MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
9,322 Commits 1 Branch 0 Tags 96 MiB
c3ff130127
Commit Graph

7697 Commits

Author SHA1 Message Date
Scott Lahteine
7b3e28fc77
Merge pull request #9489 from GMagician/1.1.x-Simplify-bltouch-configuration 
[1.1.x] Simplify bltouch configuration
 2018-02-05 14:37:34 -06:00
Scott Lahteine
873fb84d27
Fix const mesh_index_pair in G26 
Followup to #9493
 2018-02-05 14:29:47 -06:00
GMagician
587e6b7c8d [1.1.x] Fix compiler error when G26 is enabled 
Address #9491
 2018-02-05 21:21:42 +01:00
GMagician
f1958ac060 [1.1.x] Simplify bltouch configuration 
When using bltouch Z_MIN_ENDSTOP_INVERTING must match Z_MIN_PROBE_ENDSTOP_INVERTING

since both are redefined latter is just redefined equal to first
 2018-02-05 19:52:41 +01:00
Scott Lahteine
0f6f05441b Implement MALYAN_LCD 2018-02-04 21:18:49 -06:00
Scott Lahteine
ca58084020 Add MALYAN_LCD to configurations 2018-02-04 21:18:42 -06:00
Scott Lahteine
89a9aa931f SanityCheck.h parity with 2.0.x 2018-02-04 21:17:03 -06:00
Scott Lahteine
e9d374dd54 Tweak sanity-check for SENSORLESS_HOMING 2018-02-04 21:17:03 -06:00
Scott Lahteine
21bfbb9d44 Apply standards for whole-file conditions 2018-02-04 21:17:03 -06:00
Scott Lahteine
5054c53901 Export more in ultralcd.h 
Closer parity with 2.0.x
 2018-02-04 21:17:03 -06:00
Scott Lahteine
56d5c5b97a Misc. comments 2018-02-04 21:16:07 -06:00
Scott Lahteine
ad70d76faa
Merge pull request #9332 from paierh/bugfix-1.1.x-UBL-pattern 
[1.1.x] Change angles for circles in G26-validation-pattern
 2018-02-04 19:05:32 -06:00
Michael Neumann
499248c5ef Allow override of RAMPS CS Pins 2018-02-04 06:10:42 -06:00
shaktee
6e86c9d22b Add BIBO configs to Marlin bugfix-1.1.x (#9467) 
[1.1.x] BIBO TouchX configuration
 2018-02-03 23:20:35 -06:00
Scott Lahteine
d00eb4da5c Language updates for parity 2018-02-03 22:48:06 -06:00
Thomas Moore
5b4e39a429 Apply feedrate to nozzle movement for kinematic machines 2018-02-03 22:17:13 -06:00
Scott Lahteine
3bdd7b1ed3 Reduce trig table down to 6 floats 2018-02-03 19:16:42 -06:00
GMagician
14b7c8cf51 [1.1.x] Fix temperature out of LCD 
Fix bug introduced in #9381

Original code was 18-chars*6 hence reversed number in if statements
 2018-02-03 22:58:26 +01:00
paierh
68cff5f245 Change G26 circle angles 
Changed the start- and end-angles for circles in the mesh-validation-pattern to avoid crossing lines.

