MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity
15,628 Commits 1 Branch 0 Tags 129 MiB
18dd0d00a6
Commit Graph

227 Commits

Author SHA1 Message Date
Scott Lahteine
2aa35e95af More G26 arc cleanup 
Followup to #13531
 2019-04-03 16:03:21 -05:00
ManuelMcLure
04086fc455 Minor optimization to ARC_SUPPORT code (#13531) 2019-03-30 22:29:37 -05:00
InsanityAutomation
7240e3a68f Allow G26 with no heated bed (#13511) 2019-03-29 13:32:43 -05:00
Thomas Moore
263f8edff8 Disable volumetric extrusion during G26 (#13479) 2019-03-25 22:41:52 -05:00
InsanityAutomation
3fb8489ae3 EXTUI and UBL compilation fixes (#13420) 2019-03-17 07:57:54 -05:00
Scott Lahteine
49cf92dc36
Extended condition macros (#13419) 
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
 2019-03-16 23:43:06 -05:00
Scott Lahteine
f5bcc00570
Unify debugging output with debug_out.h (#13388) 2019-03-14 02:25:42 -05:00
Scott Lahteine
87162658c4
Fix and improve software endstops (#13386) 2019-03-13 05:48:36 -05:00
InsanityAutomation
c03df89921 ExtUI Mesh Leveling Extensions (#13363) 2019-03-13 00:45:52 -05:00
Scott Lahteine
e52bcc9408 Limit top bed temp to BED_MAXTEMP - 10 
The chances of a 10° overshoot is pretty minimal.
 2019-03-11 16:32:34 -05:00
InsanityAutomation
d54741eda8 Update some G26 plausible values. Add speed control. (#13330) 2019-03-08 03:13:44 -06:00
Scott Lahteine
cfdb38eda4
Allow SERIAL_ECHOPAIR to take up to 12 pairs (#13311) 2019-03-05 06:46:19 -06:00
Scott Lahteine
808b076000 Update some ABL/UBL conditionals 2019-02-25 16:01:42 -06:00
Scott Lahteine
0feeef2604 Update copyright in headers 2019-02-12 15:30:11 -06:00
Scott Lahteine
433518de74 Prevent M420 error from disconnecting OctoPrint 
Just echo the error instead of labeling it `Error:`.
 2019-02-04 01:54:43 -06:00
Marcio Teixeira
81e753064a Fix ExtUI compile warnings and error (#12799) 2019-01-03 08:36:43 -06:00
MasterPIC
3bb8b3529a Center ABL grid on bed with H parameter. (#12610) 2018-12-09 11:24:48 -06:00
Scott Lahteine
b7e38ea249 Signal an invalid mesh for M420 enable / load 2018-12-07 16:14:11 -06:00
Scott Lahteine
c986239837
A single SERIAL_ECHO macro type (#12557) 2018-11-29 16:58:58 -06:00
Scott Lahteine
a4c15dc54f
Modify MBL to use IJ instead of XY (#12478) 2018-11-19 09:08:15 -06:00
Marcio Teixeira
c1e17037e5 Various fixes for MarlinUI and ExtUI (#12439) 2018-11-17 22:21:44 -06:00
Giuliano Zaro
43ecdb606f Fix a compile warning (#12452) 2018-11-17 07:08:25 -06:00
Roxy-3D
cda5ef08fa
Debug of G2-G3 for UBL (#12386) 
Changes only affect UBL.  Everything else is left alone.
 2018-11-13 11:20:21 -06:00
Scott Lahteine
a163c89c6a Followup to 50af1d1 2018-11-12 20:31:53 -06:00
Scott Lahteine
50af1d1e08 Differentiate translated On/Off from Serial ON/OFF 2018-11-12 17:23:08 -06:00
Scott Lahteine
a0c795b097
Encapsulate common display code in a singleton (#12395) 
* Encapsulate common LCD code in a singleton
* Depend more UBL code on UBL_DEVEL_DEBUGGING
  - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
 2018-11-11 12:16:24 -06:00
Scott Lahteine
6093df11dc
