MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
10,113 Commits 1 Branch 0 Tags 96 MiB
dbd0979c36
Commit Graph

8421 Commits

Author SHA1 Message Date
Scott Lahteine
dbd0979c36 Remove obsolete HAL_timer_restrain 2018-08-31 17:49:26 -05:00
Scott Lahteine
ca87e4c0fd Sanity-check SERVO pin for servo probes 2018-08-30 18:33:37 -05:00
MaiTaiSui
f58168a6f5 Support for Anet A2 Plus (#11660) 2018-08-29 16:05:23 -05:00
Scott Lahteine
ba46edec2a Fix 5 mixing steppers, etc. 
Co-Authored-By: neorex <neorex99@gmail.com>
 2018-08-29 03:21:43 -05:00
srieche
99393550f2 [1.1.x] Silently drop M108, M112 and M410 with emergency parser enabled (#11666) 2018-08-28 20:48:31 -05:00
Scott Lahteine
4f0737cd2c Fix SD percent for Lite Status Screen 
Co-Authored-By: Lê Hoàng <icy.lord.love.angel@gmail.com>
 2018-08-26 17:13:58 -05:00
Scott Lahteine
cf1b2af71a Update Ultimaker servo pin 
As pointed out at https://github.com/MarlinFirmware/Marlin/issues/7981#issuecomment-407116642
 2018-08-21 11:38:45 -05:00
Scott Lahteine
903ccb4b60 Always disable/restore leveling on tool-change 
Counterpart to #11559 and its followup.

Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
 2018-08-21 09:13:36 -05:00
Scott Lahteine
3f75c5df7c Fix Homing/UBL 
Co-Authored-By: smoki3 <kevinbayer8@gmail.com>
 2018-08-21 07:49:13 -05:00
Scott Lahteine
e5de565987
Fix up Max7219 orientations (#11597) 2018-08-20 20:31:40 -05:00
Scott Lahteine
feb55517af
[1.1.x] Max7219 cleanup, simplify, and extend (#11574) 2018-08-18 01:48:28 -05:00
Scott Lahteine
2f2f16c340 Marlin assumes signed chars 2018-08-16 21:18:20 -05:00
Roxy-3D
3ef6cf0bfb
declare void Max7219_register_setup(); 2018-08-15 10:39:08 -05:00
Scott Lahteine
5f0798544e Update Czech language 
Co-Authored-By: petrzjunior <junior@zahradnik.cz>
 2018-08-14 18:47:24 -05:00
teemuatlut
b4efefea8b [1.1.x] Fix TMC2208 SW serial communication (#11548) 
* New TMC2208 constructor
* Update default driver configuration
 2018-08-14 18:44:17 -05:00
Roxy-3D
e518533a75
Change M7219 I to setup Max7219 registers, but not do initialization pattern 2018-08-13 17:48:17 -05:00
Roxy-3D
02381d6821
Make M7219 I more robust and nicer to look at 2018-08-13 17:05:13 -05:00
Roxy-3D
263beae3e9 Add I parameter to ignore pin protection on M42 2018-08-13 16:50:24 -05:00
Scott Lahteine
cc6a31528d Improve AXIS_DRIVER_TYPE macros 2018-08-13 16:50:24 -05:00
Aaron Griffith
5482af38f0 Remove oversampled data from thermistor table 71 (#11504) 
Data in Table 71 is extremely oversampled (see Issue #11220). I have removed the data points that perform *worse* than linearly interpolating the remaining points, and fixed up two points that were simply rounded incorrectly.
 2018-08-13 02:52:48 -05:00
Scott Lahteine
a9cb4834da Allow Einsy RAMBo FAN1_PIN override 2018-08-13 02:48:25 -05:00
Shen Yiming
7b0a8e85ba Fix pca9632_set_led_color lost i2c connection (#11530) 2018-08-12 18:05:00 -05:00
Scott Lahteine
77625654f4 Reduce max accel in Creality configs 2018-08-11 22:57:44 -05:00
Scott Lahteine
bdb2dd27ad Allow G33 to compile with no LCD 2018-08-11 22:45:04 -05:00
Scott Lahteine
f1467ddc0e UBL/planner patch tweaks 2018-08-11 22:45:04 -05:00
Thomas Moore
105d20c2e8 Account for UBL correction when setting the planner position (#11511) 2018-08-10 13:00:45 -05:00
Scott Lahteine
9e46e84a55
Treat TMC2660 like non-TMC (#11485) 2018-08-10 00:30:11 -05:00
Scott Lahteine
4f59ee8978 Minor spacing fixes 2018-08-07 14:00:48 -05:00
Scott Lahteine
e741241721 No raise when homing after power-loss 2018-08-07 13:50:33 -05:00
Scott Lahteine
332a80cadb Restore bugfix README, etc. 2018-08-07 13:45:03 -05:00
lsellens
614a944504 auto power control without heated bed (#11467) 
`AUTO_POWER_CONTROL` will not work if printer has no heated bed due to `degTargetBed()` not being defined
 2018-08-06 23:18:13 -05:00
Giuliano
33364c17b9 [1.1.x] Better timing handling (#11462) 2018-08-06 23:14:11 -05:00
Scott Lahteine
b8d4c4216f
Easier to disable homing validation (#11457) 2018-08-06 23:11:28 -05:00
Scott Lahteine
86d9af1108
Fix drivers.h dependency, defer macro evaluation (#11449) 2018-08-03 21:48:57 -05:00
silentninja1
4c4fffc503 [1.1.x] Fix Dual X Carriage tool change crash (#11425) 2018-08-03 20:47:19 -05:00
Marcio Teixeira
fae96a6a13 Fix jumping progress bar. (#11438) 
- When `LCD_SET_PROGRESS_MANUALLY` was disabled and an SD print was not active (i.e. the printer was idle), progress_bar_percent would read uninitialized memory from stack and cause progress bar to jump wildly.
- Also updated conditions in `#ifdef` to match `ultralcd.cpp`
 2018-08-03 17:16:14 -05:00
Roxy-3D
7d491aa015 Tiny improvement to M7219 
The registers within the Max7219 can get corrupted a number of ways.  This allows the Max7219 to be reset and fully initialized.
And...  it also allows the user to see the initialization pattern.
 2018-08-02 18:43:36 -05:00
Scott Lahteine
888d319145 Align some config options 2018-08-02 18:42:20 -05:00
MikeLud
a2ac7e1407 Add M915 to Prepare Menu (#11383) 2018-07-31 02:03:49 -05:00
Shen Yiming
8db91f0bd1 Clean up 12864 OLED code (#11388) 2018-07-30 23:02:12 -05:00
Scott Lahteine
c4f4c255b4
Fix initial safe_speed in jerk code (#11396) 2018-07-30 22:49:20 -05:00
Roxy-3D
33c37d587d
Revert "[1.1.x] idex and bl touch fix" (#11406) 
* Revert "[1.1.x] bltouch home refinements (#11398)"

