MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity
7,153 Commits 1 Branch 0 Tags 129 MiB
b904b5ae8d
Commit Graph

5909 Commits

Author SHA1 Message Date
Bob-the-Kuhn
685ed5393a Bug Fix: Switching extruder tool change leaves Z in wrong position 
The tool_change function saves the current_position to the destination
array soon after starting.  Later in the switching extruder section, the
destination array is modified when moving the Z axis up & down.  A later
section of tool_change moves the head back to the “original location”
using the destination array.  This later section assumes that the
destination array hasn’t been modified.

The fix is to save the destination Z position and then restore it after
the Z movements have completed.

Going back to using the current_position array for the switching
extruder Z axis moves (and  leaving the destination array untouched)
doesn’t fix the problem.

This bug was introduced by the “Make tool_change kinematic compatible”
commit # 847429eff4 which was merged on 10
Oct 2016 as part of PR 4982.

This bug was discovered in Issue 5966.
 2017-03-14 02:36:24 -05:00
Scott Lahteine
51353f8fea Merge pull request #6000 from trivalik/NoWorkspaceWarning 
prevent warning with define of NO_WORKSPACE_OFFSETS
 2017-03-12 00:00:51 -06:00
MagoKimbra
a4a9bd8bc9 Fix BUG set_position_mm 
Set postion must have axis and not E_AXIS + active_extruder.
 2017-03-11 14:13:39 +01:00
Trivalik
71ac6f9d42 prevent warning with define of NO_WORKSPACE_OFFSETS 2017-03-09 23:49:57 +01:00
Scott Lahteine
2defb1d748 Use SET_INPUT_PULLUP where appropriate 2017-03-07 23:43:33 -06:00
Scott Lahteine
58b3e98878 Use arrays for delta tower parameters 2017-03-07 19:00:22 -06:00
Scott Lahteine
47242a40bb Apply updated changes for delta_tower_angle_trim 2017-03-07 18:15:11 -06:00
Jimmy Envall
00b6b3da79 Added support for delta tower angle corrections. 2017-03-07 16:35:58 -06:00
Scott Lahteine
5a456c832a Apply TMC2130 to example configurations 2017-03-07 04:22:06 -06:00
Scott Lahteine
45f949d833 TMC2130 Library: @teemuatlut replaces @makertum 2017-03-07 04:22:06 -06:00
Scott Lahteine
33f8a8a344 Merge pull request #5973 from thinkyhead/rc_circle_pattern 
Add circle pattern to nozzle clean
 2017-03-06 04:47:01 -06:00
Scott Lahteine
94b3e0a483 Merge pull request #5959 from benlye/benlye-fixm48 
Remove extra carriage return in M48 V1 output
 2017-03-06 04:24:28 -06:00
Scott Lahteine
a9a1971295 Merge pull request #5972 from thinkyhead/rc_cooldown_before 
Fix preheat menu formatting
 2017-03-06 03:21:29 -06:00
Scott Lahteine
6aa81255a9 Patch and clean up "flsun" kossel. Followup to #5911. 2017-03-06 03:15:00 -06:00
Scott Lahteine
b2270b3f3e Apply prior nozzle clean update 2017-03-06 03:14:59 -06:00
Marek Pikuła
7698c5617a Added circle nozzle cleaning parameters to example configurations 2017-03-06 03:04:58 -06:00
Marek Pikuła
6836b94eea Added circle pattern for nozzle cleaning feature 2017-03-06 03:03:00 -06:00
Scott Lahteine
3b75518ef6 Merge pull request #5911 from aphex3k/flsun_kossel_mini 
Configuration.h and Configuration_adv.h for the kossel mini by flsun
 2017-03-06 02:26:01 -06:00
Scott Lahteine
3830778852 Apply NO_WORKSPACE_OFFSETS to lcd menu 2017-03-06 02:21:42 -06:00
Scott Lahteine
7e3aab889d Fix preheat menu formatting 2017-03-06 02:07:07 -06:00
Scott Lahteine
fea0d3f20f Endstop and temp-isr general cleanup 2017-03-06 02:07:07 -06:00
Scott Lahteine
aef08e8780 Compact some macro substitutions 2017-03-06 02:07:07 -06:00
Scott Lahteine
2f620f86d9 Merge pull request #5970 from thinkyhead/rc_cooldown_before 
Preheat Hotend Only menu items
 2017-03-06 01:56:05 -06:00
Scott Lahteine
02de8e6f18 Merge pull request #5957 from MagoKimbra/rc_stepper_indirection_fix 
Stepper indirection fix tmc driver
 2017-03-06 01:16:40 -06:00
Scott Lahteine
6c5312559c Menu item to preheat only the hotend 2017-03-06 01:14:54 -06:00
Scott Lahteine
9d0142e8ae Move Change Filament above Cooldown 2017-03-06 01:13:12 -06:00
Scott Lahteine
0c55095c5e Move Cooldown above Preheat 2017-03-06 01:13:12 -06:00
Scott Lahteine
