| .. |
|
example_configurations
|
Support for Anet A2 Plus (#11660)
|
2018-08-29 16:05:23 -05:00 |
|
bitmap_flags.h
|
Parity with 2.0.x bitmap functions
|
2017-11-25 19:56:22 -06:00 |
|
blinkm.cpp
|
Cleanups/changes to led control menu
|
2017-11-30 00:04:43 -06:00 |
|
blinkm.h
|
Cleanups/changes to led control menu
|
2017-11-30 00:04:43 -06:00 |
|
boards.h
|
Prevent MB false-positive on bad board name
|
2018-06-08 19:57:31 -05:00 |
|
buzzer.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
|
cardreader.cpp
|
Add card.longest_filename, more lcd_strlen updates
|
2018-07-17 19:33:57 -05:00 |
|
cardreader.h
|
Add card.longest_filename, more lcd_strlen updates
|
2018-07-17 19:33:57 -05:00 |
|
circularqueue.h
|
|
|
|
Conditionals_LCD.h
|
Shorter Z up move between multiple probing attempts
|
2018-07-12 22:27:06 -05:00 |
|
Conditionals_post.h
|
[1.1.x] Fix TMC2208 SW serial communication (#11548)
|
2018-08-14 18:44:17 -05:00 |
|
Conditionals.h
|
|
|
|
Configuration_adv.h
|
[1.1.x] Fix Dual X Carriage tool change crash (#11425)
|
2018-08-03 20:47:19 -05:00 |
|
configuration_store.cpp
|
Minor spacing fixes
|
2018-08-07 14:00:48 -05:00 |
|
configuration_store.h
|
Unsigned eeprom mesh addresses
|
2018-06-15 15:54:42 -05:00 |
|
Configuration.h
|
[1.1.x] Fix TMC2208 SW serial communication (#11548)
|
2018-08-14 18:44:17 -05:00 |
|
dac_mcp4728.cpp
|
Apply standards for whole-file conditions
|
2018-02-04 21:17:03 -06:00 |
|
dac_mcp4728.h
|
Fix get/setDrvPct declarations
|
2017-06-09 20:21:28 -07:00 |
|
delay.h
|
Better handling of DELAY_NS and DELAY_US (#10717)
|
2018-05-12 04:22:55 -05:00 |
|
digipot_mcp4018.cpp
|
Float maths updates for 2.0.x parity (#11213)
|
2018-07-06 21:44:33 -05:00 |
|
digipot_mcp4451.cpp
|
Float maths updates for 2.0.x parity (#11213)
|
2018-07-06 21:44:33 -05:00 |
|
dogm_bitmaps.h
|
Make sure FAN_ANIM_FRAMES is defined
|
2018-05-25 05:25:42 -05:00 |
|
dogm_font_data_6x9_marlin.h
|
|
|
|
dogm_font_data_HD44780_C.h
|
|
|
|
dogm_font_data_HD44780_J.h
|
|
|
|
dogm_font_data_HD44780_W.h
|
|
|
|
dogm_font_data_ISO10646_1_PL.h
|
Polish font
|
2017-04-21 21:42:41 -05:00 |
|
dogm_font_data_ISO10646_1_tr.h
|
Improve M600 with timeout, wait for heatup.
|
2017-02-15 05:29:34 -06:00 |
|
dogm_font_data_ISO10646_1.h
|
Fix non-extended font option
|
2017-11-06 21:43:18 -06:00 |
|
dogm_font_data_ISO10646_5_Cyrillic.h
|
|
|
|
dogm_font_data_ISO10646_CN.h
|
|
|
|
dogm_font_data_ISO10646_CZ.h
|
UTF-8 mapper for Czech
|
2017-07-04 15:51:23 -05:00 |
|
dogm_font_data_ISO10646_Greek.h
|
|
|
|
dogm_font_data_ISO10646_Kana.h
|
|
|
|
dogm_font_data_ISO10646_SK.h
|
Added Slovak C2C3C4 mapper implementation.
