Serhiy-K
27bdf4b24e
MarlinUI for SPI/I2C TFT-GLCD character-based display bridge ( #19375 )
2020-09-28 01:52:38 -05:00
Emperor
00c09e95ac
Thermistor: Kis3d Silicone heater + precision cast plate ( #19528 )
2020-09-27 21:38:30 -05:00
Scott Lahteine
dd118e2f36
Drop extra Bed PID
2020-09-27 16:55:57 -05:00
Jason Smith
da6c8317a7
Fix and improve STM32F1 serial ( #19464 )
2020-09-24 20:28:48 -05:00
Jason Smith
9d5a9621de
Demo and test multiple PID defaults ( #19413 )
2020-09-17 03:06:01 -05:00
Victor Sokolov
e97e6865c3
MarkForged kinematics ( #19235 )
2020-09-03 20:12:53 -05:00
Zachary Annand
97ec6c1be6
Independent Neopixel option ( #19115 )
2020-08-27 14:18:16 -05:00
Scott Lahteine
a96c5209d1
Fix small typø
2020-08-27 14:01:36 -05:00
Scott Lahteine
4955aa5b78
Prusa => Průša
2020-08-26 02:15:50 -05:00
Scott Lahteine
c488070859
Minor cleanup w/r/t LEDs
2020-08-23 23:57:51 -05:00
Scott Lahteine
638f6f0f06
Neopixel => NeoPixel
2020-08-23 03:14:11 -05:00
Mathew Winters
ca105493aa
NOZZLE_CLEAN_NO_Y ( #18870 )
2020-08-22 16:20:37 -05:00
qwewer0
434e43cc42
Change XY_PROBE_SPEED format to (x*60) ( #18997 )
2020-08-22 02:04:28 -05:00
Giuliano Zaro
8652a7bdd2
HIGH/LOW naming of pin state settings ( #19089 )
2020-08-21 23:13:43 -05:00
Keith Bennett
7e65464dd7
Fix M512 comment ( #19108 )
2020-08-21 17:04:32 -05:00
Scott Lahteine
38cd7b9938
Config adjustments
2020-08-19 22:42:54 -05:00
Giuliano Zaro
3426c7fc94
Configurable number of M106 fans ( #18883 )
2020-08-19 20:11:20 -05:00
Steven Haigh
a62ae2aa2d
Default Filament Runout Sensor enabled state ( #19013 )
2020-08-19 18:58:18 -05:00
ellensp
5038cddfd5
Add option to arrange Neopixel sets in series ( #18992 )
2020-08-14 08:25:45 -05:00
sherwin-dc
852e5ae042
Password via G-code and MarlinUI ( #18399 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-08-08 20:00:42 -05:00
wmariz
da4eaebdc9
ZoneStar Z6FB ( #18918 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-08-07 17:03:59 -05:00
Marco Burato
6bcfb58cd4
More Anycubic + Trigorilla mappings, ExtUI ( #18903 )
2020-08-06 05:38:18 -05:00
swissnorp
4856ac5028
Add Z_AFTER_DEACTIVATE to account for gravity ( #18906 )
2020-08-04 00:31:45 -05:00
Scott Lahteine
90158f9f67
Repair config order
2020-07-30 02:27:52 -05:00
Alexander Gavrilenko
117df87d19
Support for TFT & Touch Screens ( #18130 )
2020-07-30 01:43:19 -05:00
Victor Oliveira
38ce5966e1
SPI Emulated DOGM (like FSMC_GRAPHICAL_TFT, but SPI) ( #18817 )
2020-07-29 21:25:07 -05:00
Scott Lahteine
5eae8e7830
Update keypad link
2020-07-29 15:44:05 -05:00
Giuliano Zaro
05d95171cc
Clarify Nozzle-to-Probe offset ( #18828 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-07-29 14:35:31 -05:00
Scott Lahteine
de68b3753f
Config for Anycubic Mega TFT
2020-07-26 19:50:43 -05:00
ellensp
b9f0c06d83
Add 0 to EXTRUDERS :[json] ( #18786 )
2020-07-26 15:41:50 -05:00
Scott Lahteine
bc688f27dc
Clean up after changes
2020-07-25 01:53:07 -05:00
MKS-Sean
d20d459132
Robin nano V2, TFT LVGL UI parameters, and more ( #18500 )
2020-07-25 01:18:06 -05:00
Scott Lahteine
d1e20eb29f
Update links, README, contributing, etc.