c15c65f18a Merge pull request #5971 from thinkyhead/rc_fix_e_factors 
Patch DISTINCT_E_FACTORS bug
 2017-03-06 01:11:17 -06:00
Scott Lahteine
bfb0007573 Patch DISTINCT_E_FACTORS bug 2017-03-05 23:19:31 -06:00
Scott Lahteine
be98016674 Merge pull request #5963 from thinkyhead/rc_no_offsets_optim 
New option: NO_WORKSPACE_OFFSETS
 2017-03-05 21:46:49 -06:00
Scott Lahteine
8e89a802f7 Document PROTOCOL_VERSION 2017-03-05 04:43:46 -06:00
Scott Lahteine
87b03b16bd Use a macro for array copies 2017-03-05 04:43:46 -06:00
Scott Lahteine
e141f3a03f Optimize coordinate transformation 
Pre-compute the combined position shift and home offset to save a
single float fetch-and-add per conversion. Great for delta/scara and
bed leveling.
 2017-03-05 04:43:16 -06:00
Scott Lahteine
5f7e85398b Implement NO_WORKSPACE_OFFSETS 2017-03-05 04:43:15 -06:00
Scott Lahteine
05abe853f9 New option: NO_WORKSPACE_OFFSETS 2017-03-05 04:43:15 -06:00
Scott Lahteine
20addc6e32 Merge pull request #5955 from thinkyhead/rc_eeprom_fail_better 
Display a message for EEPROM version mismatch
 2017-03-04 17:15:07 -06:00
benlye
dead89062a Update Marlin_main.cpp 
Remove unnecessary line break from M48 V1 output.
 2017-03-04 17:58:10 +00:00
MagoKimbra
ae277aebc6 Stepper indirection fix tmc driver 2017-03-04 12:17:39 +01:00
Scott Lahteine
8f4e4b1995 Display a message for EEPROM version mismatch 2017-03-04 01:20:36 -06:00
Scott Lahteine
177ad245f6 Merge pull request #5953 from thinkyhead/fix_fc_e_index 
Fix submenu hotend status display
 2017-03-04 00:12:29 -06:00
Scott Lahteine
cea3ea772c Fix submenu hotend status display 2017-03-03 22:12:22 -06:00
Scott Lahteine
b27f69ba51 Merge pull request #5813 from thinkyhead/rc_fix_makrpanel 
Fix MAKRPANEL assignments
 2017-03-03 21:40:49 -06:00
Scott Lahteine
1ef6ccd919 Merge pull request #5951 from thinkyhead/rc_print_2d_array 
Reduce code size (40b, or 166b with bilinear subdivision)
 2017-03-03 21:27:44 -06:00
Scott Lahteine
53f5086905 Fix MAKRPANEL assignments 
MAKRPANEL is a DOGLCD+ULTRA_LCD+NEWPANEL so customize its pins within
that block.
 2017-03-03 21:22:21 -06:00
Scott Lahteine
98c7b682ca General cleanup, const usage, var naming 2017-03-03 20:57:49 -06:00
jes
369bfc8a1e Reduce code size (40b, or 166b with bilinear subdivision) 2017-03-03 20:36:32 -06:00
Scott Lahteine
0d13412105 Fix "Heating..." message 2017-03-03 12:12:51 -06:00
Scott Lahteine
5065636023 Merge pull request #5934 from thinkyhead/rc_advance_ed_ratio 
LIN_ADVANCE: Fixed E/D ratio option
 2017-03-03 03:24:41 -06:00
divendres
75ad82baab Update Catalan language 2017-03-02 20:40:06 -06:00
Scott Lahteine
34253497d4 Babysteps code tweak 
As suggested by https://github.com/MarlinFirmware/Marlin/pull/5887#issuecomment-283832163
 2017-03-02 20:35:45 -06:00
Scott Lahteine
fb4aead2b1 Clean up and finish #5887 2017-03-02 20:16:29 -06:00
Scott Lahteine
b3e2bd6f29 Reduce E_D_ratio code 2017-03-02 01:00:37 -06:00
Sebastianv650
de6c40ed8f Add option to fix E/D ratio 
Work around for slicers producing buggy gcode.
 2017-03-02 01:00:37 -06:00
Scott Lahteine
eeb490221f Remove BEEPER_PIN override in pins_RIGIDBOARD.h 
Resolves #5926. This override is no longer needed since the RAMPS LCD controller pins were fixed.
 2017-03-01 18:26:29 -06:00
Roxy-3D
11e892bd84 Merge pull request #5887 from Roxy-3D/RCBugFix 
Double Click of Encoder Wheel Jumps to Z-BabyStepping
 2017-03-01 17:15:02 -07:00
Scott Lahteine
cbeff12f8a Merge pull request #5933 from teemuatlut/lcd_days_hours 
Fix formatting of SD print time hours above one day
 2017-03-01 15:44:10 -06:00
Scott Lahteine
8a4e9d08a3 Merge pull request #5931 from thinkyhead/rc_core_endstop_fix 
Fix CoreYX / YZ / ZX endstop logic
 2017-03-01 15:32:11 -06:00
teemuatlut
9175d16660 Fix formatting of print time hours above one day 2017-03-01 18:55:25 +02:00
Scott Lahteine
b6d9eb229f Extend Core endstop commentary 2017-03-01 10:01:50 -06:00
Bob-the-Kuhn
c5e08e8761 CoreYX/YZ/ZX needs different endstop logic than CoreXY/YZ/XZ 
In the endstop testing section, add the "reverse" logic in addition to "normal" core handling.

