Scott Lahteine
59cb1466b7
Fix DUGS / DGUS typo
2020-03-12 19:30:18 -05:00
George Fu
201c991cfa
Fix and update DGUS displays ( #17072 )
2020-03-11 03:40:30 -05:00
jufimu12
627aa8db2d
Fix G34, add HOME_AFTER_G34 option ( #17108 )
...
Co-authored-by: Scott Lahteine <github@thinkyhead.com>
2020-03-10 20:00:26 -05:00
Scott Lahteine
8f66dbfcd5
SD_DETECT_INVERTED => SD_DETECT_STATE ( #17112 )
2020-03-10 15:43:06 -05:00
Scott Lahteine
0f39386d9b
Make BOOTSCREEN_TIMEOUT generally available
2020-03-09 17:46:49 -05:00
Scott Lahteine
7674befa47
DOGM SPI delay is less common
2020-03-09 17:46:49 -05:00
Scott Lahteine
64d092935b
More useful ENABLED / DISABLED macros ( #17054 )
2020-03-07 22:20:41 -06:00
Scott Lahteine
20f93404a7
Add / correct comments
2020-03-07 02:16:17 -06:00
Scott Lahteine
0578e9b16e
Move SENSORLESS_PROBING to the probes section
...
Fixes a bug with HAS_BED_PROBE not being set before use.
2020-03-05 11:05:11 -06:00
thisiskeithb
efc739a880
Use BED_MAXTEMP for PTC_MAX_BED_TEMP ( #17061 )
2020-03-03 14:22:28 -06:00
Scott Lahteine
3a07b4412d
Asynchronous M114 and (R)ealtime position option ( #17032 )
2020-03-02 21:52:53 -06:00
InsanityAutomation
552f7a91d0
Default on/off for Power Loss Recovery ( #17051 )
2020-03-02 16:07:53 -06:00
Scott Lahteine
b1a50d54e2
HAS_TRINAMIC => HAS_TRINAMIC_CONFIG
2020-03-02 12:04:36 -06:00
Scott Lahteine
832951ec44
Case-insensitive g-code option ( #16932 )
2020-02-26 09:23:55 -06:00
Scott Lahteine
5b438fb20d
HAS_SDCARD_CONNECTION is more obsolete
2020-02-25 22:30:30 -06:00
InsanityAutomation
3e685777a8
Fix LCD cutter/bed icons overlapping ( #16956 )
2020-02-25 03:07:36 -06:00
InsanityAutomation
3a6f776c4b
Update POWER_LOSS_PIN comment ( #16957 )
2020-02-24 23:51:10 -06:00
Scott Lahteine
64a81f887a
EXPERIMENTAL integrated BABYSTEPPING ( #16829 )
2020-02-15 21:42:28 -06:00
George Fu
63dd0f249d
Fysetc S6 pins / LCD updates ( #16830 )
2020-02-14 07:18:57 -06:00
Scott Lahteine
3bef7a4450
Add g-code quoted strings, improve stream code ( #16818 )
2020-02-10 14:52:15 -06:00
Scott Lahteine
18a7276909
Revert "Coolstep for TMC2130, 2209, 5130, 5160"
...
Reverting #16790 as not ready for primetime.
