MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity
12,418 Commits 1 Branch 0 Tags 129 MiB
81209f5310
Commit Graph

12418 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Christian Thalhammer
fa2e3a40e9 fixed LCD manual z axis move Feedrate to 70 (was 1700) 2012-03-01 14:38:50 +01:00
Christian Thalhammer
a92b3afe64 added german translation;Menue should be in english.. sounds better 2012-03-01 14:24:20 +01:00
Christian Thalhammer
9fa586bbed fixed languages; Preheat_PLA and Preheat_ABS was not defined for non 
english
 2012-03-01 14:05:40 +01:00
Daid
00d33e6b82 Typo fix 2012-02-29 19:01:21 +01:00
Daid
7d124478fa Only protect the heater pins for the defined extruders. 
Changed the way the extruder pins are defined so it doesn't create extra -1 entries in the list.
 2012-02-29 15:49:02 +01:00
Daid
3d83109028 Fixed general 16x2 LCD build without SD support. 2012-02-29 15:33:23 +01:00
Christian Thalhammer
cb02914687 Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1 2012-02-29 14:51:35 +01:00
Christian Thalhammer
10bf2bb8e1 - 2012-02-29 14:51:15 +01:00
Daid
d47b666630 Merge branch 'Marlin_v1' of git://github.com/ErikZalm/Marlin into Marlin_v1 2012-02-29 12:19:20 +01:00
Daid
88d289caa1 Made plan_buffer_line arguments const, which optimizes better and fixes the RUNOUT_PREVENTION feature. 2012-02-29 11:38:12 +01:00
Erik van der Zalm
b4833d55c2 Fixed HOME_POS in combination with G28 X0 or G28 Y0 2012-02-28 18:20:03 +01:00
Erik van der Zalm
c6f2ec3c82 remove stop_heating_wait 2012-02-27 18:45:45 +01:00
Erik van der Zalm
b48d67ce10 Fixed homing 2012-02-27 18:31:40 +01:00
ErikZalm
071eec7aa7 Merge pull request #81 from phord/09469add5560ca8a676c42e4bcd499868c33f0dd 
Clean up and add some trace info
 2012-02-27 08:38:36 -08:00
ErikZalm
1ebe7d1ab6 Merge pull request #83 from phord/tempfix 
Add explicit #define for bogus temp override
 2012-02-27 08:36:45 -08:00
ErikZalm
de37b2264a Merge pull request #82 from phord/fix-gen7-build 
pins.h: Define Z_MAX_PIN for Gen7 board
 2012-02-27 08:36:06 -08:00
Phil Hord
b65ef8d66c Add support for upcoming Gen7 v1.4 
V1.4 moves thermistor power to the always-on 5v line.
The BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE is no longer
needed on this board.  Add a new motherboard type to
support this feature.
 2012-02-26 20:39:49 -05:00
Phil Hord
740f0c7690 Add explicit #define for bogus temp override 
The code to ignore the "bad thermistor reading failsafe"
suicide function depends on the existing of the PS_ON pin
feature.  But in some boards this shouldn't be the case
Fix this by adding an explicit definition to make our
intentions more clear and separable.
 2012-02-26 20:26:16 -05:00
Phil Hord
ba8500a236 pins.h: Define Z_MAX_PIN for Gen7 board 
The Z_MAX_PIN value was defined as no-value, but this causes
the compile to fail.  Fix this by setting the Z_MAX_PIN to the
correct value (which happens to be 0 for pin PB0/DIO0/0).
 2012-02-26 20:18:39 -05:00
Phil Hord
09469add55 Add board reset reporting (from Repetier-Firmware) 2012-02-26 18:26:56 -05:00
Phil Hord
f3101e96d9 Add suitable .gitignore to avoid build noise 2012-02-26 18:26:56 -05:00
Phil Hord
245dca4bee Makefile: generic pde=>cpp rule 
This adds flexibility to the makefile by allowing different pde
targets to be specified for different needs.
