MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity
6,181 Commits 1 Branch 0 Tags 129 MiB
82b0014f5e
Commit Graph

5055 Commits

Author SHA1 Message Date
Scott Lahteine
1968983f35 Move PROBE_SELECTED to an earlier point 2016-08-25 20:59:44 -05:00
Brian
2fae32f35f Add note suggesting RAMBo users use the RAMBo board type or platformio environment; 
Add note that Viki 2.0 wiring diagram v1.2 has a mistake in it;
 2016-08-25 15:05:29 -04:00
esenapaj
1749a7fae3 Suppress warning 2016-08-24 00:18:06 +09:00
Scott Lahteine
d07d85ac9f Ensure probe points at the delta edge are kept 2016-08-23 05:09:56 -05:00
AnHardt
7e36b76af2 Repair MarlinSerial with TX-buffer 
These '{' are important to avoid the redefinition of `unsigned char _sreg = SREG;`
at the same level.
Used in
```
#define CRITICAL_SECTION_START  unsigned char _sreg = SREG; cli();
```
 2016-08-22 23:40:09 +02:00
Gege2B
1e65f1a1d8 Update french language 2016-08-22 12:46:58 -05:00
Scott Lahteine
ab59280075 MIN_SEGMENTS_FOR_MOVE => MIN_STEPS_PER_SEGMENT 
Follow-up to #4666
 2016-08-21 08:56:03 -05:00
Scott Lahteine
27b80b1dd1 Merge pull request #4667 from thinkyhead/rc_M211_sw_endstop_switch 
M211: Enable/Disable Software Endstops
 2016-08-21 06:44:00 -05:00
Scott Lahteine
14a03727e1 Tweak serialprintPGM 2016-08-21 00:10:09 -05:00
Scott Lahteine
2f223b8c79 Use ABC and XYZ for "3" 2016-08-21 00:10:08 -05:00
Scott Lahteine
4cd1ad8f28 Adjustments to M209, G28, M605 2016-08-21 00:10:08 -05:00
Scott Lahteine
e354cf5884 Apply sw_endstops_enabled to manual move 2016-08-21 00:10:08 -05:00
Scott Lahteine
280534c06f Add M211: Enable/Disable Software Endstops 2016-08-21 00:10:08 -05:00
Scott Lahteine
01d4703429 PREVENT_DANGEROUS_EXTRUDE => PREVENT_COLD_EXTRUSION 
Also improve the documentation of this and related options, and set
EXTRUDE_MINTEMP to 170 everywhere.
 2016-08-20 23:35:27 -05:00
Scott Lahteine
a1f6cf1e5d Merge pull request #4665 from thinkyhead/rc_lcd_not_ultipanel 
Clean up ultralcd code, dependencies on ULTIPANEL
 2016-08-20 22:43:17 -05:00
Scott Lahteine
1a255afa36 Merge pull request #4666 from thinkyhead/rc_dropsegments_adj 
dropsegments => MIN_SEGMENTS_FOR_MOVE
 2016-08-20 22:42:16 -05:00
Scott Lahteine
374f8d2014 dropsegments => MIN_SEGMENTS_FOR_MOVE 2016-08-20 18:52:15 -05:00
Scott Lahteine
76c3f326ff Clean up DOGM code, comments 2016-08-20 18:33:12 -05:00
Scott Lahteine
71319adbb8 Wrap ULTIPANEL-dependent code 2016-08-20 18:33:11 -05:00
Scott Lahteine
305913545e Move number-to-string function to utility.* 2016-08-20 18:33:11 -05:00
Scott Lahteine
394c80c87b Merge pull request #4655 from thinkyhead/rc_serial_static 
Optimize, reduce size of MarlinSerial
 2016-08-20 15:51:57 -05:00
MagoKimbra
28d1e5a946 Fix_Zig_Zag 2016-08-20 11:28:08 +02:00
Scott Lahteine
14395a1a96 Optimize, reduce size of MarlinSerial 2016-08-19 16:53:20 -05:00
Scott Lahteine
4d4c00d69c Merge pull request #4651 from thinkyhead/rc_homing_vs_leveling_z 
Improvements to homing / leveling
 2016-08-19 15:45:49 -05:00
Brian Gortney