2020-02-09 21:22:26 -06:00
InsanityAutomation
cc1ff27256
Bump config version to 020004 ( #16816 )
2020-02-09 12:15:02 -06:00
Fabio Santos
894762259b
Coolstep for TMC2130, 2209, 5130, 5160 ( #16790 )
2020-02-08 21:01:57 -06:00
Scott Lahteine
793939a365
Upgrade an ifdef
2020-02-04 08:46:37 -06:00
Scott Lahteine
7bf2190f03
Fix CALIBRATION_GCODE pin handling
2020-02-04 08:32:43 -06:00
felixstorm
38a9706e16
Keep secure credentials in a separate config file ( #16773 )
2020-02-03 23:29:01 -06:00
Scott Lahteine
bfad23d3e2
(c) 2020
2020-02-03 08:00:57 -06:00
InsanityAutomation
e58d1bf974
G34 automatic point assignment ( #16473 )
2020-02-01 04:50:44 -06:00
Scott Lahteine
e8ed4329ea
Cleanup of old includes, add comments
2020-01-29 22:41:18 -06:00
Hans007a
e2eef1256a
G60/G61 Position Save/Restore ( #16557 )
2020-01-26 23:19:05 -06:00
Scott Lahteine
1d1dc8e339
More 8 extruder defines
2020-01-26 03:24:54 -06:00
Scott Lahteine
86c18ea6e0
Bring configs and drivers.h up to date
2020-01-24 23:17:52 -06:00
Ryan
b7f86bffd5
Arc segment radius scaling ( #16551 )
2020-01-21 02:53:26 -06:00
InsanityAutomation
79810b7fcb
G12 defaults per tool. Event G-code for post-toolchange ( #16554 )
2020-01-21 02:51:23 -06:00
Scott Lahteine
84c874c53b
Tweak some config spacing
2020-01-21 02:43:34 -06:00
0r31
b57ef4b261
Override for LPC1768 u8g/digipot I2C master ID ( #16622 )
2020-01-20 20:09:16 -06:00
InsanityAutomation
0fcf2b1110
Quad Z stepper support ( #16277 )
2020-01-19 23:35:07 -06:00
tompe-proj
a338dce83f
PINDA v2 temperature sensor / compensation ( #16293 )
2020-01-17 17:16:45 -06:00
Dennis
2d7f94cae1
Adjustable ADC debounce delay ( #16264 )
2020-01-15 18:06:03 -06:00
gjdodd
7481563bd9
Nikon IR support for time lapse photos ( #16539 )
2020-01-15 17:59:41 -06:00
Scott Lahteine
ea7363a8f4
Update more configs
2020-01-14 18:48:29 -06:00
Bob Kuhn
1ad53cee1f
Improved STMicro L64XX stepper driver support ( #16452 )
2020-01-13 18:47:30 -06:00
Luc
d854c8fa5f
ESP3d integration for ESP32 ( #16515 )
2020-01-10 17:22:41 -06:00
Jamie
36d08f8ad3
Add ARC_SEGMENTS_PER_SEC for finer G2/G3 arcs ( #16510 )
2020-01-09 04:48:00 -06:00
Jamie
9b970cf12f
Add option to invert joystick axes ( #16466 )
2020-01-05 02:01:05 -06:00
George Fu
e593da1c23
Update and fix DGUS ( #16317 )
2020-01-03 21:00:44 -06:00
rado79
0be8b22d3c
Add FILAMENT_UNLOAD_PURGE_FEEDRATE ( #16372 )
2020-01-01 21:56:58 -06:00
Scott Lahteine
00c83e9ca6
Update comments re: NOZZLE_AS_PROBE
2020-01-01 19:41:23 -06:00
Scott Lahteine
b49a0e39d5
HOME_USING_SPREADCYCLE is obsolete
...
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
2019-12-19 16:02:57 -06:00
Scott Lahteine
53f77dfadf
Remove obsolete TMC2209 comment
2019-12-19 15:56:52 -06:00
Jason Smith
1bad8f1b17
Improve pulse timing and step reliability ( #16128 )
2019-12-19 02:38:48 -06:00
Moshi Binyamini
dcdaa2025f
Sanity-check Z_STEPPER_AUTO_ALIGN coordinates ( #16231 )
2019-12-19 00:59:01 -06:00
Scott Lahteine
303ddb862a
Tweak some config names
2019-12-12 22:18:04 -06:00
haschtl
ff6518c0a8
Add PID_FAN_SCALING option ( #15585 )
2019-11-26 03:34:43 -06:00
Scott Lahteine
441e822fb3
LULZBOT_TOUCH_UI => TOUCH_UI_FTDI_EVE