At the start-/end-point of the circles there is a small dot of filament on my printer.
When drawing lines after the circles the nozzle crashes into those dots and destroys the circles.
I solved this problem by rotating the start- and end-points by 45 degrees.
 2018-02-02 05:24:31 -06:00
Manuel Valentino
652162777b [1.1.x] Fixed wrong information about TMC2208 wiring (#9334) 2018-02-02 04:14:43 -06:00
teemuatlut
923f17328f Add TMC software SPI (#9362) 2018-02-02 03:56:08 -06:00
Custom3DProducts
f4076fe99d [1.1.x] Add Z_PROBE_HYSTERESIS to mitigate Z jerking while probing (#9375) 2018-02-02 02:29:19 -06:00
Scott Lahteine
6445859270
Merge pull request #9373 from nikkoura/fix_fr_strings 
[1.1.x] Fix french language (typos, case homogeneity)
 2018-02-02 01:54:12 -06:00
GMagician
4661451d32 [1.1.x] Fix compile error on delta when NO_WORKSPACE_OFFSETS (#9387) 2018-02-02 01:43:53 -06:00
Scott Lahteine
8bccd0ef5b Fix up _Bootscreen.h and _Statusscreen.h 
- Support for 3 and 4-frame fan animation
- Binary bitmap data for easier visualization
- Cleanup mystery numbers, etc.
 2018-02-02 00:55:02 -06:00
Scott Lahteine
f4639fa964 Move SET_BIT macro to endstops.cpp and simplify 2018-02-02 00:50:29 -06:00
Scott Lahteine
0a10d010b7
Merge pull request #9390 from tcm0116/1.1.x-retract 
[1.1.x] Clear retracted status when homing the Z axis
 2018-02-01 23:36:53 -06:00
Scott Lahteine
7a056a4e09 Patch resume_print based on suggestion 
See #9392
 2018-02-01 23:34:14 -06:00
Scott Lahteine
33c459c1d6 Parser followup patch 
Based on #9393
 2018-02-01 23:25:22 -06:00
Scott Lahteine
65c2f3bb65
Merge pull request #9435 from thinkyhead/cleanup_binary_deleteme 
[1.1.x] Separate 32-bit wide bit macros
 2018-02-01 22:44:18 -06:00
Scott Lahteine
31920a5285 Add / use 32-bit wide bit macros 2018-02-01 21:47:23 -06:00
Scott Lahteine
b78cccad0f Fix broken G29 W I J 2018-02-01 19:50:18 -06:00
Thomas Moore
36a1d12238 Clear retracted status when homing the Z axis 2018-01-29 19:35:16 +00:00
Nikkoura
79183f7620 Fix french language (typos, case homogeneity) 2018-01-28 00:01:00 +01:00
GMagician
b0f148f7db [1.1.x] Fix SD wrong filename list (#9343) 
If last file in directory has short filename and is preceded by a deleted long file name. SD menu will wrongly report long deleted file name as last entry
 2018-01-24 23:07:58 -06:00
Scott Lahteine
bc4fa3984b Prettier codebits debugging 2018-01-24 00:30:58 -06:00
Scott Lahteine
d60e5c89d8
Merge pull request #9326 from thinkyhead/bf1_fix_parser_M118 
[1.1.x] Fix parser.has_value, M118 parameters
 2018-01-24 00:23:50 -06:00
Stefan May
908d487212 removed execution mode from files 2018-01-24 00:17:34 -06:00
Scott Lahteine
a855d01336 Fix M118 parameter parsing 2018-01-23 23:50:42 -06:00
Scott Lahteine
d5ad51821c Simplify G-code debug option 2018-01-23 23:50:42 -06:00
Scott Lahteine
59b5800e58 Change parser codebits from array to int32_t 2018-01-23 23:50:42 -06:00
Scott Lahteine
1b84807eb0 Fix has_value with FASTER_GCODE_PARSER 2018-01-23 23:50:42 -06:00
Scott Lahteine
3ab4736ac9 Move some strings to PROGMEM 2018-01-23 23:50:42 -06:00
Scott Lahteine
d8aa40eedf Marlin must override _BV for 32-bit masks! 2018-01-23 23:50:42 -06:00
Scott Lahteine
2177c246d5 Patch BQ Hephestos 2 filament diameter 
From #9314
 2018-01-23 20:38:43 -06:00
Scott Lahteine
f447668387 Optimize some serial strings 2018-01-23 18:59:35 -06:00
Scott Lahteine
d4ab383a1b Lightly optimize arc length calculation 2018-01-23 18:59:35 -06:00
Scott Lahteine
87c254b238
Patch M114 D logical output 2018-01-23 18:48:53 -06:00
Scott Lahteine
df5c06ab7b Fix G29 no_action with A and Q 2018-01-23 13:58:36 -06:00
Scott Lahteine
b2dcb75c6c Include Z Fade in log_machine_info 2018-01-23 13:58:36 -06:00
Scott Lahteine
074f191bc3 Followup patch for TMC stepper init 2018-01-23 13:58:36 -06:00
Manuel Valentino
2bda584fc6 Added missing SoftwareSerial begin for TMC2208 2018-01-22 10:49:40 -06:00
Thomas Moore
b818543045 [1.1.x] Fix change filament for delta machines (#9296) 2018-01-22 10:19:00 -06:00
Scott Lahteine
1cea0b6f70 Fix Skew Correction pre-calculation overflow error 2018-01-22 08:22:28 -06:00
Scott Lahteine
5c6061ea5a More precision in M852 skew report 2018-01-22 08:06:40 -06:00
Scott Lahteine
6799aa9806
Merge pull request #9278 from oysteinkrog/fix/DualX_Endstops_1.1.x 
[1.1.x] Fix DUAL_X_CARRIAGE endstop tests