2020-07-23 20:46:51 -05:00
Diego von Deschwanden
42fbd527f3
Fix links to secure sites ( #18745 )
2020-07-22 22:20:14 -05:00
InsanityAutomation
b4b19aef7f
Custom Nozzle Wipe ( #18736 )
2020-07-22 01:42:44 -05:00
Speaka
2c238e4fc2
Option for extra endstop check ( #18424 )
2020-07-12 13:16:56 -05:00
Scott Lahteine
b6051efe5b
Capitalize "G-code"
2020-07-10 01:35:37 -05:00
Giuliano Zaro
95c2cc3966
Remove outdated comment ( #18597 )
2020-07-09 01:43:59 -05:00
Scott Lahteine
8a55f9405c
Fix some comments
2020-07-08 06:53:03 -05:00
Robby Candra
c02451b602
Filament Runout Inverting => State ( #18537 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-07-05 17:42:19 -05:00
George Fu
097347b575
Add FYSETC 2.42 inch OLED support ( #18485 )
2020-07-02 20:33:52 -05:00
Victor Oliveira
e5bc9d31cc
Add TFT_LVGL_UI support ( #18438 )
2020-07-01 01:30:24 -05:00
Scott Lahteine
59e4de8a55
Add Romanian language ( #18455 )
...
Co-authored-by: cristyanul <47246451+cristyanul@users.noreply.github.com>
2020-06-27 22:59:44 -05:00
InsanityAutomation
3b80690a71
ExtUI additions ( #18447 )
...
Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
2020-06-27 22:02:28 -05:00
Scott Lahteine
2139141f99
Graphical LCD note
2020-06-23 16:13:21 -05:00
Scott Lahteine
caeba33d28
Sensor 502 and PTC cleanup
2020-06-16 14:08:51 -05:00
thisiskeithb
2603a237f9
Add MKS LCD12864 A/B Controller Support ( #18120 )
2020-06-16 02:43:09 -05:00
Scott Lahteine
f4c258dc23
Creality Ender 3 v2 ( #17719 )
2020-06-16 01:45:27 -05:00
makerbase
642112d3eb
Add MKS UI (TFT_LITTLE_VGL_UI) ( #18071 )
2020-06-15 21:05:33 -05:00
XDA-Bam
a4b46eaf8f
Add JD_HANDLE_SMALL_SEGMENTS option ( #18316 )
2020-06-15 18:54:00 -05:00
Scott Lahteine
75119c433a
Default filament 1.75mm
2020-06-09 23:20:20 -05:00
ellensp
ce62209bce
Probe margin. Bump config version ( #18140 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-06-02 20:41:50 -05:00
Scott Lahteine
bce9527709
Whitespace
2020-05-19 01:32:56 -05:00
Jason Smith
94063e3a87
Fix PID + Thermal Protection combos ( #18023 )
2020-05-18 13:51:32 -05:00
Scott Lahteine
e6079bd14e
Correct endstop noise comment
2020-05-11 20:16:48 -05:00
George Fu
34a2fd7b09
DGUS minor fixups ( #17901 )
2020-05-08 01:24:27 -05:00
Axel
7613383e7b
Add Rostock 301 thermistors (22, 23) ( #17806 )
2020-05-02 18:45:54 -05:00
Stephan
e7a6a52eda
Use center defines for Z Safe Homing XY ( #17782 )
2020-04-28 18:12:56 -05:00
studiodyne
89b17b5463
Followup fixes for singlenozzle, etc. ( #17712 )
2020-04-28 00:21:23 -05:00
studiodyne
58ac9f257c
NOZZLE_PARK_FEATURE - X/Y only axis move ( #17697 )
2020-04-25 10:42:34 -05:00
Ondřej Nový
d2a5d51f69
Add NOZZLE_PARK_Z_RAISE_MIN ( #17624 )
2020-04-24 22:39:08 -05:00
Scott Lahteine
e11a806460
Revert config replace
2020-04-23 22:36:05 -05:00
Scott Lahteine
55d66fb897
Add HAS_JUNCTION_DEVIATION
2020-04-23 21:53:51 -05:00
Scott Lahteine
5d0deba938
Longer default power-up delay
...