2019-11-23 17:04:17 -06:00
BigTreeTech
ab8b24fdba
Power Loss Recovery with a UPS ( #15943 )
2019-11-20 17:40:21 -06:00
Scott Lahteine
aa93e1f21a
Update TMC_ADV examples
2019-11-15 02:15:10 -06:00
Roman Moravčík
e110f5abce
M73 R : Set Remaining Time ( #15549 )
2019-11-12 19:36:54 -06:00
Scott Lahteine
5e5045c4ee
Touch UI finishing touches
2019-11-10 18:52:53 -06:00
danym21
28e1614c2e
Add Sensorless Homing current ( #15690 )
2019-11-10 18:45:06 -06:00
LinFor
48b7a1e66e
Allow non-zero "fan off" PWM value ( #15709 )
2019-11-10 16:33:56 -06:00
Scott Lahteine
288af0ddf6
Whitespace
2019-11-01 15:39:05 -05:00
studiodyne
f139642e0f
XY/Z Babystep Multiplicators ( #15691 )
2019-10-28 16:44:17 -05:00
Scott Lahteine
7a342ecb93
Show Total E during print ( #15703 )
2019-10-27 17:49:27 -05:00
Scott Lahteine
93f0012959
Cancel Objects - As seen at ERRF2019 ( #15590 )
2019-10-24 15:35:40 -05:00
Scott Lahteine
2a7e1d459f
Option to rotate Percent, (E)lapsed, and (R)emaining time ( #15578 )
2019-10-24 14:00:59 -05:00
Scott Lahteine
ccf61eca84
Fix diplay elaspsed
2019-10-24 13:48:27 -05:00
Luu Lac
0b0b822671
Add note: TMC2209 requires stealthChop for Sensorless Homing ( #15658 )
2019-10-24 11:58:37 -05:00
Robby Candra
16ae9ee88b
Update Configuration_adv
2019-10-17 05:37:22 +07:00
Robby Candra
9b88c3e79b
DOGM Progress Display, option to disable display rotation
2019-10-17 05:26:09 +07:00
Jason Smith
832cb7e1ac
Z_STEPPER_AUTO_ALIGN — To align with Z stepper points ( #15195 )
2019-10-16 13:39:58 -05:00
InsanityAutomation
b2eda1af2f
Fix typo in G34 configuration ( #15572 )
2019-10-15 17:22:13 -05:00
LinFor
b20d5a7cc6
Estimate Remaining Time (graphical display) ( #15497 )
2019-10-10 21:03:33 -05:00
Scott Lahteine
b4d48fdc91
Followup to #15481
2019-10-08 21:38:02 -05:00
Scott Lahteine
c0005e939c
Enable junction deviation by default ( #15481 )
2019-10-08 19:42:18 -05:00
Scott Lahteine
9dcccc11ba
Fix extra condition
2019-10-07 22:36:49 -05:00
Giuliano Zaro
a1ad01e4ab
Limit Case Light PWM ( #15459 )
2019-10-05 22:32:50 -05:00
Bob Kuhn
178dcd6fd8
SPI chaining with TMCStepper simplified interface ( #15179 )
2019-09-29 05:47:20 -05:00
Scott Lahteine
50e4545255
Add custom types for position ( #15204 )
2019-09-29 04:25:39 -05:00
Ludy
f28f191ebf
Trailing whitespace ( #15403 )
2019-09-28 15:32:37 -05:00
InsanityAutomation
a6b0223eea
Revive and improve DELTA probe bounds, LRFB options ( #15372 )
2019-09-28 01:19:11 -05:00
Scott Lahteine
9a209012b5
Improve M114_DETAIL comment
2019-09-25 20:29:29 -05:00
Marcio Teixeira
149e9b733e
Simplified ExtUI language selection ( #15359 )
2019-09-25 01:25:21 -05:00
Marcio Teixeira
4ff59d178d
LULZBOT_TOUCH_UI extended character set ( #15301 )
2019-09-24 18:49:40 -05:00
InsanityAutomation
6a312fae80
Add before/after dir change delays ( #15314 )
2019-09-19 23:05:17 -05:00
Scott Lahteine
843a19102c
Shorten an option description
2019-09-14 16:45:04 -05:00
Scott Lahteine
3d0ead7dcb
Bring Configuration_adv.h up to date
2019-09-14 04:30:17 -05:00
Scott Lahteine
1d574b0f6a
Tweak config spaces
2019-09-11 17:32:54 -05:00
Marcio Teixeira
47d19bab40
Lulzbot ExtUI Western language support ( #15208 )
...