|
2017-10-06 14:40:15 -05:00 |
|
dogm_font_data_Marlin_symbols.h
|
|
|
|
drivers.h
|
Improve AXIS_DRIVER_TYPE macros
|
2018-08-13 16:50:24 -05:00 |
|
duration_t.h
|
Use static classes for job timers (#9940)
|
2018-03-04 22:52:25 -06:00 |
|
emergency_parser.cpp
|
Update emergency_parser for 2.0.x parity (#10530)
|
2018-04-25 22:42:43 -05:00 |
|
emergency_parser.h
|
Update emergency_parser for 2.0.x parity (#10530)
|
2018-04-25 22:42:43 -05:00 |
|
endstop_interrupts.h
|
Filter endstops state at all times (#11076)
|
2018-06-21 20:13:16 -05:00 |
|
endstops.cpp
|
Easier to disable homing validation (#11457)
|
2018-08-06 23:11:28 -05:00 |
|
endstops.h
|
Easier to disable homing validation (#11457)
|
2018-08-06 23:11:28 -05:00 |
|
enum.h
|
Patches for core motion tests
|
2018-05-24 00:50:25 -05:00 |
|
fastio_168.h
|
remove MARLIN line , change to logical pin (#10163)
|
2018-03-20 16:24:17 -05:00 |
|
fastio_644.h
|
remove MARLIN line , change to logical pin (#10163)
|
2018-03-20 16:24:17 -05:00 |
|
fastio_1280.h
|
[1.1.x] Update fastio_1280.h pin mapping comments (#11374)
|
2018-07-26 05:19:05 -05:00 |
|
fastio_1281.h
|
remove MARLIN line , change to logical pin (#10163)
|
2018-03-20 16:24:17 -05:00 |
|
fastio_AT90USB.h
|
remove MARLIN line , change to logical pin (#10163)
|
2018-03-20 16:24:17 -05:00 |
|
fastio.h
|
Add HAL.h for AVR for easier 2.0.x parity
|
2018-05-20 21:24:57 -05:00 |
|
fwretract.cpp
|
Fix the Z un-hop on G11
|
2018-05-29 23:40:16 -05:00 |
|
fwretract.h
|
[1.1] FWRetract Reset (Best way) (#10084)
|
2018-03-14 01:34:15 -05:00 |
|
G26_Mesh_Validation_Tool.cpp
|
[1.1.x] Buffer overflow and scroll fix, UTF8 cleanup (#10851)
|
2018-05-25 23:31:19 -05:00 |
|
HAL.h
|
Remove obsolete HAL_timer_restrain
|
2018-08-31 17:49:26 -05:00 |
|
hex_print_routines.cpp
|
Update includes for gcode.h => parser.h
|
2018-03-14 01:01:45 -05:00 |
|
hex_print_routines.h
|
Patch hex_print_routines.* include order
|
2018-02-05 17:05:26 -06:00 |
|
I2CPositionEncoder.cpp
|
Float maths updates for 2.0.x parity (#11213)
|
2018-07-06 21:44:33 -05:00 |
|
I2CPositionEncoder.h
|
Float maths updates for 2.0.x parity (#11213)
|
2018-07-06 21:44:33 -05:00 |
|
language_an.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_bg.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_ca.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_cn.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_cz_utf8.h
|
Update Czech language
|
2018-08-14 18:47:24 -05:00 |
|
language_cz.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_da.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_de.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_el-gr.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_el.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_en.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_es_utf8.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_es.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_eu.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_fi.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_fr_utf8.h
|
Fix some French strings
|
2018-09-05 04:34:09 -05:00 |
|
language_fr.h
|
Fix some French strings
|
2018-09-05 04:34:09 -05:00 |
|
language_gl.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_hr.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_it.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_kana_utf8.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_kana.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_nl.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_pl-DOGM.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_pl-HD44780.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_pl.h
