MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
10,057 Commits 1 Branch 0 Tags 96 MiB
e5b928f574
Commit Graph

10057 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Giuliano
e5b928f574 [1.1.x] Typo fix (#11366) 
Typo fix
 2018-07-25 18:00:28 -05:00
Scott Lahteine
2b860ab8a2
Merge pull request #11361 from thinkyhead/bf1_define_drivers_th 
[1.1.x] Configure stepper drivers per axis
 2018-07-25 04:05:13 -05:00
Scott Lahteine
7bad507d70 Simplify stepper driver config 2018-07-25 03:02:12 -05:00
Scott Lahteine
6d6bdc6517 Add *_DRIVER_TYPE to example configs 2018-07-25 02:39:16 -05:00
silentninja1
57ce81f067 [1.1.x] Fix LCD axis move E index (#11328) 2018-07-25 02:21:05 -05:00
Scott Lahteine
ed0e72bf44 Fix spelling in configs 2018-07-24 21:02:22 -05:00
silentninja1
060e7a3565 Silentninja1 idex crash fix (#11329) 
* Move home all axis prototype to allow access from UBL.h

* Remove home all axis command as it exists in marlin.h now

* Reverse order of tool change and home

Race condition causes E0 carriage to move on E1 commands and crash into parked head if order is reversed. Needs more research into permanent fix, but this will prevent damage to machines in the meantime.
 2018-07-24 14:44:50 -05:00
Scott Lahteine
3bbb121e7d Tweak some Max7219 code 2018-07-19 18:51:35 -05:00
Scott Lahteine
d1590fec3e
Merge pull request #11308 from thinkyhead/bf1_manual_probe_start_z 
[1.1.x] Manual Z Start Height
 2018-07-19 18:26:51 -05:00
Roxy-3D
6c62b0e263
Change Max7219_idle_task() to use columns if Y-Axis has 16 LED's (#11317) 2018-07-19 16:59:38 -05:00
Scott Lahteine
221e8bbb05 Add MANUAL_PROBE_START_Z to example configs 2018-07-18 21:50:18 -05:00
Scott Lahteine
888774cbc3 Add MANUAL_PROBE_START_Z for manual probing 2018-07-18 21:50:18 -05:00
Scott Lahteine
db057eb453 Fix tool_change call in UBL G29 
Fix #11279, #11252
 2018-07-18 20:35:14 -05:00
Scott Lahteine
5ce312f158
Merge pull request #11305 from thinkyhead/bf1_power_loss_pin 
[1.1.x] Add support for power loss detect pin
 2018-07-18 20:13:47 -05:00
Scott Lahteine
389f2ac81f planner.synchronize at start of tool_change 
See https://github.com/MarlinFirmware/Marlin/issues/10949#issuecomment-398540498
 2018-07-18 20:09:39 -05:00
Scott Lahteine
7321f30ac0 Add POWER_LOSS_PIN support 2018-07-18 19:58:06 -05:00
Scott Lahteine
46b0e054b1 Add POWER_LOSS_PIN to example configs 2018-07-18 19:58:06 -05:00
Giuliano
9d0627d66c Make GCodeParser::debug static (#11294) 2018-07-17 23:38:39 -05:00
Scott Lahteine
76ec07301d
Merge pull request #11297 from thinkyhead/bf1_malyan_lcd_update 
[1.1.x] Better Malyan LCD Feedrate/Temp handling
 2018-07-17 21:07:04 -05:00
Scott Lahteine
6024ffedd9 Improve Malyan progress / feedrate 
Co-Authored-By: J.C. Nelson <xc0000005@users.noreply.github.com>
 2018-07-17 19:33:57 -05:00
Scott Lahteine
7e648f3721 Add card.longest_filename, more lcd_strlen updates 2018-07-17 19:33:57 -05:00
Scott Lahteine
036f25e159 More lcd_strlen updates 2018-07-17 18:17:19 -05:00
Scott Lahteine
17e1eec21e Make sure linear units are initialized 
Based on #11295

Co-Authored-By: Giuliano <gmagician@users.noreply.github.com>
 2018-07-17 17:20:57 -05:00
Roxy-3D
58775cc694
Don't display M421 values for UBL at startup 
It takes 20 seconds to display the mesh values at startup...   If we are going to display this information at startup, we should find a more terse way to do it.   Perhaps displaying an entire row of the mesh at a time makes sense?
 2018-07-17 17:17:09 -05:00
Scott Lahteine
fbc3fdb490 LCD strlen functions like 2.0.x 2018-07-17 15:25:58 -05:00
Scott Lahteine
756080fcca Followup to floats patch 2018-07-17 15:24:33 -05:00
Giuliano
e6801ff84a [1.1.x] Fix change filament (#11268) 
Prevent crash, on filament change, when printer is not homed
 2018-07-16 21:48:45 -05:00
Roxy-3D
bc961220b7
Change Max7219_idle_task() routines to use single line if X-Axis has 16 or more LED's 
Change Max7219_idle_task() routines to use single line if X-Axis has 16 or more LED's

This gets bugfix_1.1.x at parity with https://github.com/MarlinFirmware/Marlin/pull/11285 when it gets merged.
 2018-07-16 19:23:59 -05:00
kaimimue
256f76d35e Fix Vellemann K8400 Configuration (#11258) 
The maximum movement is 180mm for Velleman K8400.
An offset of `Y_MIN_POS` violates an assertion in `SanityCheck.h`.