In CoreXY/YZ/XZ steppers rotating the same direction gives X movement. Opposing directions produces Y movement.

In CoreYX/ZY/ZX this is reversed. Same = Y, Opposite = X.

----

Fixes the issue where the Y endstop was being checked when moving in the X direction, etc.
 2017-03-01 09:40:24 -06:00
Scott Lahteine
c759c26cca Make LCD_TIMEOUT_TO_STATUS configurable 
As suggested in
https://github.com/MarlinFirmware/Marlin/issues/5570#issuecomment-283059
065
 2017-02-28 19:02:50 -06:00
Michael Henke
47729918fc
enable ENSURE_SMOOTH_MOVES 2017-02-27 20:42:49 -08:00
Michael Henke
330b981912 created Configuration.h and Configuration_adv.h for the kossel mini sold by flsun 2017-02-25 21:31:37 -08:00
Colin Gilgenbach
48b7e0f8d8 Nozzle Wipe Vertical Zig-Zag 
- Add configuration support for zigzags in either the X or Y axis, for
wipe pads significantly longer in one dimension.
- Add configuration for default number of zig-zag triangles, vs. a
magic number in `Marlin_main.cpp`.
- Update description of auto nozzle wiping to match functionality
 2017-02-25 21:52:43 -06:00
Scott Lahteine
f17b81b765 Add MAPPER_C2C3 to French language 2017-02-25 18:49:00 -06:00
Roxy-3D
7e607b06eb Better comments on DOUBLE_CLICK_TIME_WINDOW 2017-02-23 13:13:57 -07:00
Scott Lahteine
34cba42104 Use PSTR for MSG_HEATING 2017-02-22 11:30:19 -06:00
Roxy-3D
584d147a02 fixup the indentation 2017-02-22 07:23:54 -07:00
Roxy-3D
e443e0e2a9 Fix scoping issues for double click to Z-Babystepping 2017-02-21 18:15:28 -07:00
Roxy-3D
17d1cd7c09 Double Click of Encoder Wheel Jumps to Z-BabyStepping 2017-02-21 18:08:19 -07:00
Roxy-3D
48d862377a Double Click of Encoder Wheel Jumps to Z-BabyStepping 2017-02-21 18:04:31 -07:00
Scott Lahteine
cfdc189796 Merge pull request #5856 from thinkyhead/rc_fix_bad_comment 
Remove non-applicable comment on MANUAL_Z_HOME_POS
 2017-02-20 17:54:30 -06:00
dot-bob
cd68380ce6 Add status_printf to print messages to the lcd status line. 
Also add a hotend indicator to the heating message displayed on the lcd status line.
 2017-02-20 15:26:54 -06:00
Scott Lahteine
012aff6823 Merge pull request #5862 from thinkyhead/rc_fix_a_thing 
Finish reducing of ABL_BILINEAR_SUBDIVISION
 2017-02-18 21:36:28 -06:00
Scott Lahteine
b9187020c4 Finish reducing of ABL_BILINEAR_SUBDIVISION 2017-02-18 20:01:19 -06:00
Scott Lahteine
e282b72151 Remove non-applicable comment on MANUAL_Z_HOME_POS 2017-02-18 05:14:43 -06:00
Scott Lahteine
57f92a4632 Apply DISTINCT_E_FACTORS to sync_from_steppers 
Followup to #5840
 2017-02-18 04:36:41 -06:00
Scott Lahteine
4da8b1494b Merge pull request #5854 from thinkyhead/rc_fixup_m600 
M600 cleanup and bugfix
