Firmware/Marlin
Scott Lahteine 0aa100a31e Add Z_AFTER_PROBING option
Some fix-mounted probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
2018-03-11 09:48:02 -05:00
..
example_configurations Add UNKNOWN_Z_NO_RAISE to example configs 2018-03-09 23:11:35 -06:00
bitmap_flags.h Parity with 2.0.x bitmap functions 2017-11-25 19:56:22 -06:00
blinkm.cpp Cleanups/changes to led control menu 2017-11-30 00:04:43 -06:00
blinkm.h Cleanups/changes to led control menu 2017-11-30 00:04:43 -06:00
boards.h Add Einsy RAMBo board (#10018) 2018-03-09 01:40:34 -06:00
buzzer.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
cardreader.cpp Rebuild SD file sort array on Stop SD Print (#9975) 2018-03-07 01:42:30 -06:00
cardreader.h Rebuild SD file sort array on Stop SD Print (#9975) 2018-03-07 01:42:30 -06:00
circularqueue.h
Conditionals_LCD.h [1.1.x] LIN_ADVANCE v1.5 (#9700) 2018-02-23 00:53:41 -06:00
Conditionals_post.h Add suspend_auto_report flag to suppress auto-report 2018-03-07 01:58:37 -06:00
Conditionals.h
Configuration_adv.h Set a safe default MINIMUM_STEPPER_PULSE of 2 2018-03-09 03:59:18 -06:00
configuration_store.cpp Move [xyz]_endstop_adj to Endstops class 2018-03-10 06:54:18 -06:00
configuration_store.h Tweaks to E2END, mesh slot offset 2018-03-10 06:54:18 -06:00
Configuration.h Add Z_AFTER_PROBING option 2018-03-11 09:48:02 -05:00
dac_mcp4728.cpp Apply standards for whole-file conditions 2018-02-04 21:17:03 -06:00
dac_mcp4728.h
digipot_mcp4018.cpp
digipot_mcp4451.cpp
dogm_bitmaps.h Fix compile error with SHOW_BOOTSCREEN disabled 2018-02-17 15:39:46 -06:00
dogm_font_data_6x9_marlin.h
dogm_font_data_HD44780_C.h
dogm_font_data_HD44780_J.h
dogm_font_data_HD44780_W.h
dogm_font_data_ISO10646_1_PL.h
dogm_font_data_ISO10646_1_tr.h
dogm_font_data_ISO10646_1.h Fix non-extended font option 2017-11-06 21:43:18 -06:00
dogm_font_data_ISO10646_5_Cyrillic.h
dogm_font_data_ISO10646_CN.h
dogm_font_data_ISO10646_CZ.h
dogm_font_data_ISO10646_Greek.h
dogm_font_data_ISO10646_Kana.h
dogm_font_data_ISO10646_SK.h
dogm_font_data_Marlin_symbols.h
duration_t.h Use static classes for job timers (#9940) 2018-03-04 22:52:25 -06:00
endstop_interrupts.h General code/bitmaps cleanup 2017-12-13 17:57:54 -06:00
endstops.cpp Move [xyz]_endstop_adj to Endstops class 2018-03-10 06:54:18 -06:00
endstops.h Move [xyz]_endstop_adj to Endstops class 2018-03-10 06:54:18 -06:00
enum.h Make enums into implicit char 2018-03-06 23:36:56 -06:00
fastio_168.h
fastio_644.h [1.1.x] Add 1284 support & misc. bug fixes (#9869) 2018-03-01 03:05:27 -06:00
fastio_1280.h
fastio_1281.h
fastio_AT90USB.h
fastio.h Make enums into implicit char 2018-03-06 23:36:56 -06:00
fwretract.cpp Correct some retract() comments 2018-02-08 17:56:53 -06:00
fwretract.h Make FWRetract class for 2.0.x parity 2018-01-04 17:54:24 -06:00
G26_Mesh_Validation_Tool.cpp Add SERIAL_FLUSH and SERIAL_FLUSHTX macros 2018-02-16 17:50:58 -06:00
gcode.cpp Simplify G-code debug option 2018-01-23 23:50:42 -06:00
gcode.h Parser followup patch 2018-02-01 23:25:22 -06:00
hex_print_routines.cpp Patch hex_print_routines.* include order 2018-02-05 17:05:26 -06:00
hex_print_routines.h Patch hex_print_routines.* include order 2018-02-05 17:05:26 -06:00