8fae3e1f9f Add Rambo support/env to platformio.ini; properly maps extended pins 2016-08-19 07:11:23 -04:00
Scott Lahteine
12d72363cb Do Delta radius check without sqrt 2016-08-19 05:05:48 -05:00
Scott Lahteine
044f800be9 Use SERIAL_PROTOCOLLNPGM in G28 2016-08-19 04:45:33 -05:00
Scott Lahteine
d309a9647d Include probe offset for moving "close to the bed" 2016-08-19 04:45:33 -05:00
Scott Lahteine
35a08eeaeb Use Z_HOME_DIR over axis_home_dir where we can 2016-08-19 04:45:32 -05:00
Scott Lahteine
99b22d5785 Default AUTO_BED_LEVELING_GRID_POINTS to 3 2016-08-19 04:45:32 -05:00
Scott Lahteine
9b1f3f7d12 Sanity-check DELTA + AUTO_BED_LEVELING_GRID_POINTS 2016-08-19 04:45:32 -05:00
Scott Lahteine
733453569b Merge pull request #4650 from thinkyhead/rc_percent_is_percent 
extruder_multiplier => flow_percentage
 2016-08-19 04:38:18 -05:00
Scott Lahteine
55355a4fb8 Make probed points more symmetrical 2016-08-19 04:32:03 -05:00
Scott Lahteine
1f776f6034 Tweak some code comments 2016-08-19 04:32:02 -05:00
Scott Lahteine
748228cf40 Use named indices for delta_grid_spacing 2016-08-19 04:32:02 -05:00
Scott Lahteine
ead333e7da line_to_axis_pos => do_homing_move 2016-08-19 04:32:02 -05:00
Scott Lahteine
7a4ccd7967 Add do_probe_move with Z fixes 2016-08-19 04:32:02 -05:00
Scott Lahteine
a1bad589c9 Augment debug/homing logging 2016-08-19 04:32:02 -05:00
Scott Lahteine
41b5c48129 Update software endstops if EEPROM is loaded 2016-08-19 04:32:01 -05:00
Scott Lahteine
628dcbc764 extruder_multiplier => flow_percentage 2016-08-18 22:13:47 -05:00
Jason Westervelt
d222ee4de2 Update language_ru.h 
Updated missing translations.  Caught up on change to MSG_HOME.
 2016-08-17 13:55:44 -07:00
Scott Lahteine
d63b8e2b2b Additional details for I2C_SLAVE_ADDRESS 2016-08-15 19:27:53 -07:00
Scott Lahteine
7427290d3a Merge pull request #4634 from thinkyhead/rc_lang_disp_char 
Set language display charset in language.h
 2016-08-15 19:25:56 -07:00
Scott Lahteine
aa30550b21 Keep SIMULATE_ROMFONT only language.h 2016-08-15 19:11:31 -07:00
Scott Lahteine
cec61c350d Set language display charset in language.h 2016-08-15 19:01:12 -07:00
Scott Lahteine
165d7abb1b Merge pull request #4625 from thinkyhead/rc_i2c_request_capture_flush 
Add request, capture, flush to TWIBus
 2016-08-15 18:15:43 -07:00
RicardoGA
507784b846 Fix Messages length 2016-08-15 10:30:51 -05:00
Scott Lahteine
bd928a69ec Add request, capture, flush to TWIBus 2016-08-15 00:04:20 -07:00
RicardoGA
7b7f319ed5 Update Spanish Lenguage 
Adds missing messages
 2016-08-14 23:30:43 -05:00
Scott Lahteine
132322e4d9 Fix #4614: currentScreen only defined with ULTIPANEL 2016-08-14 00:29:46 -07:00
Scott Lahteine
dcd26b0403 Merge pull request #4621 from thinkyhead/rc_fan_set_output 
Init PWM-able AUTO_FAN pins with SET_OUTPUT
 2016-08-13 21:22:27 -07:00
Scott Lahteine
79ba983782 Allow reply() to use const string with no warning 2016-08-13 21:05:44 -07:00
Scott Lahteine
3a0a94b21a Always init configured fan pins 2016-08-13 20:38:40 -07:00
