GMagician
7a5b3a1e6a
[1.1.x] Tool change bad behaviour fix
...
Just aligned with version 2.0. Here bug was not present
2017-11-22 23:51:07 +01:00
Scott Lahteine
e2568d7589
Fix delta_safe_distance_from_top
2017-11-22 14:11:04 -06:00
Scott Lahteine
0b1d754e7d
Fix G42
2017-11-22 14:11:04 -06:00
Scott Lahteine
bbc2ee6da1
Don't re-init graphical LCD after boot screen
...
Followup to 13a3fb1acc
2017-11-21 18:21:50 -06:00
GMagician
b96ceb4256
[1.1.x] tool change bad behaviours
...
This PR will address two issues reported in #8492 . Just one is left because I don't know if it is an issue or not
1) when no home is done ("no_move" is set) tool change should never move X & Y because... I don't know where I am...only Z should be adjusted to avoid bed collision if other nozzle is lower than current.
2) Since no move no bed level matrix should be applied
When SWITCHING_NOZZLE is enabled and system is homed there are two movements to go to destination, but first can move Z to older position and then crash on the bed
2017-11-20 16:39:32 -06:00
Scott Lahteine
b6dbc4c5c1
Merge pull request #8426 from SteveGotthardt/bugfixes
...
[1.1.x]Update Anet A8 default values from my Anet A8 experience
2017-11-20 15:12:46 -06:00
Bob-the-Kuhn
12b018e619
Merge pull request #8487 from Bob-the-Kuhn/M43-compatibility-1.1.x
...
[1.1.x] M43 end pin correction/compatibility
2017-11-19 11:01:10 -06:00
Bob-the-Kuhn
9b80e1e04a
change to L for end pin for M43 Toggle command
2017-11-18 13:48:53 -06:00
Scott Lahteine
bf6a1816b4
Display volumetric ratio in terms of E mm
2017-11-18 07:03:18 -06:00
Scott Lahteine
4f05a66ee1
Fixes #8472
2017-11-18 05:14:31 -06:00
Scott Lahteine
622d100c30
No retroactive changes with M851 Z
2017-11-18 03:37:07 -06:00
Scott Lahteine
74997a5251
Fix comment in planner.h
2017-11-18 02:30:41 -06:00
Roxy-3D
50148f7185
Update the UBL Probable Area for Delta's
...
This is a non-intuitive change. @oldmcg says in this post https://github.com/MarlinFirmware/Marlin/issues/7572#issuecomment-340641207 that using DELTA_PRINTABLE_RADIUS is better than DELTA_PROBABLE_RADIUS for setting the probe limits. This is because the automatic probe code checks all locations for being reachable by the probe prior to doing the probe.
2017-11-17 16:41:31 -06:00
Scott Lahteine
8f57a3e28a
Apply coding standards to Max7219 code
2017-11-17 15:33:55 -06:00
Scott Lahteine
2511e869e2
Update Configuration.h
2017-11-16 23:18:55 -06:00
Scott Lahteine
aa612124f2
Merge pull request #8452 from tcm0116/1.1.x-pio_deps
...
[1.1.x] Fix PlatformIO dependencies
2017-11-16 22:54:15 -06:00
Scott Lahteine
eb3bdb7550
Fix FILAMENT_LCD_DISPLAY, disabled state, optimize
2017-11-16 17:46:08 -06:00
Thomas Moore
97c19de8b9
Fix PlatformIO dependencies
2017-11-16 15:16:21 -06:00
Scott Lahteine
4e19c59ab3
Miscellaneous cleanup
2017-11-16 01:18:05 -06:00
Scott Lahteine
9cf5b96971
Fix M503 output for M145
...
Fixes #7978
2017-11-15 04:00:39 -06:00
Scott Lahteine
69a710fef1
Add OV() macro for thermistor tables
2017-11-15 03:20:36 -06:00
Scott Lahteine
d2613ce077
Merge pull request #8432 from thinkyhead/bf1_fix_M32_subroutines
...