I2CPositionEncoder.cpp Remove some trailing whitespace 2018-03-04 21:13:36 -06:00
I2CPositionEncoder.h I2C position encoders update 2018-02-08 02:46:12 -06:00
language_an.h Apply feedrate to nozzle movement for kinematic machines 2018-02-03 22:17:13 -06:00
language_bg.h Size lcd_status_message based on language (#9546) 2018-02-08 23:03:27 -06:00
language_ca.h Size lcd_status_message based on language (#9546) 2018-02-08 23:03:27 -06:00
language_cn.h Size lcd_status_message based on language (#9546) 2018-02-08 23:03:27 -06:00
language_cz_utf8.h Update Czech advanced pause 2018-02-16 22:22:12 -06:00
language_cz.h Update Czech advanced pause 2018-02-16 22:22:12 -06:00
language_da.h Size lcd_status_message based on language (#9546) 2018-02-08 23:03:27 -06:00
language_de.h Add files via upload (#9827) 2018-02-26 15:44:24 -06:00
language_el-gr.h Size lcd_status_message based on language (#9546) 2018-02-08 23:03:27 -06:00
language_el.h Size lcd_status_message based on language (#9546) 2018-02-08 23:03:27 -06:00
language_en.h Add MSG_THERMAL_RUNAWAY_BED (#9695) 2018-02-18 02:24:08 -06:00
language_es_utf8.h Fix some mapper, charsize problems (#9865) 2018-02-28 18:56:45 -06:00
language_es.h Size lcd_status_message based on language (#9546) 2018-02-08 23:03:27 -06:00
language_eu.h update eu language 2018-02-07 01:12:37 +01:00
language_fi.h Size lcd_status_message based on language (#9546) 2018-02-08 23:03:27 -06:00
language_fr_utf8.h [1.1.x] French update (#9610) 2018-02-14 04:17:54 -06:00
language_fr.h [1.1.x] French update (#9610) 2018-02-14 04:17:54 -06:00
language_gl.h Apply feedrate to nozzle movement for kinematic machines 2018-02-03 22:17:13 -06:00
language_hr.h Size lcd_status_message based on language (#9546) 2018-02-08 23:03:27 -06:00
language_it.h Fix italian translation 2018-02-06 15:09:06 +01:00
language_kana_utf8.h Size lcd_status_message based on language (#9546) 2018-02-08 23:03:27 -06:00
language_kana.h Size lcd_status_message based on language (#9546) 2018-02-08 23:03:27 -06:00
language_nl.h Apply feedrate to nozzle movement for kinematic machines 2018-02-03 22:17:13 -06:00
language_pl-DOGM.h Size lcd_status_message based on language (#9546) 2018-02-08 23:03:27 -06:00
language_pl-HD44780.h Apply feedrate to nozzle movement for kinematic machines 2018-02-03 22:17:13 -06:00
language_pl.h
language_pt_utf8.h Fix some mapper, charsize problems (#9865) 2018-02-28 18:56:45 -06:00
language_pt-br_utf8.h Fix some mapper, charsize problems (#9865) 2018-02-28 18:56:45 -06:00
language_pt-br.h Apply feedrate to nozzle movement for kinematic machines 2018-02-03 22:17:13 -06:00
language_pt.h Apply feedrate to nozzle movement for kinematic machines 2018-02-03 22:17:13 -06:00
language_ru.h [bugfix-1.1.x] Update russian language 28 Feb 2017 (#9849) 2018-02-28 03:06:33 -06:00
language_sk_utf8.h [1.1.x] Added missing slovak translation of MSG_THERMAL_RUNAWAY_BED. (#9764) 2018-02-23 00:48:16 -06:00
language_test.h
language_tr.h Size lcd_status_message based on language (#9546) 2018-02-08 23:03:27 -06:00
language_uk.h Size lcd_status_message based on language (#9546) 2018-02-08 23:03:27 -06:00