 2017-02-18 04:27:13 -06:00
Scott Lahteine
dd02dba6e6 Merge pull request #5840 from MagoKimbra/rc_fix_lin_advanced_step_to_mm 
Fix steps_to_mm for active extruders
 2017-02-18 04:25:53 -06:00
Scott Lahteine
6e0b3fcc08 Optimize M600 heater status LCD items 2017-02-18 04:08:00 -06:00
Scott Lahteine
44b4e116bd Commentary / style in gcode_M600 2017-02-18 04:08:00 -06:00
Scott Lahteine
561904345f Tweak config ordering for M600 2017-02-18 00:01:31 -06:00
Scott Lahteine
284d6de9da Remove some old code comments 2017-02-17 15:25:56 -06:00
MagoKimbra
3685224c1a Fix steps_to_mm for active extruders 2017-02-15 21:45:39 +01:00
Scott Lahteine
4578c573fe Pause the print job timer while in M600 2017-02-15 05:29:34 -06:00
Scott Lahteine
bfe6f71794 Simplify filament_change_beep function 2017-02-15 05:29:34 -06:00
Scott Lahteine
8289ea1316 Use a short name for the filament "endstop" 2017-02-15 05:29:34 -06:00
Scott Lahteine
d9dcef8a87 Spacing, coding standards 2017-02-15 05:29:34 -06:00
Scott Lahteine
931914e679 Apply M600 updates to all configs 2017-02-15 05:29:34 -06:00
Roxy-3D
8bf0b496b9 Improve M600 with timeout, wait for heatup. 2017-02-15 05:29:34 -06:00
Tannoo
c40fe2113c Fix for broken MBL 
LCD call was waiting forever, causing the system to hang.
 2017-02-15 04:39:22 -06:00
Scott Lahteine
4d4745c0eb Parenthesize some menu defines for safety 2017-02-14 23:12:27 -06:00
Scott Lahteine
47f9883b0f Dynamic allocation for SDCARD_SORT_ALPHA 2017-02-14 21:37:25 -06:00
Scott Lahteine
a561bd5e3a New feature: SDCARD_SORT_ALPHA 2017-02-14 21:37:24 -06:00
Scott Lahteine
c04d6b5aa6 Merge pull request #5829 from thinkyhead/rc_fix_isr_reentry 
Combine fixes for LIN_ADVANCE and temperature ISR
 2017-02-14 20:36:58 -06:00
Scott Lahteine
467f01435f Merge pull request #5816 from thinkyhead/rc_abl_virt_reduce 
Reduce memory use by ABL_BILINEAR_SUBDIVISION slightly
 2017-02-14 08:41:44 -06:00
Scott Lahteine
97b6fb6381 Reduce / optimize LIN_ADVANCE code 2017-02-14 07:52:03 -06:00
Sebastianv650
271ced7341 Prevent re-entering of temperature ISR 
If Marlin is inside the temperature ISR, the stepper ISR is enabled. If
a stepper event is now happening Marlin will proceed with the stepper
ISR. Now, at the end of the stepper ISR, the temperatre ISR gets enabled
again. While Marlin proceed the rest of the temperature ISR, it's now
vulnerable to a second ISR call.
 2017-02-14 07:52:03 -06:00
Sebastianv650
1b59766fcb Cleanup position_float 
Hopefully fixes Marlin #5481
 2017-02-12 13:09:06 +01:00
Scott Lahteine
a950c31e2d Merge pull request #5815 from thinkyhead/rc_pulses_per_step 
Give encoder pulse/steps conditionals their own block
 2017-02-12 04:14:00 -06:00