0278ad0a6d
Add ESP32 WiFi interface ( #11209 )
2019-03-13 00:48:08 -05:00
c03df89921
ExtUI Mesh Leveling Extensions ( #13363 )
2019-03-13 00:45:52 -05:00
050eac03af
Single X Duplication Extension ( #13373 )
...
* Multi-nozzle selective duplication
* Use a bit-mask, reduce stepper_indirection.h size
* Tweak the multi-nozzle duplication description
* Use 'S' as a bool in M605
* Add HAS_DUPLICATION_MODE conditional
* Remove '_MODE' from the option name
* M605 in the style of Stacker M280
* Also include direct mask style (P)
2019-03-13 00:42:50 -05:00
ad91476d26
Fix USEABLE_HARDWARE_PWM
2019-03-13 00:12:46 -05:00
d63da4592d
Tweak to SCARA_move_to_cal
2019-03-12 22:06:50 -05:00
51ff5b68fa
Clean up fastIO ahead of PWM patch
2019-03-12 20:39:55 -05:00
388babbcea
Tweak SERIAL_PRINTF
2019-03-11 20:58:27 -05:00
d94e077901
Apply HAS_HOTEND_OFFSET where needed
2019-03-11 20:58:27 -05:00
11d6a939df
Always define axis_unhomed_err
2019-03-11 20:58:27 -05:00
10c8c034bd
Allow both encoder and ADC keypad ( #13355 )
2019-03-11 18:10:56 -05:00
31ff7da7ac
Add missing CHAMBER options (for M141) ( #13371 )
2019-03-11 16:50:07 -05:00
0375e92847
Followup to serial rework
...
As mentioned in #13370
2019-03-11 16:46:04 -05:00
013bb469ca
Fix compilation for STM32F1 with no SDIO ( #13366 )
2019-03-11 16:40:51 -05:00
e52bcc9408
Limit top bed temp to BED_MAXTEMP - 10
...
The chances of a 10° overshoot is pretty minimal.
2019-03-11 16:32:34 -05:00
98b55421a5
Clean up some temp config
2019-03-11 16:31:23 -05:00
785a7028bf
Followup to 'volatile' patch ( #13369 )
...
Originally #13344
2019-03-11 15:01:57 -05:00
aa1d587128
Some LCD code cleanup
2019-03-11 05:07:31 -05:00
fa11427ec6
Remove obsolete LCD_CONTRAST
2019-03-11 03:33:07 -05:00
4df9509ead
Add support for printers with inverted fan pins ( #13362 )
...
Add support for printers with inverted fan pins by adding `#define FAN_INVERTING 1` to `Configuration_adv.h` and modifying the fan write macros.
2019-03-10 20:51:21 -05:00
1f7e220387
Make HAL ISR macros function-like
2019-03-10 20:44:27 -05:00
e3ce346f24
Report position to host in Nozzle::park
2019-03-10 19:09:28 -05:00
77b4176152
Use lib include for bit_constants.h
2019-03-10 19:09:28 -05:00
3419099f0a
Clean up whitespace
2019-03-10 19:09:28 -05:00
4c43e6c48b
Fix "spontaneous heating" issue (WRITE bug) on STM32 ( #13356 )
...
Should fix "spontanous heating" problems due to order of operations error. Error occurs at least with ststm32 v5.1.0 in PlatformIO.
2019-03-10 17:25:54 -05:00
b824a517aa
Add G38.4 and G38.5 ( #13348 )
2019-03-10 17:22:09 -05:00
e4d080e63c
Reset after kill with a button on the KILL_PIN ( #13091 )
2019-03-10 09:57:38 -05:00
c36989c39e
Fix chamber temperature measurement ( #13350 )
2019-03-10 09:51:13 -05:00
12503fce06
Followup to wait_for_user fix
2019-03-10 09:14:02 -05:00
33a08fc6f7
Fix typos from temperature rework
...
Followup to #12201
2019-03-10 08:28:16 -05:00
2efbcc90c5
Fix wait_for_user compile error ( #13352 )
2019-03-10 08:07:41 -05:00
60e82e3929
Send notifications to ExtUI for M0/M1 ( #13344 )
...
- Send notifications to ExtUI for M0/M1
- wait_for_user can be non-volatile (not changed by interrupt)
C / C++ compilers don't optimize away reads of non-volatile variables when a function call is used between accesses, because *any* variable could be changed by the function call. Since `wait_for_user` can't be changed without a function call, it should be non-volatile so the compiler can optimize away cases where it is read more than once without an intervening function call.
2019-03-09 14:20:37 -06:00
00fc43144a
Follow up fixes to various PRs. ( #13334 )
...
- Ensure `MarlinUI:get_progress` is defined for `ExtUI`.
- Fix for `BACKLASH_SMOOTHING` with small segments.
`BACKLASH_SMOOTHING` with extremely small segments failed to fully correct due to the correction factor being rounded down. Rounding up ensures the entire backlash will converge to zero even for small segments.
- Add pinout for the beta revision `EINSY_RETRO`.
- Update soft endstops with tool offsets (for toolchange et. al. move clamping) (#12568 )
2019-03-09 14:20:37 -06:00
c7d618b4d9
Fix SERIAL_ECHOLNPAIR
...
Fix #13333
2019-03-09 14:20:37 -06:00
d54741eda8
Update some G26 plausible values. Add speed control. ( #13330 )
2019-03-08 03:13:44 -06:00
fb3302feda
Fix STM32F1 Serial and ADC pins ( #13331 )
2019-03-08 02:21:32 -06:00
dbead66988
Allows user to set (almost) any PWM frequency ( #12638 )
2019-03-08 02:15:42 -06:00
afbec5ff7e
Have ExtUI::getProgress use ui.get_progress ( #13328 )
2019-03-07 18:00:38 -06:00
645ca7af7a
M141 Heated Chamber, Temperature rework ( #12201 )
2019-03-07 02:09:39 -06:00
44571775bd
Further support for 6 extruders
2019-03-07 01:00:56 -06:00
8d95019442
LPC176x NeoPixel Support ( #13322 )
2019-03-06 23:54:19 +00:00
893ee68b52
Clean up trailing whitespace
2019-03-06 01:02:43 -06:00
39f1222060
One fewer G29 error string
2019-03-05 23:04:52 -06:00
543fc4c117
Mention 2.0.x 8-bit support earlier in README ( #13317 )
2019-03-05 23:03:00 -06:00
cfdb38eda4
Allow SERIAL_ECHOPAIR to take up to 12 pairs ( #13311 )
2019-03-05 06:46:19 -06:00
4771e372a1
Update criteria for PAUSE/RESUME/STOP menu items ( #13294 )
2019-03-05 06:46:06 -06:00
56fdcf93d1
Disallow SD_DETECT_INVERTED with FYSETC F6. ( #13307 )
2019-03-05 06:45:28 -06:00
7ce13a6ec1
Fix a print_job_timer compile error ( #13304 )
2019-03-05 06:39:15 -06:00
6df51201ae
Include EXTENSIBLE_UI in single LCD sanity check ( #13306 )
2019-03-05 06:33:36 -06:00
2e5a3b01fd
Save Power Loss Recovery only on move commands
2019-03-05 02:43:29 -06:00
15738ea506
Update a motion comment
2019-03-05 00:50:29 -06:00
Hadrien Jouet