Fix #15134
2019-09-10 20:07:03 -05:00
Jamie
dbee0e9c54
Analog joystick jogging control ( #14648 )
2019-09-08 00:55:34 -05:00
Scott Lahteine
a3052da703
Move manual move to lcd section
2019-09-06 18:24:39 -05:00
Scott Lahteine
18dd5cb46a
Config comment patch
2019-09-05 01:48:12 -05:00
Scott Lahteine
2563e32aa3
Format FWRETRACT config comments
2019-09-04 12:48:50 -05:00
Bob Kuhn
ba91bca1eb
TMC SPI daisy chain support (experimental) ( #15081 )
2019-08-30 17:39:45 -05:00
thisiskeithb
f5a1fabd38
Clarify TMC2209 Sensitivity vs. Others ( #15092 )
2019-08-29 16:57:56 -05:00
Robby Candra
38983fdfa9
Add 'Back' Button for Touch TFT 320x240 ( #15060 )
2019-08-29 01:19:07 -05:00
AlexandrZloy
0ebaea94be
Add stallGuard threshold for X2 ( #15042 )
2019-08-29 00:15:31 -05:00
Marcio Teixeira
da601d5114
Update USB_FLASH_DRIVE_SUPPORT ( #15021 )
2019-08-24 01:47:19 -05:00
Scott Lahteine
5e777601f3
Add TURBO_BACK_MENU_ITEM option ( #14991 )
2019-08-20 19:37:03 -05:00
Tim Moore
67f8ba6fed
Allow pullup/downs on power loss pin ( #14986 )
2019-08-20 02:40:44 -05:00
Scott Lahteine
c8e476ad60
Embed some items in HAS_LCD_MENU
2019-08-18 18:41:51 -05:00
Ludy
6715fd159c
Animated Marlin boot screen ( #14961 )
2019-08-17 18:40:01 -05:00
Marcio Teixeira
8bdb3d9970
Add CONTROLLERFAN_SPEED_Z_ONLY ( #14956 )
2019-08-16 21:57:19 -05:00
Marcio Teixeira
274934ad81
Add LULZBOT_TOUCH_UI ( #14967 )
2019-08-16 18:34:13 -05:00
Marcio Teixeira
179d6c4ed1
Add STARTUP_SCRIPT option. M17 parity with M18. ( #14953 )
2019-08-14 21:05:15 -05:00
Joseph Bozarth
0fbb26c28f
M16 - Expected Printer Check ( #14924 )
2019-08-13 23:38:45 -05:00
teemuatlut
d4974ea719
TMC SPI Endstops and Improved Sensorless Homing ( #14044 )
2019-08-04 22:22:58 -05:00
rafaljot
e44fccf3d2
Add support for M575 ( #14757 )
2019-07-30 02:30:00 -05:00
MarcelMo
f8aa52346f
Configurable Z move distance ( #14593 )
2019-07-30 02:16:26 -05:00
Marcio Teixeira
eefe3f595a
New options: Bootscreen as Info, game Easter-egg ( #13829 )
2019-07-28 22:47:20 -05:00
Scott Lahteine
6b02b89ab4
Update serial sub-unit descriptions
2019-07-28 17:38:37 -05:00
Giuliano Zaro
290466578f
Adafruit Grand Central M4 ( #14749 )
2019-07-28 14:48:29 -05:00
Scott Lahteine
5c3ec6306f
Max7219 side-by-side arrangement ( #14702 )
2019-07-22 05:22:21 -05:00
Scott Lahteine
b3f42d2519
Update SD host config comment
2019-06-28 19:13:27 -05:00
Scott Lahteine
93cd66ac11
Tweaky change from (C) to (c)
2019-06-27 23:58:16 -05:00
Scott Lahteine
d7d80418ae
Singleton for cutting tools ( #14429 )
2019-06-27 23:06:49 -05:00
Scott Lahteine
00cc1079af
Add missing chamber auto fan options
2019-06-27 16:05:47 -05:00
Andy Shaw
064177154c
Update SD card connection / sharing options ( #14325 )
2019-06-26 03:55:57 -05:00
InsanityAutomation
aa0383a83b
Enhance IDEX toolchange auto-return w/ no park, full control ( #14117 )
2019-06-23 20:00:48 -05:00
InsanityAutomation
a9acd2f497
G34 configurable angle limit ( #14321 )
2019-06-20 21:18:36 -05:00
Scott Lahteine
a31cb910f5
Tweak some config spacing
2019-06-20 21:08:47 -05:00
Scott Lahteine
4df4c47994
Add TMC2209 support ( #14249 )
2019-06-20 15:47:50 -05:00
Scott Lahteine
dd06017f64
Bring configs up to date
2019-06-19 01:03:51 -05:00
Scott Lahteine
aacb904e1f
Adjust some config comments
2019-06-17 20:22:07 -05:00
mb300sd
bf8bfb5c66
Add Coolant Control M7/M8/M9 ( #10745 )
2019-06-13 18:43:11 -05:00
Scott Lahteine
f7792c0192
Group manual move options
2019-06-12 19:49:18 -05:00
Kaushik Vemparala
c88d9ae282
Option to leave heaters set on SD abort ( #14251 )
2019-06-10 23:57:55 -05:00
InsanityAutomation
b7eeb5b13b
Move BLTouch options to adv config ( #14131 )
...
