Commit Graph

6326 Commits

Author SHA1 Message Date
Scott Lahteine
0750933bc6 Merge pull request #6490 from Bob-the-Kuhn/Missing-X-stop
Endstop not enabled if pin is zero
2017-04-30 15:09:36 -05:00
bgort
5ace3699b1 Output (commented) coordinates on G29 S-1; helps identify the x/y points that correspond with i/j coordinates, which eases manual tweaking of z values (#6507) 2017-04-30 14:59:34 -05:00
Scott Lahteine
d7d4378481 Remove inaccurate version description 2017-04-30 14:57:19 -05:00
Scott Lahteine
f169c04604 Merge pull request #6491 from thinkyhead/rc_cleanup_wednesday
Various cleanups for recent merges
2017-04-30 14:56:48 -05:00
Scott Lahteine
6d63255ddc Merge pull request #6508 from bgort/pio_improvements
PlatformIO-related improvement
2017-04-30 14:53:22 -05:00
LVD-AC
cafc48dff8 little oops 2017-04-30 22:17:49 +03:00
Brian
627730948d Add U8glib as a dependency to platformio.ini for those who use PlatformIO; this makes compiling even easier as u8glib will be downloaded and included automatically.
Also added the new .pio-related directory to .gitignore, and a few ignores for those who use cmake.
2017-04-30 15:13:51 -04:00
bgort
5974d8e168 change G26 default nozzle size to 0.4, consistent with instructions (#6506) 2017-04-30 13:23:46 -05:00
LVD-AC
471a321624 leaner code for probe routine 2017-04-30 19:15:16 +03:00
bgort
3c0d5ba0a1 allow idle() to be called - fixes sometimes crash/hang in G29 I; (#6505) 2017-04-30 10:22:31 -05:00
Roxy-3D
2509587b5a Correct over optimization of pre-initialized variables (#6500)
* Correct over optimization of pre-initialized variables

NEAR_ZERO() works most of the time...  But it leaves corner cases
uncovered.  We need to explicitly check if these variables are +/-
infinity.

* Correct over optimization of pre-initialized variables
2017-04-29 22:01:29 -05:00
LVD-AC
585c00a728 Proposed changes
This is what I did yesterday:

- basicly gave the tests more comprehensive names; put all the
declarations at the top; got rid of the magic negative C-value (renamed
to P + A, O, T)

- "cos(RADIANS(180 + 30 * axis)) * (1 + circles * 0.1 * ((zig_zag) ? 1 :
-1)) * delta_calibration_radius" compiles wrong is zig_zag statement is
without brackets

- DELTA_TOWER_ANGLE_TRIM reset to 3 values (the calcs use the 3th value
to normalize will not compile otherwise)

-Wrote 3 dummies to keep EEPROM lenght the same

-Reset the configs to the 'original' with autocal + menu disabled (but
can be enabled of course)
2017-04-29 18:53:14 +03:00
Scott Lahteine
29fa241617 Initial patches to G33 2017-04-29 15:29:49 +03:00
Scott Lahteine
12ce051b55 Add a function to output spaces to serial 2017-04-29 15:29:49 +03:00
Scott Lahteine
42f4c53254 Starting on G33 rewrite 2017-04-29 15:29:49 +03:00
Scott Lahteine
baf3b91460 DELTA_TOWER_ANGLE_TRIM only needs AB 2017-04-29 15:29:49 +03:00
emartinez167
27cd165adf Last three Spanish language strings
Updates as per @thinkyhead request.
2017-04-29 11:33:30 +08:00
Scott Lahteine
2cc9774f34 Apply bltouch_menu
As proffered in #6252
2017-04-28 18:43:03 -05:00
Scott Lahteine
1a111180de Clean up set_heaters_for_bltouch 2017-04-28 18:32:39 -05:00
Scott Lahteine
7db805930a Cleanup configurations 2017-04-28 18:32:39 -05:00
Scott Lahteine
8bf3a3fcdb Remove inaccurate comments from ubl.h 2017-04-28 18:32:38 -05:00
Scott Lahteine
47557d5a19 Fix up formatting in ubl.h 2017-04-28 18:32:38 -05:00
Scott Lahteine
0a8e09c723 Clean up excess whitespace, comment formatting 2017-04-28 18:32:38 -05:00
Scott Lahteine
a35c681453 Clean up least_squares_fit 2017-04-28 17:33:28 -05:00
Bob-the-Kuhn
40089249c3 add PIN_EXISTS to HAS_xyz_MIN macro 2017-04-28 16:47:59 -05:00
Scott Lahteine
8020069371 Apply coding standards for indentation 2017-04-28 15:43:06 -05:00
Scott Lahteine
dabca83742 Merge pull request #6437 from Kaibob2/patch-1
Update language_de.h
2017-04-28 14:47:47 -05:00
Kai
3d0a4c4ea9 Update language_de.h 2017-04-28 21:09:10 +02:00
Silvio
6bf1d50188 Added missing translations (#6458) 2017-04-28 13:49:16 -05:00
Mehmet Sutas
404f767d44 Update language_tr.h (#6463) 2017-04-28 13:48:31 -05:00
Petr Zahradnik
5e701524f8 Update language_cz.h for new translations (#6465)
* Update language_cz.h for new translations

