MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
10,221 Commits 1 Branch 0 Tags 96 MiB
1.1.x
Commit Graph

8517 Commits

Author SHA1 Message Date
Roxy-3D
3ef6cf0bfb
declare void Max7219_register_setup(); 2018-08-15 10:39:08 -05:00
Scott Lahteine
5f0798544e Update Czech language 
Co-Authored-By: petrzjunior <junior@zahradnik.cz>
 2018-08-14 18:47:24 -05:00
teemuatlut
b4efefea8b [1.1.x] Fix TMC2208 SW serial communication (#11548) 
* New TMC2208 constructor
* Update default driver configuration
 2018-08-14 18:44:17 -05:00
Roxy-3D
e518533a75
Change M7219 I to setup Max7219 registers, but not do initialization pattern 2018-08-13 17:48:17 -05:00
Roxy-3D
02381d6821
Make M7219 I more robust and nicer to look at 2018-08-13 17:05:13 -05:00
Roxy-3D
263beae3e9 Add I parameter to ignore pin protection on M42 2018-08-13 16:50:24 -05:00
Scott Lahteine
cc6a31528d Improve AXIS_DRIVER_TYPE macros 2018-08-13 16:50:24 -05:00
Aaron Griffith
5482af38f0 Remove oversampled data from thermistor table 71 (#11504) 
Data in Table 71 is extremely oversampled (see Issue #11220). I have removed the data points that perform *worse* than linearly interpolating the remaining points, and fixed up two points that were simply rounded incorrectly.
 2018-08-13 02:52:48 -05:00
Scott Lahteine
a9cb4834da Allow Einsy RAMBo FAN1_PIN override 2018-08-13 02:48:25 -05:00
Shen Yiming
7b0a8e85ba Fix pca9632_set_led_color lost i2c connection (#11530) 2018-08-12 18:05:00 -05:00
Scott Lahteine
77625654f4 Reduce max accel in Creality configs 2018-08-11 22:57:44 -05:00
Scott Lahteine
bdb2dd27ad Allow G33 to compile with no LCD 2018-08-11 22:45:04 -05:00
Scott Lahteine
f1467ddc0e UBL/planner patch tweaks 2018-08-11 22:45:04 -05:00
Thomas Moore
105d20c2e8 Account for UBL correction when setting the planner position (#11511) 2018-08-10 13:00:45 -05:00
Scott Lahteine
9e46e84a55
Treat TMC2660 like non-TMC (#11485) 2018-08-10 00:30:11 -05:00
Scott Lahteine
4f59ee8978 Minor spacing fixes 2018-08-07 14:00:48 -05:00
Scott Lahteine
e741241721 No raise when homing after power-loss 2018-08-07 13:50:33 -05:00
Scott Lahteine
332a80cadb Restore bugfix README, etc. 2018-08-07 13:45:03 -05:00
lsellens
614a944504 auto power control without heated bed (#11467) 
`AUTO_POWER_CONTROL` will not work if printer has no heated bed due to `degTargetBed()` not being defined
 2018-08-06 23:18:13 -05:00
Giuliano
33364c17b9 [1.1.x] Better timing handling (#11462) 2018-08-06 23:14:11 -05:00
Scott Lahteine
b8d4c4216f
Easier to disable homing validation (#11457) 2018-08-06 23:11:28 -05:00
Thomas Basler
e3398b2203 Merge branch '1.1.x' of https://github.com/MarlinFirmware/Marlin into 1.1.x 2018-08-04 11:09:44 +02:00
Scott Lahteine
86d9af1108
Fix drivers.h dependency, defer macro evaluation (#11449) 2018-08-03 21:48:57 -05:00
silentninja1
4c4fffc503 [1.1.x] Fix Dual X Carriage tool change crash (#11425) 2018-08-03 20:47:19 -05:00
Marcio Teixeira
fae96a6a13 Fix jumping progress bar. (#11438) 
- When `LCD_SET_PROGRESS_MANUALLY` was disabled and an SD print was not active (i.e. the printer was idle), progress_bar_percent would read uninitialized memory from stack and cause progress bar to jump wildly.
- Also updated conditions in `#ifdef` to match `ultralcd.cpp`
 2018-08-03 17:16:14 -05:00
Scott Lahteine
f816d6f70f Merge remote-tracking branch 'upstream/bugfix-1.1.x' into release_119 2018-08-02 18:46:23 -05:00
Roxy-3D
7d491aa015 Tiny improvement to M7219 
The registers within the Max7219 can get corrupted a number of ways.  This allows the Max7219 to be reset and fully initialized.
And...  it also allows the user to see the initialization pattern.
 2018-08-02 18:43:36 -05:00
Scott Lahteine
888d319145 Align some config options 2018-08-02 18:42:20 -05:00
Thomas Basler
4b0b506a35 Set right motor drivers and enable inch mode support 2018-08-01 21:27:06 +02:00
Thomas Basler
2080439d7f Update configuration to match new board name 2018-08-01 21:18:56 +02:00
Thomas Basler
c95b0482fd Merge remote-tracking branch 'upstream/1.1.x' into 1.1.x 2018-08-01 21:11:00 +02:00
Scott Lahteine
ed86550061 Version 1.1.9 2018-07-31 02:30:48 -05:00
Scott Lahteine
2ef02eafc0 Merge bugfix-1.1.x for 1.1.9 update 2018-07-31 02:16:18 -05:00
MikeLud
a2ac7e1407 Add M915 to Prepare Menu (#11383) 2018-07-31 02:03:49 -05:00
Shen Yiming
8db91f0bd1 Clean up 12864 OLED code (#11388) 2018-07-30 23:02:12 -05:00
Scott Lahteine
c4f4c255b4
Fix initial safe_speed in jerk code (#11396) 2018-07-30 22:49:20 -05:00
Roxy-3D
33c37d587d
Revert "[1.1.x] idex and bl touch fix" (#11406) 
* Revert "[1.1.x] bltouch home refinements (#11398)"