language_zh_CN.h Size lcd_status_message based on language (#9546) 2018-02-08 23:03:27 -06:00
language_zh_TW.h Size lcd_status_message based on language (#9546) 2018-02-08 23:03:27 -06:00
language.h Spanish (UTF8) Language (#9785) 2018-02-23 20:23:35 -06:00
least_squares_fit.cpp
least_squares_fit.h
leds.cpp Cleanups/changes to led control menu 2017-11-30 00:04:43 -06:00
leds.h Use NEOPIXEL as case light 2018-01-20 16:57:04 -06:00
M100_Free_Mem_Chk.cpp M100 comment 2018-02-05 21:53:21 -06:00
macros.h Apply feedrate to nozzle movement for kinematic machines 2018-02-03 22:17:13 -06:00
Makefile Creality Ender support. 2018-01-15 03:39:43 -06:00
malyanlcd.cpp Rebuild SD file sort array on Stop SD Print (#9975) 2018-03-07 01:42:30 -06:00
Marlin_main.cpp Add Z_AFTER_PROBING option 2018-03-11 09:48:02 -05:00
Marlin.h Add Z_AFTER_PROBING option 2018-03-11 09:48:02 -05:00
Marlin.ino Marlin.ino needs no content 2018-02-06 01:09:51 -06:00
MarlinConfig.h Combine __AVR__ and USBCON for 2.0.x parity 2018-03-10 01:51:35 -06:00
MarlinSerial.cpp Combine __AVR__ and USBCON for 2.0.x parity 2018-03-10 01:51:35 -06:00
MarlinSerial.h Combine __AVR__ and USBCON for 2.0.x parity 2018-03-10 01:51:35 -06:00
MarlinSPI.h Add / use 32-bit wide bit macros 2018-02-01 21:47:23 -06:00
Max7219_Debug_LEDs.cpp Patch Max7219 for parity with 2.0.x 2018-02-11 05:19:36 -06:00
Max7219_Debug_LEDs.h
mesh_bed_leveling.cpp Make mbl.has_mesh() a method 2018-01-07 18:14:37 -06:00
mesh_bed_leveling.h Make enums into implicit char 2018-03-06 23:36:56 -06:00
neopixel.cpp Make safe_delay available for neopixel startup test 2018-02-16 22:25:57 -06:00
neopixel.h Cleanups/changes to led control menu 2017-11-30 00:04:43 -06:00
nozzle.cpp [1.1.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8864) 2017-12-24 23:47:05 -06:00
nozzle.h Add M701 / M702 filament load / unload 2017-12-30 19:48:21 -06:00
pca9632.cpp Cleanups/changes to led control menu 2017-11-30 00:04:43 -06:00
pca9632.h Cleanups/changes to led control menu 2017-11-30 00:04:43 -06:00
pins_3DRAG.h
pins_5DPRINT.h Pins spacing, 2.0.x parity 2018-02-17 21:49:00 -06:00
pins_ANET_10.h Pins spacing, 2.0.x parity 2018-02-17 21:49:00 -06:00
pins_AZTEEG_X1.h
pins_AZTEEG_X3_PRO.h Pins spacing, 2.0.x parity 2018-02-17 21:49:00 -06:00
pins_AZTEEG_X3.h
pins_BAM_DICE_DUE.h
pins_BQ_ZUM_MEGA_3D.h
pins_BRAINWAVE_PRO.h removed execution mode from files 2018-01-24 00:17:34 -06:00
pins_BRAINWAVE.h removed execution mode from files 2018-01-24 00:17:34 -06:00
pins_CHEAPTRONIC.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_CHEAPTRONICv2.h Pins parity with 2.0.x 2018-02-26 01:20:57 -06:00
pins_CNCONTROLS_11.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_CNCONTROLS_12.h Pins parity with 2.0.x 2018-02-26 01:20:57 -06:00
pins_EINSY_RAMBO.h Add Einsy RAMBo board (#10018) 2018-03-09 01:40:34 -06:00
pins_ELEFU_3.h
pins_FELIX2.h
pins_GEN3_MONOLITHIC.h
pins_GEN3_PLUS.h
pins_GEN6_DELUXE.h
pins_GEN6.h
pins_GEN7_12.h
pins_GEN7_13.h
pins_GEN7_14.h
pins_GEN7_CUSTOM.h
pins_GT2560_REV_A_PLUS.h Fix GT2560 A+ servo pins 2017-12-25 02:20:13 -06:00
pins_GT2560_REV_A.h Fix GT2560 A+ servo pins 2017-12-25 02:20:13 -06:00
pins_K8200.h
pins_K8400.h
pins_LEAPFROG.h
pins_MAKEBOARD_MINI.h
