Commit Graph

1626 Commits

Author SHA1 Message Date
Scott Lahteine
20b3af1cc2 Use homing_feedrate function 2020-12-16 22:19:04 -06:00
Scott Lahteine
c824086825 Adjust planner debugging 2020-12-13 01:54:31 -06:00
ellensp
22de37ad50
Fix UBL Debug Messages (#20423)
Co-authored-by: ellensp <ellensp@hotmsil.com>
2020-12-10 15:30:58 -03:00
Jason Smith
21ee7b1c86
Fix TMC_HOME_PHASE divide by zero (#20368) 2020-12-04 23:58:39 -06:00
Scott Lahteine
8fd8772a6f
Adjust axis homed / trusted methods (#20323) 2020-11-29 19:06:40 -06:00
Jason Smith
df0a0c9490
Leveling Fade Height default setting (#20316) 2020-11-29 15:00:08 -06:00
Štěpán Dalecký
5cae4e9f55
[WIP] Fix Probe::offset_xy (#20290)
Co-authored-by: Jason Smith <jason.inet@gmail.com>
2020-11-26 13:21:48 -08:00
wmariz
58ac815822
Level Corners with Probe option (#20241) 2020-11-26 07:58:19 -06:00
Scott Lahteine
7ce675e604 No auto debug for EEPROM_CHITCHAT 2020-11-26 03:56:21 -06:00
Jason Smith
3a396a25dc
Retire HAL for STM32F4 / F7 (#20153) 2020-11-26 00:37:18 -06:00
Scott Lahteine
296a2ad7e4 Consistent Probe XY offset type 2020-11-24 17:38:26 -06:00
Jason Smith
a4e1132048
Fix Z4 in ENABLE/DISABLE_AXIS_Z (#20256)
This was accidentally broken in PR #20218
2020-11-23 03:07:43 -08:00
Jason Smith
58eaad703a
Fix dummy thermistors for Bed, Chamber, Probe (#20247) 2020-11-22 18:47:52 -06:00
Orel
8db72d027e
Skip unnecessary (costly) SW Stepper Enable (#20218)
Co-authored-by: Jason Smith <jason.inet@gmail.com>
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-11-21 16:27:06 -06:00
Simone Primarosa
615bf2a6f1
Fix bad SET_FAST_PWM_FREQ calls (#20227) 2020-11-20 19:53:04 -06:00
Till
fcc29fc189
Add Thermistor 20-21 notes (#19246) 2020-11-19 14:07:47 -06:00
JoAnn Manges
cb2ec628df
Use RTD for MAX31865 reading (#20188) 2020-11-18 23:12:03 -06:00
Giuliano Zaro
41529b6598
SMUFF (MMU2 clone) support (#19912) 2020-11-18 01:27:21 -06:00
FanDjango
110e0d782f
Guards for large BLOCK_BUFFER_SIZE (>=128) (#20130)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-11-16 14:56:05 -06:00
Victor Oliveira
ea371618da
Add Touch Calibration screen (#20049) 2020-11-15 16:39:58 -06:00
phcay
a97a1ae218 Fix extraneous Linear Advance DIR change (#20131) 2020-11-13 20:06:37 -06:00
Scott Lahteine
1d43e81be0 Fix compile warnings, serial alias 2020-11-13 18:28:15 -06:00
LinFor
f4e9f3654e
Fix MAX6675 SPI init, conflicts (#20086) 2020-11-11 16:27:45 -06:00
JoAnn Manges
40d442fde2
Fix MAX31865 on SPI (PT100/1000) support (#20074) 2020-11-11 15:52:35 -06:00
Costas Basdekis
0465e0ae3a
Distinct runout states (#19965)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-11-11 00:39:23 -06:00
Scott Lahteine
59eca253e1 Simplified temp sensor conditionals 2020-11-09 01:17:37 -06:00
qwewer0
c753d2b7f4
Use extra G35 BLTouch HS Mode clearance in Tramming Wizard (#20057)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-11-08 18:31:14 -06:00
Jason Smith
5013fdaf79
Fix tool-change servo index for E2 and up (#20060) 2020-11-08 02:15:30 -06:00
Scott Lahteine
06bf3ccfb7 Add alternative TERN macros 2020-11-07 22:19:25 -06:00
