Commit Graph

107 Commits

Author SHA1 Message Date
Scott Lahteine
6f10d637ad Fix some compile warnings 2018-05-19 17:09:24 -05:00
Scott Lahteine
3505d018db Smarter MIN, MAX, ABS macros
Use macros that explicitly avoid double-evaluation and can be used for any datatype, replacing `min`, `max`, `abs`, `fabs`, `labs`, and `FABS`.

Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-05-13 04:51:33 -05:00
Scott Lahteine
ea353c3df6
Move some Stepper methods to Planner (#10719) 2018-05-12 09:29:17 -05:00
ManuelMcLure
ef9617fe44 [1.1.x] Use M_PI instead of PI (#10702) 2018-05-11 17:57:16 -05:00
ManuelMcLure
b7899610ac Use arc moves for G26 if enabled (#10695) 2018-05-11 01:53:15 -05:00
Scott Lahteine
ac5ff1d802 Adjust usage of stepper.synchronize 2018-05-06 01:22:30 -05:00
Scott Lahteine
1025066ab1 Add NO_LCD_MENUS to display only the Status Screen 2018-04-30 18:39:32 -05:00
Scott Lahteine
b19d8182c1
Add HAS_HEATED_BED conditional (#10494) 2018-04-22 23:40:49 -05:00
Scott Lahteine
ccb2a95456 Update includes for gcode.h => parser.h 2018-03-14 01:01:45 -05:00
Scott Lahteine
023d21a1cf Add SERIAL_FLUSH and SERIAL_FLUSHTX macros 2018-02-16 17:50:58 -06:00
Scott Lahteine
b56c6b9e13
Patch G26 circles (#9626)
Easier to configure. Catch an odd divisor.
2018-02-15 22:11:06 -06:00
Roxy-3D
b7e245036b
Fix a comment about M105 buffer over runs... 2018-02-14 17:49:50 -06:00
Roxy-3D
66370006bb
Fix G26 Circles... (#9638)
Will get this duplicated in bugfix_2.0.0 tomorrow...
2018-02-14 17:31:25 -06:00
Scott Lahteine
c93dab2307 MYSERIAL => MYSERIAL0
For cleaner diffing with Marlin 2.0.x.
2018-02-14 02:56:56 -06:00
Scott Lahteine
967bf41080 Add a proper comment for G26 2018-02-06 00:59:54 -06:00
Scott Lahteine
873fb84d27
Fix const mesh_index_pair in G26
Followup to #9493
2018-02-05 14:29:47 -06:00
GMagician
587e6b7c8d [1.1.x] Fix compiler error when G26 is enabled
Address #9491
2018-02-05 21:21:42 +01:00
Scott Lahteine
56d5c5b97a Misc. comments 2018-02-04 21:16:07 -06:00
Scott Lahteine
3bdd7b1ed3 Reduce trig table down to 6 floats 2018-02-03 19:16:42 -06:00
paierh
68cff5f245 Change G26 circle angles
Changed the start- and end-angles for circles in the mesh-validation-pattern to avoid crossing lines.

At the start-/end-point of the circles there is a small dot of filament on my printer.
When drawing lines after the circles the nozzle crashes into those dots and destroys the circles.
I solved this problem by rotating the start- and end-points by 45 degrees.
2018-02-02 05:24:31 -06:00
Roxy-3D
73565728c7
Further clean up for serial over run issue during long operations 2018-01-18 14:38:18 -06:00
Roxy-3D
cbdbeb3e69
PronterFace M105 work around (#9227)
PronterFace keeps sending M105 requests during long operations like G29 P1, G29 P2, G29 P4 and G26. The serial buffer fills up before the operation is complete. The problem is, a corrupted command gets executed. It is very typical for the M105 to turn into a M1 (actually... M1M105 is typical).

This causes the printer to say "Click to resume..."

This is a temporary fix until we figure out the correct way to resolve the issue.

More work needed for G26.
2018-01-17 22:51:19 -06:00
Roxy-3D
c11665e92f
Regression fixes for UBL's G29 P1, G29 P2, G29 P4 and G26 (#9213)
The changes to ultralcd.cpp for is_lcd_clicked() did not encompass the
full functionality of UBL's G29 P1, P2 and P4.   It also broke G26's
ability to abort in several of its phases.