 2018-01-22 07:42:28 -06:00
Scott Lahteine
049898fa30 Update comment on set_home_offset 2018-01-22 06:14:55 -06:00
Scott Lahteine
feb6014e92 Don't run M600 on filament runout if the nozzle is cold 2018-01-22 05:46:29 -06:00
Scott Lahteine
c7ae531e35 Better LCD message when heating needed 2018-01-22 05:46:29 -06:00
Scott Lahteine
c373afbddd Clean up and document load/unload/pause/resume 2018-01-22 05:46:19 -06:00
Scott Lahteine
c970869d74 Add hotEnough methods 2018-01-22 05:46:19 -06:00
Scott Lahteine
e8687e5b9e Update pins.h for parity, protect MS pins 2018-01-22 02:19:04 -06:00
Scott Lahteine
198498b1aa Sanity check for TMC2130 having CS pins 2018-01-22 02:04:21 -06:00
cprund
0527090a31 Minor bugfix to the code that enables the 2nd X stepper. It needs to be enabled for X_DUAL_STEPPER_DRIVERS. (#9286) 2018-01-22 01:32:09 -06:00
Scott Lahteine
3d9f360b5a Better probe boundaries for linear/grid 2018-01-22 01:10:34 -06:00
Scott Lahteine
c8ac3a2a72 Add example configs for JGAurora A5 2018-01-21 22:23:31 -06:00
Scott Lahteine
957bb3124a Add thermistor 15 tuned for JGAurora A5 2018-01-21 16:57:47 -06:00
Øystein Krog
1f37781bf1 Fix DUAL_X_CARRIAGE endstops 
\#8170 fixed
(cherry picked from commit 441517bbe1625aa68a49aef0f98c6c4184e66dff)
 2018-01-21 16:32:29 +01:00
Scott Lahteine
7b62670987
Merge pull request #9272 from thinkyhead/bf1_creality_tuneup 
[1.1.x] Fix and improve Creality configs
 2018-01-21 02:53:08 -06:00
Scott Lahteine
7b5a4f71be
Fix toDigital length with days 
From #9220
 2018-01-21 02:50:54 -06:00
Scott Lahteine
94a9cd6477 CR-10S filament change length, enhanced status bitmap 2018-01-21 01:58:55 -06:00
Scott Lahteine
0cfcc7cbf5 Make "Ender" status screen dual-nozzle ready 2018-01-21 01:58:55 -06:00
Scott Lahteine
292755258a Add a heating indicator X offset 2018-01-21 01:58:40 -06:00
nhchiu
4a40cf268d Use NEOPIXEL as case light 
Add an option to use the NEOPIXEL LED as case light.
 2018-01-20 16:57:04 -06:00
Scott Lahteine
428fbe8228 Apply CASE_LIGHT_USE_NEOPIXEL to example configs 2018-01-20 16:27:30 -06:00
Scott Lahteine
81a12b2fac Relative movements fix 2018-01-20 15:22:38 -06:00
Scott Lahteine
fb636db61a Patch to restore broken Dual X Carriage 2018-01-20 15:07:40 -06:00
Scott Lahteine
369f1a64d8
Merge pull request #9262 from tcm0116/1.1.x-delta_softstops 
[1.1.x] Allow DELTA to compile with soft endstops disabled
 2018-01-20 14:16:14 -06:00
Scott Lahteine
6ed2840615
Use delay() in serial temp report 2018-01-20 14:12:30 -06:00
Scott Lahteine
eb3a05c437
Allow FIL_RUNOUT_PIN override on RAMPS-based boards 2018-01-20 12:00:03 -06:00
Scott Lahteine
d29a0d64d5
Set FIL_RUNOUT_PIN for Creality CR10-S 
Tested with M43 and found to be connected to DIO 2
 2018-01-20 11:58:37 -06:00
Scott Lahteine
09ad00b2d1
Use standard encoder pulses/steps for CR-10S 2018-01-20 11:34:53 -06:00
Thomas Moore
f8192f6e46 Allow DELTA to compile with soft endstops disabled 2018-01-20 09:43:59 -06:00
Scott Lahteine
f360b3b849
Date refresh 2018-01-20 09:17:00 -06:00
Scott Lahteine
74c23bf80d
Merge pull request #9232 from GMagician/1.1.x-ramps-pins-fixup 
[1.1.x] Expand RAMP case light possibilities
 2018-01-19 22:29:09 -06:00
Scott Lahteine
8d14ff1446
Merge pull request #9248 from GMagician/1.1.x-bed-temp-limit-fix 
[1.1.x] Standardized max temp values
 2018-01-19 22:27:00 -06:00
GMagician
2814103458 Standardized max temp values 
Everywhere in menu items temperatures are "defined value" subtracted by 15.
In one place is subtracted by 5
 2018-01-19 19:41:45 +01:00
Bob-the-Kuhn
d0e61d82c0 TMC2208 sanity check 2018-01-18 23:16:41 -06:00
Roxy-3D
0edf5a2ab5
Better handle serial over runs... 2018-01-18 16:51:27 -06:00
Roxy-3D
597d94bd3a
Better handle serial buffer over run 2018-01-18 16:48:12 -06:00
Roxy-3D
73565728c7
Further clean up for serial over run issue during long operations 2018-01-18 14:38:18 -06:00
GMagician
3b53c5ada1 Expand RAMP case light possibilities 
Pin 6 is only used by servos when 2 or more of them are used
 2018-01-18 18:35:08 +01:00
Roxy-3D
cbdbeb3e69
PronterFace M105 work around (#9227) 
PronterFace keeps sending M105 requests during long operations like G29 P1, G29 P2, G29 P4 and G26. The serial buffer fills up before the operation is complete. The problem is, a corrupted command gets executed. It is very typical for the M105 to turn into a M1 (actually... M1M105 is typical).

