Commit Graph

11590 Commits

Author SHA1 Message Date
Bob
5a98c83eef Use MAX6675 SPI pins for MAX31865 over SPI pins (#16024) 2019-11-27 01:45:03 -06:00
Jason Smith
752a1e76ab Float ABL mesh boundaries, no probe position rounding (#16018) 2019-11-27 01:29:25 -06:00
Jason Smith
ce9a4afe95 Better ST7920 timings for FYSETC S6 (#16022) 2019-11-27 01:26:21 -06:00
Scott Lahteine
289c5dcccb Fix boot screen sanity check 2019-11-27 01:10:23 -06:00
Scott Lahteine
98f83dc756 Add comments to G29 2019-11-27 01:05:22 -06:00
Dirk O. Kaar
0550f30790 Renkforce configuration updates (#16017) 2019-11-26 20:22:17 -06:00
Scott Lahteine
077eeaa0f4
Fix mixing extruder feedrate (#15905) 2019-11-26 18:03:59 -06:00
Vertabreaker
12417d087b E2 pins for GT 2560 v3 (#16016) 2019-11-26 17:43:27 -06:00
timeburn
a5a143f944 Include host_actions.h in G34 (#16014) 2019-11-26 16:38:41 -06:00
George Fu
cf1e19d167 Fysetc S6 support (#15850) 2019-11-26 16:15:03 -06:00
Dirk O. Kaar
1cea1687f3 Renkforce RF100 (V1), V2, XL, and XL Plus (#15695) 2019-11-26 14:06:23 -06:00
thisiskeithb
f786cc5145 Revert default BTT STM32F103 environment (#16006) 2019-11-26 04:28:13 -06:00
madmattco
049e8d5963 Add VAKE / VAKE403D support (#15631) 2019-11-26 04:00:59 -06:00
Heilig Benedek
993802c404 Fix Ender 2 display SCK, BTN_ENC pins (#15997) 2019-11-26 03:48:21 -06:00
haschtl
ff6518c0a8 Add PID_FAN_SCALING option (#15585) 2019-11-26 03:34:43 -06:00
lukasmatena
8ccfdaca02 Add M220 B/R with PRUSA_MMU2 (#15739) 2019-11-26 03:34:18 -06:00
Chris Pepper
c1aac3a0c9 Fix delta_mm.e with zero extruders (#15996) 2019-11-26 02:58:17 -06:00
Marcio T
43d0391d82 Fix Touch UI message strings (#16004) 2019-11-26 02:56:25 -06:00
Robby Candra
fc9f8d27eb Fix Progress / Remaining display on DOGM (#16005) 2019-11-26 02:55:22 -06:00
Jason Smith
d0282e5ba8 Allow slop in position_is_reachable for delta (#16003) 2019-11-26 02:53:28 -06:00
Scott Lahteine
1d150e41b6 Reduce MMU2 code, add test 2019-11-26 02:15:31 -06:00
Robby Candra
55595d444d Use LCD_WIDTH for indexed string (#15979) 2019-11-24 19:06:23 -06:00
InsanityAutomation
2142beb2e5 Fix UI compile error in UBL (#15981) 2019-11-24 17:04:19 -06:00
Jason Smith
c497a491f4 Fix a PID_EXTRUSION_SCALING menu item (#15988) 2019-11-24 17:01:14 -06:00
Scott Lahteine
b11551c767
Touch UI updates for Cocoa Press (#15986) 2019-11-24 06:08:05 -06:00
Scott Lahteine
441e822fb3 LULZBOT_TOUCH_UI => TOUCH_UI_FTDI_EVE 2019-11-23 17:04:17 -06:00
Scott Lahteine
47c19aa2b3 Clean up probe accessors 2019-11-23 17:02:04 -06:00
pfillion42
4a5dee6356 (SKR 1.3) Assign DIAG pins for homing dir (#15972) 2019-11-23 16:20:13 -06:00
Denis Semenov
0fcd1f4a49 Fix HAS_CLASSIC_E_JERK and related issues (#15968) 2019-11-23 15:56:07 -06:00
Scott Lahteine
8f09d2e790 Add STM32F103RE_bigtree to Auto Build 2019-11-22 16:47:31 -06:00
Gustavo Alvarez
b2a275891c Support RET6 in BTT SKR Mini (#15957) 2019-11-21 05:09:01 -06:00
Scott Lahteine
bdd366b97c Update sensor -5 label 2019-11-21 04:57:57 -06:00
Jason Smith
b904ba0f29 Improve Delta probing / calibration (#15887) 2019-11-21 03:26:00 -06:00
Jason Smith
4ede13e36a Fix G29 for updated meshCount type (#15960) 2019-11-21 03:19:56 -06:00
Bob
751cd1f533 MAX31865 temperature sensor (#15930) 2019-11-21 03:15:10 -06:00