Scott Lahteine
dcb0f5dc3b Temperature 'autostart' => 'auto_job' 2020-11-07 21:21:19 -06:00
Albert van Osch
7beebcd315
Zonestar Z8 XM2 support (#19991) 2020-11-07 16:59:19 -06:00
LinFor
2da25d67e1
Fix Endstop Interrupts with SPI endstops, sanity checks (#20051)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-11-07 03:37:45 -06:00
Orel
a272c019f9
Rename, adjust Dagoma F5 (#19947) 2020-10-29 20:02:29 -05:00
Scott Lahteine
54ec6a0ce2 Tweak code formatting 2020-10-29 01:14:15 -05:00
Jason Smith
bdb3f1ae2f
Fix LCD menus + DAC (#19907) 2020-10-27 21:40:12 -05:00
Orel
e3f1f7cd85
Fix DAC-related bugs (#19921)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-10-27 21:37:10 -05:00
Lucas Seiki Oshiro
c0b4f4eb47
"Sound: ON/OFF" menu item (#19901)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-10-27 20:41:12 -05:00
Marcio Teixeira
a74e82fbae Fix NO_WORKSPACE_OFFSETS compile 2020-10-27 15:05:30 -05:00
Scott Lahteine
0ffee29a11
Case light brightness cleanup (#19856)
Co-authored-by: Chris <chris@chrisnovoa.com>
2020-10-22 22:31:48 -05:00
Scott Lahteine
c75e98dc84 Shorten a method name 2020-10-22 20:54:11 -05:00
qwewer0
c7f7f2403d
Fix Chopper Timing extra axis defaults (#19850) 2020-10-22 20:46:48 -05:00
ManuelMcLure
4fccb92e07
Configure TMC interpolation per driver (#19828) 2020-10-22 06:27:33 -05:00
bilsef
9baa944460
Teensy 4.1 Ethernet support (#19801) 2020-10-20 14:35:29 -05:00
Scott Lahteine
92767f5513 Misc. cleanup, serial strings 2020-10-19 20:39:36 -05:00
Scott Lahteine
21ce39aa9b Use PGM serial strings 2020-10-19 04:25:48 -05:00
InsanityAutomation
6375829448
Apply home offsets to probing, Z Safe Homing (#19423)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-10-18 15:53:12 -05:00
Jago Strong-Wright
c2802d35bb
Distinct Chopper Timing settings (#19781)
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-10-17 22:35:19 -05:00
Sten Uusvali
6fed11896b
Fix M503 output for M907 motor current (#19777)
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-10-17 16:11:22 -05:00
Scott Lahteine
eaf6777a66 Rename ultralcd => marlinui 2020-10-16 19:55:18 -05:00
nb-rapidia
418b3e5ee2
Fix IDEX layer shift and DIR states (#19756)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-10-16 16:59:55 -05:00
Victor Oliveira
0b80841c38
Fix Color UI external_control, wait_for_release (#19771)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-10-16 16:19:48 -05:00
Victor Oliveira
e370834c35
Handle M410 in the main task (#19752) 2020-10-16 16:11:00 -05:00
Jason Smith
9a23fb5863
Fix SET_SOFT_ENDSTOP_LOOSE w/out soft endstops (#19734) 2020-10-14 13:50:03 -05:00
Scott Lahteine
733eb127e9 Simple bool in soft_endstops_t 2020-10-13 14:55:14 -05:00
Earle F. Philhower, III
193c0a52d9
Add loose soft endstop state, apply to UBL fine-tune (#19681)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-10-12 16:48:04 -05:00
Jason Smith
a866a758cc
Allow MAX31865 resistance values configuration (#19695) 2020-10-12 00:40:39 -05:00
Jason Smith
edda32e6b4
Fix motion compile w/out probe-oriented settings (#19684) 2020-10-11 19:42:50 -05:00