Plus other BLTouch and menu enhancements.
2019-06-10 17:46:42 -05:00
Scott Lahteine
0ca2073625
ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED => SD_ABORT_ON_ENDSTOP_HIT
2019-06-10 17:28:35 -05:00
teemuatlut
cccc51ee0e
TMC Square Wave Stepping mode ( #14195 )
2019-06-09 05:08:05 -05:00
InsanityAutomation
4138b1f9ae
Option to disable Case Light brightness control ( #14165 )
2019-06-07 07:23:42 -05:00
InsanityAutomation
123e58d9c3
Heated Chamber for Graphical LCD ( #14190 )
2019-05-30 18:31:50 -05:00
Scott Lahteine
7cce6b8d68
Bring configs up to date (MANUAL_FEEDRATE)
2019-05-25 16:31:13 -05:00
Scott Lahteine
9bf65eacaa
Remove old adv config heading
2019-05-19 15:24:01 -05:00
Scott Lahteine
785c01f2bc
Use US spelling of 'behavior'
2019-05-15 01:49:17 -05:00
chai-md
940ff8e7c8
Improve LV8729 stepping ( #13776 )
2019-05-11 19:02:19 -05:00
Tanguy Pruvot
11adcf1ce3
Add'l PLR options, AVR strstr_P compat ( #13880 )
2019-05-07 20:38:40 -05:00
Stephan
483822f3aa
Fix some THERMAL_PROTECTION_CHAMBER issues ( #13678 )
2019-05-06 19:55:01 -05:00
doggyfan
23a8707ef1
Configurable Thermistor ( #13888 )
2019-05-06 18:51:06 -05:00
InsanityAutomation
3fcab8dbf1
Option to disable fans during pause ( #13820 )
2019-05-04 15:50:44 -05:00
Robby Candra
0181e57417
Add a minimum Z change option to power-loss recovery ( #13859 )
2019-05-02 22:29:05 -05:00
Roxy-3D
142c8e2fed
Remove redundant Frivolous Game Options
2019-04-28 14:03:53 -05:00
Scott Lahteine
9ccbd382e7
Update Watchdog description
2019-04-27 14:56:12 +02:00
Bob-the-Kuhn
db89fc0304
Revert "bring my copy up to date"
...
This reverts commit 503905c628
2019-04-25 17:38:41 -05:00
Bob-the-Kuhn
503905c628
bring my copy up to date
2019-04-25 12:08:49 -05:00
Bob-the-Kuhn
520585c5ed
Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x
2019-04-17 15:34:29 -05:00
jmdearras
5f49b65c1f
Move LPC SD options to configs, add MKS_MINI_DISPLAY to SKR boards ( #13712 )
2019-04-15 22:55:33 -05:00
Bob-the-Kuhn
9dd4252b39
Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x
2019-04-12 22:07:12 -05:00
Stephan
84273557f9
Move and update heated chamber settings ( #13671 )
...
Co-Authored-By: the-real-orca <stephan.veigl@gmail.com>
2019-04-12 15:38:10 -05:00
Scott Lahteine
cee3b172b9
Fix Marlin splash screen logic ( #13646 )
2019-04-10 17:14:57 -05:00
InsanityAutomation
ba31d39f6d
Azteeg X5 Mini support ( #13425 )
2019-04-08 23:10:45 -05:00
Scott Lahteine
9abe9aff56
Confirm before starting SD print ( #13616 )
2019-04-08 13:44:35 -05:00
Roxy-3D
9cee81d47e
Option to show babysteps total since G28 ( #13580 )
2019-04-06 18:04:34 -05:00
Scott Lahteine
3221658a78
Adjust park position description
2019-04-05 20:40:50 -05:00
Marcio Teixeira
27a4927ed1
Add option to move away from endstop after homing. ( #13557 )
...
Add option to move away from endstop after homing.
- Add `ENDSTOP_BACKOFF` for printers with a recessed Z home button (Lulzbot TAZ 6).