This causes the printer to say "Click to resume..."

This is a temporary fix until we figure out the correct way to resolve the issue.

More work needed for G26.
 2018-01-17 22:51:19 -06:00
Roxy-3D
80c1afde0f
Fix mesh size... 2018-01-17 09:33:18 -06:00
Roxy-3D
c11665e92f
Regression fixes for UBL's G29 P1, G29 P2, G29 P4 and G26 (#9213) 
The changes to ultralcd.cpp for is_lcd_clicked() did not encompass the
full functionality of UBL's G29 P1, P2 and P4.   It also broke G26's
ability to abort in several of its phases.

This is the first pass at fixing the problem.   It has been tested for
correctness for several hours but more testing  needs to be done.
There may be a few follow up patches to finish covering all the corner
cases, but right now I need to merge this before any conflicts show up.

Some of these changes will need to be moved over to the bugfix-v2.0.0
branch.   That will happen a few days from now.
 2018-01-17 00:27:50 -06:00
Scott Lahteine
333bd8f394
Merge pull request #9203 from benlye/m73-bugfix-1.1.x 
[1.1.x] Fix progress bar duration when time is exactly 86400s
 2018-01-16 21:14:31 -06:00
Bob-the-Kuhn
ba9aa47260
Revert "[1.1.x] Fix missing deceleration steps" 2018-01-16 11:31:27 -06:00
blye
deda3d3a3c Fix duration when time is exactly 86400s 2018-01-16 08:16:42 +00:00
Bob-the-Kuhn
ec028faa1b
Merge pull request #9174 from Sebastianv650/fix_missing_decel_steps 
[1.1.x] Fix missing deceleration steps
 2018-01-15 21:03:51 -06:00
Roxy-3D
06adef7343
Get FT-i3-2020 example files in compliance with ?_BED_SIZE 2018-01-15 15:32:19 -06:00
Scott Lahteine
69c993092b Followup to Ender config 2018-01-15 05:48:50 -06:00
Tommie Gannert
f3f26f7cb3 Creality Ender support. 
Reverse engineered from the unpublished firmware from Creality,
inferring the base version and configuration they used. The basis is
the firmware version from "Jul 31 2017 10:16:30". Configurations were
found by seeing what code was compiled into the firmware, and
constants used there.

