daid303
ffc69537aa
Update on some comments, make the MOTHERBOARD list complete again.
2012-11-09 09:10:51 +01:00
daid303
71efcfc648
Most likely fixing issue #295 .
2012-11-08 21:08:05 +01:00
daid303
04be9d6001
God damn. Sorry, my mistake, forgot to add this file.
2012-11-07 23:16:43 +01:00
daid303
c17da4b707
Add ConfigurationStore to the Makefile.
2012-11-07 22:43:01 +01:00
daid
ccd9fd0dc3
Merge pull request #292 from jothan/lcdfix
...
Lcd fixes
2012-11-07 13:10:59 -08:00
Jonathan Bastien-Filiatrault
46b9988e26
Search and replace failure.
2012-11-07 16:09:30 -05:00
Jonathan Bastien-Filiatrault
0f73afb0b0
Avoid defining overriding definitions for the RepRapDiscount Smart
...
Controller. Remove common definitions. Harmonize declaration order.
2012-11-07 16:04:28 -05:00
Jonathan Bastien-Filiatrault
36b452c7ac
Remove abbrs.
2012-11-07 15:42:18 -05:00
daid
a394ac9f95
Merge pull request #294 from YanFM/patch-1
...
Update Marlin/language.h
2012-11-07 06:21:28 -08:00
YanFM
332344bd43
Update Marlin/language.h
...
Included Portuguese language
2012-11-07 09:43:13 -02:00
daid303
e6c1cadea0
Set the watchdog to a 4 second timeout, as with 1 second it can timeout during SD card init.
2012-11-07 12:32:17 +01:00
daid
faea7d72b8
Merge pull request #290 from buildrob/Marlin_v1
...
Clean up special serial port cases
2012-11-07 02:00:26 -08:00
daid303
12a4d60e18
Fix the EEPROM storage, no longer inline it at multiple locations, and remove the template.
2012-11-07 10:02:45 +01:00
Robert F-C
08337e01f7
Added change to feature list.
2012-11-07 17:28:46 +11:00
Jonathan Bastien-Filiatrault
9606f4d04f
Include Marlin_main.cpp in source files.
2012-11-06 20:32:48 -05:00
Jonathan Bastien-Filiatrault
3cbaad9288
RepRapDiscount Smart Controller pin definitions.
2012-11-06 20:32:13 -05:00
Robert F-C
99692dc99e
Clean up special serial port cases
...
Assume SERIAL_PORT 0 if not defined. Collapse un-numbered register
special case. Clarify comments.
2012-11-07 09:00:21 +11:00
daid303
5a998558a9
Update suggested by Robert F-C. #289
2012-11-06 21:04:29 +01:00
daid303
f6ff0ab767
signed/unsigned fixes.
2012-11-06 15:33:49 +01:00
daid303
5d471e0f34
Also reset the PID values to defaults. Fixes #281
2012-11-06 15:21:00 +01:00
daid303
d3ebc34958
Hopefully also support chips with a single UART in MarlinSerial now.
2012-11-06 14:43:36 +01:00
daid303
b6ff45254e
Better explain the watchdog "problem" and rename the config define so it explains that the feature belongs to the watchdog.
2012-11-06 13:33:00 +01:00
daid303
7e348fcb5f
By mistake enabled the watchdog by default. This should be off by default.
2012-11-06 13:20:08 +01:00
daid303
06b58a9c4f
First cleanup. Moved all code to cpp files, so there are no dependencies on pde files. And no more odd requirement to cat files together. (Still need to fix the Makefile). Also cleaned up some defines and made defines upper case as by C coding conventions.
2012-11-06 12:06:41 +01:00
daid
539f3b3fe4
Merge pull request #284 from brackendawson/Marlin_v1
...
Use the right pins for Gen7 1.4
2012-11-06 01:06:24 -08:00
daid
2f20df3f55
Merge pull request #289 from buildrob/Marlin_v1
...
Marlin v1 configurable serial port
2012-11-06 01:00:50 -08:00
Robert F-C
65c9a0728f
Set default serial port back to 0.
2012-11-05 22:15:07 +11:00
Robert F-C
ab9d183024
Make serial port configurable.