[1.1] Fix 'M32 P' subroutines
2017-11-15 02:31:21 -06:00
Scott Lahteine
f2e222b9e8
Merge pull request #8419 from RowanMeara/rm-dithering-1.1.x
...
[1.1.x] Fix Software Fan PWM
2017-11-15 02:29:59 -06:00
Scott Lahteine
a6ee4a0468
Apply SDCARD_SORT_ALPHA changes from 2.0.x
2017-11-15 01:09:13 -06:00
Scott Lahteine
d3b8f30818
Fix M32 P subroutine handling
2017-11-15 01:09:06 -06:00
Scott Lahteine
2390f6d3ab
Cleanup, apply standards to SD lib, cardreader
2017-11-15 01:09:06 -06:00
Scott Lahteine
eacb6b6e8b
Fix parser value handling
2017-11-14 23:23:22 -06:00
Steven Gotthardt
7efffc1548
Update Anet A8 default values from my Anet A8 experience
2017-11-14 10:47:30 -07:00
RowanMeara
10e366ebd7
Change dithering behavior to intended.
2017-11-14 00:36:35 -08:00
Scott Lahteine
95590adf07
Make sure leveled[] is enabled for use
2017-11-14 02:12:20 -06:00
Scott Lahteine
8d06cf7b84
Add M114_DETAIL to Configuration_adv.h
2017-11-14 00:06:35 -06:00
Steven Gotthardt
645b586041
Fix warnings for REPRAPWORLD_KEYPAD
2017-11-13 22:25:17 -06:00
Scott Lahteine
069ec3f9a9
Move Filament Width Sensor to Configuration_adv.h
2017-11-13 21:06:40 -06:00
Scott Lahteine
56035e9965
Move mesh test options under G26 option
2017-11-13 21:06:40 -06:00
Scott Lahteine
d65c99f38b
Drop unused LARGE_FLASH option
2017-11-13 15:47:03 -06:00
Scott Lahteine
90c7d28055
Extrudrboard support for Printrboard Rev.F
2017-11-13 15:47:03 -06:00
Scott Lahteine
8b684637bc
Merge pull request #8397 from RowanMeara/rm-M428-1.1.x
...
[1.1.x] Fix M428
2017-11-13 15:11:36 -06:00
Rowan Meara
d2df00bfca
[1.1.x] Fix compilation warnings ( #8395 )
...
* Fix up Travis CI and compile warnings/errors
* No ULTRA_LCD with REPRAP_DISCOUNT_SMART_CONTROLLER
* No point in setting all the endstop plugs
2017-11-13 04:18:19 -06:00
Scott Lahteine
25ec0fecfa
Apply native workspace fixes to G92, G53-59
2017-11-13 01:53:44 -06:00
RowanMeara
227b96b28b
Fix M428
...
This fixes the old implementation of M428 which was broken, did not
match the website, and made no sense.
2017-11-13 01:34:43 -06:00
Scott Lahteine
a2c013c8c7
Fix LCD pins for Printrboard v1
2017-11-13 00:10:27 -06:00
Scott Lahteine
f27196214b
Fix Printrboard pins for parity with 2.0
2017-11-13 00:03:11 -06:00
Scott Lahteine
aa616cd410
No leveling data in M114 without leveling
2017-11-12 23:06:16 -06:00
Scott Lahteine
5926159890
Fix report_current_position
...
Thanks @RowanMeara!
2017-11-12 22:57:57 -06:00
Roxy-3D
c9f88297b8
Provide more clearance for BL-Touch probe
2017-11-12 13:09:10 -06:00
Scott Lahteine
5cc87abb3a
Merge pull request #8381 from thinkyhead/bf1_native_followup
...