pins_MEGACONTROLLER.h Pins spacing, 2.0.x parity 2018-02-17 21:49:00 -06:00
pins_MEGATRONICS_2.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_MEGATRONICS_3.h Use MB() for Megatronics 3.1 2017-12-08 23:39:47 -06:00
pins_MEGATRONICS.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_MELZI_CREALITY.h Melzi boards include melzi pins 2018-02-10 15:03:20 -06:00
pins_MELZI_MAKR3D.h Melzi boards include melzi pins 2018-02-10 15:03:20 -06:00
pins_MELZI_MALYAN.h Melzi boards include melzi pins 2018-02-10 15:03:20 -06:00
pins_MELZI_TRONXY.h Add Tronxy X5S 2018-02-10 15:03:20 -06:00
pins_MELZI.h Melzi boards include melzi pins 2018-02-10 15:03:20 -06:00
pins_MIGHTYBOARD_REVE.h Pins spacing, 2.0.x parity 2018-02-17 21:49:00 -06:00
pins_MINIRAMBO.h Board definition and PIN assignments for Mini RAMBo1.0a 2017-12-08 23:41:34 -06:00
pins_MINITRONICS.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_MKS_13.h
pins_MKS_BASE_HEROIC.h Add board MKS_BASE_HEROIC (#9924) 2018-03-03 23:14:28 -06:00
pins_MKS_BASE.h Add board MKS_BASE_HEROIC (#9924) 2018-03-03 23:14:28 -06:00
pins_MKS_GEN_L.h
pins_OMCA_A.h
pins_OMCA.h
pins_PRINTRBOARD_REVF.h Update PB Rev.F pins 2018-02-11 01:36:20 -06:00
pins_PRINTRBOARD.h removed execution mode from files 2018-01-24 00:17:34 -06:00
pins_RAMBO.h Pins spacing, 2.0.x parity 2018-02-17 21:49:00 -06:00
pins_RAMPS_13.h
pins_RAMPS_ENDER_4.h Add Creality Ender-4 configurations 2018-02-24 22:01:16 -06:00
pins_RAMPS_OLD.h
pins_RAMPS_PLUS.h Adding support for using the MKS_12864OLED with the SSD1306 controller 2017-12-16 17:44:34 -06:00
pins_RAMPS.h Fix Zonestar / ADC keypad with RAMPS. (#9841) 2018-02-28 00:07:42 -06:00
pins_RIGIDBOARD_V2.h
pins_RIGIDBOARD.h
pins_RUMBA.h Pins spacing, 2.0.x parity 2018-02-17 21:49:00 -06:00
pins_SAINSMART_2IN1.h
pins_SANGUINOLOLU_11.h Creality Ender support. 2018-01-15 03:39:43 -06:00
pins_SANGUINOLOLU_12.h
pins_SAV_MKI.h removed execution mode from files 2018-01-24 00:17:34 -06:00
pins_SCOOVO_X9H.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_SETHI.h
pins_SILVER_GATE.h Patch SILVER_GATE auto fan 2018-02-10 19:29:36 -06:00
pins_STB_11.h
pins_TEENSY2.h removed execution mode from files 2018-01-24 00:17:34 -06:00
pins_TEENSYLU.h Pins spacing, 2.0.x parity 2018-02-17 21:49:00 -06:00
pins_TRIGORILLA.h Pins spacing, 2.0.x parity 2018-02-17 21:49:00 -06:00
pins_ULTIMAIN_2.h
pins_ULTIMAKER_OLD.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_ULTIMAKER.h Drop unused LARGE_FLASH option 2017-11-13 15:47:03 -06:00
pins_ZRIB_V20.h
pins.h Auto-assign CS pins for X2, Y2, Z2 (#10056) 2018-03-11 09:25:02 -05:00
pinsDebug_list.h [1.1.x] Add 1284 support & misc. bug fixes (#9869) 2018-03-01 03:05:27 -06:00
pinsDebug_plus_70.h Support for SilverGate Board 2017-10-31 15:26:27 -05:00
pinsDebug_Teensyduino.h
pinsDebug.h Fix DIGITAL_PIN_TO_ANALOG_PIN macro for Atmega1284p (#9883) 2018-03-01 15:14:08 -06:00
planner_bezier.cpp Apply standards for whole-file conditions 2018-02-04 21:17:03 -06:00
planner_bezier.h
planner.cpp Update powersupply_on in power_on/off (#10014) 2018-03-08 18:56:41 -06:00
planner.h Make enums into implicit char 2018-03-06 23:36:56 -06:00
