Commit Graph

10109 Commits

Author SHA1 Message Date
srieche
99393550f2 [1.1.x] Silently drop M108, M112 and M410 with emergency parser enabled (#11666) 2018-08-28 20:48:31 -05:00
Scott Lahteine
4f0737cd2c Fix SD percent for Lite Status Screen
Co-Authored-By: Lê Hoàng <icy.lord.love.angel@gmail.com>
2018-08-26 17:13:58 -05:00
Scott Lahteine
cf1b2af71a Update Ultimaker servo pin
As pointed out at https://github.com/MarlinFirmware/Marlin/issues/7981#issuecomment-407116642
2018-08-21 11:38:45 -05:00
Scott Lahteine
903ccb4b60 Always disable/restore leveling on tool-change
Counterpart to #11559 and its followup.

Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
2018-08-21 09:13:36 -05:00
Scott Lahteine
b303affbb0 Fix typo in .travis.yml 2018-08-21 07:55:00 -05:00
Scott Lahteine
3f75c5df7c Fix Homing/UBL
Co-Authored-By: smoki3 <kevinbayer8@gmail.com>
2018-08-21 07:49:13 -05:00
Scott Lahteine
e5de565987
Fix up Max7219 orientations (#11597) 2018-08-20 20:31:40 -05:00
Scott Lahteine
feb55517af
[1.1.x] Max7219 cleanup, simplify, and extend (#11574) 2018-08-18 01:48:28 -05:00
Scott Lahteine
2f2f16c340 Marlin assumes signed chars 2018-08-16 21:18:20 -05:00
Roxy-3D
3ef6cf0bfb
declare void Max7219_register_setup(); 2018-08-15 10:39:08 -05:00
Scott Lahteine
5f0798544e Update Czech language
Co-Authored-By: petrzjunior <junior@zahradnik.cz>
2018-08-14 18:47:24 -05:00
teemuatlut
b4efefea8b [1.1.x] Fix TMC2208 SW serial communication (#11548)
* New TMC2208 constructor
* Update default driver configuration
2018-08-14 18:44:17 -05:00
Roxy-3D
e518533a75
Change M7219 I to setup Max7219 registers, but not do initialization pattern 2018-08-13 17:48:17 -05:00
Roxy-3D
02381d6821
Make M7219 I more robust and nicer to look at 2018-08-13 17:05:13 -05:00
Roxy-3D
263beae3e9 Add I parameter to ignore pin protection on M42 2018-08-13 16:50:24 -05:00
Scott Lahteine
cc6a31528d Improve AXIS_DRIVER_TYPE macros 2018-08-13 16:50:24 -05:00
Aaron Griffith
5482af38f0 Remove oversampled data from thermistor table 71 (#11504)
Data in Table 71 is extremely oversampled (see Issue #11220). I have removed the data points that perform *worse* than linearly interpolating the remaining points, and fixed up two points that were simply rounded incorrectly.
2018-08-13 02:52:48 -05:00
Scott Lahteine
a9cb4834da Allow Einsy RAMBo FAN1_PIN override 2018-08-13 02:48:25 -05:00
Shen Yiming
7b0a8e85ba Fix pca9632_set_led_color lost i2c connection (#11530) 2018-08-12 18:05:00 -05:00
Scott Lahteine
77625654f4 Reduce max accel in Creality configs 2018-08-11 22:57:44 -05:00
Scott Lahteine
bdb2dd27ad Allow G33 to compile with no LCD 2018-08-11 22:45:04 -05:00
Scott Lahteine
f1467ddc0e UBL/planner patch tweaks 2018-08-11 22:45:04 -05:00
Thomas Moore
105d20c2e8 Account for UBL correction when setting the planner position (#11511) 2018-08-10 13:00:45 -05:00
Scott Lahteine
9e46e84a55
Treat TMC2660 like non-TMC (#11485) 2018-08-10 00:30:11 -05:00
Scott Lahteine
4f59ee8978 Minor spacing fixes 2018-08-07 14:00:48 -05:00
Scott Lahteine
e741241721 No raise when homing after power-loss 2018-08-07 13:50:33 -05:00
Scott Lahteine
332a80cadb Restore bugfix README, etc. 2018-08-07 13:45:03 -05:00
lsellens
614a944504 auto power control without heated bed (#11467)
`AUTO_POWER_CONTROL` will not work if printer has no heated bed due to `degTargetBed()` not being defined
2018-08-06 23:18:13 -05:00
Giuliano
33364c17b9 [1.1.x] Better timing handling (#11462) 2018-08-06 23:14:11 -05:00
Scott Lahteine
b8d4c4216f
Easier to disable homing validation (#11457) 2018-08-06 23:11:28 -05:00
Scott Lahteine
86d9af1108
Fix drivers.h dependency, defer macro evaluation (#11449) 2018-08-03 21:48:57 -05:00
silentninja1
4c4fffc503 [1.1.x] Fix Dual X Carriage tool change crash (#11425) 2018-08-03 20:47:19 -05:00
Marcio Teixeira
fae96a6a13 Fix jumping progress bar. (#11438)
- When `LCD_SET_PROGRESS_MANUALLY` was disabled and an SD print was not active (i.e. the printer was idle), progress_bar_percent would read uninitialized memory from stack and cause progress bar to jump wildly.
- Also updated conditions in `#ifdef` to match `ultralcd.cpp`
2018-08-03 17:16:14 -05:00
Roxy-3D
7d491aa015 Tiny improvement to M7219
The registers within the Max7219 can get corrupted a number of ways.  This allows the Max7219 to be reset and fully initialized.
And...  it also allows the user to see the initialization pattern.
2018-08-02 18:43:36 -05:00
Scott Lahteine
888d319145 Align some config options 2018-08-02 18:42:20 -05:00
MikeLud
a2ac7e1407 Add M915 to Prepare Menu (#11383) 2018-07-31 02:03:49 -05:00
Shen Yiming
8db91f0bd1 Clean up 12864 OLED code (#11388) 2018-07-30 23:02:12 -05:00
Scott Lahteine
c4f4c255b4
Fix initial safe_speed in jerk code (#11396) 2018-07-30 22:49:20 -05:00
Roxy-3D
33c37d587d
Revert "[1.1.x] idex and bl touch fix" (#11406)
* Revert "[1.1.x] bltouch home refinements (#11398)"

