MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
9,515 Commits 1 Branch 0 Tags 96 MiB
39d63b800c
Commit Graph

7867 Commits

Author SHA1 Message Date
Scott Lahteine
33b18dc801 Add Z_AFTER_PROBING to example configs 2018-03-11 09:48:03 -05:00
Scott Lahteine
0aa100a31e Add Z_AFTER_PROBING option 
Some fix-mounted probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
 2018-03-11 09:48:02 -05:00
Scott Lahteine
879b54a8bc
Auto-assign CS pins for X2, Y2, Z2 (#10056) 
Fixes #9211
 2018-03-11 09:25:02 -05:00
Scott Lahteine
d1256be7ec FlushSerialRequestResend => flush_and_request_resend 2018-03-11 07:34:21 -05:00
Scott Lahteine
eb6f44372e Finish scroll_screen, fixing direction/multiplier 
Fixes #10041
 2018-03-11 04:44:28 -05:00
Scott Lahteine
b0abce5a7e Disambiguate 'else' in stepper code 2018-03-10 21:47:08 -06:00
Scott Lahteine
72df10c669
Merge pull request #10038 from thinkyhead/bf1_dual_endstops_offsets 
[1.1.x] Dual XYZ endstops parity with 2.0.x
 2018-03-10 07:17:20 -06:00
Sebastianv650
b8f1b74abd [1.1.x] Silence M204 (#10036) 
`M204` is often used by slicers to set acceleration depending on perimeter, infill, etc., so Marlin's answers are flooding the serial windows. Silence `M204` according to the philosophy that setter commands should only send a reply if no parameter is given.
 2018-03-10 07:15:52 -06:00
Scott Lahteine
e8fc0e9a57 Move [xyz]_endstop_adj to Endstops class 2018-03-10 06:54:18 -06:00
Scott Lahteine
4b5a42f86a Tweaks to E2END, mesh slot offset 2018-03-10 06:54:18 -06:00
Scott Lahteine
83c83e3127 Update Marlin G-codes summary 2018-03-10 06:54:18 -06:00
Scott Lahteine
5ce64f6d16 Combine __AVR__ and USBCON for 2.0.x parity 2018-03-10 01:51:35 -06:00
Scott Lahteine
cce80fd41c Add UNKNOWN_Z_NO_RAISE to example configs 2018-03-09 23:11:35 -06:00
Scott Lahteine
1b79217fbc Add UNKNOWN_Z_NO_RAISE option 
With this option enabled, Z won't ever be raised until after `G28` has been completed, and it won't raise if Z becomes unknown. This is good for machines whose beds fall when Z is powered off.
 2018-03-09 23:11:35 -06:00
Scott Lahteine
192507b524 Move do_probe_raise closer to set_probe_deployed 
…and limit the raise to Z_MAX_POS
 2018-03-09 23:03:12 -06:00
Scott Lahteine
0d13c5d077 Fix position_is_reachable_by_probe, add comments 
Fix #10029
 2018-03-09 21:18:50 -06:00
Roxy-3D
fd3e243989
prevent steppers from turning off during manual probes 2018-03-09 17:54:41 -07:00
Scott Lahteine
12b697c5cd Fix UPDATE_ENDSTOP for CorePQ compatibility 
Fixes #9939
 2018-03-09 08:49:44 -06:00
Scott Lahteine
03676d8e2f Fix _tmc_say_axis string address 
Fixes #10003
 2018-03-09 06:07:52 -06:00
Scott Lahteine
3c6d2d7711 Add more delay before pulse off in Linear Advance ISR 
A capital idea from https://github.com/MarlinFirmware/Marlin/pull/9914#issuecomment-371614153
 2018-03-09 05:24:10 -06:00
Scott Lahteine
a9392c6b27 Set a safe default MINIMUM_STEPPER_PULSE of 2 2018-03-09 03:59:18 -06:00
Scott Lahteine
fa12866de3
Have position_is_reachable_by_probe use the whole bed (#10019) 
Previously `position_is_reachable_by_probe` was limited to the area specified for `G29` mesh leveling (even if leveling was disabled). This change will properly consider the entire bed area so that `G30` and other non-leveling probing may take place.
