Scott Lahteine
d2647c1f19
Fix G1 behaviour after tool unpark
...
Fix #10777 for 2.0.x
Co-Authored-By: Ante Vukorepa <o.orcinus@gmail.com>
2018-05-22 00:53:00 -05:00
GMagician
3c76bda2d8
Fix switching extruder
...
`DONT_SWITCH` got lost along the way. Replace it with `DO_SWITCH_EXTRUDER` and adjust the code.
2018-05-19 17:05:15 -05:00
Scott Lahteine
306f0f2135
Move Stepper::synchronize to Planner ( #10713 )
...
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-05-12 01:38:02 -05:00
GMagician
21a47b50f4
Additional tool-change fixes ( #10304 )
...
Followup to #10257
2018-04-04 17:06:33 -05:00
Scott Lahteine
2672120a97
Do a small raise for all move-back
2018-03-31 22:43:05 -05:00
Scott Lahteine
5acccbacc1
Simplified leveling-based tool change
2018-03-31 22:43:05 -05:00
Scott Lahteine
d1734a089a
Split up tool_change for some setups
2018-03-31 22:43:05 -05:00
Scott Lahteine
b6a55f0891
Temporary workaround for tool-change compile error
...
Pending a more complete solution to tool-change Z deviation.
2018-03-29 17:55:57 -05:00
Scott Lahteine
bb7236a750
Z correction on tool-change for all HAS_MESH ( #10199 )
2018-03-23 13:12:00 -05:00
Scott Lahteine
c6ff39cc14
Spacing cleanup
2018-03-17 16:49:08 -05:00
Scott Lahteine
a6feb58837
Delta support for multiple hotends with offsets ( #10118 )
2018-03-16 00:46:42 -05:00
Scott Lahteine
2bea1bda56
Move more strings to PROGMEM
2018-01-24 00:06:06 -06:00
Scott Lahteine
fadf9eb2d7
Simplify midpos calculation
2017-11-27 14:00:35 -06:00
GMagician
118ac61e59
[2.0.x] Tool change bad behaviour fix
...
Previous fix did not work as expected when axeis not homed. It raise Z but never return to original position
2017-11-22 20:24:03 -06:00
GMagician
a61127a421
[2.0.x] tool change bad behaviours
...
This will solve 2 issues on tool change.
1) when no home is done ("no_move" is set) tool change should never move X & Y because... I don't know where I am...only Z should be adjusted to avoid bed collision if other nozzle is lower than current.
Since no move no bed level matrix should be applied
2) When SWITCHING_NOZZLE is enabled and system is homed there are two movements to go to destination, but first can move Z to older position and then crash on the bed
2017-11-20 16:34:55 -06:00
Scott Lahteine
c0000a0cdc
Move servo code to modules/servo.*
2017-11-19 14:23:02 -06:00
Scott Lahteine
06ee6584fd
Remove offsets from soft endstops, tool change
2017-11-11 22:47:38 -06:00
Scott Lahteine
79772219ae
Fix Fan Multiplexer init
2017-11-04 22:28:46 -05:00
Scott Lahteine
f8393a0908
Operate in Native Machine Space
2017-11-04 00:05:38 -05:00
Roxy-3D
72156a2029
change to better (more clear) names ( #8050 )
...
set_destination_to_current() changed to set_destination_from_current()
set_current_to_destination() changed to set_current_from_destination()
2017-10-21 11:42:26 -05:00
Scott Lahteine
c0dddd4233
Tweaks to tool_change, GcodeSuite::T()
2017-10-14 02:53:19 -05:00
Scott Lahteine
3e3911fb81
Use planner.leveling_active for all leveling systems
2017-10-14 02:18:31 -05:00
Scott Lahteine
9a930ebec2
Make leveling_is_active a macro
2017-10-14 02:18:31 -05:00
Thomas Moore
0cb00f52d9
Cleanup warnings
2017-09-30 16:47:17 -05:00
GMagician
c508e9adec
Fix compiler error
...
Added missing include file,
called 'leveling_is_active()' with no prototipe defined.
2017-09-25 23:18:26 +02:00
Scott Lahteine
07cf75883f
Move T (tool change) to cpp
2017-09-21 16:27:10 -05:00
Scott Lahteine
1a37ebc76d
Move M163-M165 MIXING_EXTRUDER to cpp
2017-09-21 16:27:10 -05:00
Scott Lahteine
75cf17d816
Move M702 MK2_MULTIPLEXER to cpp
2017-09-21 16:27:08 -05:00
Scott Lahteine
4a220a8b79
Move M380_M381 to cpp, solenoid feature
2017-09-21 16:27:06 -05:00
Scott Lahteine
51f195e698
Move dwell to gcode
2017-09-21 16:26:48 -05:00
Scott Lahteine
4231faf779
Initial split-up of G-code handlers by category
2017-09-21 16:26:45 -05:00