|
Update links to old wiki page
|
2017-09-23 22:06:45 -05:00 |
|
language_pt_utf8.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_pt-br_utf8.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_pt-br.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_pt.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_ru.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_sk_utf8.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_test.h
|
Update links to old wiki page
|
2017-09-23 22:06:45 -05:00 |
|
language_tr.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_uk.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_zh_CN.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language_zh_TW.h
|
Add M915 to Prepare Menu (#11383)
|
2018-07-31 02:03:49 -05:00 |
|
language.h
|
Spanish (UTF8) Language (#9785)
|
2018-02-23 20:23:35 -06:00 |
|
least_squares_fit.cpp
|
Smarter MIN, MAX, ABS macros
|
2018-05-13 04:51:33 -05:00 |
|
least_squares_fit.h
|
Smarter MIN, MAX, ABS macros
|
2018-05-13 04:51:33 -05:00 |
|
leds.cpp
|
Cleanups/changes to led control menu
|
2017-11-30 00:04:43 -06:00 |
|
leds.h
|
Use NEOPIXEL as case light
|
2018-01-20 16:57:04 -06:00 |
|
M100_Free_Mem_Chk.cpp
|
Creality3D Power-Loss Recovery
|
2018-04-21 21:30:25 -05:00 |
|
macros.h
|
Simplify stepper driver config
|
2018-07-25 03:02:12 -05:00 |
|
Makefile
|
Marlin assumes signed chars
|
2018-08-16 21:18:20 -05:00 |
|
malyanlcd.cpp
|
Sync enqueue_and_echo_command with 2.0.x
|
2018-07-25 18:06:31 -05:00 |
|
Marlin_main.cpp
|
Fix 5 mixing steppers, etc.
|
2018-08-29 03:21:43 -05:00 |
|
Marlin.h
|
Fix 5 mixing steppers, etc.
|
2018-08-29 03:21:43 -05:00 |
|
Marlin.ino
|
[1.1.x] Arrange LCD options by type (#10631)
|
2018-05-06 19:17:29 -05:00 |
|
MarlinConfig.h
|
Fix drivers.h dependency, defer macro evaluation (#11449)
|
2018-08-03 21:48:57 -05:00 |
|
MarlinSerial.cpp
|
Fix MarlinSerial (#10992)
|
2018-06-10 20:04:52 -05:00 |
|
MarlinSerial.h
|
Add hidden Serial debug options
|
2018-06-09 22:23:10 -05:00 |
|
MarlinSPI.h
|
Add / use 32-bit wide bit macros
|
2018-02-01 21:47:23 -06:00 |
|
Max7219_Debug_LEDs.cpp
|
Fix up Max7219 orientations (#11597)
|
2018-08-20 20:31:40 -05:00 |
|
Max7219_Debug_LEDs.h
|
Fix up Max7219 orientations (#11597)
|
2018-08-20 20:31:40 -05:00 |
|
mesh_bed_leveling.cpp
|
Make mbl.has_mesh() a method
|
2018-01-07 18:14:37 -06:00 |
|
mesh_bed_leveling.h
|
Float maths updates for 2.0.x parity (#11213)
|
2018-07-06 21:44:33 -05:00 |
|
neopixel.cpp
|
Make safe_delay available for neopixel startup test
|
2018-02-16 22:25:57 -06:00 |
|
neopixel.h
|
Cleanups/changes to led control menu
|
2017-11-30 00:04:43 -06:00 |
|
nozzle.cpp
|
Smarter MIN, MAX, ABS macros
|
2018-05-13 04:51:33 -05:00 |
|
nozzle.h
|
Add M701 / M702 filament load / unload
|
2017-12-30 19:48:21 -06:00 |
|
parser.cpp
|
Fix M118 parameter handling
|
2018-04-12 19:06:41 -05:00 |
|
parser.h
|
Make GCodeParser::debug static (#11294)
|
2018-07-17 23:38:39 -05:00 |
|
pca9632.cpp
|
Fix pca9632_set_led_color lost i2c connection (#11530)
|
2018-08-12 18:05:00 -05:00 |
|
pca9632.h
|
Cleanups/changes to led control menu
|
2017-11-30 00:04:43 -06:00 |
|
pins_3DRAG.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_5DPRINT.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_ANET_10.h
|
Fix compile error with NO_LCD_MENUS
|
2018-08-31 19:16:54 -05:00 |
|
pins_AZTEEG_X1.h
|
Tweak Sanguinololu-related pins files
|
2017-08-23 18:32:59 -05:00 |
|
