Commit Graph

459 Commits

Author SHA1 Message Date
Bernhard
0c123950e9 __ header file replace 2012-06-02 20:44:17 +02:00
Bernhard
bf077125b9 added firmware retract. disabled by default 2012-06-02 20:32:28 +02:00
Bernhard
88d2a671cc readme corrected 2012-06-02 14:14:36 +02:00
Bernhard
0e5e249ab5 added individual pullup setting option to have finer control in case there is a special z-min sensor, for example 2012-06-02 13:47:50 +02:00
Bernhard
e792d62f47 readme 2012-06-02 13:44:38 +02:00
Bernhard Kubicek
6b14f95b3e Merge pull request #170 from linagee/Marlin_v1
Marlin v1
2012-06-02 03:46:56 -07:00
Bernhard Kubicek
c7ce99d495 Merge pull request #172 from daid/Marlin_v1
Add M401 - Wait for user to press button on LCD (with optional timeout) minor fix in M115.
2012-06-02 03:44:03 -07:00
Bernhard Kubicek
b7fc14bc65 repaired thermistortable_6 by graphcial fitting of the off-slope values. see issue 179. Erik, I know you asked for no changes, but this file probably is not related and hopefully allright. 2012-05-30 14:14:36 +03:00
ErikZalm
9e1021efbe Fixed SL bug. 2012-05-28 22:32:53 +03:00
Daid
e9bec9b6fe Fixed E1_ENABLE pin for Ultimaker. This was wrong for the 1.5.4 and 1.5.3 PCB (I cannot check the 1.5.6) 2012-05-24 18:36:55 +02:00
linagee
fbd282b3ba Update Marlin/Configuration.h 2012-05-20 13:19:28 -06:00
linagee
2e8c5049c5 Update Marlin/thermistortables.h 2012-05-20 13:18:45 -06:00
linagee
2d0d8e5272 Small correction. 2012-05-20 11:09:07 -06:00
Daid
4d7fe7115f Changed M401 to M0/M1 as suggested, so they match normal CNC stop commands. 2012-05-20 14:37:30 +02:00
linagee
9e9db65c3f Update Marlin/thermistortables.h 2012-05-20 05:51:29 -06:00
linagee
bd966ef389 Update Marlin/thermistortables.h 2012-05-20 05:49:01 -06:00
linagee
775da3f103 Added top ratings and extended to ADC=1 for table 3 and 5. 2012-05-20 05:35:57 -06:00
linagee
96a4baa0be Update Marlin/thermistortables.h 2012-05-20 04:55:22 -06:00
linagee
2aa9f7b131 Update Marlin/thermistortables.h 2012-05-20 04:35:28 -06:00
linagee
c4490f5f3d Update Marlin/Configuration.h 2012-05-20 04:27:52 -06:00
linagee
dd9144994e Tested May 19 - It works! Verified with separate thermocouple TM-902C also. 2012-05-20 04:13:29 -06:00
linagee
4c37d0d9f1 Extended range above 250C. (Operating range states up to 300C) 2012-05-20 04:01:30 -06:00
Daid
b59724e42b Add strigification for extruder amount in M115 report. 2012-05-19 19:01:14 +02:00
Daid
16413bb8f2 Last M401 update, refresh the LCD during an M401 wait. 2012-05-19 18:53:56 +02:00
Daid
b3941fce5c Update after testing 2012-05-19 18:48:43 +02:00
Daid
d494688565 Do not initialize in the header file. 2012-05-19 17:57:52 +02:00
Daid
516ec90242 Add M401 - Wait for user on LCD button press 2012-05-19 17:54:07 +02:00
Daid
7244aa7eb7 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2012-05-19 17:38:46 +02:00
linagee
de2ca3b2e8 Grammar correction. 2012-05-19 07:40:35 -06:00
linagee
c2fc466e1b Update Marlin/Configuration.h 2012-05-19 05:56:17 -06:00
linagee
241f5a4c0e Update Marlin/thermistortables.h 2012-05-19 05:52:12 -06:00
linagee
9f9f498491 Update Marlin/Configuration.h 2012-05-19 05:47:30 -06:00
Erik van der Zalm
e31bef31ad Limit PID autotune PWM to PID_MAX 2012-05-16 19:32:23 +02:00
ErikZalm
b2a9ccdb97 Merge pull request #159 from MaikStohn/Marlin_v1
Marlin v1 - BUG FIXES / CORRECTIONS
2012-05-16 12:32:35 -07:00
Erik van der Zalm
d459fb41b7 Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1 2012-05-16 19:22:08 +02:00
ErikZalm
804e0d6117 Merge pull request #164 from guanix/Marlin_v1
Melzi support
2012-05-16 12:21:48 -07:00
ErikZalm
bb499421e9 Merge pull request #166 from zittix/Marlin_v1
Fixes #153 for bad call to abs()
2012-05-16 12:00:22 -07:00
Erik van der Zalm
ba96059203 add additional dropsegments test 2012-05-16 19:21:44 +02:00
zittix
fbd91ab0b5 Fixes #153 for bad call to abs() 2012-05-16 18:17:34 +02:00
MaikStohn
b51c06e2b3 Merge branch 'Marlin_v1' of https://github.com/ErikZalm/Marlin into Marlin_v1 2012-05-11 16:57:08 +02:00
MaikStohn
159ae90874 bug fix for scrolling of main menu when using SMALL_DISPLAY (2 lines only) 2012-05-11 15:23:10 +02:00
MaikStohn
e48f5aa6a7 fixed typo 2012-05-11 15:22:06 +02:00
MaikStohn
1efe9ab497 changed encoder pos from int to long to fix problems setting x/y/z/e stepps_per_mm using the lcd menu 2012-05-11 15:19:09 +02:00
Guan Yang
602c8ee02b Melzi support 2012-05-09 18:37:07 -04:00
Daid
279d00da9f Fixed #if for Ultimaker. 2012-05-09 10:50:44 +02:00
daid
830972ce3c Merge pull request #1 from ErikDeBruijn/Marlin_v1_Ultimaker-rc3
Marlin v1 ultimaker rc3
2012-05-09 01:35:59 -07:00
Bernhard Kubicek
451f9cc6d1 Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer. 2012-05-09 08:05:13 +03:00
Erik de Bruijn
e3fe1f0d00 Made a more granular configuration possible PREVENT_LENGTHY_EXTRUDE. You can now decide to allow/disallow large length of extrusions to be executed.
Turning off the protection might be beneficial to those who want to do fast and long reversals.
2012-05-08 17:44:08 +02:00
Erik de Bruijn
d88205d89d Suggestion to improve (TODO), no actual code changed 2012-05-08 17:43:57 +02:00
Erik de Bruijn
5aa80e6c05 Made language.h more flexible. Automatically do the right defines based on MOTHERBOARD == 7 ? "Ultimaker" : "Mendel" 2012-05-08 17:43:02 +02:00