* Correction translate

* Revert correction back to hotend
2017-04-28 13:47:43 -05:00
gege2b
0a92ce7a98 Completed french translation (#6475) 2017-04-28 13:46:09 -05:00
Ernesto Martinez
ff4fb42e7d Add new strings as per recent changes in RCBugFix (#6482)
Adding missing strings to Spanish language, as per changes recently
done to the RCBugFix branch.
2017-04-28 13:45:22 -05:00
paulusjacobus
67d1fc5556 Update language_nl.h (#6478)
updated the RCbugfix release with additional Dutch translations
2017-04-28 13:42:39 -05:00
benlye
8c6b4537a6 Fix issue in itostr4sign with numbers <100 (#6487)
The first character in the string wasn't blanked if the number went from >= 100 to <100, resulting in artefacts in the displayed string.
2017-04-28 13:35:11 -05:00
LVD-AC
4ea8d0f89b Solved "The Travis CI build failed " 2017-04-28 19:55:21 +03:00
LVD-AC
ed6b361e27 cleanup ready to squash 2017-04-28 18:09:18 +03:00
LVD-AC
7a6a1ef583 M666 normalize positive values to <=0
M666

+ tower radians absolute value
2017-04-28 18:05:24 +03:00
Roxy-3D
4075b95519 Allow BL-Touch users to control heaters during probe event (#6485)
The Configuration.h file entries for BL-Touch have been updated to:
```cpp
//#define BLTOUCH
//#define BLTOUCH_DELAY 375      // (ms) Enable and increase if needed
//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are
turned off during probe event
```
2017-04-28 09:19:55 -05:00
Roxy-3D
6e8ecb908a Shut down heaters during BL-Touch probe event
The electro-magnetic interference from the bed and nozzle are affecting
the BL-Touch repeatability for some users.   This problem can be helped
by shutting down the heaters during the actual probe event and then
quickly turning them back on.

Because this code is messing with the heaters, it is written in a
paranoid manner.  It only turns the heaters back on if everything is
EXACTLY as it expects things to be.  The BL-Touch probe must have been
put into a deployed state less than 20 seconds prior, or the stow()
function will NOT turn the heaters on.

This code has been tested and works for both G28 and probing functions.
2017-04-27 18:52:58 -05:00
LVD-AC
d8102aeca8 Cn negative : no tower angle calibration
Giving a negative number of probe points disables the tower angle
correction calibration ('4point' instead of '7point' solution)

EEPROM version updated
2017-04-27 21:13:07 +03:00
Roxy-3D
3601f08e87 Better tuned FolgerTech i3-2020 example file 2017-04-27 11:16:38 -05:00
Roxy-3D
a20b7d9581 Better tuned Example file for FolgerTech i3-2020
Also setting up Z-Probe on the machine.
2017-04-27 11:16:38 -05:00
Kai
bf2fe46062 Update language_de.h 2017-04-27 10:13:02 +02:00
Kai
11d34be060 Update language_de.h 2017-04-27 10:06:26 +02:00
Scott Lahteine
817ecb9ff4 Merge pull request #6453 from thinkyhead/rc_cleanup_wednesday
Minor cleanups, work-in-progress
2017-04-26 19:41:52 -05:00
Roxy-3D
22f6e277af Get example files fully into compliance
Change to support new name GRID_MAX_POINTS_XY
Start UBL at version 1.0 in the CUSTOM_MACHINE_NAME
2017-04-26 16:22:17 -05:00
LVD-AC
a9bc1d30cc z_offset change
Avoids to have to recalibrate the delta_height after a z_offset change
2017-04-26 21:57:11 +03:00
Roxy-3D
ec26e23e7e Add my two 'Nice' machines as example configurations
These are my two 'Nice' machines.  Both are good example machines.  The
FolgerTech i3-2020 is probably the best value kit on the market right
now.  And it has developed a 'Cult Following' of hobbiests.  I'll always
have an up to date Configuration.h file set for it, so it may as well be
an example configuration.