pins_AZTEEG_X3_PRO.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_AZTEEG_X3.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_BAM_DICE_DUE.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_BQ_ZUM_MEGA_3D.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_BRAINWAVE_PRO.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_BRAINWAVE.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_CHEAPTRONIC.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_CHEAPTRONICv2.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_CNCONTROLS_11.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_CNCONTROLS_12.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_EINSY_RAMBO.h
|
Allow Einsy RAMBo FAN1_PIN override
|
2018-08-13 02:48:25 -05:00 |
|
pins_EINSY_RETRO.h
|
Simplify stepper driver config
|
2018-07-25 03:02:12 -05:00 |
|
pins_ELEFU_3.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_FELIX2.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_GEN3_MONOLITHIC.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_GEN3_PLUS.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_GEN6_DELUXE.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_GEN6.h
|
Minor patches to pins files
|
2017-08-23 18:32:59 -05:00 |
|
pins_GEN7_12.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_GEN7_13.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_GEN7_14.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_GEN7_CUSTOM.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_GT2560_REV_A_PLUS.h
|
Fix GT2560 A+ servo pins
|
2017-12-25 02:20:13 -06:00 |
|
pins_GT2560_REV_A.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_K8200.h
|
|
|
|
pins_K8400.h
|
SPINDLE/LASER pins changes
|
2017-05-17 04:23:06 -05:00 |
|
pins_LEAPFROG.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_MAKEBOARD_MINI.h
|
Fix:EndStops doesn't working with BOARD_RAMPS_14_EFB on Micromake C1 (#8041)
|
2017-10-21 00:24:22 -05:00 |
|
pins_MEGACONTROLLER.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_MEGATRONICS_2.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_MEGATRONICS_3.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_MEGATRONICS.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_MELZI_CREALITY.h
|
Better handling of DELAY_NS and DELAY_US (#10717)
|
2018-05-12 04:22:55 -05:00 |
|
pins_MELZI_MAKR3D.h
|
Melzi boards include melzi pins
|
2018-02-10 15:03:20 -06:00 |
|
pins_MELZI_MALYAN.h
|
Better handling of DELAY_NS and DELAY_US (#10717)
|
2018-05-12 04:22:55 -05:00 |
|
pins_MELZI_TRONXY.h
|
Better handling of DELAY_NS and DELAY_US (#10717)
|
2018-05-12 04:22:55 -05:00 |
|
pins_MELZI.h
|
Melzi boards include melzi pins
|
2018-02-10 15:03:20 -06:00 |
|
pins_MIGHTYBOARD_REVE.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_MINIRAMBO.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_MINITRONICS.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_MKS_BASE_15.h
|
Add BOARD_MKS_BASE_15 with digital micro-stepping
|
2018-04-18 22:06:25 -05:00 |
|
pins_MKS_BASE_HEROIC.h
|
Add BOARD_MKS_BASE_15 with digital micro-stepping
|
2018-04-18 22:06:25 -05:00 |
|
pins_MKS_BASE.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_MKS_GEN_13.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_MKS_GEN_L.h
|
Non-conflicting CS pins for MKS Gen L
|
2018-06-30 02:35:45 -05:00 |
|
pins_OMCA_A.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_OMCA.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_PRINTRBOARD_REVF.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_PRINTRBOARD.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_RAMBO.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_RAMPS_13.h
|
|
|
|
pins_RAMPS_ENDER_4.h
|