Scott Lahteine
c63003ed3e Use matching auto-fan flags 2016-08-13 20:38:40 -07:00
Scott Lahteine
3475fd7b0f Init PWM-able auto fan pins with SET_OUTPUT 2016-08-13 20:38:40 -07:00
Scott Lahteine
abf9696db1 Loop fan-pins based on array size 2016-08-13 20:05:32 -07:00
Scott Lahteine
e88575c8ec Init next_auto_fan_check_ms to zero 2016-08-13 20:05:32 -07:00
Scott Lahteine
7272ec5608 Update HAS_FAN flags for 4 auto fans 2016-08-13 20:05:32 -07:00
Scott Lahteine
7b21811a9a Flags for matching auto-fans 2016-08-13 20:05:32 -07:00
Scott Lahteine
97e0aed304 Further refinements of TWIBus 2016-08-13 18:32:41 -07:00
Scott Lahteine
38fa1b1939 Merge pull request #4196 from cimbalo/Platformio_support 
Add working PlatformIO support
 2016-08-12 17:32:09 -07:00
Scott Lahteine
d7edc039af Merge pull request #4605 from thinkyhead/rc_3drag_fan_is_8 
Fixup 3DRAG pins based on updated RAMPS pins
 2016-08-12 17:30:27 -07:00
Silvio
923388e0c7 Fix acceleration and feedrate following bq/Marlin 2016-08-12 15:42:20 +02:00
Scott Lahteine
405afec393 Include decimeters in filamentUsed display 2016-08-12 05:16:43 -07:00
Scott Lahteine
fef0e8ba86 Merge pull request #4610 from thinkyhead/rc_sd_pause_and_stop 
Fix stopSDPrint so it works when paused
 2016-08-12 04:09:22 -07:00
Scott Lahteine
192ac2dfd7 Squish some CardReader code 2016-08-12 03:32:42 -07:00
Scott Lahteine
61932b859e Fix bug in CardReader::stopSDPrint 
If the SD print is paused, it cannot be stopped
 2016-08-12 03:21:10 -07:00
Scott Lahteine
9e5d5a3b7c Merge pull request #4597 from tnw513/italian_fix 
Added hyphenated strings for full graphic display
 2016-08-12 02:37:53 -07:00
Silvio Didonna
f999292eea added hyphenated letters for full graphic display and fixed some strings 2016-08-12 08:57:22 +02:00
Scott Lahteine
67f119d18b Add an i2c request handler 2016-08-11 18:09:18 -07:00
Scott Lahteine
2d3db5b5bd Fixup pins_3DRAG based on updated RAMPS pins 2016-08-11 15:49:47 -07:00
Scott Lahteine
d29a64d4b3 Merge pull request #4603 from thinkyhead/rc_less_MSG_MOVE 
Strip never-translated strings from language files
 2016-08-11 14:21:58 -07:00
Scott Lahteine
d6a7ca6553 Merge pull request #4584 from thinkyhead/rc_delta_cal_more 
Use configured feedrates, center in DELTA_CALIBRATION_MENU
 2016-08-11 14:04:05 -07:00
Scott Lahteine
d3b432adca Strip never-translated strings from language files 2016-08-11 13:41:07 -07:00
Scott Lahteine
1a558ef486 Tweak MarlinSerial precursor 2016-08-11 12:47:06 -07:00
Scott Lahteine
802818f7ab Cleanup SdFatUtil.h 2016-08-11 12:47:06 -07:00
Scott Lahteine
52560e257f Merge pull request #4595 from thinkyhead/rc_i2c_slave 
Add support for i2c slave address
 2016-08-11 12:39:26 -07:00
Scott Lahteine
432e9a1f50 Use configured feedrates, center for DELTA_CALIBRATION_MENU 2016-08-11 12:05:55 -07:00
Scott Lahteine
cd496dd9bd do_blocking_move_to can't be 'inline', takes const ref args 2016-08-11 12:05:55 -07:00
Scott Lahteine
dd75fca4d9 Make M155 / M156 a bit more flexible 2016-08-11 00:52:01 -07:00
Scott Lahteine