- Also prevents chattering when sensorless homing with axes against bumpers.
2019-04-04 02:47:19 -05:00
Robby Candra
46445a5a16
Event G-code for Stop SD Print ( #13547 )
...
Co-Authored-By: 7eggert <7eggert@gmx.de>
Co-Authored-By: robbycandra <robbycandra.mail@gmail.com>
2019-04-02 22:09:30 -05:00
Scott Lahteine
8b7c3eec83
Games, for fun (and stress-testing) ( #13464 )
2019-04-01 17:48:54 -05:00
Scott Lahteine
5de7b5b35e
Games, for fun (and stress-testing) ( #13464 )
2019-04-01 15:43:48 -05:00
InsanityAutomation
7240e3a68f
Allow G26 with no heated bed ( #13511 )
2019-03-29 13:32:43 -05:00
Sam Lane
e3ab54753b
Add extra Linear Advance factors ( #13490 )
2019-03-26 04:02:27 -05:00
Scott Lahteine
d2e0c03afb
Remove trailing whitespace
2019-03-25 20:51:38 -05:00
7eggert
d96f7d6068
Minimum segments for G2/G3. Better for small arcs. ( #13466 )
2019-03-24 19:53:47 -05:00
Scott Lahteine
49cf92dc36
Extended condition macros ( #13419 )
...
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
2019-03-16 23:43:06 -05:00
InsanityAutomation
09eb30dc05
IDEX Mirror mode based on Formbot / Vivedino Symmetric mode ( #13404 )
2019-03-15 22:46:27 -05:00
Hadrien Jouet
0278ad0a6d
Add ESP32 WiFi interface ( #11209 )
2019-03-13 00:48:08 -05:00
InsanityAutomation
050eac03af
Single X Duplication Extension ( #13373 )
...
* Multi-nozzle selective duplication
* Use a bit-mask, reduce stepper_indirection.h size
* Tweak the multi-nozzle duplication description
* Use 'S' as a bool in M605
* Add HAS_DUPLICATION_MODE conditional
* Remove '_MODE' from the option name
* M605 in the style of Stacker M280
* Also include direct mask style (P)
2019-03-13 00:42:50 -05:00
Michiel Baird
b824a517aa
Add G38.4 and G38.5 ( #13348 )
2019-03-10 17:22:09 -05:00
Reece Kibble
dbead66988
Allows user to set (almost) any PWM frequency ( #12638 )
2019-03-08 02:15:42 -06:00
3dlabsio
645ca7af7a
M141 Heated Chamber, Temperature rework ( #12201 )
2019-03-07 02:09:39 -06:00
InsanityAutomation
bf8b38e0f7
Relocate configs above Marlin/src folder ( #13299 )
2019-03-03 16:50:56 -06:00
Scott Lahteine
998ce55be0
Alternative fan bitmap
2019-02-28 22:08:20 -06:00
Chris Pepper
4ab433d391
Fix binary protocol with one serial port ( #13270 )
...
- The `sdcard.transfer_port` variable is Marlin's internal serial port index, not the physical serial port number.
- Added packet number to "ok" response so hosts don't need to wait for the ACK.
- Renamed feature to `BINARY_FILE_TRANSFER`, as the speed up is only consequential to the ability to transfer binaries over serial.
