Commit Graph

7959 Commits

Author SHA1 Message Date
Scott Lahteine
5938dae200 Merge pull request #6950 from MagoKimbra/fix_g29_3_point
Fix G29 with 3 point
2017-06-04 12:15:44 -05:00
Scott Lahteine
c5e0f08e35 Merge pull request #6951 from fixoid/patch-4
Initializing extruder/nozzle servo when turning on the printer
2017-06-04 12:13:05 -05:00
Scott Lahteine
1e2ccca063 Merge pull request #6952 from thinkyhead/bf_final_fixups_123
General cleanup before release
2017-06-04 11:51:07 -05:00
Scott Lahteine
e4937b0285 Cleanup of spacing and formatting 2017-06-04 11:31:43 -05:00
fixoid
1aab9906e6 Initializing extruder/nozzle servo when when turning on the printer 2017-06-04 16:57:24 +03:00
MagoKimbra
663ff7f92a Fix G29 with 3 point 2017-06-04 14:39:31 +02:00
oldmcg
9f295581f0 Ubl delta fixes and improvements (#6941)
* Change all direct changes of ubl.state.active to
  set_bed_leveling_enabled() which handles apply/unapply
  leveling to maintain current_position consistency.

Fix invalidation of UBL mesh to invalid unreachable
  mesh points as well (delta corners).

Fix UBL_DELTA unapply_leveling logic and when
it gets applied, including fade_height changes.

Add optional M114 D for detailed position information,
disabled from compilation by default (M114_DETAIL).

* UBL_DELTA raw and inline kinematics

* UBL planner fall through fix

* consistent variable names

* Cleanup orphaned code and whitespace changes.
Use _O2.

* compile warnings cleanup

* Remove redundant #ifdef condition
2017-06-03 17:11:43 -05:00
Bob-the-Kuhn
862def2ef4 Merge pull request #6947 from Bob-the-Kuhn/allow-GCODE_DEBUG-when-UBL-enabled
Allow DEBUG_GCODE_PARSER when UBL is enabled
2017-06-03 13:34:46 -05:00
Bob-the-Kuhn
6a5d3b580d fix "hex_address not defined" when UBL is enabled 2017-06-03 13:19:55 -05:00
Scott Lahteine
d336e413aa Merge pull request #6942 from thinkyhead/bf_cleanups_friday
General cleanup after recent commits
2017-06-03 00:48:57 -05:00
Scott Lahteine
789b2928a8 Tweak scrolling message code 2017-06-02 23:45:53 -05:00
Scott Lahteine
fc7d7f87b4 Init probe test pin with FastIO 2017-06-02 23:45:52 -05:00
Scott Lahteine
0282452cea Make Parser::seen volatile 2017-06-02 23:45:52 -05:00
Scott Lahteine
9a305a467b Patch LCD Contrast menu item 2017-06-02 23:45:52 -05:00
Scott Lahteine
90ccac4bcf Clean up after recent commits 2017-06-02 23:45:52 -05:00
Bob-the-Kuhn
fff50d3958 Merge pull request #6940 from Bob-the-Kuhn/Gcode---allow-XY
Gcode.cpp - spaces and parameters
2017-06-02 21:21:32 -05:00
Bob-the-Kuhn
2130f10de8 allow space between parameter and value 2017-06-02 19:57:22 -05:00
Bob-the-Kuhn
ebda4663c3 for discusion 2017-06-02 19:42:43 -05:00
Scott Lahteine
e2c3695e11 Merge pull request #6932 from thinkyhead/bf_zrib_2.0
Support for ZRIB v2.0 Control Board
2017-06-02 16:54:34 -05:00
FATALHERMIT
911079104e Support for ZRIB v2.0 Control Board 2017-06-02 12:05:46 -05:00
Scott Lahteine
65a0212866 Easier override of FILWIDTH_PIN 2017-06-02 12:05:46 -05:00
Scott Lahteine
147d9d76fc Merge pull request #6928 from Bob-the-Kuhn/Fix-case-light-logic-on-Azteeg-X3-boards
Fix case light logic on Azteeg_X3 boards.
2017-06-01 20:14:15 -05:00
Scott Lahteine
9118e135f9 Merge pull request #6931 from thinkyhead/bf_malyan_m150
Malyan m150 configurations
2017-06-01 19:52:38 -05:00
guntherv73
4288c4fb4f Configurations for Malyan M150 2017-06-01 19:26:29 -05:00
Scott Lahteine
1919cb0d1e Config cleanups 2017-06-01 19:26:16 -05:00
Scott Lahteine
e800743268 Merge pull request #6921 from tcm0116/pause_flash
Fix issues with advanced pause
2017-06-01 18:04:25 -05:00
Bob-the-Kuhn
9a9bbfc57c Fix case light logic on Azteeg_X3 boards. 2017-06-01 12:33:24 -05:00
Thomas Moore
a32f7b329c Fix heater status display for advanced pause 2017-06-01 12:29:47 -05:00
Scott Lahteine
ac33a378c0 Merge pull request #6922 from thinkyhead/bf_probe_options
Prevent illegal leveling combinations
2017-06-01 11:12:02 -05:00
Scott Lahteine
445865ea03 REPRAPWORLD_KEYPAD is NEWPANEL but not ULTIPANEL 2017-05-31 23:48:03 -05:00
Scott Lahteine
4296a8b74e For status scrolling, pad a short message 2017-05-31 23:48:03 -05:00
Scott Lahteine
4a96433b7e Simplify counting of printable characters 2017-05-31 23:45:41 -05:00
Scott Lahteine
8d69394ae1 Fix LCD printing of progmem strings 2017-05-31 23:36:57 -05:00
Scott Lahteine
c74d4dede6 Prevent illegal leveling combinations
Addressing issue #6901
2017-05-31 23:36:57 -05:00
Scott Lahteine
155aa62fb0 Merge pull request #6912 from thinkyhead/bf_better_pulse_delay
Account for dual XYZ in pulse delay cycles estimate
2017-05-31 22:21:47 -05:00
Scott Lahteine
a5fa586642 Preferred patch to gcode.h 2017-05-31 21:18:16 -05:00
Bob-the-Kuhn
4ecd41ef90 Merge pull request #6915 from Bob-the-Kuhn/gcode.h-2
gcode.h - another compile error
2017-05-31 14:03:33 -05:00
Bob-the-Kuhn
1b41e1f645 another compile error
only seen if