Allow G26 to use the active extruder (#12387) 
* Make lcd_quick_feedback argument optional
* Add click_to_cancel option to wait_for_hotend/bed
* Have G26 use the active nozzle and wait_for_hotend/bed
* Use wait_for_release in UBL G29
* Add 'T' parameter to G26 for an initial tool-change
 2018-11-10 18:07:38 -06:00
Scott Lahteine
bed15fcd81 Tweak 'echo_not_entered' used by MBL's G29 2018-11-10 01:32:51 -06:00
Scott Lahteine
b3b4e6dc45
Change Marlin debug flag names to fix conflicts (#12340) 
In reference to #11000
 2018-11-05 22:48:28 -06:00
Scott Lahteine
486f2a66a9 Fix MBL XY parameter error messages 
Fix #11522
 2018-11-05 04:17:37 -06:00
Scott Lahteine
2613ddf61c Fix "circle" 2018-11-05 04:17:37 -06:00
Scott Lahteine
07a0822ebe M420 support in MARLIN_DEV_MODE 2018-11-04 20:54:38 -06:00
Scott Lahteine
44fa7fb18c Cleanups for leveling-related code 2018-11-04 19:07:47 -06:00
Scott Lahteine
3583e2b449
Followup to Menu Refactor (#12275) 2018-10-30 16:34:45 -05:00
MasterPIC
6fbc87301f 'G29 H' to set a centered square probe area (linear, bilinear) (#12242) 2018-10-27 20:30:21 -05:00
Scott Lahteine
d556dc1865
Fix and improve EEPROM storage (#12054) 
* Clean up Temperature PID
* Improve EEPROM read/write/validate
* Group `SINGLENOZZLE` saved settings
* Group planner saved settings
* Group filament change saved settings
* Group skew saved settings
* Group `FWRETRACT` saved settings
 2018-10-10 09:45:20 -05:00
Scott Lahteine
07d33849b0 Fix unused var warning, apply ENABLED 2018-10-09 21:31:28 -05:00
Scott Lahteine
1718eff54a Code changes supporting up to 6 extruders 2018-09-16 22:32:53 -05:00
Thomas Moore
c437bb08f1 Overhaul of the planner (#11578) 
- Move FWRETRACT to the planner
- Combine leveling, skew, etc. in a single modifier method
- Have kinematic and non-kinematic moves call one planner method
 2018-09-16 21:24:15 -05:00
Scott Lahteine
2a61c9a939 Various fixups to configs, spacing, etc. 2018-09-06 06:44:31 -05:00
Scott Lahteine
e05e95cf97 Clean trailing whitespace 2018-07-25 18:49:47 -05:00
Scott Lahteine
05518d6add Add newline to end of file 2018-06-29 23:54:16 -05:00
Colin Gilgenbach
0fff79c24b Fixes G29_with_retry behavior (#11045) 
* Fix G29 (ABL) retry behavior
 2018-06-29 20:48:11 -05:00
Scott Lahteine
a2a30ff0ac Use Tool 0 for Dual X Axis G29 
See https://github.com/MarlinFirmware/Marlin/issues/5597#issuecomment-397683325
 2018-06-20 01:32:23 -05:00
Scott Lahteine
4832be52d7 Followup to G29 O 2018-06-11 21:57:26 -05:00
Robert Mendon
86170e6a66 [2.0.x] Add O (optional) flag to G28/G29 (#10913) 2018-06-11 21:51:48 -05:00
Eduardo José Tagle
6f330f397e [2.0.x] Buffer overflow and scroll fix, UTF8 cleanup (#10844) 2018-05-25 23:32:37 -05:00
Scott Lahteine
c173a31060 Fix some compile warnings 2018-05-19 16:54:48 -05:00
Scott Lahteine
eb2eb72720
Modify UBL mesh_is_valid and use in leveling_is_valid (#10746) 2018-05-14 22:36:03 -05:00
Scott Lahteine
99ecdf59af Smarter MIN, MAX, ABS macros 
Use macros that explicitly avoid double-evaluation and can be used for any datatype, replacing `min`, `max`, `abs`, `fabs`, `labs`, and `FABS`.

Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-13 04:52:56 -05:00
Scott Lahteine
306f0f2135
Move Stepper::synchronize to Planner (#10713) 
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
 2018-05-12 01:38:02 -05:00
ManuelMcLure
8679f671ed Remove dependency on PI. (#10701) 2018-05-11 17:55:56 -05:00
Scott Lahteine
6671c064cd
Use arc moves for G26 if enabled (#10696) 
Co-Authored-By: ManuelMcLure <manuelmclure@users.noreply.github.com>
 2018-05-11 02:15:14 -05:00
Scott Lahteine
bfe223e120 Adjust usage of stepper.synchronize 2018-05-06 01:24:14 -05:00
Scott Lahteine
d7b699ec34 Fewer includes of vector_3.h 2018-05-01 07:05:18 -05:00
Scott Lahteine
05c33833e7
[2.0.x] Add NO_LCD_MENUS option (#10582) 2018-04-30 21:16:31 -05:00
Scott Lahteine
59fda986ea Allow Z_AFTER_PROBING to be 0 2018-04-30 03:25:47 -05:00
Scott Lahteine
8db7fb226a Fix M420 C for UBL 2018-04-28 08:14:20 -05:00
Scott Lahteine
a51ba6e3f6 Fix ABL grid bounds test for Delta/SCARA 
Addressing #10538
 2018-04-27 02:23:10 -05:00
Scott Lahteine
eef0248a1c
Add M420 C to adjust the whole mesh (#10522) 2018-04-25 06:43:45 -05:00
Scott Lahteine
cb46cb8480
Add HAS_HEATED_BED conditional (#10495) 2018-04-23 17:13:01 -05:00
Scott Lahteine
65a6a86d19 Don't report point 0 in MBL G29 2018-04-20 13:12:50 -05:00
Scott Lahteine
df2f24617b Use 0 as the bed position (not Z_MIN_POS) 2018-04-17 20:32:56 -05:00
Scott Lahteine
0746aff595 Improve UBL mesh report. Add M420 T, M421 N 2018-04-17 15:52:56 -05:00
Scott Lahteine
99282a46e9 Make sure ABL (manual) starts close to the bed 2018-04-13 20:19:30 -05:00
Scott Lahteine
bb7064cc30 Tweak MBL move to bed code 2018-04-12 22:43:02 -05:00
Scott Lahteine
daa712455b Make sure MBL starts close to the bed 
Fix #10390
 2018-04-12 19:36:37 -05:00
Scott Lahteine
aa20b3ef7c Fix linear/3-point manual leveling buffer overrun 
Fixes #10137
 2018-03-28 18:41:22 -05:00
Scott Lahteine
bc45fb6b13 Tweak use of move_z_after_probing 2018-03-21 01:25:08 -05:00
Scott Lahteine
c352954882 Allow no raise after run_z_probe in probe_pt 2018-03-21 01:24:51 -05:00
Scott Lahteine
dd2949922b Consolidate 3-point leveling point options 2018-03-19 04:12:20 -05:00
Scott Lahteine
14c03cb6f4
[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) (#10069) 
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
 2018-03-13 01:15:22 -05:00
Scott Lahteine
28f1276286
[2.0.x] Add Z_AFTER_PROBING option (#10058) 
Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
 2018-03-11 13:07:55 -05:00
Scott Lahteine
3f89bbeab5 Drop a conditional only used once 2018-02-24 16:35:31 -06:00
Scott Lahteine
241e55ef3b Apply SERIAL_FLUSH macro 2018-02-16 17:32:12 -06:00
Scott Lahteine
6a70a4fbb3
Fix G26 circles (#9627) 
Easier to configure. Catch an odd divisor.
 2018-02-15 22:11:26 -06:00
Roxy-3D
c78e1c0f23
Fix G26 Circles... (#9641) 
* Fix G26 Circles...
 2018-02-15 11:15:15 -06:00
Scott Lahteine
8d71ad37cb flush comment to match 1.1.x 2018-02-14 02:56:18 -06:00
Scott Lahteine
e3043d7ac7 Fix #8744 2018-02-10 16:54:42 -06:00
Scott Lahteine
ca8fdff1af Comment G26 properly 2018-02-06 00:58:28 -06:00
GMagician
338dac258b [2.0.x] Fix compiler error when G26 is enabled (#9492) 2018-02-05 14:27:39 -06:00
Scott Lahteine
03bfc0d7c8
Merge pull request #9439 from thinkyhead/bf2_fix_G26_circle_bumps 
[2.0.x] Change G26 circle angles
 2018-02-04 19:05:18 -06:00
Scott Lahteine
2ea4e74ed3 Misc. comments 2018-02-04 17:40:39 -06:00
Scott Lahteine
e6cdc438fd Change G26 circle angles 
To prevent the nozzle from colliding with the printed pattern.
 2018-02-03 19:17:49 -06:00
Scott Lahteine
a8764ac5d5 G26 parity with 1.1.x 2018-02-02 05:19:14 -06:00
Scott Lahteine
34160806c0 Fix broken G29 W I J 2018-02-01 21:37:35 -06:00
Scott Lahteine
e5ca60acf5 Patch G29 no_action for A and Q 2018-01-23 14:00:06 -06:00
Roxy-3D
bfd9728cf4
Serial buffer over run work around for v2.0.0 (#9236) 
* Work around for serial buffer over run