See MarlinFirmware/Configurations#78
2020-04-20 00:12:22 -05:00
djessup
360e07c90f
Add USE_PROBE_FOR_Z_HOMING option ( #17359 )
2020-04-17 09:02:21 -05:00
Scott Lahteine
3fcb36d8dc
M200/M300 LCD comment
2020-04-17 03:44:50 -05:00
Zs.Antal
78a5079558
Add Hungarian language ( #17491 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-04-16 04:11:42 -05:00
thisiskeithb
089a0af119
More info on E3D, Keenovo, and Wanhao thermistors ( #17561 )
2020-04-16 00:04:53 -05:00
Scott Lahteine
e3321920f3
Update Marlin website links to https
2020-04-12 17:21:14 -05:00
grauerfuchs
293a0997c9
Fix / optimize PCA9533 LED (Mightyboard) ( #17381 )
2020-04-08 12:53:28 -05:00
Scott Lahteine
f2ed18d150
M303 followup
...
- Put 'D' before other params for clean exit.
- Use serial on/off for debug status.
2020-03-25 15:08:52 -05:00
Roxy-3D
1986e1cdf8
Allow PID_DEBUG to be turned on and off ( #17284 )
...
M303 D will now toggle activation of PID_DEBUG output. This allows the debug capability to be built into the firmware, but turned on and off as needed.
2020-03-24 19:38:09 -05:00
Scott Lahteine
e7a9f17371
Tweak serial port descriptions
2020-03-21 23:38:44 -05:00
RasmusAaen
c768605bde
Add Copymaster3D board ( #17188 )
2020-03-17 15:25:10 -05:00
Scott Lahteine
090a90a036
Add EEPROM_BOOT_SILENT option
2020-03-14 19:24:35 -05:00
Scott Lahteine
8b2d55e345
Config version 020005
2020-03-13 23:22:46 -05:00
Scott Lahteine
0578e9b16e
Move SENSORLESS_PROBING to the probes section
...
Fixes a bug with HAS_BED_PROBE not being set before use.
2020-03-05 11:05:11 -06:00
Scott Lahteine
02cce7d4b4
Add TRAVEL_EXTRA_XYJERK option
...
See #16949
Co-Authored-By: josedpedroso <josedpedroso@users.noreply.github.com>
2020-02-26 06:43:07 -06:00
Scott Lahteine
71539bcbeb
Undo driver type auto-assignment for now
...
Good general concept but needs more time to develop and group with a stepper suite.
2020-02-11 02:32:01 -06:00
InsanityAutomation
cc1ff27256
Bump config version to 020004 ( #16816 )
2020-02-09 12:15:02 -06:00
Fabio Santos
894762259b
Coolstep for TMC2130, 2209, 5130, 5160 ( #16790 )
2020-02-08 21:01:57 -06:00
Tanguy Pruvot
54aff83179
G26: Allow to set retraction for UBL mesh test ( #16511 )
2020-02-05 20:33:39 -06:00
Scott Lahteine
bfad23d3e2
(c) 2020
2020-02-03 08:00:57 -06:00
Scott Lahteine
7f9c62437e
Corner Leveling: Add inset for each side ( #16759 )
2020-02-03 00:00:35 -06:00
Scott Lahteine
72b4d91d2e
Add Z_AFTER_HOMING to raise Z more in G28 ( #16755 )
2020-02-02 00:02:30 -06:00
Artur Petrzak
e4679c1b78
(21) PT100 for MCUs with 3.3v logic ( #16731 )
2020-01-30 18:00:37 -06:00
Bob Kuhn
0d166f9c7d
Duet Smart Effector support ( #16641 )
2020-01-25 02:00:51 -06:00
Scott Lahteine
86c18ea6e0
Bring configs and drivers.h up to date
2020-01-24 23:17:52 -06:00
InsanityAutomation
79810b7fcb
G12 defaults per tool. Event G-code for post-toolchange ( #16554 )
2020-01-21 02:51:23 -06:00
MaukCC
04d64351a2
Add HMS434 V15 ATSAM board ( #16620 )