Add Creality Ender-4 configurations
|
2018-02-24 22:01:16 -06:00 |
|
pins_RAMPS_OLD.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_RAMPS_PLUS.h
|
Adding support for using the MKS_12864OLED with the SSD1306 controller
|
2017-12-16 17:44:34 -06:00 |
|
pins_RAMPS.h
|
Simplify stepper driver config
|
2018-07-25 03:02:12 -05:00 |
|
pins_RIGIDBOARD_V2.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_RIGIDBOARD.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_RUMBA.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_SAINSMART_2IN1.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_SANGUINOLOLU_11.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_SANGUINOLOLU_12.h
|
Tweak Sanguinololu-related pins files
|
2017-08-23 18:32:59 -05:00 |
|
pins_SAV_MKI.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_SCOOVO_X9H.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_SETHI.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_SILVER_GATE.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_STB_11.h
|
Tweak Sanguinololu-related pins files
|
2017-08-23 18:32:59 -05:00 |
|
pins_TEENSY2.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_TEENSYLU.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_TRIGORILLA_13.h
|
Update Fan 2 and E0 Auto Fan pins for Trigorilla
|
2018-05-29 12:24:37 -05:00 |
|
pins_TRIGORILLA_14.h
|
Fix Trigorilla include typo
|
2018-07-03 20:22:36 -05:00 |
|
pins_ULTIMAIN_2.h
|
Allow FAN_PIN override, pins cleanup (#10957)
|
2018-06-07 16:39:11 -05:00 |
|
pins_ULTIMAKER_OLD.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pins_ULTIMAKER.h
|
Update Ultimaker servo pin
|
2018-08-21 11:38:45 -05:00 |
|
pins_ZRIB_V20.h
|
Rename MKS_13 to MKS_GEN_13
|
2018-04-18 22:16:16 -05:00 |
|
pins.h
|
Fix enter key spasm
|
2018-05-20 07:50:07 -05:00 |
|
pinsDebug_list.h
|
Chamber temperature monitoring and auto fan control.
|
2018-04-06 23:09:44 -05:00 |
|
pinsDebug_plus_70.h
|
Support for SilverGate Board
|
2017-10-31 15:26:27 -05:00 |
|
pinsDebug_Teensyduino.h
|
Apply three spaces after pin defines
|
2018-03-28 12:26:44 -05:00 |
|
pinsDebug.h
|
Fix DIGITAL_PIN_TO_ANALOG_PIN macro for Atmega1284p (#9883)
|
2018-03-01 15:14:08 -06:00 |
|
planner_bezier.cpp
|
Float maths updates for 2.0.x parity (#11213)
|
2018-07-06 21:44:33 -05:00 |
|
planner_bezier.h
|
|
|
|
planner.cpp
|
[1.1.x] Fix planner computation (#11709)
|
2018-09-03 00:29:13 -05:00 |
|
planner.h
|
Float maths updates for 2.0.x parity (#11213)
|
2018-07-06 21:44:33 -05:00 |
|
point_t.h
|
Cleanup Nozzle class, fix XY vs Z move order
|
2017-11-05 18:14:18 -06:00 |
|
power_loss_recovery.cpp
|
Add POWER_LOSS_PIN support
|
2018-07-18 19:58:06 -05:00 |
|
power_loss_recovery.h
|
Fix and improve POWER_LOSS_RECOVERY (#11186)
|
2018-07-02 23:21:18 -05:00 |
|
power.cpp
|
Fix 5 mixing steppers, etc.
|
2018-08-29 03:21:43 -05:00 |
|
power.h
|
Patch Power class
|
2018-02-10 15:36:42 -06:00 |
|
printcounter.cpp
|
Float maths updates for 2.0.x parity (#11213)
|
2018-07-06 21:44:33 -05:00 |
|
printcounter.h
|
Float maths updates for 2.0.x parity (#11213)
|
2018-07-06 21:44:33 -05:00 |
|
runout.cpp
|
Import FilamentRunoutSensor with debounce (#9947)
|
2018-03-05 01:49:19 -06:00 |
|
runout.h
|
Move some Stepper methods to Planner (#10719)
|
2018-05-12 09:29:17 -05:00 |
|
SanityCheck.h
|
Sanity-check SERVO pin for servo probes
|
2018-08-30 18:33:37 -05:00 |
|
Sd2Card.cpp
|
Tiny improvement to M7219
|
2018-08-02 18:43:36 -05:00 |
|
Sd2Card.h
|
Add pin_t to Marln 1.1 branch
|
2018-02-08 21:01:41 -06:00 |
|
SdBaseFile.cpp
|
Clean up and consolidate SD-related code (#10832)
|
2018-05-24 01:19:12 -05:00 |