Scott Lahteine
47e4e5f1db Update thermocouple comments 2019-11-20 23:51:51 -06:00
Roman Moravčík
5681017d0c Update Slovak language (#15953) 2019-11-20 17:41:14 -06:00
BigTreeTech
ab8b24fdba Power Loss Recovery with a UPS (#15943) 2019-11-20 17:40:21 -06:00
Scott Lahteine
ab9f0f2c4f Followup to meshCount patch 2019-11-20 04:57:04 -06:00
InsanityAutomation
e81b946f06 Better singlenozzle stored fan speed menus (#15921) 2019-11-20 00:14:56 -06:00
Daniel Negut
a3229b30ec Add Zonestar/Anet LCD for SKR mini E3 (#15931) 2019-11-20 00:06:26 -06:00
InsanityAutomation
798f34abcd Float XY probe offset followup (probe edge) (#15928) 2019-11-19 23:29:52 -06:00
Giuliano Zaro
31e329f143 Update Italian language (#15925) 2019-11-19 23:27:53 -06:00
Jason Smith
9906e96ffb Allow UBL G29 J1 with PAUSE_BEFORE_DEPLOY_STOW (#15934) 2019-11-19 23:26:38 -06:00
Evgeny-SPB
7116a8645c G34 logic / typo fix (#15938) 2019-11-19 23:25:07 -06:00
Giuliano Zaro
aa89bb71f9 Fix MMU2 compile error (#15923) 2019-11-19 23:22:02 -06:00
TheAssassin
814d908a8a Ender-2 LCD on BTT SKR E3 (#15924) 2019-11-19 23:21:27 -06:00
InsanityAutomation
4d4e692c81 Match onMeshUpdate() index sign (#15920) 2019-11-19 23:16:43 -06:00
Luu Lac
4d9a5fef3b Update Vietnamese language (#15940) 2019-11-19 21:08:47 -06:00
Scott Lahteine
865055e07a [cron] Bump distribution date 2019-11-18 00:00:08 -06:00
Scott Lahteine
2bd6dc02d6 [cron] Bump distribution date 2019-11-17 00:00:06 -06:00
Robby Candra
40bbe58371 Use lcd_uint_t in lcd_put_u8str_ind_P (#15909) 2019-11-16 16:37:21 -06:00
Roxy-3D
f19fa64e98
Eliminate multiple settings to extruder_duplication_enabled in G28
If the IDEX mode was previously set (via GCode or the LCD Panel) to a duplication mode...   It was lost after a G28 due to this redundant setting of 'extruder_duplication_enabled'. 

It is very important to the various use cases of IDEX machines that extruder_duplication_enabled is preserved across a G28.   The reason is this allows a person to use the LCD Panel to put the machine into a duplication mode, and then send a 'normal' part file to the printer and get two parts out of the process.
2019-11-15 15:42:01 -06:00
thisiskeithb
0f57818f2d Support 512K "RCT6" in BTT SKR Mini (#15890) 2019-11-15 02:51:26 -06:00
Scott Lahteine
aa93e1f21a Update TMC_ADV examples 2019-11-15 02:15:10 -06:00
Scott Lahteine
27cb4db80e
Reduced string storage using tokens (#15593) 2019-11-14 20:30:30 -06:00
Lino Barreca
bd321d4b7c Don't compile STM32 SoftwareSerial unless STM32 (#15894) 2019-11-14 05:21:23 -06:00
Scott Lahteine
ac2d7ab14c Fix timers.h include 2019-11-14 04:47:53 -06:00
Scott Lahteine
a022defe06 [cron] Bump distribution date 2019-11-14 00:00:12 -06:00
Scott Lahteine
3f4636e916 "nozzle_to_probe_offset" is obsolete 2019-11-13 03:07:54 -06:00
Scott Lahteine
602ca5dea6 No USE_M73_REMAINING_TIME without LCD_SET_PROGRESS_MANUALLY 2019-11-13 02:07:17 -06:00
Robby Candra
fcfde7c2f5 Only assign CS/RX/TX on extra axes with SPI/UART (#15886) 2019-11-13 02:03:34 -06:00
Scott Lahteine
a4709ba765
Store unscaled PID values in EEPROM (#15884) 2019-11-13 01:47:46 -06:00
Scott Lahteine
7e9c846ec3 Modify comment for unlimited E steppers 2019-11-13 01:45:50 -06:00