PronterFace sends a lot of M105 commands.  During long operations such
as UBL's G29 P1, G29 P2, G29 P4 and G26 this can over run the serial
buffer.   This results (very often) in a M1 (actually a M1M105) ending
up in the command queue.

Until we figure out a better way to resolve this issue, this will keep
the UBL commands from experiencing bogus commands at thier completion.
 2018-01-18 19:57:18 -06:00
Roxy-3D
f5f1b069ad
Convert UBL mesh tilting to all use the same algorithm (#9204) 
A number of regressions were patched also. The UBL G29 P2 and P4 Press and Hold had stopped working. It is very possible this is broken in the bugfix_v1.1.x branch also.

The main purpose of the Pull Request is to get the 3-Point mesh tilting to use the LSF algorithm just like the grid based mesh tilt. This simplifies the logic and reduces the code size some what. But the real reason to do it is the 3-Point case can be solved exactly. And by feeding these numbers into the LSF algorithm it provides a way to check all that code for 'correctness'.
 2018-01-16 11:08:00 -06:00
Scott Lahteine
60d07f20e7 Make mbl.has_mesh() a method 2018-01-07 00:13:36 -06:00
Scott Lahteine
86818c9a89 Move MBL functions into the class 2018-01-07 00:13:36 -06:00
Unknown
bbb8d4c802 Set has_mesh if user issues G9 S3 
Prevents user from having to manually run through entire manual leveling process only to enable mesh so they can manually restore their offline mesh backup
 2018-01-06 21:07:07 -08:00
Scott Lahteine
4ef965cc40 Fix compiler warnings 2017-12-25 08:53:01 -06:00
Scott Lahteine
9e8008c49c Fixes for G29, esp. 3POINT 2017-12-25 08:37:27 -06:00
Scott Lahteine
f2731c9f93 Allow consecutive uses of G29 2017-12-25 06:32:33 -06:00
Scott Lahteine
4b49ea1e92 General cleanup of config-store, reset_bed_level 2017-12-25 05:16:01 -06:00
Scott Lahteine
a71d2f3f40 UBL_DELTA => UBL_SEGMENTED 2017-12-11 00:27:06 -06:00
Scott Lahteine
73e32925e4 References are better for array args 2017-12-11 00:27:06 -06:00
Scott Lahteine
204199e1ce Only compare XYZ to check motion 2017-12-10 23:00:00 -06:00
Scott Lahteine
7d2e850577 Have M420 report a changed position 2017-12-10 21:39:49 -06:00
Scott Lahteine
03ba79f144 Sync and report changed position 2017-12-10 21:39:49 -06:00
Scott Lahteine
90cf6a06be Simplify G26 user_canceled 2017-12-06 22:02:54 -06:00
Scott Lahteine
c846388a65 Standardize LCD interface code for UBL a little 2017-12-06 21:50:54 -06:00
Scott Lahteine
2fde60da12 Changes for parity with 1.1.x 2017-12-06 21:50:54 -06:00
Scott Lahteine
f4b16a3bac
Update M49.cpp 2017-12-03 03:34:56 -06:00
Ben Lye
1f3ad461bc
Update M49.cpp 