This reverts commit 30839a6ba6.

* Revert "[1.1.x] idex and bl touch fix (#11392)"

This reverts commit e1bef0ea79.
 2018-07-28 23:14:41 -05:00
Giuliano
30839a6ba6 [1.1.x] bltouch home refinements (#11398) 
Just create a better functions call logic flow
 2018-07-28 19:29:26 -05:00
silentninja1
e1bef0ea79 [1.1.x] idex and bl touch fix (#11392) 
* [1.1.x] IDEX and BLTouch Fixes

Fix bltouch not deploying during fast home, fix dual x carriage setting opposing side park position as destination on tool change

* Update Marlin_main.cpp

* Update Marlin_main.cpp

* Change brackets to be more in conformance with Marlin coding standards
 2018-07-28 10:33:35 -05:00
Giuliano
7284488da3 [1.1.x] fix bltouch homing (#11380) 
Partially revert. Seems to solve the issue, but one report says G29 still fails.
 2018-07-27 18:29:26 -05:00
Scott Lahteine
cab2e0877e Update DELAY_10US 2018-07-26 20:21:50 -05:00
bleughb
b6f24992ee [1.1.x] Update fastio_1280.h pin mapping comments (#11374) 2018-07-26 05:19:05 -05:00
Scott Lahteine
c30f636d22
Improve drivers.h macros (#11372) 2018-07-26 05:10:11 -05:00
Giuliano
2f76ec5c6a [1.1.x]-different-bltouch-init (#11358) 2018-07-26 05:03:39 -05:00
Scott Lahteine
56fbe3361b
Ensure ADC conversion is complete before reading (#11370) 
Co-Authored-By: gloomyandy <andy-git@gloomy-place.com>
 2018-07-26 03:58:33 -05:00
vitekn
b5ed4a1a8c Fix thermistor type in Anet A6 config (#11346) 
I have Anet a6 and my thermistor is NTC 3950. If the default is 5 (ATC Semitec 104GT-2) it gives overheat upto 330 degrees (real) instead of 250 (displayed). I don't know for sure if all the A6 have such thermistor but I think it's safer to have underheat than overheat. And 3950 looks more spread among A6 searching on Internet. The same is true for the bed though it has small difference at the beginning of scale, actually +-2 degrees.
 2018-07-26 02:03:30 -05:00
Scott Lahteine
2af06b82b4 Specify some extra CR-10S pins 2018-07-25 18:18:33 -05:00
Scott Lahteine
637489ae17 Tweak some SoftPWM code 2018-07-25 18:16:33 -05:00
Scott Lahteine
349cf3ee5a Sync enqueue_and_echo_command with 2.0.x 2018-07-25 18:06:31 -05:00
Giuliano
e5b928f574 [1.1.x] Typo fix (#11366) 
Typo fix
 2018-07-25 18:00:28 -05:00
Scott Lahteine
7bad507d70 Simplify stepper driver config 2018-07-25 03:02:12 -05:00
Scott Lahteine
6d6bdc6517 Add *_DRIVER_TYPE to example configs 2018-07-25 02:39:16 -05:00
silentninja1
57ce81f067 [1.1.x] Fix LCD axis move E index (#11328) 2018-07-25 02:21:05 -05:00
Scott Lahteine
ed0e72bf44 Fix spelling in configs 2018-07-24 21:02:22 -05:00
silentninja1
060e7a3565 Silentninja1 idex crash fix (#11329) 
* Move home all axis prototype to allow access from UBL.h