This reverts commit 30839a6ba6.

* Revert "[1.1.x] idex and bl touch fix (#11392)"

This reverts commit e1bef0ea79.
 2018-07-28 23:14:41 -05:00
Giuliano
30839a6ba6 [1.1.x] bltouch home refinements (#11398) 
Just create a better functions call logic flow
 2018-07-28 19:29:26 -05:00
silentninja1
e1bef0ea79 [1.1.x] idex and bl touch fix (#11392) 
* [1.1.x] IDEX and BLTouch Fixes

Fix bltouch not deploying during fast home, fix dual x carriage setting opposing side park position as destination on tool change

* Update Marlin_main.cpp

* Update Marlin_main.cpp

* Change brackets to be more in conformance with Marlin coding standards
 2018-07-28 10:33:35 -05:00
Giuliano
7284488da3 [1.1.x] fix bltouch homing (#11380) 
Partially revert. Seems to solve the issue, but one report says G29 still fails.
 2018-07-27 18:29:26 -05:00
Scott Lahteine
cab2e0877e Update DELAY_10US 2018-07-26 20:21:50 -05:00
bleughb
b6f24992ee [1.1.x] Update fastio_1280.h pin mapping comments (#11374) 2018-07-26 05:19:05 -05:00
Scott Lahteine
c30f636d22
Improve drivers.h macros (#11372) 2018-07-26 05:10:11 -05:00
Giuliano
2f76ec5c6a [1.1.x]-different-bltouch-init (#11358) 2018-07-26 05:03:39 -05:00
Scott Lahteine
56fbe3361b
Ensure ADC conversion is complete before reading (#11370) 
Co-Authored-By: gloomyandy <andy-git@gloomy-place.com>
 2018-07-26 03:58:33 -05:00