a99ecf71d8 Add support for i2c slave address 2016-08-10 23:30:35 -07:00
Scott Lahteine
b63d70b186 Fix serial output for MBL, M303 2016-08-10 18:49:52 -07:00
Scott Lahteine
a36a168af2 Use the truly configured middle on Delta 2016-08-10 00:03:22 -07:00
Scott Lahteine
58c8e6cef2 Fixes #4576: Convert filamentUsed to long for display 2016-08-09 23:57:28 -07:00
Scott Lahteine
01f1f779a5 Followup to #4574, specify L for long 2016-08-09 23:43:37 -07:00
Kaibob2
1c7bd17e60 Update language_de.h with MSG_MOVE_E1 - E4 
MSG_MOVE_E1 was missing
MSG_MOVE_E2 was missing
MSG_MOVE_E3 was missing
MSG_MOVE_E4 was missing

I assigned "0" to "MSG_MOVE_E1", "1" to "MSG_MOVE_E2" and so on, as this is what i assume to be the standard naming for the first (E0) and second (E1) extruder. This would have to be changed inthe other languages too :(
 2016-08-09 20:49:26 +02:00
Scott Lahteine
880cdb553b Include days in Graphical LCD print timer 2016-08-08 23:21:36 -07:00
Scott Lahteine
f4ac8c15e3 Merge pull request #4573 from thinkyhead/rc_mintemp_bed_later 
Throw MINTEMP BED error only if heating
 2016-08-08 23:02:42 -07:00
Scott Lahteine
b7b5b50a84 Throw bed min temp error only if heating 2016-08-08 22:49:22 -07:00
Scott Lahteine
d3ba878f70 Drop intermediate float in HEATER_0_USES_MAX6675 test 2016-08-08 22:49:22 -07:00
Scott Lahteine
3e8f9ecd1c Extend min/max_temp_error for the bed 2016-08-08 22:49:21 -07:00
Scott Lahteine
1f15f0df5f Merge pull request #4572 from thinkyhead/rc_digital_clock_100h 
Show up to 99:59 in digital time
 2016-08-08 22:28:29 -07:00
Scott Lahteine
8100a4dace Fix a compile error in EMERGENCY_PARSER sanity check 2016-08-08 21:49:57 -07:00
Scott Lahteine
45f67164b6 Simplify the delay in kill() 2016-08-08 21:49:34 -07:00
Scott Lahteine
30b1c731b5 Show up to 99:59 in digital time 2016-08-08 21:26:34 -07:00
Scott Lahteine
3be4511230 Patch command order in delta calibration menu 2016-08-08 21:15:25 -07:00
Scott Lahteine
9afa060ed6 Merge pull request #4570 from thinkyhead/rc_proper_delta_calibration 
Make DELTA_CALIBRATION_MENU more universal
 2016-08-08 21:11:40 -07:00
Scott Lahteine
46c8862635 Merge pull request #4564 from AnHardt/max-spi-setup 
MISO is an input
 2016-08-08 21:01:15 -07:00
Scott Lahteine
88540d8ecf Fix: LCD displays SD status at startup 2016-08-08 20:53:18 -07:00
Scott Lahteine
b16ea09498 Make DELTA_CALIBRATION_MENU more universal 2016-08-08 20:42:58 -07:00
Scott Lahteine
3a56836ead Always disable SLOWDOWN for DELTA/SCARA 2016-08-08 18:06:46 -07:00
AnHardt
aa9b52b2e7 MISO is an input 2016-08-08 20:09:57 +02:00
Scott Lahteine
67c4acf750 Merge pull request #4562 from thinkyhead/rc_fix_z_dual_endstops 
Fix Z_DUAL_ENDSTOPS with Z MIN Homing
 2016-08-07 19:23:09 -07:00
Scott Lahteine
e113740fa3 Specify that Z_PROBE_*_HEIGHT is nozzle-relative 2016-08-07 17:54:17 -07:00
Scott Lahteine
462e189edd Move pullups after Z_DUAL_ENDSTOPS block 2016-08-07 17:43:02 -07:00
Scott Lahteine
367dad5902 Sanity check Z_DUAL_ENDSTOPS with DELTA 2016-08-07 17:08:41 -07:00