* Remove home all axis command as it exists in marlin.h now

* Reverse order of tool change and home

Race condition causes E0 carriage to move on E1 commands and crash into parked head if order is reversed. Needs more research into permanent fix, but this will prevent damage to machines in the meantime.
 2018-07-24 14:44:50 -05:00
Scott Lahteine
3bbb121e7d Tweak some Max7219 code 2018-07-19 18:51:35 -05:00
Scott Lahteine
d1590fec3e
Merge pull request #11308 from thinkyhead/bf1_manual_probe_start_z 
[1.1.x] Manual Z Start Height
 2018-07-19 18:26:51 -05:00
Roxy-3D
6c62b0e263
Change Max7219_idle_task() to use columns if Y-Axis has 16 LED's (#11317) 2018-07-19 16:59:38 -05:00
Thomas Basler
bb7ab11f65 Remove not required menu entries 2018-07-19 13:15:01 +02:00
Thomas Basler
b99e8862d8 Change commit behavior of custom command 2018-07-19 13:13:28 +02:00
Thomas Basler
f91fa66f48 Disable custom bootscreen to increase startup time 2018-07-19 13:12:36 +02:00
Scott Lahteine
221e8bbb05 Add MANUAL_PROBE_START_Z to example configs 2018-07-18 21:50:18 -05:00
Scott Lahteine
888774cbc3 Add MANUAL_PROBE_START_Z for manual probing 2018-07-18 21:50:18 -05:00
Scott Lahteine
db057eb453 Fix tool_change call in UBL G29 
Fix #11279, #11252
 2018-07-18 20:35:14 -05:00
Scott Lahteine
5ce312f158
Merge pull request #11305 from thinkyhead/bf1_power_loss_pin 
[1.1.x] Add support for power loss detect pin
 2018-07-18 20:13:47 -05:00
Scott Lahteine
389f2ac81f planner.synchronize at start of tool_change 
See https://github.com/MarlinFirmware/Marlin/issues/10949#issuecomment-398540498
 2018-07-18 20:09:39 -05:00
Scott Lahteine
7321f30ac0 Add POWER_LOSS_PIN support 2018-07-18 19:58:06 -05:00
Scott Lahteine
46b0e054b1 Add POWER_LOSS_PIN to example configs 2018-07-18 19:58:06 -05:00
Giuliano
9d0627d66c Make GCodeParser::debug static (#11294) 2018-07-17 23:38:39 -05:00
Scott Lahteine
6024ffedd9 Improve Malyan progress / feedrate 
Co-Authored-By: J.C. Nelson <xc0000005@users.noreply.github.com>
 2018-07-17 19:33:57 -05:00
Scott Lahteine
7e648f3721 Add card.longest_filename, more lcd_strlen updates 2018-07-17 19:33:57 -05:00
Scott Lahteine
036f25e159 More lcd_strlen updates 2018-07-17 18:17:19 -05:00
Scott Lahteine
17e1eec21e Make sure linear units are initialized 
Based on #11295

Co-Authored-By: Giuliano <gmagician@users.noreply.github.com>
 2018-07-17 17:20:57 -05:00
Roxy-3D
58775cc694
Don't display M421 values for UBL at startup 
It takes 20 seconds to display the mesh values at startup...   If we are going to display this information at startup, we should find a more terse way to do it.   Perhaps displaying an entire row of the mesh at a time makes sense?
 2018-07-17 17:17:09 -05:00
Thomas Basler
77268b38c9 Add M7, M8 and M9 gcode for better compatibility with CNCJS 2018-07-17 23:34:30 +02:00
Thomas Basler
5edac0d69e Remove several LCD menu items which are not required for CNC 2018-07-17 23:29:26 +02:00
Thomas Basler
a02ceb16e1 Added further CNC configuration 2018-07-17 23:28:35 +02:00
Scott Lahteine
fbc3fdb490 LCD strlen functions like 2.0.x 2018-07-17 15:25:58 -05:00
Scott Lahteine
756080fcca Followup to floats patch 2018-07-17 15:24:33 -05:00
Giuliano
e6801ff84a [1.1.x] Fix change filament (#11268) 
Prevent crash, on filament change, when printer is not homed
 2018-07-16 21:48:45 -05:00
Roxy-3D
bc961220b7
Change Max7219_idle_task() routines to use single line if X-Axis has 16 or more LED's 
Change Max7219_idle_task() routines to use single line if X-Axis has 16 or more LED's

