MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
10,091 Commits 1 Branch 0 Tags 96 MiB
7b0a8e85ba
Commit Graph

8400 Commits

Author SHA1 Message Date
Shen Yiming
7b0a8e85ba Fix pca9632_set_led_color lost i2c connection (#11530) 2018-08-12 18:05:00 -05:00
Scott Lahteine
77625654f4 Reduce max accel in Creality configs 2018-08-11 22:57:44 -05:00
Scott Lahteine
bdb2dd27ad Allow G33 to compile with no LCD 2018-08-11 22:45:04 -05:00
Scott Lahteine
f1467ddc0e UBL/planner patch tweaks 2018-08-11 22:45:04 -05:00
Thomas Moore
105d20c2e8 Account for UBL correction when setting the planner position (#11511) 2018-08-10 13:00:45 -05:00
Scott Lahteine
9e46e84a55
Treat TMC2660 like non-TMC (#11485) 2018-08-10 00:30:11 -05:00
Scott Lahteine
4f59ee8978 Minor spacing fixes 2018-08-07 14:00:48 -05:00
Scott Lahteine
e741241721 No raise when homing after power-loss 2018-08-07 13:50:33 -05:00
Scott Lahteine
332a80cadb Restore bugfix README, etc. 2018-08-07 13:45:03 -05:00
lsellens
614a944504 auto power control without heated bed (#11467) 
`AUTO_POWER_CONTROL` will not work if printer has no heated bed due to `degTargetBed()` not being defined
 2018-08-06 23:18:13 -05:00
Giuliano
33364c17b9 [1.1.x] Better timing handling (#11462) 2018-08-06 23:14:11 -05:00
Scott Lahteine
b8d4c4216f
Easier to disable homing validation (#11457) 2018-08-06 23:11:28 -05:00
Scott Lahteine
86d9af1108
Fix drivers.h dependency, defer macro evaluation (#11449) 2018-08-03 21:48:57 -05:00
silentninja1
4c4fffc503 [1.1.x] Fix Dual X Carriage tool change crash (#11425) 2018-08-03 20:47:19 -05:00
Marcio Teixeira
fae96a6a13 Fix jumping progress bar. (#11438) 
- When `LCD_SET_PROGRESS_MANUALLY` was disabled and an SD print was not active (i.e. the printer was idle), progress_bar_percent would read uninitialized memory from stack and cause progress bar to jump wildly.
- Also updated conditions in `#ifdef` to match `ultralcd.cpp`
 2018-08-03 17:16:14 -05:00
Roxy-3D
7d491aa015 Tiny improvement to M7219 
The registers within the Max7219 can get corrupted a number of ways.  This allows the Max7219 to be reset and fully initialized.
And...  it also allows the user to see the initialization pattern.
 2018-08-02 18:43:36 -05:00
Scott Lahteine
888d319145 Align some config options 2018-08-02 18:42:20 -05:00
MikeLud
a2ac7e1407 Add M915 to Prepare Menu (#11383) 2018-07-31 02:03:49 -05:00
Shen Yiming
8db91f0bd1 Clean up 12864 OLED code (#11388) 2018-07-30 23:02:12 -05:00
Scott Lahteine
c4f4c255b4
Fix initial safe_speed in jerk code (#11396) 2018-07-30 22:49:20 -05:00
Roxy-3D
33c37d587d
Revert "[1.1.x] idex and bl touch fix" (#11406) 
* Revert "[1.1.x] bltouch home refinements (#11398)"

This reverts commit 30839a6ba6.

* Revert "[1.1.x] idex and bl touch fix (#11392)"

This reverts commit e1bef0ea79.
 2018-07-28 23:14:41 -05:00
Giuliano
30839a6ba6 [1.1.x] bltouch home refinements (#11398) 
Just create a better functions call logic flow
 2018-07-28 19:29:26 -05:00
silentninja1
e1bef0ea79 [1.1.x] idex and bl touch fix (#11392) 
* [1.1.x] IDEX and BLTouch Fixes

Fix bltouch not deploying during fast home, fix dual x carriage setting opposing side park position as destination on tool change