Code tested on Vellemann K8400 with Dual Extruder.
 2018-07-13 23:15:00 -05:00
Giuliano
1067c43107 [1.1.x] fix kill printer (#11261) 
This will fix kill message on dual printer with 0 alignment offset
 2018-07-13 23:13:29 -05:00
Scott Lahteine
d60b2e5ba8
Merge pull request #11233 from nightgryphon/multiprobe-z-up 
[1.1.x] Shorter Z raise between multiple probes
 2018-07-12 22:44:25 -05:00
Scott Lahteine
cb0777dbeb
Merge pull request #11248 from thinkyhead/bf1_tmc_unify_param_i 
[1.1.x] Unify "I" parameter for M906,M912 etc.
 2018-07-12 22:31:26 -05:00
Scott Lahteine
8f110190eb Add Z_CLEARANCE_MULTI_PROBE to example configs 2018-07-12 22:27:06 -05:00
nightgryphon
54adf6f52d Shorter Z up move between multiple probing attempts 
For some probes like micro switches the full Z clearance raise between
probing attempts is not required while bigger Z clearance between probe
points is still needed to avoid clamps. The shorter Z raise within
multiprobing same point significantly increase probing speed and the whole
auto level process.
 2018-07-12 22:27:06 -05:00
Clifford Roche
3b5c81b84a [1.1.x] Validate that X/Y_PROBE_OFFSET_FROM_EXTRUDER are integers (#11255) 2018-07-12 21:22:59 -05:00
Scott Lahteine
d8331d97d6 Unify M91x parameter I meaning, simplify reports 2018-07-11 20:31:40 -05:00
Scott Lahteine
5cddfce0ee Endstops::report_state => event_handler 2018-07-11 19:47:25 -05:00
Aaron Griffith
5f587126b9 Loosen static assertion guarding overflow in SCAN_THERMISTOR_TABLE (#11240) 
Bisect search merged in #10882 actually works fine for thermistor
tables with up to 255 entries with no overflow, due to C++ integer
promotion rules.

Closes issue #11220.
 2018-07-11 16:42:23 -05:00
Roxy-3D
39b3e4c501
Support for multiple Max7219 units in a chain (#11226) 
* Support for multiple Max7219 units in a chain

I'll move this support over to bugfix_2.0.0 in the next few days.   And
then look at updating the Max7219_idle() routine to make use of multiple
units in a chain.

* spelling correction
 2018-07-08 17:35:58 -05:00
Roxy-3D
fae2929b6b
Resolve issue where user can't edit mesh 2018-07-08 14:39:08 -05:00
Scott Lahteine
ccb225f43a
Float maths updates for 2.0.x parity (#11213) 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-07-06 21:44:33 -05:00
Scott Lahteine
fc9f4ce2c0 Fix missing quote in language list 
Co-Authored-By: p3p <p3p@p3psoft.co.uk>
 2018-07-04 13:40:18 -05:00
Scott Lahteine
a69cc6c5ba Fix Trigorilla include typo 2018-07-03 20:22:36 -05:00
Scott Lahteine
03a704600c
No M914 or SGT set for non-sensorless axes (#11197) 2018-07-03 20:10:43 -05:00
Scott Lahteine
e84341412c
Merge pull request #11194 from Schullebernd/bugfix-1.1.x 
[1.1.x] Tronxy X3A configurations and thermistor
 2018-07-03 19:05:51 -05:00
Scott Lahteine
fae20983eb Add configurations for Tronxy X3A 2018-07-03 18:14:46 -05:00
Scott Lahteine
559e935785 Bring default Configuration.h up to date 2018-07-03 18:10:55 -05:00
Marcel Schulz
432da42dba Add thermistor 501 (100K Zonestar) 2018-07-03 18:10:55 -05:00
Scott Lahteine
0702c78e62
Fix and improve POWER_LOSS_RECOVERY (#11186) 2018-07-02 23:21:18 -05:00
Scott Lahteine
84187dca5c Add "Marlin Dev Mode" option 2018-07-02 22:53:01 -05:00