Commit Graph

116 Commits

Author SHA1 Message Date
Erik van der Zalm
13e185d330 removed unused HEATING_EARLY_FINISH_DEG_OFFSET
Simplified stepper inactive time
2012-02-11 23:22:16 +01:00
daid
2a77c84c8f Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0. 2012-02-11 16:02:47 +01:00
Erik van der Zalm
f87c80889f Fixed M109 timer overflow (reported by triffid) 2012-02-09 20:54:49 +01:00
Erik van der Zalm
154de69c02 Print configuration.h version during startup (thanks hairykiwi) 2012-02-09 20:26:17 +01:00
Erik van der Zalm
598eb1d4f1 Fixed compilation for gcc-4.6.2 with avr-lib-1.8.0 (thanks daid) 2012-02-09 19:38:53 +01:00
Erik van der Zalm
9173a5713b Teensylu support. 2012-02-09 19:27:45 +01:00
Erik van der Zalm
5113513cb2 RC 1 2012-02-08 18:28:54 +01:00
Erik van der Zalm
d8a0c6450f Split the configuration file in two parts.
One for common settings.
One for advanced settings.
2012-02-07 20:23:43 +01:00
Erik van der Zalm
e45e5c68bb Added support for Gen3+ (Pins file only)
Added late z enable. (blddk request)
Only calculate look ahead if >2 moves in buffer.
Removed some FORCE_INLINE to save memory.

Signed-off-by: Erik van der Zalm <erik@vdzalm.eu>
2012-02-05 12:42:15 +01:00
haxar
6cc6029d7a M109 EOL fix when TEMP_RESIDENCY_TIME is undefined; printer interface (pronterface) could not see target extruder heater temperature to continue print 2012-01-22 03:25:56 -08:00
Bernhard
157aa7f2fd m115 eol fix 2012-01-15 20:51:49 +01:00
Bernhard
7aeb45303d small mistake 2012-01-15 18:31:21 +01:00
Bernhard
cee5f9020a added suicide pin for a power supply to the arduino that is only active if the arduino is holding high for an output. 2012-01-15 17:06:10 +01:00
Bernhard
57f9359a41 simplified the includes, makefile now works with arduino23 2011-12-22 14:55:45 +01:00
Bernhard
3c1a4aac2b header file simplification 2011-12-22 12:38:50 +01:00
Bernhard
212515148e added m240 photography support. default off 2011-12-22 12:11:39 +01:00
Erik van der Zalm
554cc1718d Fiexed E_ENABLE_PIN errors 2011-12-15 11:59:07 +01:00
Erik van der Zalm
617968ab76 G92 fix 2011-12-12 20:43:47 +01:00
Erik van der Zalm
84d9cf7339 merging 2011-12-12 20:35:46 +01:00
Erik van der Zalm
e017228569 Merged multiple extruder support.
Soft PWM. (Sanguinololu can also have PID temperature control)
Interrupt save WRITE for addresses > 0x0FF
2011-12-12 19:34:37 +01:00
Bernhard
06411d5c9e ultralcd can now also stop the wait loop for the hot-end m109 heating when stopping sd prints. 2011-12-11 22:18:50 +01:00
Bernhard
01001b89d2 repaired nozzle runout prevention to not collide with automatic stepper disabeling. 2011-12-11 15:42:56 +01:00
Bernhard Kubicek
f6fe7143e4 Merge pull request #29 from k-eex/Marlin_v1
Fix M201 not saving settings in all places, so the changes did not get written into EEPROM
2011-12-09 06:37:42 -08:00
Bernhard
dde4b40fa9 disable steppers in runout prevention 2011-12-09 15:37:24 +01:00
Bernhard
2bc5e7ec9e prevent too long extrudes, or too cold extrudes 2011-12-09 15:09:52 +01:00
Bernhard
aa4f9a6474 better values. 2011-12-09 14:09:34 +01:00
Bernhard
87fd249c43 made runout prevention independent of tempeorarily set esteps 2011-12-09 13:56:28 +01:00
Bernhard
1ec0c3b68a extruder runout prevention. 2011-12-09 13:39:00 +01:00
Bernhard
5b4625f79c added a partial release option to "m84" aka "stepper release". If you do tiny layers, you might want to keep the z-axis powered to not loose height positioning after homeing. 2011-12-09 12:51:08 +01:00
Keegi
bae1e422f6 Fix M201 not saving settings in all places, so the changes did not get written into EEPROM 2011-12-08 12:25:32 +02:00
Bernhard
986f0ba76c moved <stdio.h> to more dominant location. 2011-12-07 20:56:47 +01:00
Bernhard
460b788d78 repaired homing position setting. 2011-12-07 20:54:34 +01:00
Denis B
4fd75dc813 Working version of multiple extruders (up to 3)
- The temperature control is pretty much complete
  (not sure what to do w/ autotemp though)
  Changed the pins assignment to clearly separate bed and extruder heaters
  and temp sensors, changed a bit how termistor tables are handled.
- The steppers control is rudimentary
  (only chanages what pins it uses depending on the active_extruder var,
   but that's enough for switching extruder in the start.gcode in the
   the profiles)
- Tested only w/ RAMPS 1.4
2011-12-06 00:09:16 -05:00
Bernhard
12e8edcac3 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2011-12-04 22:27:37 +01:00
Bernhard
cf50ba140f added M503 to display eeprom storage, and renamed eeprom routings. This version is compatible with the qtmarlin eeprom-tab. 2011-12-04 22:26:42 +01:00
Erik van der Zalm
b99c49ec3b Add option to only check endstop when homing 2011-12-04 20:17:21 +01:00
Bernhard
7714b98da7 solved some compiler warnings that are now visible in arduino 1.0.
Found a couple of unused variables, that I commented.
Tried to solve the program memory warning message, and failed.
2011-12-04 12:40:18 +01:00
Bernhard
dfd240b260 overworked autotemp, removed one layer of nesting from the ultralcd. 2011-12-04 09:48:53 +01:00
Bernhard
4f909963e4 make QUICKHOME configureable 2011-12-04 09:02:09 +01:00
Bernhard
b0c3871750 more fixing of the sanguino math round problem 2011-11-30 09:07:56 +01:00
Bernhard
716e89b87c first homing move diagonal towards home switches. 2011-11-29 22:11:45 +01:00
Bernhard
e4ab0e5982 more inlines 2011-11-28 22:11:17 +01:00
Bernhard
8cb29921a0 possible stepper release after sd printing 2011-11-28 22:09:17 +01:00
Bernhard
044886b4a0 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2011-11-28 21:52:16 +01:00
Erik van der Zalm
6d95644c0d Moved M88 into M84. (M84 E) 2011-11-28 21:49:54 +01:00
Bernhard
311627141b Merge branch 'smallopt' into Marlin_v1
Conflicts:
	Marlin/temperature.h
2011-11-28 21:36:01 +01:00
Erik van der Zalm
7216a12856 Disabled M88 for boards that don't have seperate enable pins. 2011-11-28 21:17:06 +01:00
Erik van der Zalm
98805c9228 Added M88 command. (Request from Action68) 2011-11-28 20:51:01 +01:00
Erik van der Zalm
f75f426dfa Removed interrupt nesting in the stepper ISR.
Add serial checkRx in stepper ISR.
Copied HardwareSerial to MarlinSerial (Needed for checkRx).
2011-11-27 21:12:55 +01:00
Bernhard
2d9a715655 first naive attempt to have a offset in the homeing procedure. Does not enable to move into regions not allowed by endstops. 2011-11-27 17:27:17 +01:00