Scott Lahteine
5fca110e0d Fix Z_DUAL_ENDSTOPS with MIN homing 2016-08-07 17:08:41 -07:00
Scott Lahteine
fc11f05c11 Merge pull request #4556 from thinkyhead/rc_all_feedrates_mm_s 
Within Marlin, maintain most feed rates in mm/s
 2016-08-07 16:14:16 -07:00
Scott Lahteine
7b2abe6fc8 Use steps_to_mm in extruder runout prevent 2016-08-07 00:28:52 -07:00
Scott Lahteine
d320065320 Within Marlin, maintain most feed rates in mm/s 2016-08-07 00:28:52 -07:00
Scott Lahteine
ed0b50ebee Merge pull request #4555 from thinkyhead/rc_mbl_index_rounding 
Remove premature int-cast from MBL cell index methods
 2016-08-06 23:34:01 -07:00
Scott Lahteine
bad286d52f Save CPU by multiplying by pre-compiled values 2016-08-06 23:24:07 -07:00
Scott Lahteine
dce6026e0e Remove premature cast to int 2016-08-06 23:01:29 -07:00
Scott Lahteine
cffe77c537 Merge pull request #4553 from thinkyhead/rc_lcd_chars_save_ram 
Save bytes for custom chars (Hitachi LCD)
 2016-08-06 18:29:16 -07:00
Scott Lahteine
42927530fe Explicitly clear the screen in lcd_goto_screen 2016-08-06 18:10:39 -07:00
Scott Lahteine
a6d2c2479f Minor cleanup of lcd_goto_screen calls 2016-08-06 18:10:39 -07:00
Scott Lahteine
e47c8b9829 Save bytes for custom chars (Hitachi LCD) 2016-08-06 18:10:39 -07:00
Scott Lahteine
0ff5005c9b Allow connector flexibility for BQ ZUM Mega 2016-08-06 17:19:12 -07:00
Scott Lahteine
98437bd488 Allow override of CONTROLLERFAN_PIN with RAMPS EFF 2016-08-06 17:19:12 -07:00
Scott Lahteine
93eafa1785 Use DISABLED to check TEENSY pin option 2016-08-06 17:19:12 -07:00
AnHardt
98392abb78 Clean warnings for pins_BQ_ZUM_MEGA_3D.h 2016-08-06 17:19:12 -07:00
AnHardt
98e96feee9 Repair SPI-pins 
SCK_PIN can't be defined as DIO[number] they mus be defined as pure number.
So rebuilding the structure of fastio.h in pins.h.
 2016-08-06 17:19:11 -07:00
Scott Lahteine
a00783c41f Format probe stowed test code 2016-08-06 14:31:07 -07:00
AnHardt
f37e8a31d7 Make Allen Key Probe stow 
by switching off the tests for the probe before the stow move.
 2016-08-06 14:30:38 -07:00
Scott Lahteine
5347f39fce Merge pull request #4542 from AnHardt/rep-de 
Repair-language.de
 2016-08-05 23:50:35 -07:00
Scott Lahteine
5ef4a5577c Merge pull request #4537 from thinkyhead/rc_fix_some_flaws 
Patch up some flaws here and there
 2016-08-05 23:49:57 -07:00
AnHardt
0d3b67a580 Repair-language.de 2016-08-06 01:00:40 +02:00
Scott Lahteine
938e6d15c4 Patch up some flaws, here and there 2016-08-05 08:17:37 -07:00
Scott Lahteine
3a3984e67a Merge pull request #4535 from thinkyhead/rc_old_symbols_first 
Move tests for old symbols to the top of sanity check
 2016-08-04 21:24:02 -07:00
Scott Lahteine
d7b882e430 Move tests for old symbols to the top of sanity check 2016-08-04 21:03:55 -07:00
Scott Lahteine
479107d04f Merge pull request #4530 from Kaibob2/patch-1 
Added / Update language_de.h
 2016-08-04 16:58:50 -07:00
Kaibob2
1abd7fa670 Update language_de.h 
Added german translation for MSG_INFO_PRINT_LONGEST and  MSG_INFO_PRINT_FILAMENT.