 2018-03-09 03:38:00 -06:00
Scott Lahteine
9508f9ec75 Fix: utility.h requires types.h 2018-03-09 03:33:25 -06:00
Scott Lahteine
beb7e2ed93 Allow servo.cpp to use safe_delay 2018-03-09 03:07:55 -06:00
Scott Lahteine
f24cdf1081
Add Einsy RAMBo board (#10018) 2018-03-09 01:40:34 -06:00
Scott Lahteine
ba1c2a9819 Update servo.* for parity with 2.0.x 2018-03-08 19:32:32 -06:00
Scott Lahteine
e5e3c3ff35
Update powersupply_on in power_on/off (#10014) 
Fix #10004
 2018-03-08 18:56:41 -06:00
Scott Lahteine
9c667b5436 Init old_red to 127 to ensure initial change 
Fix #10012
 2018-03-08 18:27:39 -06:00
Scott Lahteine
de8fbdea6d Init watchdog last in setup() 2018-03-08 17:36:01 -06:00
Scott Lahteine
282170a259 Tweak manual move eindex arg 2018-03-08 16:26:11 -06:00
Scott Lahteine
31980f01ba Wrap stepper_indirection macros in do{}while(0) 2018-03-08 16:23:49 -06:00
Scott Lahteine
dcd2fa9291 Fix compile error with MAX_MESSAGE_LENGTH 
Fix #9988
 2018-03-07 21:58:19 -06:00
Bob-the-Kuhn
179de4423d remove conditional download of custom character RAM 2018-03-07 17:50:18 -06:00
Scott Lahteine
d11ed30584 Fix compile error with char LCD 
Followup to f177da4
 2018-03-07 16:53:03 -06:00
Scott Lahteine
1381b5d57d Fix LA_active_extruder (static) 2018-03-07 05:50:35 -06:00
Scott Lahteine
63d6dddae1 Wrap stepper_indirection macros 2018-03-07 05:45:30 -06:00
Sebastianv650
e5d69d313c Fix for LA (#9965) 
Missed in the original LA 1.5 PR: eISR has to use a local copy of
current_block->use_advance_lead because it might still run wenn the last
block has been set to NULL.
 2018-03-07 05:32:49 -06:00
Scott Lahteine
f177da45bb Fix encoder position for sddirectory 2018-03-07 05:20:15 -06:00
Scott Lahteine
dc40b3ec00 Suspend auto-report during UBL map output 2018-03-07 01:58:37 -06:00
Scott Lahteine
e7d519c898 Add suspend_auto_report flag to suppress auto-report 2018-03-07 01:58:37 -06:00
Scott Lahteine
2bf1bbf399 Add HAS_TEMP_SENSOR conditional 2018-03-07 01:58:31 -06:00
Scott Lahteine
2d0d5eccd8 Move AUTO_REPORT_SD_STATUS to SDSUPPORT block 2018-03-07 01:58:31 -06:00
Scott Lahteine
1f77930e01
Rebuild SD file sort array on Stop SD Print (#9975) 
Thanks Chuck Hellebuyck.
 2018-03-07 01:42:30 -06:00
Scott Lahteine
1ed1882766 Strip extra newline 2018-03-07 00:22:31 -06:00
Scott Lahteine
dc733192be Add AUTO_REPORT_SD_STATUS to example configs 2018-03-07 00:06:17 -06:00
Scott Lahteine
fb9de6e787 Add AUTO_REPORT_SD_STATUS feature 
For parity with 2.0.x ahead of 1.1.9 release.
 2018-03-07 00:06:03 -06:00
Scott Lahteine
ecddd2a655 Make enums into implicit char 2018-03-06 23:36:56 -06:00
Scott Lahteine
fa998178e9 Move extended_axis_codes to PROGMEM 2018-03-06 22:20:35 -06:00
Scott Lahteine
73aa7ffff9 LIN_ADVANCE single stepper optimization 2018-03-06 19:27:43 -06:00
Scott Lahteine
50ad30259f Support duplication mode in LIN_ADVANCE 2018-03-06 19:12:54 -06:00