This reverts commit 30839a6ba6.

* Revert "[1.1.x] idex and bl touch fix (#11392)"

This reverts commit e1bef0ea79.
2018-07-28 23:14:41 -05:00
Giuliano
30839a6ba6 [1.1.x] bltouch home refinements (#11398)
Just create a better functions call logic flow
2018-07-28 19:29:26 -05:00
silentninja1
e1bef0ea79 [1.1.x] idex and bl touch fix (#11392)
* [1.1.x] IDEX and BLTouch Fixes

Fix bltouch not deploying during fast home, fix dual x carriage setting opposing side park position as destination on tool change

* Update Marlin_main.cpp

* Update Marlin_main.cpp

* Change brackets to be more in conformance with Marlin coding standards
2018-07-28 10:33:35 -05:00
Giuliano
7284488da3 [1.1.x] fix bltouch homing (#11380)
Partially revert. Seems to solve the issue, but one report says G29 still fails.
2018-07-27 18:29:26 -05:00
Scott Lahteine
cab2e0877e Update DELAY_10US 2018-07-26 20:21:50 -05:00
bleughb
b6f24992ee [1.1.x] Update fastio_1280.h pin mapping comments (#11374) 2018-07-26 05:19:05 -05:00
Scott Lahteine
c30f636d22
Improve drivers.h macros (#11372) 2018-07-26 05:10:11 -05:00
Giuliano
2f76ec5c6a [1.1.x]-different-bltouch-init (#11358) 2018-07-26 05:03:39 -05:00
Scott Lahteine
56fbe3361b
Ensure ADC conversion is complete before reading (#11370)
Co-Authored-By: gloomyandy <andy-git@gloomy-place.com>
2018-07-26 03:58:33 -05:00
vitekn
b5ed4a1a8c Fix thermistor type in Anet A6 config (#11346)
I have Anet a6 and my thermistor is NTC 3950. If the default is 5 (ATC Semitec 104GT-2) it gives overheat upto 330 degrees (real) instead of 250 (displayed). I don't know for sure if all the A6 have such thermistor but I think it's safer to have underheat than overheat. And 3950 looks more spread among A6 searching on Internet. The same is true for the bed though it has small difference at the beginning of scale, actually +-2 degrees.
2018-07-26 02:03:30 -05:00
Scott Lahteine
5061c3a016
Merge pull request #11368 from thinkyhead/bf1_pwm_adjustments
[1.1.x] Tweak some SoftPWM code
2018-07-25 19:02:10 -05:00
Scott Lahteine
2af06b82b4 Specify some extra CR-10S pins 2018-07-25 18:18:33 -05:00