They used Marlin 1.0.1, because

* 1.0.0 had very different serial output in `setup()` and overall
  code structure.
* 1.0.2 changed the `VERSION_STRING` to include a leading space,
  and `lcd_init` uses `SET_INPUT` instead of `pinMode`.

For U8Glib, a version between 1.14 and 1.17 was used, because

* 1.12 didn't have the extra speed argument to u8g_InitCom.
* 1.13 didn't have the soft reset instruction for UC1701 initialization.
* 1.18 has a new directory structure.

Quirks

* The value of PID_dT hints that F_CPU is 20M, but MarlinSerial.begin
  suggests it's indeed 16M (and the board uses 16M). Left at 16M for now.

* The LED and DOGLCD_CS are on the same pin.
 2018-01-15 03:39:43 -06:00
Scott Lahteine
a16ae30a61 More featureful CR-10S configuration 2018-01-15 01:02:23 -06:00
Scott Lahteine
175207659a
Merge pull request #9183 from thinkyhead/bf1_new_flsun_config 
[1.1.x] Add FLSUN Kossel configuration
 2018-01-15 00:49:25 -06:00
Scott Lahteine
5129eb1d43 More reliable temperature serial output? 2018-01-15 00:44:55 -06:00
Scott Lahteine
8f08e029d8 More up-front option to show SD percentage 2018-01-14 23:30:59 -06:00
Scott Lahteine
5c6c12dc3a Patch EEPROM for 32-bit 2018-01-14 23:18:45 -06:00
Scott Lahteine
734fa91e63 Misc config updates 2018-01-14 23:18:45 -06:00
Scott Lahteine
1d5eba4470 Add FLSUN Kossel configuration 2018-01-14 23:18:45 -06:00
Scott Lahteine
758d9db964 Link to marlinfw.org bitmap tool 2018-01-14 22:39:57 -06:00
Scott Lahteine
1d8b03964f
Merge pull request #9164 from GMagician/1.1.x-SD-issues-fix 
[1.1.x] sd issue fix
 2018-01-14 20:47:04 -06:00
Sebastianv650
4fa0937a55 Fix missing deceleration steps 
Marlin never reached final_speed after deceleration.
 2018-01-14 17:09:47 +01:00
GMagician
82dc89bfd2 Save some program memory 
This will save some program memory with no speed lose
 2018-01-13 09:46:54 +01:00
GrantM11235
a0bd811093 [1.1.x] Fix support for Malyan M150 (#9146) 
Implements changes to LCD and encoder pins from
forums.reprap.org/read.php?110,716538,728278 and also sets
ST7920_DELAY_[1-3] to DELAY_2_NOP to be compatible with the slower LCD
 2018-01-12 01:14:07 -06:00
Scott Lahteine
c1d6d24b9d Cleanup spacing, commentary 2018-01-11 18:52:54 -06:00
Sebastianv650
e2871f0dcd [1.1.x] Ensure smooth printer movements (#9149) 
- Never execute a block without an up-to-date trapezoid
- Start blocks with MINIMUM_PLANNER_SPEED, except when coming from a full stop
 2018-01-11 18:50:18 -06:00
Bob-the-Kuhn
4393c3ef7f LCD_CONTRAST to uint16_t for 1.1.x parity (#9148) 2018-01-11 18:32:41 -06:00
Scott Lahteine
e8b1bbac83 Creality CR-10S configurations 
Provided by printedsolid.com
 2018-01-11 01:03:34 -06:00
Scott Lahteine
885200f833 Bring other configs up-to-date 2018-01-11 01:03:34 -06:00
Scott Lahteine
3df0d62725 Updates to TMC support 2018-01-10 04:32:49 -06:00
Scott Lahteine
d1ce0bc071 M915 Z Axis Calibration 2018-01-09 18:55:08 -06:00
Scott Lahteine
9714c9aebe
Merge pull request #9128 from fiveangle/bf1-disable_serial_stats_on_usbcon 
[1.1.x] SERIAL_STATS_* features not supported on USBCON targets
 2018-01-09 18:42:26 -06:00
Dave Johnson
2fcef3e8e2 Enable USE_ZMIN_PLUG on SCARA example (#9125) 2018-01-09 18:41:02 -06:00
Dave Johnson
dd55c98139 SERIAL_STATS_* features not supported on USBCON targets 2018-01-09 16:27:57 -08:00
Scott Lahteine
bb5ba482bc More EEPROM field debugging 2018-01-09 18:10:33 -06:00
GMagician
5903b002ac 1.1.x semitec 104NT-4 added (#9120) 
Table is very very similar to old 104-GT2 so I added only the name and recycled old ID
 2018-01-09 16:53:44 -06:00
Anthony
1326eb4ef7
fix fwretract structure reference #9102 
Marlin_main.cpp: In function 'void resume_print(const float&, const float&, int8_t)':