Jason Smith
c762b7c91b
Fix various errors, warnings in example config builds (#19686)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-10-11 19:06:57 -05:00
Scott Lahteine
492ba2a111
Digipots refactor / cleanup (#19690) 2020-10-11 14:58:35 -05:00
Victor Oliveira
8e03a4cb93
Keep HAL tasks running during PID Autotune (#19671) 2020-10-09 23:35:41 -05:00
Scott Lahteine
2c6ec0c999 Chamber vent/fan followup 2020-10-06 19:42:11 -05:00
ladismrkolj
2c99c1e06f
Add Chamber servo vent, auto fan (#19519) 2020-10-06 18:36:01 -05:00
ellensp
d88e694d06
Fix Z_AFTER_HOMING without probe (#19607) 2020-10-04 16:47:06 -05:00
qwewer0
4424645e04
Multi-line comments cleanup (#19535) 2020-09-28 14:53:50 -05:00
Scott Lahteine
c2c6a679ea
Rename LCD conditionals (#19533) 2020-09-28 01:13:27 -05:00
Emperor
00c09e95ac
Thermistor: Kis3d Silicone heater + precision cast plate (#19528) 2020-09-27 21:38:30 -05:00
Siana Gearz
7415e4e66d
Fix Allen Key Probe pin test (#19520) 2020-09-27 21:25:35 -05:00
Scott Lahteine
ecc8013812 Whitespace cleanup 2020-09-23 17:43:32 -05:00
ellensp
e3d4e328f9
Preserve brightness in EEPROM validate (#19485)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-09-23 15:44:15 -05:00
Jason Smith
5d0429ee2a
Catch a TMC address conflict early (#19458) 2020-09-22 20:36:31 -05:00
Victor Oliveira
79dc8a2297
Define <u8,u8,u8>::softSPI (#19419) 2020-09-22 15:44:17 -05:00
makerbase
d8ed749045
Add MKS Robin E3P, improve LVGL UI (#19442) 2020-09-20 20:55:02 -05:00
Scott Lahteine
76d8d1742c Add multi-extruder condition 2020-09-20 20:51:21 -05:00
Marcio T
9fd06fa767
Fix case light brightness save/load (#19436) 2020-09-19 09:23:56 -05:00
cosmoderp
073b7f1e3a
E3 V2 DWIN: Z-Offset, cleanup, versatility (#19384)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-09-17 05:35:04 -05:00
ellensp
979876e958
Improve temperature runaway, idle timeout (#19339)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-09-13 23:58:39 -05:00
Scott Lahteine
49ca16c3fb heater_ind_t => heater_id_t 2020-09-13 18:22:28 -05:00
ManuelMcLure
c04d5624da
Read from backup TMC StealthChop state (#19364) 2020-09-12 22:59:20 -05:00
Neskik
1917ed8741
M872 wait for probe temperature (#19344) 2020-09-11 22:51:19 -05:00
bilsef
049fbc92a9
Support for Teensy 4 (#19311) 2020-09-09 18:57:20 -05:00
Giuliano Zaro
828a582f4d
Make M600 heat up the nozzle. Reset runout on fail. (#19298)
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-09-07 21:29:45 -05:00
Scott Lahteine
a445746a8b Clean up LCD conditionals, DWIN 2020-09-06 23:21:42 -05:00
Victor Sokolov
e97e6865c3
MarkForged kinematics (#19235) 2020-09-03 20:12:53 -05:00
Scott Lahteine
e0b413cf19 Add set_all_homed 2020-08-27 16:38:26 -05:00
swissnorp
a12ac5e175
Mark axes not-homed with HOME_AFTER_DEACTIVATE (#18907) 2020-08-27 16:05:53 -05:00
Scott Lahteine
462d3eeab1 set_axis_not_trusted => set_axis_never_homed 2020-08-27 14:49:00 -05:00
thordarsen
195d20cef2
Fix SINGLENOZZLE fan speed bug (#19152) 2020-08-26 05:23:56 -05:00
Scott Lahteine
4955aa5b78 Prusa => Průša 2020-08-26 02:15:50 -05:00