Fix M49 so that it does not hang the terminal console.
 2017-11-30 20:17:44 +00:00
Scott Lahteine
0786b61ce7 Followup to #8575 2017-11-27 12:58:40 -06:00
Scott Lahteine
276271e72f Make MBL work more like PROBE_MANUALLY 2017-11-27 02:12:29 -06:00
Roxy-3D
e48fcad615 change G26 and G29 bit function names to avoid HAL collision 2017-11-25 19:58:45 -06:00
Scott Lahteine
41ec449960 Fix G26 error return 2017-11-25 19:53:14 -06:00
Scott Lahteine
b49acce035 Tweaks for lcd_external_control 2017-11-24 15:53:25 -06:00
Roxy-3D
ec04cf27d3
Fix the G26 out of scope identifiers in the v2.0.0 branch (#8543) 
These changes may need to be warmed over.  I tried to fix things with
the least amount of disruption.   I just wanted to get the bugfix_v2.0.0
branch working for people again.
 2017-11-24 10:39:56 -06:00
Scott Lahteine
c6b0c104bb Adapt G26 to work for all meshes 2017-11-23 22:31:37 -06:00
Scott Lahteine
c19eb33408 Move G26 to gcode sub-folder 2017-11-23 21:43:23 -06:00
Scott Lahteine
0cfb936dd1 Clarify some motion code 2017-11-08 22:15:55 -06:00
Colten Edwards
a6160916b0 [2.0] Fix M48 for delta printers/ABL compile issue (#8286) 
* fix M48 for delta printers

fix M48 for delta printers. home printer if not already homed.

* remove ENABLED(DELTA)

remove ENABLED(DELTA) as it is not needed.

* Update M48.cpp

* abl needs queue.h

without queue.h abl will not compile since there is a script that runs at the end of it and we need to queue it up.
 2017-11-07 15:36:33 -06:00
Scott Lahteine
85a62bbf46 Misc. fixes to compiler warnings, etc. 2017-11-06 22:57:05 -06:00
Scott Lahteine
f8393a0908 Operate in Native Machine Space 2017-11-04 00:05:38 -05:00
Roxy-3D
72156a2029 change to better (more clear) names (#8050) 
set_destination_to_current() changed to set_destination_from_current()

set_current_to_destination() changed to set_current_from_destination()
 2017-10-21 11:42:26 -05:00
Roxy-3D
5439358281 Basic UBL operations working on 32-bit platforms (#8024) 
* 32-bit work for UBL

* Update FT i3-2020 reference file
 2017-10-19 10:44:45 -05:00
Scott Lahteine
c0dddd4233 Tweaks to tool_change, GcodeSuite::T() 2017-10-14 02:53:19 -05:00
Scott Lahteine
1344ca4b2f UBL no longer needs ubl_state 2017-10-14 02:18:32 -05:00
Scott Lahteine
3e3911fb81 Use planner.leveling_active for all leveling systems 2017-10-14 02:18:31 -05:00
Scott Lahteine
9a930ebec2 Make leveling_is_active a macro 2017-10-14 02:18:31 -05:00
Scott Lahteine
90af1fe5ee Implement NO_MOTION_BEFORE_HOMING option 2017-10-01 21:58:50 -05:00
Scott Lahteine
931aa79d85 Move G42 to cpp 2017-09-21 16:26:52 -05:00
Scott Lahteine
551752eac7 Consolidate "bedlevel" code 2017-09-21 16:26:47 -05:00