#if ENABLED(TEMPERATURE_UNITS_SUPPORT)
      ...
    #if
ENABLED(ULTIPANEL) && DISABLED(DISABLE_M503)
2017-05-31 13:59:49 -05:00
Bob-the-Kuhn
65bd4c8c94 Merge pull request #6797 from Bob-the-Kuhn/M355-case-lightimprovements-(1.1.x)
M355 case light improvements (replaces PR #5685)
2017-05-31 13:33:59 -05:00
Bob-the-Kuhn
7ed0761e09 Merge pull request #6914 from Bob-the-Kuhn/Gcode.h-bug-fix
gcode.h - fix compile error
2017-05-31 13:29:19 -05:00
Bob-the-Kuhn
9657e7d3ee copied file changes from PR #5685
==============================

Configuration_adv.h changes

==============================

add "live" LCD update

==============================

P & S version

==============================

final (hopefully) tested version

==============================

update M115 capabilities print

==============================

Menu changes portion of the requested changes

==============================

changed USEABLE_HARDWARE_PWM from a function to a series of macros

==============================

changes per review
2017-05-31 13:22:38 -05:00
Bob-the-Kuhn
8206bb9bb9 fix compile error
invalid conversion from 'const char*' to 'char*' [-fpermissive]
2017-05-31 13:17:01 -05:00
Scott Lahteine
df91346188 Account for dual XYZ in pulse delay cycles estimate 2017-05-31 12:23:28 -05:00
Scott Lahteine
6354b40231 Merge pull request #6903 from thinkyhead/bf_fix_delta_m24_m125
Patch M24 / M125 for delta
2017-05-31 00:03:20 -05:00
Scott Lahteine
7236109f2a Patch M24 / M125 for delta 2017-05-30 23:07:29 -05:00
Scott Lahteine
be17033762 Fix case light menu toggle 2017-05-30 14:03:45 -05:00
Scott Lahteine
89b93058e3 Merge pull request #6887 from christianh17/PR-sanitycheck
enable DEACTIVATE_SERVOS_AFTER_MOVE with switching nozzle
2017-05-30 13:43:39 -05:00
Scott Lahteine
05b66234ae Merge pull request #6895 from thinkyhead/bf_user_commands
Custom user commands menu
2017-05-30 13:40:50 -05:00
Scott Lahteine
84a0a77c59 Merge pull request #6852 from tcm0116/mixing_extruder_lin_advance
Generate error if MIXING_EXTRUDER and LIN_ADVANCE are both enabled
2017-05-30 13:37:51 -05:00
Scott Lahteine
d33ae33103 Merge pull request #6897 from thinkyhead/bf_fix_lcd_scrolling
Fix LCD scrolling character counting
2017-05-30 03:45:59 -05:00