And the gCreate gMax 1.5+ is the best printer I've ever seen that runs
Marlin.  For sure, I'll always have up to the minute Configuration.h
files for this printer also.   I've moved over to using the gMax as my
primary development machine for Marlin.   So...  Besides being a good
machine, it is a nice convienience for me to have this Configuration.h
file as an 'Example'.
2017-04-26 12:46:12 -05:00
Scott Lahteine
adb8e68592 Fix stuck "Print Aborted" LCD message
Fixes #6393
2017-04-26 06:24:23 -05:00
Scott Lahteine
096b927102 Minor optimization of FILAMENT_WIDTH_SENSOR 2017-04-26 06:24:23 -05:00
Scott Lahteine
5bdb0b567d Cosmetic patches 2017-04-26 06:24:23 -05:00
Kai
38ae7f4238 Added more translation strings
There are some quite tricky ones which are hardly translateable.
Maybe @Sebastianv650 can review this
2017-04-26 11:58:11 +02:00
Scott Lahteine
4d96d3eab1 Bootscreen delay after clear, then set chars
Fixes #6426
2017-04-25 23:37:28 -05:00
Scott Lahteine
5512130d6c Only set Compare Mode for channel A
Fixes #6445
2017-04-25 23:14:16 -05:00
Roxy-3D
d467e97679 Smart-Fill and Mesh-Tilting (both 3-point and grid) working!
Also...   The memory corruption issue may be fixed.   The GCC compiler
was inlining static functions and this caused the G29() stack frame to
become much larger than the AVR could handle.
2017-04-25 21:03:41 -05:00
Scott Lahteine
a699967ec8 Merge pull request #6443 from thinkyhead/rc_interrupt_fastio
Patch fastio.h with Timer 2 interrupt support
2017-04-24 20:09:41 -05:00
Scott Lahteine
2823bf0874 Update fastio.h with special handling for Timer 2 2017-04-24 16:58:22 -05:00
Scott Lahteine
fd535e111a Fix up XYZ_CONSTS_FROM_CONFIG macro 2017-04-24 14:05:11 -05:00
Kai
03c2f756b9 Update language_de.h 2017-04-24 13:32:16 +02:00
LVD-AC
dcf30a69d6 Allowing #define DELTA_TOWER_ANGLE_TRIM[C_AXIS]
More consistent with M665 where C-value is allowed as well, then
normalized
2017-04-23 14:51:24 +03:00
Brian
f41fb2b635 Numerous UBL-related changes:
* relocated ubl state to config. store:
 * removed a number of ubl state variables and padding which were largely unused - saved 58 bytes of both SRAM and EEPROM;
 * modified ubl sanity_check - no longer checks removed state variables that were otherwise unused, where checking didn't seem to accomplish anything, ultimately;
 * removed pre_initialized state, saving 64 bytes of SRAM;
 * removed automatic saving of UBL state after UBL activation/deactivation;
* consolidated multiple GRID_MAX_POINTS_X/Y to 'Global Leveling' section of EEPROM;
* minor update to G29 Sx notes/instructions;
* renamed mesh load and save parameter to 'slot' from 'm' for clarity;
2017-04-22 18:44:39 -05:00
Brian
f1a4758cef use progmem instead of sram for mesh_index_to_x/ypos array;
fix maximum mesh_index_ array size at 16 (15+1);
2017-04-22 18:34:49 -05:00
Scott Lahteine
87d240042a Optimize number-to-string functions, no-fan display 2017-04-22 16:23:15 -05:00
Scott Lahteine
959566cf0a Update note about M163 / M164 2017-04-22 16:23:15 -05:00
Scott Lahteine
830851df13 Spend some SRAM to optimize bilinear leveling 2017-04-22 16:19:31 -05:00
Scott Lahteine
091179d960 bed_level_grid => z_values (also *_virt array) 2017-04-22 16:19:31 -05:00
Scott Lahteine
23cdbbb2d3 Add a method to refresh bilinear bed level after a change 2017-04-22 16:19:30 -05:00
Scott Lahteine
ccda63c473 Drop the accessor form for LCD value editing 2017-04-22 16:19:30 -05:00
Scott Lahteine
10da175be5 Fix a pair of compiler complaints 2017-04-22 16:19:30 -05:00
Scott Lahteine
ff0018e287 Format hex values as uppercase 2017-04-21 21:42:41 -05:00
android444
77aa16005d Polish font
Add polish font for GLCD displays only.
HD44780 work properly without polish character.
Update language_pl.h.
2017-04-21 21:42:41 -05:00
teemuatlut
244f67590e Delta probe height bug solved 2017-04-22 02:23:56 +03:00
Hans Raaf
406a83ff2d Fix for Meshpositions if printer has negative endstop positions 2017-04-22 00:16:16 +02:00
benlye
3ed737425d Fix typo in new SET_COM macro 2017-04-21 15:08:18 -05:00
Brian
88649b06a6 use planner.z_fade_height, etc. instead of private, ubl-specific g29 fade height 2017-04-21 09:09:09 -05:00
LVD-AC
004928148c Tower angles
Adding '7-point' tower angle correction calibration
2017-04-21 12:48:45 +03:00
LVD-AC
76ec7a0f80 Adding upto 7*7 probe grids
- adding Cn 5, 6 and 7
2017-04-21 11:58:39 +03:00
LVD-AC
d4f593d200 Delete 'expert level'
and getting rid off verbose level 3 and configuration_adv settings
2017-04-21 11:58:39 +03:00
LVD-AC
13c8493878 M665 rework and related issues (all delta's)
- Making M665 compatible with repetier (see
http://reprap.org/wiki/G_code#M665:_Set_delta_configuration)