This is the first pass at fixing the problem.   It has been tested for
correctness for several hours but more testing  needs to be done.
There may be a few follow up patches to finish covering all the corner
cases, but right now I need to merge this before any conflicts show up.

Some of these changes will need to be moved over to the bugfix-v2.0.0
branch.   That will happen a few days from now.
2018-01-17 00:27:50 -06:00
Scott Lahteine
e7bf7e6031 Make FWRetract class for 2.0.x parity 2018-01-04 17:54:24 -06:00
Scott Lahteine
e1b998e40a More externs and functions in Marlin.h 2017-12-15 18:18:26 -06:00
Scott Lahteine
a20eacaa48 UBL devel debugging flag 2017-12-11 00:20:29 -06:00
Scott Lahteine
6e8da93c42 UBL_DELTA => UBL_SEGMENTED 2017-12-11 00:20:29 -06:00
Scott Lahteine
1951d3a37a Simplify G26 user_canceled 2017-12-06 22:03:46 -06:00
Scott Lahteine
1063b3b2b8 Changes for parity with 2.0.x 2017-12-06 21:19:17 -06:00
Scott Lahteine
ff26b7446c Standardize LCD interface code for UBL a little 2017-12-06 21:12:55 -06:00
Scott Lahteine
7b6ad28a5d General UBL/G26 code cleanup 2017-12-06 21:12:55 -06:00
Scott Lahteine
5d01a2f467 Move temperature reporting to Temperature class 2017-12-06 21:12:55 -06:00
Scott Lahteine
1e84cded98 Parity with 2.0.x bitmap functions
Based on #8565
2017-11-25 19:56:22 -06:00
Scott Lahteine
bb0cc1bbbc Fix gcode_G26 error return 2017-11-25 19:51:03 -06:00
Scott Lahteine
3b431f2f72 Arrange G26 functions in dependency order 2017-11-23 22:30:22 -06:00
Roxy-3D
8282d732c1 Make G26 work with all mesh leveling.
Example Configuration.h files are not updated yet.   You need to cross
your settings over to the default Configuration.h file in the \Marlin
directory.   (UBL_G26_MESH_VALIDATION enablement has moved to a new
location in the file.)
2017-11-23 21:41:27 -06:00
Scott Lahteine
56035e9965 Move mesh test options under G26 option 2017-11-13 21:06:40 -06:00
Scott Lahteine
97a43f0c2f
Fix G26 Y position argument 2017-11-08 19:19:21 -06:00
Roxy-3D
677d490b5c
Add defaults for basic extrusion to Configuration.h files (#8331) 2017-11-08 11:02:47 -06:00
Scott Lahteine
640526f0c8 Operate in Native Machine Space 2017-11-03 22:40:30 -05:00
Roxy-3D
e9bc9a2ab4 change to better (more clear) names (#8049)
set_destination_to_current() changed to set_destination_from_current()

set_current_to_destination() changed to set_current_from_destination()
2017-10-21 10:58:17 -05:00
deram
9239fcf0da Allow UBL G29 and G26 to build without a probe 2017-10-09 18:37:53 -05:00
cdedwards
f1843211e6 Fix for G26 spam output
while heating, G26 will continuously spam the heater states instead of printing it out every 5000ms.
2017-08-15 17:04:53 -06:00
Scott Lahteine
0873c667fa Apply coding standards to recent merges 2017-07-13 00:46:16 -05:00
Bob-the-Kuhn
fcceed5be6 intermittent Teensy & G26 compile problem
===============================================

also an issue with ubl_motion.cpp
2017-07-01 14:41:24 -05:00
Scott Lahteine
05449cf6ee Add shorthand value accessors to gcode.h 2017-06-27 18:39:41 -05:00
Scott Lahteine
12f092c812 Cleanups to gcode.h, use seenval() 2017-06-27 17:57:00 -05:00
Scott Lahteine
6c45d0fd81 Apply maths macros and type changes ahead of HAL 2017-06-19 22:57:42 -05:00
Bob-the-Kuhn
9dda022705 fix compile errors
================================

Changed to conditional compile for AT90USB issue
2017-06-15 13:18:14 -05:00
Scott Lahteine
57a51fd5db Tweak some else clauses 2017-06-10 16:40:10 -05:00