|
SdBaseFile.h
|
Clean up and consolidate SD-related code (#10832)
|
2018-05-24 01:19:12 -05:00 |
|
SdFatConfig.h
|
Clean up and consolidate SD-related code (#10832)
|
2018-05-24 01:19:12 -05:00 |
|
SdFatStructs.h
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
|
SdFatUtil.cpp
|
Use serial macros where possible
|
2018-02-16 17:53:47 -06:00 |
|
SdFatUtil.h
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
|
SdFile.cpp
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
|
SdFile.h
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
|
SdInfo.h
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
|
SdVolume.cpp
|
Clean up and consolidate SD-related code (#10832)
|
2018-05-24 01:19:12 -05:00 |
|
SdVolume.h
|
Cleanup, apply standards to SD lib, cardreader
|
2017-11-15 01:09:06 -06:00 |
|
serial.cpp
|
Use serial macros where possible
|
2018-02-16 17:53:47 -06:00 |
|
serial.h
|
Add USE_MARLINSERIAL conditional
|
2018-05-24 05:51:14 -05:00 |
|
servo.cpp
|
Smarter MIN, MAX, ABS macros
|
2018-05-13 04:51:33 -05:00 |
|
servo.h
|
Update servo.* for parity with 2.0.x
|
2018-03-08 19:32:32 -06:00 |
|
softspi.h
|
Overhaul of G33 Delta Calibration (#8821)
|
2018-04-11 19:12:56 -05:00 |
|
speed_lookuptable.h
|
Minimal include for speed_lookuptable
|
2017-12-05 21:44:59 -06:00 |
|
status_screen_DOGM.h
|
LCD strlen functions like 2.0.x
|
2018-07-17 15:25:58 -05:00 |
|
status_screen_lite_ST7920_class.h
|
Fix include in lite status screen
|
2018-06-11 21:30:49 -05:00 |
|
status_screen_lite_ST7920_spi.h
|
Lightweight status screen for ST7920
|
2018-02-22 00:46:25 -06:00 |
|
status_screen_lite_ST7920.h
|
Fix SD percent for Lite Status Screen
|
2018-08-26 17:13:58 -05:00 |
|
stepper_dac.cpp
|
Float maths updates for 2.0.x parity (#11213)
|
2018-07-06 21:44:33 -05:00 |
|
stepper_dac.h
|
Apply const to axis args
|
2017-12-11 00:20:29 -06:00 |
|
stepper_indirection.cpp
|
[1.1.x] Fix TMC2208 SW serial communication (#11548)
|
2018-08-14 18:44:17 -05:00 |
|
stepper_indirection.h
|
Simplify stepper driver config
|
2018-07-25 03:02:12 -05:00 |
|
stepper.cpp
|
[1.1.x] Better timing handling (#11462)
|
2018-08-06 23:14:11 -05:00 |
|
stepper.h
|
Eliminate stepper.* signed/unsigned warnings
|
2018-06-27 23:06:49 -05:00 |
|
stopwatch.cpp
|
Add Stopwatch::resume method
|
2018-04-21 19:09:31 -05:00 |
|
stopwatch.h
|
Add Stopwatch::resume method
|
2018-04-21 19:09:31 -05:00 |
|
temperature.cpp
|
Ensure ADC conversion is complete before reading (#11370)
|
2018-07-26 03:58:33 -05:00 |
|
temperature.h
|
Ensure ADC conversion is complete before reading (#11370)
|
2018-07-26 03:58:33 -05:00 |
|
thermistornames.h
|
Add thermocouple with AD8495 support
|
2018-05-02 08:41:31 -05:00 |
|
thermistortable_1.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_2.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_3.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_4.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_5.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_6.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_7.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_8.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_9.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_10.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_11.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_12.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_13.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_15.h
|
Add thermistor 15 tuned for JGAurora A5
|
2018-01-21 16:57:47 -06:00 |
|
thermistortable_20.h
|
Chamber temperature monitoring and auto fan control.