Colin Godsey
131ddeaeba
Direct Stepping update (#19135) 2020-08-26 01:32:56 -05:00
Giuliano Zaro
f67ad6fd70
Fix auto-power in PID autotune (#19119) 2020-08-24 09:54:25 -05:00
Scott Lahteine
7807b613d5 Update some comments 2020-08-21 02:59:23 -05:00
Giuliano Zaro
3426c7fc94
Configurable number of M106 fans (#18883) 2020-08-19 20:11:20 -05:00
Steven Haigh
a62ae2aa2d
Default Filament Runout Sensor enabled state (#19013) 2020-08-19 18:58:18 -05:00
Giuliano Zaro
d3c5161476
Fix __ARM__ / __arm__ typo (#19063) 2020-08-19 02:59:37 -05:00
Giuliano Zaro
f205bff2cc
Fix PSU on for PID autotune (#19066) 2020-08-19 02:49:46 -05:00
Scott Lahteine
56b35fc103 Do runout.reset after EEPROM read 2020-08-14 00:16:22 -05:00
swissnorp
3ddb720722
Fix 'sync_plan_position' call (#19016) 2020-08-13 22:37:57 -05:00
Giuliano Zaro
ce3df42e22
Fix DISABLE_[XYZE] code (#18970)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-08-09 20:48:57 -05:00
cbaugher
837dc4727d
Tool-change Z move followup (#18963) 2020-08-09 15:46:47 -05:00
sherwin-dc
852e5ae042
Password via G-code and MarlinUI (#18399)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-08-08 20:00:42 -05:00
Scott Lahteine
97cb0a8c3e General cleanup 2020-08-08 00:17:09 -05:00
Scott Lahteine
18adfe87bc configuration_store => settings 2020-08-07 20:52:23 -05:00
cbaugher
7b2f7a94fa
Fix Z height after tool change (#18951) 2020-08-07 18:06:25 -05:00
Scott Lahteine
99ba866d8d
Optimize G-code / feature dependencies (#18919) 2020-08-06 08:14:00 -05:00
swissnorp
4856ac5028
Add Z_AFTER_DEACTIVATE to account for gravity (#18906) 2020-08-04 00:31:45 -05:00
Alexander Gavrilenko
117df87d19
Support for TFT & Touch Screens (#18130) 2020-07-30 01:43:19 -05:00
Victor Tseng
5d14c3712f
Fix DELTA + TMC sensorless homing + SPI endstops (#18811) 2020-07-27 20:15:14 -05:00
MKS-Sean
d20d459132 Robin nano V2, TFT LVGL UI parameters, and more (#18500) 2020-07-25 01:18:06 -05:00
Scott Lahteine
d1e20eb29f Update links, README, contributing, etc. 2020-07-23 20:46:51 -05:00
Diego von Deschwanden
42fbd527f3
Fix links to secure sites (#18745) 2020-07-22 22:20:14 -05:00
Jason Smith
f9b1da7beb
Linear Advance: Only change E DIR when needed (#18744) 2020-07-22 22:17:33 -05:00
Jason Smith
a847f37d43
Reduce Step Smoothing ceiling to 50% CPU usage (#18719) 2020-07-19 21:53:29 -05:00
Victor Oliveira
4a55bdb165
Only download & compile required libraries (#18699) 2020-07-19 21:42:30 -05:00
Scott Lahteine
ef90cb7c97 PLR followup 2020-07-15 01:20:52 -05:00
Jason Smith
76b67d55e2
Fix some Power Loss Recovery behaviors (#18558) 2020-07-15 01:14:03 -05:00
Scott Lahteine
55e519a06f General cleanup 2020-07-14 21:27:49 -05:00
Scott Lahteine
2d33a9fd7c Add REPORT_FAN_CHANGE as an option 2020-07-14 21:15:14 -05:00
Scott Lahteine
b40440cf38 Tool-change debug option 2020-07-14 21:15:14 -05:00
Scott Lahteine
0e1cb10909
Fix / improve menu items (#18644) 2020-07-13 19:59:32 -05:00
Speaka
2c238e4fc2
Option for extra endstop check (#18424) 2020-07-12 13:16:56 -05:00
Axel
c4dd0082a1
Option to assist thermocouple debug (#18621) 2020-07-11 00:23:48 -05:00