MSG_HEATING_COMPLETE changed from "Aufgeheizt" to "Extr. aufgeheizt"
MSG_HEATING changed from "Aufheizen" to "Extr. aufheizen"
 2016-08-04 09:40:38 +02:00
Scott Lahteine
7e2bd9a233 Z_RAISE_PROBE_* => Z_PROBE_*_HEIGHT 2016-08-03 21:18:38 -07:00
Scott Lahteine
445458c221 Don't include zprobe_zoffset in do_probe_raise 2016-08-03 21:12:02 -07:00
Rafa Couto
0114676953 Update of Galician language 2016-08-03 2016-08-03 15:00:18 +02:00
Scott Lahteine
bd7a96ed42 Merge pull request #4517 from thinkyhead/rc_min_probe_pin 
Define Z_MIN_PROBE_PIN always, allowing override
 2016-08-02 21:35:59 -07:00
Scott Lahteine
704ae1b737 Merge pull request #4516 from thinkyhead/rc_short_prints_quiet 
Only report finished prints longer than 1 min
 2016-08-02 21:14:30 -07:00
Scott Lahteine
7ed70305df Merge pull request #4515 from thinkyhead/rc_fix_speaker_tone 
Prevent the 'tone(f,d)' function from being interrupted
 2016-08-02 21:13:47 -07:00
Scott Lahteine
f1be87a85c Move probe pin sanity checks out of ABL block 2016-08-02 20:55:17 -07:00
Scott Lahteine
9cb596e88c Define Z_MIN_PROBE_PIN always, allowing override 2016-08-02 20:31:44 -07:00
Scott Lahteine
229f70f194 Only report finished prints longer than 1 min 2016-08-02 19:58:12 -07:00
Scott Lahteine
e040e00ae9 Merge pull request #4514 from thinkyhead/rc_cleanup_circularqueue 
Patch up CircularQueue
 2016-08-02 19:42:38 -07:00
Scott Lahteine
6110d57c16 Prevent the 'tone(f,d)' function from being interrupted 2016-08-02 19:37:47 -07:00
Scott Lahteine
b73203a0b7 Move some includes around to uncover missing deps 2016-08-02 19:37:46 -07:00
Scott Lahteine
f26d5425bf Patch up CircularQueue 
- Use `size` and `count` instead of `length` and `size`
- Fix bug: `peek` should return the item
- Clean up comments, spacing, spelling
 2016-08-02 18:57:15 -07:00
Scott Lahteine
c9123adc59 Improved SCREEN / MENU macros 2016-08-02 18:05:34 -07:00
Scott Lahteine
cebeb48005 Merge pull request #4511 from thinkyhead/rc_encoder_flex 
Allow encoder pulse/step override for more LCDs
 2016-08-02 16:50:50 -07:00
Scott Lahteine
3cccaa9885 Allow encoder pulse/step override for more LCDs 2016-08-02 15:57:26 -07:00
Scott Lahteine
14c5a46ee9 Use multiplication for MMM_SCALED 2016-08-02 15:05:17 -07:00
Scott Lahteine
d8945e8464 Fix Z_HEAD index for COREYZ 2016-08-02 15:05:17 -07:00
Scott Lahteine
0f030aface Merge pull request #4503 from AnHardt/fix-retract 
Correct typo in retract()
 2016-08-02 15:04:55 -07:00
Scott Lahteine
fbd8f06951 Merge pull request #4506 from thinkyhead/rc_buzzer_needs_beeper 
Buzzer requires BEEPER_PIN
 2016-08-02 14:40:43 -07:00
Scott Lahteine
330f82971b Buzzer requires BEEPER_PIN 2016-08-02 14:05:37 -07:00
Scott Lahteine
e0d7b8bf27 Fix Azteeg X3 servo pin / Viki i2c 2016-08-02 14:05:37 -07:00
Scott Lahteine
7cceb15925 Merge pull request #4505 from thinkyhead/rc_auto_select_dplugs 
Auto-select power plugs for RAMPS derivatives
 2016-08-02 12:56:52 -07:00
Scott Lahteine
593b37519a Boards with 4 power outputs are EFBF or EFBE 2016-08-02 12:34:28 -07:00
AnHardt
9ab94bd2c1 fix-babysrepping 2016-08-02 21:06:42 +02:00
AnHardt
39c4603598 Correct typo in retract. 2016-08-02 21:06:08 +02:00
Scott Lahteine
cebd2bfff0 Auto-select power plugs for RAMPS derivatives 2016-08-02 11:59:25 -07:00
Scott Lahteine
34c60f1b55 Merge pull request #4491 from thinkyhead/rc_fix_lcd_move_e 
Use a default argument in _lcd_move_e