2020-01-21 01:10:31 -06:00
InsanityAutomation
0fcf2b1110
Quad Z stepper support ( #16277 )
2020-01-19 23:35:07 -06:00
tompe-proj
a338dce83f
PINDA v2 temperature sensor / compensation ( #16293 )
2020-01-17 17:16:45 -06:00
George Fu
4108c5d01f
Update FYSETC S6 pins ( #16559 )
2020-01-17 13:16:05 -06:00
Scott Lahteine
ea7363a8f4
Update more configs
2020-01-14 18:48:29 -06:00
Bob Kuhn
1ad53cee1f
Improved STMicro L64XX stepper driver support ( #16452 )
2020-01-13 18:47:30 -06:00
George Fu
e593da1c23
Update and fix DGUS ( #16317 )
2020-01-03 21:00:44 -06:00
greppp
7f87a044cd
Fix Ender-2 display pins, add BTN_ENC ( #16349 )
2020-01-03 20:44:16 -06:00
Scott Lahteine
00c83e9ca6
Update comments re: NOZZLE_AS_PROBE
2020-01-01 19:41:23 -06:00
InsanityAutomation
1c9ccce520
Add NOZZLE_AS_PROBE (no probe offsets) ( #15929 )
2019-12-24 00:03:08 -06:00
Scott Lahteine
af4c62b422
Update product links
2019-12-15 20:58:31 -06:00
Luu Lac
f3155af444
Update AZSMZ LCD link ( #16106 )
2019-12-06 01:35:06 -06:00
Felicia Hummel
690ed531b6
Configurable PSU power-on delay ( #16050 )
2019-11-30 07:17:24 -06:00
Scott Lahteine
441e822fb3
LULZBOT_TOUCH_UI => TOUCH_UI_FTDI_EVE
2019-11-23 17:04:17 -06:00
Scott Lahteine
bdd366b97c
Update sensor -5 label
2019-11-21 04:57:57 -06:00
Bob
751cd1f533
MAX31865 temperature sensor ( #15930 )
2019-11-21 03:15:10 -06:00
Scott Lahteine
47e4e5f1db
Update thermocouple comments
2019-11-20 23:51:51 -06:00
Scott Lahteine
7e9c846ec3
Modify comment for unlimited E steppers
2019-11-13 01:45:50 -06:00
InsanityAutomation
0074d63962
Vendor version override ( #14189 )
...
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
2019-10-15 12:32:44 -05:00
Matthew Piercey
ac8083588b
Add config for Wanhao Duplicator i3 v2.1
2019-10-11 00:59:58 -05:00
Roxy-3D
2cf35267c4
Set Junction Deviation value from Jerk and Default Acceleration ( #15509 )
...
Formula: `0.4 * sq(min(xjerk, yjerk)) / (default accel)`
2019-10-10 19:44:15 -05:00
Scott Lahteine
b4d48fdc91
Followup to #15481
2019-10-08 21:38:02 -05:00
Scott Lahteine
89490171ef
Use "concatenatable" language codes
2019-10-08 20:17:23 -05:00
Scott Lahteine
c0005e939c
Enable junction deviation by default ( #15481 )
2019-10-08 19:42:18 -05:00
InsanityAutomation
438835f6a5
Configurable Max Accel, Max Feedrate, Max Jerk edit limits ( #13929 )
2019-10-01 19:59:48 -05:00
InsanityAutomation
e9cf46a9a5
M851 XY 3 point followup (incomplete) ( #15361 )
2019-09-25 02:43:41 -05:00
InsanityAutomation
df1e51258a
Add M851 X Y probe offsets ( #15202 )
2019-09-24 21:29:21 -05:00
Tanguy Pruvot
d277e93f4d
Configurable TOUCH_BUTTONS repeat delays ( #15245 )
2019-09-16 21:32:55 -05:00
Scott Lahteine
3648bce886
Tweak NOZZLE_CLEAN_START_POINT spacing
2019-09-11 01:50:24 -05:00
Scott Lahteine
cff502c6d4
Tweak REPRAPWORLD_KEYPAD config comment
2019-09-04 17:23:38 -05:00
Scott Lahteine
87b16ed5f6
Bring Configuration.h up to date
2019-08-31 07:03:51 -05:00
Robby Candra
38983fdfa9