Scott Lahteine
73fc0778b8
Consolidate probe clearance, add section debug (#18576)
* Better section / function log
* Add do_z_clearance motion function
2020-07-08 21:44:21 -05:00
ellensp
c2e0e61fe8
Fix User Temp Sensor (1000), reversed Pt100 / Pt1000 (#18590) 2020-07-08 06:28:32 -05:00
Scott Lahteine
d6682c8609 Whitespace cleanup 2020-07-07 02:30:26 -05:00
Scott Lahteine
9546847dc1 Temp Residency followup 2020-07-07 01:51:09 -05:00
ellensp
12e7106a8a
Update and fix POWER_MONITOR (#18561) 2020-07-06 18:53:26 -05:00
espr14
ea8c3a9388
Reduce 'first loop' temperature residency time (#18421)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-07-06 18:52:21 -05:00
Giuliano Zaro
9ee891c4a6
Fix TMC homing phase coils alignment (#18528)
Co-authored-by: Fabio Santos <fabiosan@live.com>
2020-07-06 17:32:33 -05:00
J.C. Nelson
6f14d2d37f
Add Lerdge S,X,K (#18302) 2020-07-06 17:08:52 -05:00
Robby Candra
c02451b602
Filament Runout Inverting => State (#18537)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-07-05 17:42:19 -05:00
Scott Lahteine
dc6d8357a6 Reduce string duplication 2020-07-05 16:00:32 -05:00
ellensp
6df927d3b2
Fix thermistors exist-for-reading tests (#18533)
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-07-04 20:04:31 -05:00
Scott Lahteine
f6a2b64091
Clean up LCD Manual Move / UBL Mesh Edit (#18373) 2020-07-03 09:53:22 -05:00
Scott Lahteine
7b6629c08c Extend thermistor 1047 to 500°C 2020-07-01 23:07:44 -05:00
Scott Lahteine
c43bbcce15
Enforce sensor range for temperature target (#18465)
* Mitigate stepper timeout

* Add CHAMBER PWM code

* Structured thermistor tables

* Fix reversed sensor ranges

* Prevent temps outside sensor range
2020-07-01 16:27:28 -05:00
Scott Lahteine
70fa4c9323
Per-Hotend Default PIDs (#18483) 2020-07-01 16:18:20 -05:00
Scott Lahteine
48151d1778 ClosedLoop as singleton 2020-06-28 14:35:23 -05:00
Fabio Santos
29753baeee
Adjustable delta_diagonal_rod_trim (#18423) 2020-06-27 23:53:44 -05:00
JP Flouret
31349fd69a
Fix "probing failed" false positives (#18435) 2020-06-27 23:09:15 -05:00
InsanityAutomation
c1dcc56a0b
Tool Change Migration fixes and debugging (#18448) 2020-06-27 21:57:01 -05:00
Scott Lahteine
a907e15ae6 Allow larger ADC debounce
Reference #17205
2020-06-26 19:31:07 -05:00
Scott Lahteine
f445bc26e5 Minor LCD cleanup, improvement 2020-06-25 22:23:22 -05:00
Scott Lahteine
43a994e0df Fix material preset editing 2020-06-24 20:15:23 -05:00
Scott Lahteine
4275466f49
Fix issues with no hotend / bed / fan (#18395) 2020-06-24 19:44:50 -05:00
Fabio Santos
25c7c43a82
Add SERIAL_FLOAT_PRECISION option (#18367) 2020-06-22 21:12:45 -05:00
Kirill Vergun
1ea4e393c9 No 'probing failed' with retry (#18379) 2020-06-22 19:50:46 -05:00
MoellerDi
3bfbd47c6d
Fix 3-point middle point (#18383) 2020-06-22 15:37:14 -05:00
Scott Lahteine
31167c158b TMCStepper 0.7.0 2020-06-21 22:17:48 -05:00
brian park
bc9e5e2abc
Fix _CAN_HOME (Y homing) bug (#18356) 2020-06-19 18:19:29 -05:00
Giuliano Zaro
88e4dffe88
Fix PID autotune timeout (#18352) 2020-06-18 16:05:12 -05:00