[1.1] Remove offsets from soft endstops, tool change
2017-11-11 23:13:40 -06:00
Scott Lahteine
355dfed437
Coding standard patch of M290
2017-11-11 22:16:13 -06:00
Scott Lahteine
802ae73b13
Turn off laser power pin when PWM goes to 0
2017-11-11 22:02:19 -06:00
Scott Lahteine
549c814e8d
Remove offsets from soft endstops, tool change
2017-11-11 21:28:32 -06:00
Scott Lahteine
564fbc8dec
M290 constrain patch
2017-11-11 20:50:16 -06:00
Scott Lahteine
df44bcc5ae
Use do_blocking_move_to where possible
2017-11-10 20:37:41 -06:00
Scott Lahteine
3293823642
Add pre-calculated planner.e_factor
2017-11-10 20:09:59 -06:00
Scott Lahteine
24b302c001
Fix cold/lengthy extrusion handling
2017-11-10 20:09:59 -06:00
Thomas Moore
4714fb8fcb
Normalize load/unload length in M600
2017-11-10 19:59:26 -06:00
Scott Lahteine
b0ff3a4c6d
Cleanup around updatePID
2017-11-10 19:17:46 -06:00
Scott Lahteine
7aadfe32e7
Prevent position_is_reachable disaster
2017-11-10 19:17:45 -06:00
LVD-AC
8ce9306b27
PROBE_SELECTED etc.
2017-11-10 19:17:45 -06:00
Scott Lahteine
80682ec61e
Updates Traditional Chinese, rebase for bugfix-1.1.x
2017-11-10 04:49:09 -06:00
Scott Lahteine
deaa70c2cc
Update macros for parity with 2.0.x
2017-11-10 04:32:27 -06:00
Scott Lahteine
7535c21894
Remove some trailing white-space
2017-11-10 03:38:58 -06:00
Roxy-3D
8327667988
Correct gMax 1.5+ nozzle size to the right number
...
Also... Doing a 'Direct Commit' to see if that is 'acceptable' for small changes like this. I want to look at the commit history and see how the logs handle this type of change.
2017-11-09 20:00:55 -06:00
Scott Lahteine
b6b4bf0959
Merge pull request #8345 from tcm0116/1.1.x-delta_height
...
[1.1.x] Add delta_height variable in lieu of using home_offset
2017-11-09 01:19:48 -06:00
Thomas Moore
658e1ebe5a
Add delta_height variable in lieu of using home_offset
2017-11-08 23:21:02 -06:00
Scott Lahteine
54963cc898
Fix _manual_goto_xy on kinematic systems
2017-11-08 23:18:55 -06:00
Scott Lahteine
ad879a1f90
Clarify some motion code
2017-11-08 23:18:55 -06:00
Scott Lahteine
513f25d42c
Remove redundant dual stepper driver entries
2017-11-08 20:26:54 -06:00
Scott Lahteine
2559745f54
Tweaks to core motion code
2017-11-08 20:08:20 -06:00
Scott Lahteine
7326fe1136
Fix tilt_mesh_based_on_probed_grid output bug
2017-11-08 20:07:02 -06:00
Scott Lahteine
97a43f0c2f
Fix G26 Y position argument
2017-11-08 19:19:21 -06:00
Scott Lahteine
87b655e59e
Fix gcode_get_destination E axis
2017-11-08 12:50:40 -06:00
Roxy-3D
677d490b5c
Add defaults for basic extrusion to Configuration.h files ( #8331 )
2017-11-08 11:02:47 -06:00
Roxy-3D
6ee4ba6932
We need motion even with !HAS_MESH ( #8330 )
...
Thank You MagoKimbra !
2017-11-08 09:58:18 -06:00
Scott Lahteine
4a857f1af6
Followup to G33/LCD patch #8318
2017-11-08 00:46:30 -06:00
Scott Lahteine
1d0739d6d1
Patch G33 misuse of PROBE_MANUALLY
2017-11-07 22:28:54 -06:00
Scott Lahteine
69a7d4e0a5
Conditionals updates from #7979
2017-11-07 21:20:38 -06:00
Scott Lahteine
5fe15c7f10
Patch abuse of sprintf_P in G33
2017-11-07 17:35:32 -06:00
Rowan Meara
094bebcc2d
[1.1.x] Update Thermal Protection Documentation ( #8282 )
...