|
2018-04-06 23:09:44 -05:00 |
|
thermistortable_51.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_52.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_55.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_60.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_66.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_70.h
|
Update BQ Hephestos 2 config, NTC-70 table (#10902)
|
2018-06-07 21:23:43 -05:00 |
|
thermistortable_71.h
|
Remove oversampled data from thermistor table 71 (#11504)
|
2018-08-13 02:52:48 -05:00 |
|
thermistortable_75.h
|
Update of comments in thermistor table files. No functional changes.
|
2017-12-31 14:46:56 +01:00 |
|
thermistortable_110.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_147.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_501.h
|
Add thermistor 501 (100K Zonestar)
|
2018-07-03 18:10:55 -05:00 |
|
thermistortable_998.h
|
Add OV() macro for thermistor tables
|
2017-11-15 03:20:36 -06:00 |
|
thermistortable_999.h
|
Add OV() macro for thermistor tables
|
2017-11-15 03:20:36 -06:00 |
|
thermistortable_1010.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortable_1047.h
|
Split up thermistor tables
|
2016-12-19 14:47:54 -08:00 |
|
thermistortables.h
|
Loosen static assertion guarding overflow in SCAN_THERMISTOR_TABLE (#11240)
|
2018-07-11 16:42:23 -05:00 |
|
tmc_util.cpp
|
Simplify stepper driver config
|
2018-07-25 03:02:12 -05:00 |
|
tmc_util.h
|
Simplify stepper driver config
|
2018-07-25 03:02:12 -05:00 |
|
twibus.cpp
|
Apply standards for whole-file conditions
|
2018-02-04 21:17:03 -06:00 |
|
twibus.h
|
Clean up some trailing spaces
|
2017-07-01 22:32:20 -05:00 |
|
types.h
|
Fix types.h dependency
|
2018-02-25 22:01:01 -06:00 |
|
ubl_G29.cpp
|
Minor spacing fixes
|
2018-08-07 14:00:48 -05:00 |
|
ubl_motion.cpp
|
Float maths updates for 2.0.x parity (#11213)
|
2018-07-06 21:44:33 -05:00 |
|
ubl.cpp
|
Improve UBL mesh report. Add M420 T, M421 N
|
2018-04-17 15:55:38 -05:00 |
|
ubl.h
|
Silentninja1 idex crash fix (#11329)
|
2018-07-24 14:44:50 -05:00 |
|
ultralcd_impl_DOGM.h
|
Clean up 12864 OLED code (#11388)
|
2018-07-30 23:02:12 -05:00 |
|
ultralcd_impl_HD44780.h
|
Add card.longest_filename, more lcd_strlen updates
|
2018-07-17 19:33:57 -05:00 |
|
ultralcd_st7565_u8glib_VIKI.h
|
Update DELAY_10US
|
2018-07-26 20:21:50 -05:00 |
|
ultralcd_st7920_u8glib_rrd.h
|
Update BQ Hephestos 2 config, NTC-70 table (#10902)
|
2018-06-07 21:23:43 -05:00 |
|
ultralcd.cpp
|
No raise when homing after power-loss
|
2018-08-07 13:50:33 -05:00 |
|
ultralcd.h
|
LCD strlen functions like 2.0.x
|
2018-07-17 15:25:58 -05:00 |
|
utf_mapper.h
|
[1.1.x] Buffer overflow and scroll fix, UTF8 cleanup (#10851)
|
2018-05-25 23:31:19 -05:00 |
|
utility.cpp
|
Rename float32 => float52, etc.
|
2018-05-01 04:41:56 -05:00 |
|
utility.h
|
Float maths updates for 2.0.x parity (#11213)
|
2018-07-06 21:44:33 -05:00 |
|
vector_3.cpp
|
Float maths updates for 2.0.x parity (#11213)
|
2018-07-06 21:44:33 -05:00 |
|
vector_3.h
|
Add a struct defining EEPROM storage
|
2018-01-05 15:47:51 -06:00 |
|
Version.h
|
Restore bugfix README, etc.
|
2018-08-07 13:45:03 -05:00 |
|
watchdog.cpp
|
Fix watchdog in WATCHDOG_RESET_MANUAL mode AVR
|
2017-11-03 04:45:13 +01:00 |
|
watchdog.h
|
|
|