 2012-02-26 18:26:55 -05:00
Erik van der Zalm
97d42ca2b2 SDSUPPORT default disabled 2012-02-26 22:05:38 +01:00
ErikZalm
2faa0852b9 Merge pull request #79 from changwoo/Marlin_v1 
Fix build on Sanguino based boards with ATmega1284P
 2012-02-26 13:03:15 -08:00
Changwoo Ryu
7b14953c99 Fix build on Sanguino based boards with ATmega1284P 2012-02-27 04:12:55 +09:00
Daid
286d5003fa Fixed compiler warning for Sanguino compile 2012-02-26 17:35:01 +01:00
ErikZalm
66d50562b6 Merge pull request #76 from iXce/Marlin_v1 
Fix Makefile
 2012-02-26 07:30:51 -08:00
Erik van der Zalm
27f595a444 Changed version => RC2 2012-02-26 16:26:40 +01:00
Erik van der Zalm
018c567abf Moved SLOWDOWN function. (jetty840) 
Included AD595 calibration options. (daid)
 2012-02-26 16:23:47 +01:00
Erik van der Zalm
4fbda5c3f5 Merge remote-tracking branch 'daid/Marlin_v1' into Test 2012-02-26 16:10:59 +01:00
Erik van der Zalm
ce714fe306 Fixes in pins.h 2012-02-25 22:55:17 +01:00
Erik van der Zalm
35e57bf149 Added gen6 deluxe. 2012-02-25 17:44:45 +01:00
Erik van der Zalm
84ea2d61e8 Moved gen7 boards to motherboard type 10, 11 and 12. 
Split ramps1.3 in Sprinter like config and multiextruder config.
 2012-02-24 23:34:41 +01:00
Guillaume Seguin
adc108d79e Correctly build the produced applet/Marlin.cpp source 2012-02-24 21:21:19 +01:00
Erik van der Zalm
5aa9c41ab1 Changed comment mode for detection. 
Added M221 extuder multiply factor.
 2012-02-24 20:42:07 +01:00
Erik van der Zalm
00690f7ffd Fix cast warning in Gen7 2012-02-23 18:50:05 +01:00
Erik van der Zalm
01d28c18ab Fixed casting warning in sanguino 2012-02-23 18:45:37 +01:00
Blair Thompson
2fd8c248fe Added Fan control to the pre-heat settings. 
I find that the PID routine works better when the cooling fan is switched on
at the beginning of a warm up routine.  Otherwise when you enable the fan
just before a print, you have a delay as the PIDre-adjusts.

This should also be safer as most cooling fans are directed at the hot -ends
thermal barrier!
 2012-02-22 23:05:52 +00:00
Blair Thompson
d9f2f509d5 Added new menu items under the prepare submenu. 
Instead of a single pre-heat, now there is pre-heat ABS and PLA options
Added defines to the configuration file to adjust preheat temperatures for both
 2012-02-22 22:51:04 +00:00
Erik van der Zalm
ae3e7586c6 Added HOME_POS. This adds the posibility to make the center 0 
Updated the Xsteps ... settings via the LCD menu
 2012-02-22 18:07:56 +01:00
Erik van der Zalm
df1437bd86 Changed display format for some numbers. 2012-02-21 23:05:43 +01:00
Erik van der Zalm
8816ef1c64 Small fixes after merge 2012-02-21 20:36:43 +01:00
Erik van der Zalm
d298dd121f merged SBUBA82 and Justblair 2012-02-21 20:26:59 +01:00
Erik van der Zalm
2cc9a89830 Merge remote-tracking branch 'SCUBA82/Marlin_v1' into Marlin_v1 2012-02-21 20:17:35 +01:00
Erik van der Zalm
a0a1f81913 various changes 2012-02-21 20:17:28 +01:00
Christian Thalhammer
8a8ea50f33 fixed manual axis movement lcd option 2012-02-21 09:31:28 +01:00
Blair Thompson
b976692d0f Removed VS project files for tidyness stakes 2012-02-20 22:39:39 +00:00
Blair Thompson
fe940a142d Added a structure that will allow easy translations/modifications to the LCD menu. 
Signed-off-by: Blair Thompson <mail@justblair.co.uk>
 2012-02-20 22:22:46 +00:00
Christian Thalhammer
b3fb09a20c change preheat to ABS values of nozzle 227 and be 105 °C 
next try for manual axis movement
 2012-02-20 16:07:27 +01:00
Christian Thalhammer
6a3f8cf23f Infos about fuses to use; correct fuses in boards.txt 2012-02-20 10:25:51 +01:00