...
This change makes the choice of serial port configurable so that
wireless capability can be easily added by connecting Bluetooth modules
(such as BlueSmirf or JY-MCU) to the expansion port pins.
2012-11-05 21:34:27 +11:00
Bracken Dawson
f5631a89e8
Add dummy Emergancy Pin to Gen7 1.4
...
Change required after pulling from ErikZalm.
2012-10-26 22:28:37 +01:00
Bracken Dawson
a4f9e1ebf2
Merge git://github.com/ErikZalm/Marlin into Marlin_v1
2012-10-26 22:20:35 +01:00
Bracken Dawson
2873d67b17
Put bogus temp override back in Gen7 up to 1.3
...
Took out the ifdef when I split 1.4 out and forgot to permanently
define it for <=1.3.
2012-10-26 22:17:26 +01:00
ErikZalm
a7e40b2903
Merge pull request #276 from setar/Marlin_v1
...
Fix num of digits on LCD for E and Z axis.
2012-10-23 09:48:55 -07:00
ErikZalm
23b0f8ed4b
Merge pull request #279 from MaikStohn/Marlin_v1
...
Fixed wrong code (will not even compile when EXTRUDERS>2)
2012-10-23 09:48:02 -07:00
MaikStohn
6ed02c86be
Fixed wrong code (will not even compile when EXTRUDERS>2)
2012-10-23 18:08:43 +02:00
Sergey Taranenko
2a67363e27
Fix ‘prog_uchar’ definition in LiquidCrystalRus.cpp
2012-10-22 11:05:17 +04:00
Sergey Taranenko
205304ddee
Merge git://github.com/ErikZalm/Marlin into Marlin_v1
2012-10-22 10:59:27 +04:00
Erik vd Zalm
58bca87c72
fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 '
2012-10-21 14:40:06 +02:00
Erik vd Zalm
febeb43197
Revert "fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 '"
...
This reverts commit cb02c2f9d8
2012-10-21 14:36:31 +02:00
Sergey Taranenko
8178dec4c3
Fix num of digits on LCD for E and Z axis.
...
The number of steps per mm often contains 4 digits before the decimal point and does not require precision greater than 0.1
2012-10-18 17:45:40 +04:00
ErikZalm
70f57a6844
Merge pull request #273 from setar/Marlin_v1
...
fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 '
2012-10-17 04:10:18 -07:00
ErikZalm
ff14199e58
Merge pull request #270 from jothan/Marlin_v1
...
Create an explicit rule for building applet/Marlin.cpp.
2012-10-17 04:09:36 -07:00
ErikZalm
bfdf0932c1
Merge pull request #274 from DanieleSdei/Marlin_v1
...
Italian language support
2012-10-17 04:09:13 -07:00
Daniele Sdei
695938ba3f
Italian language support
2012-10-17 12:48:26 +02:00
Sergey Taranenko
cb02c2f9d8
fix LCD temp bed artifacts on power up ' B022/0.) -> B022/000 '
2012-10-17 10:49:05 +04:00
Jonathan Bastien-Filiatrault
e4a5e333ef
Generalize.
2012-10-15 21:34:33 -04:00
Jonathan Bastien-Filiatrault
e10d3136c8
Create an explicit rule for building applet/Marlin.cpp.
...
It would seem that the pattern matches do not work when the source
file is created when make is running. The result of this is that it is
necessary to run "make" twice to build the firmware.
This adds an explicit rule without a pattern match for building
applet/Marlin.cpp it corrects the make behaviour at the cost of adding
a little redundancy in the Makefile.
2012-10-15 21:16:25 -04:00
ErikZalm
9f089756b7
Merge pull request #265 from setar/Marlin_v1
...
Added Russian translation
2012-10-14 14:11:58 -07:00
ErikZalm
654387297f
Merge pull request #268 from brupje/Marlin_v1
...
Marlin v1
2012-10-14 08:55:01 -07:00
brupje
326423719f
Add support for Megatronics
2012-10-14 14:05:57 +03:00
brupje
d07b6e93d5
Add support for Megatronics
2012-10-14 14:05:12 +03:00