point_t.h Cleanup Nozzle class, fix XY vs Z move order 2017-11-05 18:14:18 -06:00
power.cpp Update powersupply_on in power_on/off (#10014) 2018-03-08 18:56:41 -06:00
power.h Patch Power class 2018-02-10 15:36:42 -06:00
printcounter.cpp Use static classes for job timers (#9940) 2018-03-04 22:52:25 -06:00
printcounter.h Use static classes for job timers (#9940) 2018-03-04 22:52:25 -06:00
runout.cpp Import FilamentRunoutSensor with debounce (#9947) 2018-03-05 01:49:19 -06:00
runout.h Import FilamentRunoutSensor with debounce (#9947) 2018-03-05 01:49:19 -06:00
SanityCheck.h Add Z_AFTER_PROBING option 2018-03-11 09:48:02 -05:00
Sd2Card.cpp Add pin_t to Marln 1.1 branch 2018-02-08 21:01:41 -06:00
Sd2Card.h Add pin_t to Marln 1.1 branch 2018-02-08 21:01:41 -06:00
SdBaseFile.cpp Use serial macros where possible 2018-02-16 17:53:47 -06:00
SdBaseFile.h Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdFatConfig.h Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdFatStructs.h Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdFatUtil.cpp Use serial macros where possible 2018-02-16 17:53:47 -06:00
SdFatUtil.h Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdFile.cpp Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdFile.h Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdInfo.h Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdVolume.cpp Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
SdVolume.h Cleanup, apply standards to SD lib, cardreader 2017-11-15 01:09:06 -06:00
serial.cpp Use serial macros where possible 2018-02-16 17:53:47 -06:00
serial.h Combine __AVR__ and USBCON for 2.0.x parity 2018-03-10 01:51:35 -06:00
servo.cpp Allow servo.cpp to use safe_delay 2018-03-09 03:07:55 -06:00
servo.h Update servo.* for parity with 2.0.x 2018-03-08 19:32:32 -06:00
softspi.h
speed_lookuptable.h Minimal include for speed_lookuptable 2017-12-05 21:44:59 -06:00
status_screen_DOGM.h Lightweight status screen for ST7920 2018-02-22 00:46:25 -06:00
status_screen_lite_ST7920_class.h Improvements to Lightweight ST7920 status screen. (#9960) 2018-03-06 01:49:45 -06:00
status_screen_lite_ST7920_spi.h Lightweight status screen for ST7920 2018-02-22 00:46:25 -06:00
status_screen_lite_ST7920.h Improvements to Lightweight ST7920 status screen. (#9960) 2018-03-06 01:49:45 -06:00
stepper_dac.cpp Move some strings to PROGMEM 2018-01-23 23:50:42 -06:00
stepper_dac.h Apply const to axis args 2017-12-11 00:20:29 -06:00
stepper_indirection.cpp Fix HardwareSerial include for TMC2208 2018-02-23 12:33:14 -06:00
stepper_indirection.h Disambiguate 'else' in stepper code 2018-03-10 21:47:08 -06:00
stepper.cpp Disambiguate 'else' in stepper code 2018-03-10 21:47:08 -06:00
stepper.h Fix LA_active_extruder (static) 2018-03-07 05:50:35 -06:00
stopwatch.cpp Use static classes for job timers (#9940) 2018-03-04 22:52:25 -06:00
stopwatch.h Make enums into implicit char 2018-03-06 23:36:56 -06:00
temperature.cpp Add HAS_TEMP_SENSOR conditional 2018-03-07 01:58:31 -06:00
temperature.h Add HAS_TEMP_SENSOR conditional 2018-03-07 01:58:31 -06:00