* Update Marlin_main.cpp

* Update Marlin_main.cpp

* Change brackets to be more in conformance with Marlin coding standards
 2018-07-28 10:33:35 -05:00
Giuliano
7284488da3 [1.1.x] fix bltouch homing (#11380) 
Partially revert. Seems to solve the issue, but one report says G29 still fails.
 2018-07-27 18:29:26 -05:00
Scott Lahteine
cab2e0877e Update DELAY_10US 2018-07-26 20:21:50 -05:00
bleughb
b6f24992ee [1.1.x] Update fastio_1280.h pin mapping comments (#11374) 2018-07-26 05:19:05 -05:00
Scott Lahteine
c30f636d22
Improve drivers.h macros (#11372) 2018-07-26 05:10:11 -05:00
Giuliano
2f76ec5c6a [1.1.x]-different-bltouch-init (#11358) 2018-07-26 05:03:39 -05:00
Scott Lahteine
56fbe3361b
Ensure ADC conversion is complete before reading (#11370) 
Co-Authored-By: gloomyandy <andy-git@gloomy-place.com>
 2018-07-26 03:58:33 -05:00
vitekn
b5ed4a1a8c Fix thermistor type in Anet A6 config (#11346) 
I have Anet a6 and my thermistor is NTC 3950. If the default is 5 (ATC Semitec 104GT-2) it gives overheat upto 330 degrees (real) instead of 250 (displayed). I don't know for sure if all the A6 have such thermistor but I think it's safer to have underheat than overheat. And 3950 looks more spread among A6 searching on Internet. The same is true for the bed though it has small difference at the beginning of scale, actually +-2 degrees.
 2018-07-26 02:03:30 -05:00
Scott Lahteine
2af06b82b4 Specify some extra CR-10S pins 2018-07-25 18:18:33 -05:00
Scott Lahteine
637489ae17 Tweak some SoftPWM code 2018-07-25 18:16:33 -05:00
Scott Lahteine
349cf3ee5a Sync enqueue_and_echo_command with 2.0.x 2018-07-25 18:06:31 -05:00
Giuliano
e5b928f574 [1.1.x] Typo fix (#11366) 
Typo fix
 2018-07-25 18:00:28 -05:00
Scott Lahteine
7bad507d70 Simplify stepper driver config 2018-07-25 03:02:12 -05:00
Scott Lahteine
6d6bdc6517 Add *_DRIVER_TYPE to example configs 2018-07-25 02:39:16 -05:00
silentninja1
57ce81f067 [1.1.x] Fix LCD axis move E index (#11328) 2018-07-25 02:21:05 -05:00
Scott Lahteine
ed0e72bf44 Fix spelling in configs 2018-07-24 21:02:22 -05:00
silentninja1
060e7a3565 Silentninja1 idex crash fix (#11329) 
* Move home all axis prototype to allow access from UBL.h

* Remove home all axis command as it exists in marlin.h now

* Reverse order of tool change and home

Race condition causes E0 carriage to move on E1 commands and crash into parked head if order is reversed. Needs more research into permanent fix, but this will prevent damage to machines in the meantime.
 2018-07-24 14:44:50 -05:00
Scott Lahteine
3bbb121e7d Tweak some Max7219 code 2018-07-19 18:51:35 -05:00
Scott Lahteine
d1590fec3e
Merge pull request #11308 from thinkyhead/bf1_manual_probe_start_z 
[1.1.x] Manual Z Start Height
 2018-07-19 18:26:51 -05:00
Roxy-3D
6c62b0e263
Change Max7219_idle_task() to use columns if Y-Axis has 16 LED's (#11317) 2018-07-19 16:59:38 -05:00
Scott Lahteine
221e8bbb05 Add MANUAL_PROBE_START_Z to example configs 2018-07-18 21:50:18 -05:00
Scott Lahteine
888774cbc3 Add MANUAL_PROBE_START_Z for manual probing 2018-07-18 21:50:18 -05:00
Scott Lahteine
db057eb453 Fix tool_change call in UBL G29 
Fix #11279, #11252
 2018-07-18 20:35:14 -05:00
Scott Lahteine
5ce312f158
Merge pull request #11305 from thinkyhead/bf1_power_loss_pin 
[1.1.x] Add support for power loss detect pin
 2018-07-18 20:13:47 -05:00
Scott Lahteine
389f2ac81f planner.synchronize at start of tool_change 
See https://github.com/MarlinFirmware/Marlin/issues/10949#issuecomment-398540498
 2018-07-18 20:09:39 -05:00
Scott Lahteine
7321f30ac0 Add POWER_LOSS_PIN support 2018-07-18 19:58:06 -05:00
Scott Lahteine
46b0e054b1 Add POWER_LOSS_PIN to example configs 2018-07-18 19:58:06 -05:00
Giuliano
9d0627d66c Make GCodeParser::debug static (#11294) 2018-07-17 23:38:39 -05:00