 2016-08-01 16:45:25 -07:00
Scott Lahteine
38af251b91 Use a default argument in _lcd_move_e 2016-08-01 16:09:26 -07:00
Scott Lahteine
374ae6c099 Fix pins for RAMBO plus VIKI 2016-08-01 16:09:26 -07:00
Scott Lahteine
7594138740 Merge pull request #4493 from jbrazio/buildroot-cleanup 
Move font folder
 2016-08-01 15:57:23 -07:00
Scott Lahteine
6eed37aafb Merge pull request #4486 from thinkyhead/rc_pid_add_extrusion_rate_off 
PID_EXTRUSION_SCALING, disabled by default
 2016-07-31 18:23:51 -07:00
Scott Lahteine
4bf3526d00 Merge pull request #4463 from thinkyhead/rc_azteeg_x3_eeb 
Wrangle RAMPS variants and derivatives
 2016-07-31 18:22:49 -07:00
Scott Lahteine
1993c45759 Merge pull request #4487 from thinkyhead/rc_refresh_pos_fix 
Update refresh_positioning - no need for obj ref
 2016-07-31 18:22:38 -07:00
Scott Lahteine
f83369b79c Update refresh_positioning - no need for obj ref 2016-07-31 18:01:13 -07:00
Scott Lahteine
63fd1f49a6 PID_EXTRUSION_SCALING, disabled by default 2016-07-31 17:49:34 -07:00
Scott Lahteine
49997e2e22 HI_VOLT_PIN => "RAMPS_Dn_PIN" 2016-07-31 15:42:52 -07:00
AnHardt
60ad365e21 repair-software-spi 2016-07-31 15:50:42 +02:00
Scott Lahteine
f388beafa1 Merge pull request #4476 from otvald/RCBugFix 
FIX for endstop adjustemt on delta is offset
 2016-07-31 01:09:54 -07:00
Scott Lahteine
3633d4978b Merge pull request #4475 from esenapaj/Fix-for-PR-#4452 
Fix for PR #4452 (Additional heater-state output changes)
 2016-07-31 01:08:27 -07:00
Thomas Otvald Jensen
fe059f1221 During homing, line_to_axis_pos will make a path which moves across the 
endstop trigger point. The move is stopped at endstop, so current_position
should also be adjusted to reflect this!

Caused error in subsequent call in endstop adjustment, since the movement
would assume a wrong starting position.
 2016-07-30 16:50:31 +02:00
esenapaj
bd73e6d3c8 Fix for PR #4452 (Additional heater-state output changes) 
・Add missing ';'
 2016-07-30 22:49:30 +09:00
esenapaj
cd5b03d88f Update distribution date and readme 2016-07-30 21:27:29 +09:00
Scott Lahteine
f575e92f2e Merge pull request #4473 from esenapaj/Follow-up-the-PR-#4408-etc 
Follow-up the PR #4408 (Add support for reprapworld LCD), etc
 2016-07-30 04:45:27 -07:00
esenapaj
657ef8aded Follow-up the PR #4408 (Add support for reprapworld LCD), etc 
・Put #define REPRAPWORLD_GRAPHICAL_LCD into all the example
configuration files
・Adjust spacing
 2016-07-30 20:32:57 +09:00
Scott Lahteine
83d341c394 Make Conditionals.h a catch-all for old configs 2016-07-30 04:25:30 -07:00
Scott Lahteine
de951c64f1 Make pins for EFF a consistent order 2016-07-30 04:17:21 -07:00
Scott Lahteine
49f75b7891 pins_RAMPS_14.h => pins_RAMPS.h 2016-07-30 04:17:21 -07:00
Scott Lahteine
d3b713cebc Set flags for RAMPS "type" in pins.h 2016-07-30 04:17:21 -07:00
Scott Lahteine
223b7e473f RAMPS assignment for derivatives 2016-07-30 04:17:21 -07:00
Scott Lahteine
3865843283 Consolidate setting of RAMPS High Voltage PWM outputs 2016-07-30 04:17:21 -07:00
Scott Lahteine
bdac2eb13a Don't set non-existent SLED_PIN 2016-07-30 04:17:21 -07:00
Scott Lahteine
bfbd01e29a Merge pull request #4470 from thinkyhead/rc_fix_manual_move 
Followup to #4468
 2016-07-30 04:17:05 -07:00
Scott Lahteine
802d873fc1 Merge pull request #4469 from esenapaj/Fix-for-PR-#4453 
Fix for PR #4453 (Improved MANUAL_[XYZ]_HOME_POS)