thermistornames.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_1.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_2.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_3.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_4.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_5.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_6.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_7.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_8.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_9.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_10.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_11.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_12.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_13.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_15.h Add thermistor 15 tuned for JGAurora A5 2018-01-21 16:57:47 -06:00
thermistortable_20.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
thermistortable_51.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_52.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_55.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_60.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_66.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_70.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_71.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_75.h Update of comments in thermistor table files. No functional changes. 2017-12-31 14:46:56 +01:00
thermistortable_110.h
thermistortable_147.h
thermistortable_998.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
thermistortable_999.h Add OV() macro for thermistor tables 2017-11-15 03:20:36 -06:00
thermistortable_1010.h
thermistortable_1047.h
thermistortables.h Add thermistor 15 tuned for JGAurora A5 2018-01-21 16:57:47 -06:00
tmc_util.cpp Fix _tmc_say_axis string address 2018-03-09 06:07:52 -06:00
tmc_util.h Make enums into implicit char 2018-03-06 23:36:56 -06:00
twibus.cpp Apply standards for whole-file conditions 2018-02-04 21:17:03 -06:00
twibus.h
types.h Fix types.h dependency 2018-02-25 22:01:01 -06:00
ubl_G29.cpp Add Z_AFTER_PROBING option 2018-03-11 09:48:02 -05:00
ubl_motion.cpp Followup to #9663 2018-02-15 22:23:27 -06:00
ubl.cpp Suspend auto-report during UBL map output 2018-03-07 01:58:37 -06:00
ubl.h Fix LA_active_extruder (static) 2018-03-07 05:50:35 -06:00
ultralcd_impl_DOGM.h Fix custom bootscreen compiler warning 2018-03-04 23:37:32 -06:00
ultralcd_impl_HD44780.h remove conditional download of custom character RAM 2018-03-07 17:50:18 -06:00
ultralcd_st7565_u8glib_VIKI.h Fix VIKI2 hardware SPI compatibility (#9642) 2018-02-16 02:28:42 -06:00
ultralcd_st7920_u8glib_rrd.h Lightweight status screen for ST7920 2018-02-22 00:46:25 -06:00
ultralcd.cpp Finish scroll_screen, fixing direction/multiplier 2018-03-11 04:44:28 -05:00
ultralcd.h Fix BTN_BACK 2018-02-28 03:27:36 -06:00
utf_mapper.h
utility.cpp Patch utility for debug-leveling 2018-02-07 22:43:51 -06:00
utility.h Fix: utility.h requires types.h 2018-03-09 03:33:25 -06:00
vector_3.cpp Apply standards for whole-file conditions 2018-02-04 21:17:03 -06:00
vector_3.h Add a struct defining EEPROM storage 2018-01-05 15:47:51 -06:00
Version.h Date refresh 2018-01-20 09:17:00 -06:00
watchdog.cpp Fix watchdog in WATCHDOG_RESET_MANUAL mode AVR 2017-11-03 04:45:13 +01:00
watchdog.h