Add 'Back' Button for Touch TFT 320x240 ( #15060 )
2019-08-29 01:19:07 -05:00
Scott Lahteine
3ac76f0489
Invariant Marlin bootscreen ( #15057 )
2019-08-28 07:40:18 -05:00
Scott Lahteine
d6a16525c2
New Language: Vietnamese ( #13892 )
2019-08-24 03:40:28 -05:00
MaukCC
8664b8e97b
Adding HMS434 machine ( #14931 )
2019-08-20 03:40:48 -05:00
Scott Lahteine
bc93ac53b5
Fix #define typo in configs
2019-08-18 19:51:55 -05:00
Marcio Teixeira
274934ad81
Add LULZBOT_TOUCH_UI ( #14967 )
2019-08-16 18:34:13 -05:00
Tim Moore
e3660bca25
Overlord printer thermistor ( #14815 )
2019-08-03 20:57:56 -05:00
Scott Lahteine
e85eca2630
HAL cleanup, Teensy 3.1 platform
2019-08-02 07:22:26 -05:00
Tim Moore
940c59d9da
Overlord i2c LCD with LEDs and buzzer ( #14801 )
2019-08-02 06:19:45 -05:00
Robby Candra
128eed6b57
Option to reverse select direction/buttons ( #14693 )
2019-07-30 17:42:57 -05:00
Scott Lahteine
bc58e678bd
More general FSMC display option
2019-07-30 04:25:55 -05:00
Scott Lahteine
c942ca130f
More general TOUCH_BUTTONS comment
2019-07-30 04:22:27 -05:00
mikeshub
1579091c20
PID loop improvements ( #14746 )
...
* Fix macro evaluation in `temperature.cpp`
* Improve bed PID, PID debug output
* Add min PID power define
2019-07-28 15:50:25 -05:00
Tim Moore
e5aa453293
Add support for 2 Neopixel strips ( #14667 )
2019-07-20 23:14:09 -05:00
wookie666
00e2f6da8f
Improve magnetic dock switching toolhead ( #14663 )
2019-07-19 06:07:26 -05:00
Tanguy Pruvot
81d629bc47
Robin & Longer3D SPI TFT driver ( #14595 )
2019-07-14 18:16:26 -05:00
InsanityAutomation
d2f20803ba
Allow nozzle clean with limited Axis ( #14619 )
2019-07-14 06:58:53 -05:00
Scott Lahteine
3218c4b33f
Shorten some config descriptions
2019-07-11 05:45:27 -05:00
Scott Lahteine
84d0bc5c17
OLED LCD section
2019-07-08 23:58:04 -05:00
Vanessa Dannenberg
4fa8053638
RPW-Ultra thermistor table ( #14517 )
2019-07-05 20:37:05 -05:00
Tim Moore
eb6dec03bd
Simplify power supply naming logic ( #14488 )
...
Co-Authored-By: Tim Moore <tim.moore@lightbend.com>
Co-Authored-By: AnHardt <github@kitelab.de>
2019-07-05 01:58:34 -05:00
Aliaksei Kvitsinski
2f932a11b3
Park heads with electromagnet ( #14023 )
2019-07-01 05:55:23 -05:00
thisiskeithb
4b9f6d531b
Add links to Junction Deviation heading ( #14272 )
2019-07-01 01:17:53 -05:00
Tanguy Pruvot
24655a6bf3
Touch-MI Menu and Manual Deploy option ( #14290 )
2019-06-30 23:55:27 -05:00
Scott Lahteine
93cd66ac11
Tweaky change from (C) to (c)
2019-06-27 23:58:16 -05:00
Tim Moore
8ce84fa44f
Add temperature-based auto power options ( #14397 )
2019-06-27 16:28:07 -05:00
MrMabulous
c41b005f33
Add Extra Probing option, discarding outliers ( #14338 )
2019-06-21 19:02:26 -05:00
Tobias Frost
eeaef2410a
Support DGUS Display with DWIN OS ( #13253 )
2019-06-21 04:47:23 -05:00
Scott Lahteine
a31cb910f5
Tweak some config spacing
2019-06-20 21:08:47 -05:00
Scott Lahteine
4df4c47994
Add TMC2209 support ( #14249 )
2019-06-20 15:47:50 -05:00