Jason Smith
9fd35c84ce SoftwareSerialM for SKR STM32F1 boards (#15875) 2019-11-12 22:16:54 -06:00
Jamie
32028902c3 Use max feedrate for joystick motion (#15870) 2019-11-12 21:01:04 -06:00
Giuliano Zaro
bb93ea1be4 [SAMD51] Activate ADCs oversampled 12bits (#15874) 2019-11-12 20:59:17 -06:00
Roman Moravčík
e110f5abce M73 R : Set Remaining Time (#15549) 2019-11-12 19:36:54 -06:00
Lino Barreca
ac71cdc265 New HardwareTimer for STM32 5.7.0 (#15655) 2019-11-12 19:23:02 -06:00
Chris Pepper
4762dfe797
Fix lpc u8g i2c (#15876) 2019-11-12 01:59:36 +00:00
Chris Pepper
af61f37b65
Update lpc176x requirements (#15869) 2019-11-11 03:25:56 +00:00
ManuelMcLure
b9703fdf36 Ensure TMC + LIN_ADVANCE pulse length (#15807) 2019-11-10 19:04:28 -06:00
Scott Lahteine
5e5045c4ee Touch UI finishing touches 2019-11-10 18:52:53 -06:00
Marcio Teixeira
5639b8ca20 Touch UI fixes for Cocoa Press (#15847) 2019-11-10 18:49:41 -06:00
danym21
28e1614c2e Add Sensorless Homing current (#15690) 2019-11-10 18:45:06 -06:00
Chris Pepper
86d0bc1af5
Update lpc176x framework version requirement (#15868) 2019-11-10 23:30:28 +00:00
LinFor
48b7a1e66e Allow non-zero "fan off" PWM value (#15709) 2019-11-10 16:33:56 -06:00
Jason Smith
770adcfa15 Raise Z before homing X/Y on unknown Z (#15859) 2019-11-10 16:21:20 -06:00
Scott Lahteine
624336f453 Fix up Megatronics 3.2 test 2019-11-10 16:19:57 -06:00
ellensp
7b29c60c46 Fix compile with chamber enabled (#15862) 2019-11-10 16:15:08 -06:00
Scott Lahteine
534f2d69c1 [cron] Bump distribution date 2019-11-10 00:00:04 -06:00
Jademalo
37874a6472 Fix E0_SERIAL_RX_PIN typo (#15841) 2019-11-09 22:51:20 -06:00
Marcelo Cerri
b9d351899a Update SKR mini E3 1.2 Filament Runout pin (#15843) 2019-11-09 22:49:33 -06:00
Scott Lahteine
7010f92c4b Board-based LCD delays 2019-11-09 22:33:38 -06:00
Scott Lahteine
9ca25118d0 Whitespace cleanup 2019-11-09 21:17:52 -06:00
Jason Smith
b3f81eead5 Fix/improve TURBO_BACK_MENU_ITEM (#15856) 2019-11-09 19:27:30 -06:00
Scott Lahteine
776632c503
Add and apply REPEAT macro (#15829) 2019-11-09 17:59:04 -06:00
Scott Lahteine
8061836e74 Fix Lulzbot tag 30: "Heaters Off" 2019-11-08 03:57:34 -06:00
Scott Lahteine
249f600ceb [cron] Bump distribution date 2019-11-08 00:00:03 -06:00
Marvin Sinister
8d157a4520 Fix MKS MINI12864 on SKR 1.3 (#15836) 2019-11-07 19:39:08 -06:00
Luu Lac
ed6bbe012b Fix incomplete 'Homing XYZ' screen draw (#15830) 2019-11-07 19:14:02 -06:00
AnHardt
4db68d704f Update Display Throttling (#15837) 2019-11-07 19:04:19 -06:00
Scott Lahteine
bb5b1e19b0 Function-style stepper macros 2019-11-07 17:14:36 -06:00
thisiskeithb
47805e18f8 Makefile catch-up (#15823) 2019-11-07 02:14:40 -06:00
Scott Lahteine
0be9fdb455 Move single-use to lambdas 2019-11-07 00:28:33 -06:00
Scott Lahteine
84ce3a6bea LCD corner screen handler lambda 2019-11-07 00:24:16 -06:00
Scott Lahteine
711703dcd1 [cron] Bump distribution date 2019-11-07 00:00:06 -06:00
LinFor
a84e3d1b80 Use native ADC resolution where possible (#15719) 2019-11-06 17:49:17 -06:00
Miroslav Šustek
9201197878 Fix SKR E3 board BLTOUCH + SPEAKER timer conflict (#15781) 2019-11-06 17:34:29 -06:00
Jason Smith
814a2eaf8f Allow TMC baud rate override (#15773) 2019-11-06 17:08:12 -06:00