Marlin_main.cpp:6646: error: 'retract_length' was not declared in this scope
         do_pause_e_move(-retract_length, fwretract.retract_feedrate_mm_s);
                          ^
 2018-01-08 18:48:19 -06:00
Scott Lahteine
0eee55c0dd Patch TMC current read from EEPROM 2018-01-07 20:49:43 -06:00
Scott Lahteine
f8dee4e726
Merge pull request #9088 from thinkyhead/bf1_mbl_localize 
[1.1.x] MBL cleanup, has_mesh() method
 2018-01-07 20:10:10 -06:00
Tannoo
2c3bdfe2ea [1.1.x] UBL Mesh Storage Message (#9094) 2018-01-07 20:07:20 -06:00
Scott Lahteine
ffeb4495fe Make mbl.has_mesh() a method 2018-01-07 18:14:37 -06:00
Scott Lahteine
be555e3578 Move MBL functions into the class 2018-01-07 18:14:37 -06:00
Scott Lahteine
eec97a5cf1 Don't wrap mbl.h in conditionals 2018-01-07 00:24:46 -06:00
Scott Lahteine
fa3709451b
Set mbl.has_mesh on manual point entry 
Based on #9086
 2018-01-06 23:32:00 -06:00
Scott Lahteine
eaa6257baf
Fix M503 skew output 
Followup to 1761cacaa1
 2018-01-06 20:53:33 -06:00
Someone Unknown
b5e98ac1b7 Set laser/spindle PWM to lowest speed on M5 2018-01-06 14:01:58 -06:00
GMagician
4cb35a285b Bmp fix 
Clockwise arrow fixed
 2018-01-06 19:08:37 +01:00
Bob-the-Kuhn
0b5b2a424c
Merge pull request #9067 from MarlinFirmware/SD-detect 
[bugfix-1.1.x] SD card detect fix
 2018-01-05 20:32:33 -06:00
Bob-the-Kuhn
0868907359 works 2018-01-05 19:12:34 -06:00
Scott Lahteine
670df2ea6d Settings FIELD_TEST fix 2018-01-05 19:12:22 -06:00
Scott Lahteine
fbda8a2e2b UBL G29 works without settings.load 2018-01-05 15:47:52 -06:00
Scott Lahteine
3d34dddbc0 Squish lcd_advanced_pause_show_message 2018-01-05 15:47:52 -06:00
Scott Lahteine
3b3b7e09ec Add FIELD_TEST to validate storage 2018-01-05 15:47:52 -06:00
Scott Lahteine
5d26f88bd5 Add data size validation 2018-01-05 15:47:52 -06:00
Scott Lahteine
51977c64ee Add a struct defining EEPROM storage 2018-01-05 15:47:51 -06:00
Scott Lahteine
42216f52ab Add MarlinSettings::validate() 2018-01-05 14:40:20 -06:00
Scott Lahteine
760c4e94d5 Write filler for disabled volumetrics 2018-01-05 10:20:17 -06:00
Scott Lahteine
a4e0fd7883 Pretty up TMC current write 2018-01-05 10:20:16 -06:00
Scott Lahteine
2287fa126c Whitespace cleanup 2018-01-05 10:19:15 -06:00
Scott Lahteine
fd4f49512d
Merge pull request #9054 from thinkyhead/bf1_fwretract_class 
[1.1.x] FWRetract class for 2.0.x parity
 2018-01-04 19:40:32 -06:00