MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity
155 Commits 1 Branch 0 Tags 129 MiB
59205ac5fc
Commit Graph

143 Commits

Author SHA1 Message Date
Bernhard
59205ac5fc preliminiary implementation for the early heating finish. 
Might be replaced by something more clever, e.g. by erik, and does not yet support the second extruder or the bed.
its kind of not so cool, because you need 6 more ints.
Maybe isheating() should use the degrees directly, as it is not used in time-critical anyways.
Then it would be much easier. to have the offsets without additional variables.
 2011-11-30 08:51:46 +01:00
Bernhard
7a4be21b4f made it compile if arduino decides to include files in a differnt order. DEC HEX and stuff now defined in MarlinSerial.h 2011-11-30 08:32:28 +01:00
Bernhard
716e89b87c first homing move diagonal towards home switches. 2011-11-29 22:11:45 +01:00
Bernhard
d00b7e5587 repaired compiliation in windows 2011-11-28 22:45:40 +01:00
Bernhard
e4ab0e5982 more inlines 2011-11-28 22:11:17 +01:00
Bernhard
8cb29921a0 possible stepper release after sd printing 2011-11-28 22:09:17 +01:00
Bernhard
044886b4a0 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2011-11-28 21:52:16 +01:00
Bernhard
b19c8b74b9 force inline 2011-11-28 21:51:44 +01:00
Erik van der Zalm
6d95644c0d Moved M88 into M84. (M84 E) 2011-11-28 21:49:54 +01:00
Bernhard
311627141b Merge branch 'smallopt' into Marlin_v1 
Conflicts:
	Marlin/temperature.h
 2011-11-28 21:36:01 +01:00
Erik van der Zalm
7216a12856 Disabled M88 for boards that don't have seperate enable pins. 2011-11-28 21:17:06 +01:00
Erik van der Zalm
98805c9228 Added M88 command. (Request from Action68) 2011-11-28 20:51:01 +01:00
Bernhard
85da81e673 inlineing of small functions in serial 2011-11-28 19:34:42 +01:00
Bernhard
b9ad0bb2ce removed unecessary indirect register adressing in serial. 2011-11-28 19:28:38 +01:00
Bernhard
dd5ca68c87 get rid of indirect ringbuffer calls, made some inlines, removed virtual and streaming class requirements. 2011-11-28 19:13:40 +01:00
Erik van der Zalm
dd5296ad4d Fixed temperature reading bug. 
(When using the lower and upper adc input bank)
 2011-11-28 17:42:49 +01:00
Erik van der Zalm
f75f426dfa Removed interrupt nesting in the stepper ISR. 
Add serial checkRx in stepper ISR.
Copied HardwareSerial to MarlinSerial (Needed for checkRx).
 2011-11-27 21:12:55 +01:00
Bernhard
2d9a715655 first naive attempt to have a offset in the homeing procedure. Does not enable to move into regions not allowed by endstops. 2011-11-27 17:27:17 +01:00
Bernhard
d2f034ba84 lcd message from gcode, m117 2011-11-27 16:53:11 +01:00
Bernhard
6aecf80278 add autotemp support to the lcd 2011-11-27 16:45:19 +01:00
Bernhard
b128d25f27 overlooked some inlines.. 2011-11-27 16:45:00 +01:00
Bernhard
26a1de1e44 force inline 2011-11-27 16:04:58 +01:00
Bernhard
f8e170a44b planner optimization by inline functions 2011-11-27 14:57:12 +01:00
Erik van der Zalm
aad4b75b94 First parts 2nd extruder 2011-11-26 17:33:25 +01:00
Bernhard
a0dc66f7bf Home retract distance configureable per axis. 2011-11-26 12:04:06 +01:00
Bernhard
6d6f323535 make an option if sd-card stop should release the steppers. 2011-11-26 11:51:38 +01:00
Bernhard
4d6a5c29df disable steppers as routine in stepper.cpp 2011-11-26 11:50:23 +01:00
Bernhard
74d0032e25 cooldown blocking selectable by #define. 2011-11-26 09:03:12 +01:00
Bernhard
191f36b493 slowdown 2011-11-25 23:59:30 +01:00
Bernhard
c54a807824 overworked ultralcd a bit 2011-11-25 23:37:08 +01:00
Bernhard
a6823a84e1 another typo 2011-11-25 22:36:33 +01:00
Bernhard
57e163e989 typo 2011-11-25 22:34:12 +01:00
Bernhard
b58787a367 now velocities are also set in mm/sec in gcode. 2011-11-25 22:32:26 +01:00
Bernhard
71ca78982b Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2011-11-25 22:14:36 +01:00
Bernhard
235051253a overworked lcd+eeprom to have only mm/sec and PID including pid_dt 2011-11-25 22:14:29 +01:00
Erik van der Zalm
27654bfe69 Fixed variable (removed 0x) 2011-11-25 22:10:06 +01:00
Erik van der Zalm
cdf0bd4e63 Fixed config bug when EEPROM was disabled 2011-11-25 20:07:30 +01:00
Erik van der Zalm
6ac9b2e761 Fixed residency time bug. (Thanks to Sound :-) ) 2011-11-25 19:34:36 +01:00
Erik van der Zalm
ac8adabb2b Small nominal speed improvement. 2011-11-25 15:32:50 +01:00
Erik van der Zalm
0e0e4945d8 Removed ISR overtaken message from ISR routine 2011-11-25 13:59:58 +01:00
Erik van der Zalm
c0f8c9fd72 Seperate ENDSTOP_INVERTING for X Y and Z 
Added simple endstop filter.
Corrected M114 count display.
 2011-11-25 13:43:06 +01:00
Bernhard Kubicek
5535e51bf6 Yes, thats the beta. 2011-11-20 17:04:57 +01:00
Bernhard Kubicek
8b14a8ad34 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2011-11-20 16:39:39 +01:00
Bernhard Kubicek
924bab1a03 less lcd flickering 2011-11-20 16:37:01 +01:00
Bernhard Kubicek
379ea642e1 make tuneing sub-menu. 2011-11-20 16:05:42 +01:00
Erik van der Zalm
959d82e81e Small temperature disable bug. 2011-11-20 15:03:35 +01:00
Erik van der Zalm
15bb3f284e Merge branch 'Marlin_v1', remote-tracking branch 'origin/Marlin_v1' into Marlin_v1 2011-11-20 14:51:40 +01:00
Erik van der Zalm
4e5becfc51 Added endstop reporting 2011-11-20 14:50:08 +01:00
Bernhard Kubicek
eeb4f029db Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2011-11-20 14:45:38 +01:00
Bernhard Kubicek
b21d5193f2 made ultralcd compatible with folders. 2011-11-20 14:43:47 +01:00