 2016-07-30 04:08:54 -07:00
Scott Lahteine
8e2f095dde Merge pull request #4456 from jbrazio/speaker-type3 
Improvement to non-blocking speaker
 2016-07-30 04:07:08 -07:00
Scott Lahteine
ad68b4cb8b Followup to #4468 2016-07-30 03:49:42 -07:00
esenapaj
b8c112c490 Fix for PR #4453 (Improved MANUAL_[XYZ]_HOME_POS) 2016-07-30 19:37:43 +09:00
Scott Lahteine
2f76138645 Merge pull request #4468 from thinkyhead/rc_fix_manual_move 
Specify manual-movable E axes by extruder type
 2016-07-30 03:21:43 -07:00
Scott Lahteine
696b63e300 Specify manual-movable E axes by extruder type 2016-07-30 00:36:48 -07:00
Scott Lahteine
46c33f1cfa Merge pull request #4467 from jbrazio/safe_delay-millis_t 
Makes safe_delay() to be fully compatible with delay()
 2016-07-29 20:23:44 -07:00
Scott Lahteine
9e21b2e51d Merge pull request #4455 from AnHardt/double-bump-feature 
double bump probing as a feature
 2016-07-29 20:00:10 -07:00
Scott Lahteine
db4d03bc81 Merge pull request #4452 from thinkyhead/rc_fix_heaterstates_part_2 
Additional heater-state output changes
 2016-07-29 19:58:00 -07:00
Scott Lahteine
c68ca95345 Merge pull request #4464 from thinkyhead/rc_fix_steps_per_mm_handling 
Account for DELTA in Planner::refresh_positioning
 2016-07-29 19:34:59 -07:00
João Brázio
226e74a438 Fixes safe_delay() to be fully compatible with delay() 2016-07-30 02:56:26 +01:00
João Brázio
8e79e8cdb3 Adds types.h 2016-07-30 02:55:52 +01:00
Scott Lahteine
844a4e799e Account for DELTA in Planner::refresh_positioning 2016-07-29 18:41:11 -07:00
AnHardt
7188ce0ad6 double bump probing as a feature 
Why double touch probing is not a good thing.

It's widely believed we can get better __probing__ results when using a double touch when probing.

Let's compare to double touch __homing__.
Or better let's begin with single touch __homing__.
We home to find out out position, so our position is unknown.
To find the endstop we have to move into the direction of the endstop.
The maximum way we have to move is a bit longer than the axis length.
When we arrive at the endstop - when it triggers, the stepper pulses are stopped immediately.
It's a sudden stop. No smooth deacceleration is possible.
Depending on the speed and the moving mass we lose steps here.
Only if we approached slow enough (below jerk speed?) we will not lose steps.

Moving a complete axis length, that slow, takes for ever.
To speed up homing, we now make the first approach faster, get a guess about our position,
back up a bit and make a second slower approach to get a exact result without losing steps.

What we do in double touch probing is the same. But the difference here is:
a. we already know where we are
b. if the first approach is to fast we will lose steps here to.
But this time there is no second approach to set the position to 0. We are measuring only.
The lost steps are permanent until we home the next time.

So if you experienced permanently rising values in M48 you now know why. (Too fast, suddenly stopped, first approach)

What can we do to improve probing?
We can use the information about our current position.
We can make a really fast, but deaccelerated, move to a place we know it is a bit before the trigger point.
And then move the rest of the way really slow.
 2016-07-30 03:00:49 +02:00
Scott Lahteine
c31f56a38c Deprecate EXTRUDER_WATTS and BED_WATTS 2016-07-29 17:34:14 -07:00