This gets bugfix_1.1.x at parity with https://github.com/MarlinFirmware/Marlin/pull/11285 when it gets merged.
 2018-07-16 19:23:59 -05:00
Thomas Basler
163cd6bd5c Adjust settings on current machine 2018-07-15 02:20:32 +02:00
kaimimue
256f76d35e Fix Vellemann K8400 Configuration (#11258) 
The maximum movement is 180mm for Velleman K8400.
An offset of `Y_MIN_POS` violates an assertion in `SanityCheck.h`.

Code tested on Vellemann K8400 with Dual Extruder.
 2018-07-13 23:15:00 -05:00
Giuliano
1067c43107 [1.1.x] fix kill printer (#11261) 
This will fix kill message on dual printer with 0 alignment offset
 2018-07-13 23:13:29 -05:00
Scott Lahteine
d60b2e5ba8
Merge pull request #11233 from nightgryphon/multiprobe-z-up 
[1.1.x] Shorter Z raise between multiple probes
 2018-07-12 22:44:25 -05:00
Scott Lahteine
cb0777dbeb
Merge pull request #11248 from thinkyhead/bf1_tmc_unify_param_i 
[1.1.x] Unify "I" parameter for M906,M912 etc.
 2018-07-12 22:31:26 -05:00
Scott Lahteine
8f110190eb Add Z_CLEARANCE_MULTI_PROBE to example configs 2018-07-12 22:27:06 -05:00
nightgryphon
54adf6f52d Shorter Z up move between multiple probing attempts 
For some probes like micro switches the full Z clearance raise between
probing attempts is not required while bigger Z clearance between probe
points is still needed to avoid clamps. The shorter Z raise within
multiprobing same point significantly increase probing speed and the whole
auto level process.
 2018-07-12 22:27:06 -05:00
Clifford Roche
3b5c81b84a [1.1.x] Validate that X/Y_PROBE_OFFSET_FROM_EXTRUDER are integers (#11255) 2018-07-12 21:22:59 -05:00
Scott Lahteine
d8331d97d6 Unify M91x parameter I meaning, simplify reports 2018-07-11 20:31:40 -05:00
Scott Lahteine
5cddfce0ee Endstops::report_state => event_handler 2018-07-11 19:47:25 -05:00
Aaron Griffith
5f587126b9 Loosen static assertion guarding overflow in SCAN_THERMISTOR_TABLE (#11240) 
Bisect search merged in #10882 actually works fine for thermistor
tables with up to 255 entries with no overflow, due to C++ integer
promotion rules.

Closes issue #11220.
 2018-07-11 16:42:23 -05:00
Roxy-3D
39b3e4c501
Support for multiple Max7219 units in a chain (#11226) 
* Support for multiple Max7219 units in a chain

I'll move this support over to bugfix_2.0.0 in the next few days.   And
then look at updating the Max7219_idle() routine to make use of multiple
units in a chain.

* spelling correction
 2018-07-08 17:35:58 -05:00
Roxy-3D
fae2929b6b
Resolve issue where user can't edit mesh 2018-07-08 14:39:08 -05:00
Scott Lahteine
ccb225f43a
Float maths updates for 2.0.x parity (#11213) 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-07-06 21:44:33 -05:00
Scott Lahteine
fc9f4ce2c0 Fix missing quote in language list 
Co-Authored-By: p3p <p3p@p3psoft.co.uk>
 2018-07-04 13:40:18 -05:00
Scott Lahteine
a69cc6c5ba Fix Trigorilla include typo 2018-07-03 20:22:36 -05:00
Scott Lahteine
03a704600c
No M914 or SGT set for non-sensorless axes (#11197) 2018-07-03 20:10:43 -05:00
Scott Lahteine
fae20983eb Add configurations for Tronxy X3A 2018-07-03 18:14:46 -05:00
Marcel Schulz
432da42dba Add thermistor 501 (100K Zonestar) 2018-07-03 18:10:55 -05:00