2019-02-27 19:57:48 -06:00
InsanityAutomation
eb4bf93ea4
Add more Babystep options ( #13262 )
2019-02-27 04:38:56 -06:00
Scott Lahteine
1424b368cf
Tweak M122 comment in configs
2019-02-19 16:20:18 -06:00
Scott Lahteine
e00aad84af
Add M240 parameters D I J R S
2019-02-14 20:00:40 -06:00
Scott Lahteine
d2bdb71c13
Add PHOTO_GCODE option, photo trigger physical move ( #13168 )
2019-02-14 15:09:35 -06:00
revilor
e56c13670d
Service interval watchdog ( #13105 )
2019-02-12 15:58:56 -06:00
InsanityAutomation
7f1b69b0c8
Add HOST_PROMPT_SUPPORT ( #13039 )
2019-02-12 15:55:47 -06:00
Scott Lahteine
0feeef2604
Update copyright in headers
2019-02-12 15:30:11 -06:00
Scott Lahteine
5a316664e5
Update chopper timing
2019-02-10 03:12:20 -06:00
Marcio Teixeira
e1604198ff
G425 — Auto-calibrate Backlash and Nozzle Offsets ( #13050 )
2019-02-06 17:20:17 -06:00
InsanityAutomation
413e303ad5
More Advanced Pause options ( #12984 )
2019-02-06 06:39:42 -06:00
teemuatlut
d81342254a
Support new TMC drivers ( #13026 )
2019-02-06 06:33:14 -06:00
Nicolas G
6fb4001b58
Add option to disable fan speed slowing in M303 ( #13066 )
2019-02-04 00:12:41 -06:00
Scott Lahteine
38c2ca9281
Clean up trailing whitespace
2019-02-03 23:00:57 -06:00
revilor
6a57d0b381
Prusa MMU2 ( #12967 )
2019-01-31 19:10:52 -06:00
Scott Lahteine
996f7d1642
Fix I2C_POSITION_ENCODERS commentary
2019-01-30 22:17:17 -06:00
InsanityAutomation
48a3502656
Remote streamer improvements ( #12982 )
2019-01-27 22:43:13 -06:00
Scott Lahteine
ae91914260
Prevent name conflicts with mixed stepper drivers
2019-01-24 01:25:28 -06:00
Scott Lahteine
0eca236dcd
Fix L6470 config comments
2019-01-24 00:58:16 -06:00
Bob Kuhn
2f35747f29
L6470 SPI daisy chain support ( #12895 )
2019-01-23 19:06:54 -06:00
Scott Lahteine
e1f951813a
Remove old block end comment
2019-01-20 02:30:03 -06:00
teemuatlut
e6805582a6
M569 to change stepping mode. Add new TMC section to LCD. ( #12884 )
2019-01-17 13:17:16 -06:00
teemuatlut
1a79878dff
Remove TMC_Z_CALIBRATION in favor of Z_STEPPER_AUTO_ALIGN
2019-01-12 18:07:28 -06:00
InsanityAutomation
082f6a27de
ADAPTIVE_FAN_SLOWING extension to hotend thermal protection ( #12853 )
2019-01-12 00:41:48 -06:00
Scott Lahteine
5f2d75f45b
Move PINS_DEBUGGING to @section develop
2019-01-08 20:05:05 -06:00
Kaushik Vemparala
ba7e35cbab
Add LCD option BEEP_ON_FEEDRATE_CHANGE ( #12774 )
2019-01-04 19:30:08 -06:00
Scott Lahteine
371d9a1acf
Fix line-endings, formatting, whitespace
...
Followup to #12770
2018-12-30 15:38:20 -06:00
Ludy
cfc5e96b4b
Move JD to Config.h (and fix jerk->eeprom bug) ( #12720 )
2018-12-27 15:29:39 -06:00
teemuatlut
7a5e637a37
Add spreadCycle parameter sets ( #12645 )
2018-12-18 12:42:14 -06:00
Dave Johnson
9a4a463ec4
Sanity-check LIGHTWEIGHT_UI, move comment up ( #12630 )
2018-12-12 16:59:20 -06:00
teemuatlut
55144284c2
TMC connection test, spreadCycle parameters, improved debugging ( #12616 )
2018-12-09 20:54:48 -06:00
Marcio Teixeira
b22716e938
M425 Backlash Correction ( #11061 )
2018-12-08 14:36:46 -06:00
teemuatlut
50b2fbd031
Trinamic: Split stealthChop, improve driver monitoring, etc. ( #12582 )
2018-12-07 15:34:21 -06:00
Scott Lahteine
7a361ad36a
Alternative fan image option ( #12579 )
...
* Alternative fan bitmap
* Move bed over by 3px
2018-12-03 05:55:33 -06:00
Scott Lahteine
4f9ec9ab45
Add heating progress bars ( #12543 )
2018-11-27 21:15:52 -06:00
Scott Lahteine
b57343c255
Put status screen options in Configuration_adv.h
2018-11-23 23:15:07 -06:00
Scott Lahteine
1fcc13b011
Allow Serial Overrun Protection to be disabled
2018-11-23 21:07:38 -06:00
Scott Lahteine
30a49f5ee2
Apply extra condition to LCD_PROGRESS_BAR
2018-11-11 08:36:10 -06:00
revilor
b60abc7c37
[2.0.x] Macro G-codes ( #9365 )
2018-11-09 05:25:08 -06:00
InsanityAutomation
6471a75a22
Combine more tool-change variables ( #12137 )
2018-11-06 22:22:20 -06:00
Scott Lahteine
3866aeac52
Clean up ENCODER_RATE_MULTIPLIER config
2018-11-05 04:17:37 -06:00
Scott Lahteine
498dfa291e
Update and fix CHDK
2018-11-05 04:17:37 -06:00
Scott Lahteine
549d11225a
Add to description of Z_STEPPER_AUTO_ALIGN
...
