servo => Z Probe Servo 2018-04-01 23:54:47 -05:00
Scott Lahteine
68b9503b96 MIN_PROBE_EDGE replaces DELTA_PROBEABLE_RADIUS 2018-03-19 02:17:45 -05:00
Scott Lahteine
cf4e2e507f Consolidate 3-point leveling point options 2018-03-19 01:55:51 -05:00
Scott Lahteine
e63cb5fe8f
[1.1.x] Make MIN_PROBE_EDGE a general option (for electronic probes) (#10068)
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
2018-03-13 01:15:29 -05:00
Scott Lahteine
e7d519c898 Add suspend_auto_report flag to suppress auto-report 2018-03-07 01:58:37 -06:00
Scott Lahteine
2bf1bbf399 Add HAS_TEMP_SENSOR conditional 2018-03-07 01:58:31 -06:00
Scott Lahteine
1f488292cd
Add board MKS_BASE_HEROIC (#9924)
Followup to #9008

- Don't define micro-stepping pins for boards that lack them.
- Allow setting of 128 microsteps with `M350`.
2018-03-03 23:14:28 -06:00
Scott Lahteine
f7b44ac2a6
Fix SENSORLESS_HOMING for Core Kinematics (#9871) 2018-03-01 01:49:41 -06:00
Scott Lahteine
2e3d74f60f Drop a conditional only used once 2018-02-24 16:31:05 -06:00
Scott Lahteine
c04f8e8c9d Support for multiple filament runout sensors 2018-02-19 06:25:35 -06:00
Roxy-3D
3fcd131f46
Cartesian UBL systems should not use SEGMENT_LEVELED_MOVES
There is significant downside to breaking up the long line segments on UBL Cartesian machines via the SEGMENT_LEVELED_MOVES mechanism.   It adds a lot of extra computation but worse...  It cuts out all of UBL's off mesh Z-Height correction checks.    There have been a large number of people complaining about the nozzle going to infinity or crashing into the bed lately.   They are being caused by
```
void unified_bed_leveling::line_to_destination_cartesian()
```
not watching over the segments being queued up for movement.
2018-02-14 14:19:52 -06:00
Scott Lahteine
0e7999915d Fix #9361 2018-02-14 07:47:39 -06:00
Thomas Moore
a471cd26e1 [1.1.x] Enable Z axis and delta sensorless homing (#9532) 2018-02-08 02:02:48 -06:00
Thomas Moore
b818543045 [1.1.x] Fix change filament for delta machines (#9296) 2018-01-22 10:19:00 -06:00
Scott Lahteine
1cea0b6f70 Fix Skew Correction pre-calculation overflow error 2018-01-22 08:22:28 -06:00
Roxy-3D
80c1afde0f
Fix mesh size... 2018-01-17 09:33:18 -06:00
Roxy-3D
c11665e92f
Regression fixes for UBL's G29 P1, G29 P2, G29 P4 and G26 (#9213)
The changes to ultralcd.cpp for is_lcd_clicked() did not encompass the
full functionality of UBL's G29 P1, P2 and P4.   It also broke G26's
ability to abort in several of its phases.

This is the first pass at fixing the problem.   It has been tested for
correctness for several hours but more testing  needs to be done.
There may be a few follow up patches to finish covering all the corner
cases, but right now I need to merge this before any conflicts show up.

Some of these changes will need to be moved over to the bugfix-v2.0.0
branch.   That will happen a few days from now.
2018-01-17 00:27:50 -06:00
Scott Lahteine
3df0d62725 Updates to TMC support 2018-01-10 04:32:49 -06:00
Scott Lahteine
172ea8c71c General code/bitmaps cleanup 2017-12-13 17:57:54 -06:00
Scott Lahteine
6e8da93c42 UBL_DELTA => UBL_SEGMENTED 2017-12-11 00:20:29 -06:00
Jonathan Barchi
7c6d33b0d2 Fix - Conditionals_post.h - allow overriding of [min,max] probe points as expected 2017-12-07 10:40:32 -08:00
Scott Lahteine
db8631e49a Use custom segment length for UBL Cartesian 2017-12-03 00:02:28 -06:00
Scott Lahteine
172ce67344 New feature: BED_SKEW_CORRECTION 2017-12-01 19:43:32 -06:00
Scott Lahteine
1f770bb103 Config updates, spacing mainly 2017-11-29 20:57:38 -06:00
Scott Lahteine
d786fb99e2 Add an option to segment leveled moves 2017-11-29 16:58:15 -06:00
Scott Lahteine
d7cc26cc17 Allow override of probe bounds in configs 2017-11-26 20:57:00 -06:00
Scott Lahteine
a63d9cc550 Loosen HAS_BED_PROBE definition 2017-11-25 20:10:03 -06:00
Roxy-3D
50148f7185
Update the UBL Probable Area for Delta's
This is a non-intuitive change.   @oldmcg says in this post https://github.com/MarlinFirmware/Marlin/issues/7572#issuecomment-340641207 that using DELTA_PRINTABLE_RADIUS is better than DELTA_PROBABLE_RADIUS for setting the probe limits.   This is because the automatic probe code checks all locations for being reachable by the probe prior to doing the probe.
2017-11-17 16:41:31 -06:00
Thomas Moore
658e1ebe5a Add delta_height variable in lieu of using home_offset 2017-11-08 23:21:02 -06:00
Scott Lahteine
1d0739d6d1 Patch G33 misuse of PROBE_MANUALLY 2017-11-07 22:28:54 -06:00
Scott Lahteine
69a7d4e0a5 Conditionals updates from #7979 2017-11-07 21:20:38 -06:00
Scott Lahteine
8ab368559a Implement CNC_COORDINATE_SYSTEMS 2017-11-04 22:30:23 -05:00
Scott Lahteine
8b7c1e9cec Fix for MAX_VFAT_ENTRIES sanity check 2017-10-30 16:24:45 -05:00
Scott Lahteine
e792c2b234 Followup to #8123 - to match 2.0.x changes 2017-10-29 05:39:44 -05:00
Scott Lahteine
318c419f77 Implement support for Dual X and Y endstops 2017-10-29 03:49:45 -05:00
Scott Lahteine
f06f4b40b8 Apply physical limits to mesh bounds 2017-10-24 16:49:00 -05:00
Scott Lahteine
2338632270 Simplify Cartesian probing bounds
Followup to #8011
2017-10-18 17:16:14 -05:00