- M665 B also sets the radius for manual calibration menu

- Converting tower ajustment definitions to arrays - tower angle
corrections compatible with Esher 3D wizzard

- Only tower angles need to be adjustable with M665 and stored to EEPROM
- tower radius and diag rod can be adjusted in the FW only with #define
2017-04-21 11:58:39 +03:00
Scott Lahteine
e0e069c6d8 Clean up trailing whitespace 2017-04-20 17:52:07 -05:00
Scott Lahteine
9b94210394 Bring FLSUN config more up to date 2017-04-20 17:52:06 -05:00
Scott Lahteine
b0aa256bc0 Updates for all configs 2017-04-20 17:52:05 -05:00
Scott Lahteine
ee46ce1743 Add and apply interrupt helper macros 2017-04-20 16:04:29 -05:00
Scott Lahteine
6131c62499 General cleanup 2017-04-20 16:04:29 -05:00
benlye
2c86dfd3b5 Fix compiler type conversion errors after LCD changes 2017-04-20 16:04:29 -05:00
Scott Lahteine
55f9e76610 Merge pull request #6367 from thinkyhead/rc_cleanup_followup
Cleanup after some direct commits
2017-04-20 15:13:24 -05:00
Scott Lahteine
d38a792a91 Merge pull request #6382 from MagoKimbra/fix_configuration_store
Fix double definition in configuration_store
2017-04-20 15:06:58 -05:00
Scott Lahteine
b98bc034ae Replace c_assert hack with static_assert 2017-04-19 13:07:35 -05:00
Scott Lahteine
5eb2b1a790 Clear up G29 compiler warnings 2017-04-19 13:07:35 -05:00
Scott Lahteine
4ce2a63db0 Apply const, spacing to Marlin_main.cpp 2017-04-19 13:07:34 -05:00
Scott Lahteine
e97f1284c1 Cleanup of pins testing code 2017-04-19 13:07:34 -05:00
Scott Lahteine
e9b53ae00c Cleanup after some direct commits
https://github.com/MarlinFirmware/Marlin/commit/5e9726530ff21d3bc62beaa6
ac1b9437c276130a
2017-04-19 13:07:34 -05:00
Scott Lahteine
e05d050a1e Add hex routine to print an address 2017-04-19 13:07:34 -05:00
Scott Lahteine
4542282f5e Fix broken TOGGLE macro in fastio.h 2017-04-19 12:38:13 -05:00
MagoKimbra
ed52275a14 Fix double definition in configuration_store 2017-04-18 17:57:40 +02:00
Scott Lahteine
de569e3d4e Merge pull request #6327 from Bob-the-Kuhn/M43-toggle-&-Z-probe-fixes
M43 Toggle & Z servo test - fix bug & add another check
2017-04-18 03:21:57 -05:00
Scott Lahteine
f33a650ecc Merge pull request #6368 from thinkyhead/rc_linear_advance_eeprom
Add Linear Advance values to EEPROM and LCD
2017-04-18 02:54:12 -05:00
Scott Lahteine
a00ae4790a Replace M905 with unique code M900 2017-04-17 16:39:37 -05:00
Scott Lahteine
1286d9603d Clean up and organize ultralcd.cpp 2017-04-17 16:39:36 -05:00