* Fix thermal protection documentation.
Even before the recent thermal protection changes, the documentation of
the thermal protection feature in the config files did not match the
implementation. I fixed the documentation and reconciled the M303
implementation with the documentation.
* Applied documentation changes to sample config files
* Renamed hysteresis to watch_temp_increase
* Added gcodes back into documentation.
2017-11-07 15:52:28 -06:00
Scott Lahteine
abb15bc30a
Followup patch for G92
2017-11-07 13:08:38 -06:00
Scott Lahteine
8e18e05d1d
Merge pull request #8309 from thinkyhead/bf1_fixes_for_117
...
[1.1] Fix G92 for native workspace
2017-11-07 12:52:55 -06:00
Scott Lahteine
aa80882bdf
Merge pull request #8306 from Kaibob2/patch-4
...
Length fix and translation
2017-11-07 12:27:37 -06:00
Scott Lahteine
e4466b55b5
Fix G92 for native workspace
2017-11-07 12:27:05 -06:00
Kai
b60efb4230
Length fix and translation
...
If #define MSG_Z_FADE_HEIGHT is xx.xx then the last character is crashing into the value
2017-11-07 18:16:30 +01:00
Thomas Moore
2f4a42b313
Fix Delta EEPROM
2017-11-07 16:55:06 +00:00
Scott Lahteine
e1ab285435
Fix some section sizes in EEPROM head comment
2017-11-06 22:41:27 -06:00
Scott Lahteine
26ebeadfaa
Eliminate some compiler warnings
2017-11-06 22:41:27 -06:00
Scott Lahteine
30e4b85587
Fix M118 parameters, with strict guideline
2017-11-06 22:41:27 -06:00
Scott Lahteine
44edffa0a9
Fix SLOW_PWM_HEATERS, issues already patched in 2.0.x
2017-11-06 22:40:44 -06:00
Scott Lahteine
ddf5d68815
Fix non-extended font option
2017-11-06 21:43:18 -06:00
Scott Lahteine
298863c2d0
Tweak an EEPROM loop
2017-11-06 20:16:57 -06:00
Rowan Meara
8e8787ad63
Fixed EEPROM CRC ( #8283 )
...
Fix EEPROM reversion.
2017-11-06 19:18:42 -06:00
Roxy-3D
12151e62ee
Fix G26's circle drawing... ( #8291 )
...
* Fix G26's circle drawing...
This mostly catches the bugfix-v1.1.x branch up to bugfix-v2.0.0
I'll have to do something similar to get bugfix-v2.0.0 caught up to
bugfix-v1.1.x
* only use planner.leveling_active if appropriate
2017-11-06 18:26:47 -06:00
Scott Lahteine
efc1029226
Update bilinear for native workspace
2017-11-06 17:03:34 -06:00
Scott Lahteine
1b09733e7c
Fix FWRETRACT un-hop
2017-11-05 18:33:10 -06:00
Scott Lahteine
d8ef9bda18
Fix point_t pointer in Nozzle::zigzag
2017-11-05 18:32:32 -06:00
Scott Lahteine
267c247da7
Cleanup Nozzle class, fix XY vs Z move order
2017-11-05 18:14:18 -06:00
Scott Lahteine
8ab368559a
Implement CNC_COORDINATE_SYSTEMS
2017-11-04 22:30:23 -05:00
Scott Lahteine
bb111b928b
Add CNC_COORDINATE_SYSTEMS to configs
2017-11-04 22:30:23 -05:00
Scott Lahteine
91abf07087
Cleanup and fix G33
2017-11-04 22:30:23 -05:00
Scott Lahteine
e642a64b68
Prettify some EEPROM code
2017-11-04 22:00:45 -05:00
Scott Lahteine
64f077fd2a
Remove I2CPEM workspace offset
2017-11-04 22:00:45 -05:00