In response to #12272
2018-10-31 18:07:20 -05:00
Chris Pepper
66d44c72c3
Add fast binary file transfer to SD card option ( #12249 )
2018-10-30 19:44:12 -05:00
Scott Lahteine
9e663a624b
Apply #pragma once to configuration files
2018-10-30 18:35:12 -05:00
Scott Lahteine
98c32d8df1
Fix a config endif label
2018-10-30 18:28:16 -05:00
TheLongAndOnly
5536228359
G34 Auto-align multi-stepper Z axis ( #11302 )
2018-10-29 14:01:36 -05:00
Scott Lahteine
182b1405d9
LCD conditionals in configurations
2018-10-28 15:46:45 -05:00
Scott Lahteine
e8031b1152
Add Custom Microstepping options
2018-10-25 11:26:32 -05:00
TheSFReader
a07ac6312f
G0 feedrate may be fixed or variable ( #12172 )
2018-10-25 10:35:16 -05:00
Ludy
a93e9e6e9b
Use preheat labels in place of PLA/ABS ( #12194 )
2018-10-23 15:38:17 -05:00
Scott Lahteine
9090065e9f
Move EXTRA_FAN_SPEED above FWRETRACT
2018-10-19 15:15:00 -05:00
Scott Lahteine
67a3c5a16a
Alternative info screen (Prusa-style) ( #12132 )
...
* Fix Z value display
* Add HAS_PRINT_PROGRESS
* Alternative Info Screen option
* Add LCD_INFO_SCREEN_STYLE to example configs
2018-10-18 11:34:52 -05:00
InsanityAutomation
3ec3872730
Single Z raise value for all tool-changing / parking ( #12090 )
...
* Universal tool-change Z lift
* Add TOOLCHANGE_ZRAISE to example configs
* Park/unpark changes to example configs
* Implement DEBUG_DXC_MODE
2018-10-17 11:11:41 -05:00
Scott Lahteine
8bf596bd4c
RETRACT_ZLIFT => RETRACT_ZRAISE
2018-10-16 16:46:40 -05:00
Scott Lahteine
84b59d58fb
Clean up whitespace
2018-10-16 02:02:20 -05:00
TheSFReader
af939c158a
Option for G0 to have a separate feedrate ( #12089 )
2018-10-16 01:49:51 -05:00
Scott Lahteine
43940d59ed
Fix trailing spaces
2018-10-10 16:24:35 -05:00
Scott Lahteine
cf5284cdf2
Add SD Firmware Update capability ( #12043 )
...
Co-Authored-By: timoxd7 <timoxd7@users.noreply.github.com>
2018-10-09 20:00:47 -05:00
Scott Lahteine
07db08e39d
Fix EXTRUDER_AUTO_FAN_SPEED comment
2018-10-06 19:51:17 -05:00
Scott Lahteine
ca0e308105
Fix up some units comments
2018-10-06 19:45:50 -05:00
Scott Lahteine
52a37913c1
Extend and apply some corrections
2018-10-06 00:27:21 -05:00
thesfreader
e09c144674
Add CNC-like G-code options
2018-10-06 00:15:27 -05:00
Marcio Teixeira
2067619a26
Add USB_FLASH_DRIVE_SUPPORT
2018-10-04 19:54:12 -05:00
Scott Lahteine
bb561baf9e
Tweak some config comments
2018-10-04 02:42:12 -05:00
Thomas Moore
ab4549d2bc
[2.0.x] Add simultaneous retraction for mixing extruder ( #11941 )
2018-10-01 23:32:02 -05:00
dot-bob
b0fd8f2d74
Add option to move Z on double-click when idle
2018-10-01 01:41:11 -05:00
Scott Lahteine
e78bdd654d
Clean up BABYSTEP options
2018-10-01 01:29:21 -05:00
Scott Lahteine
3c40933713
Remove trailing spaces, old comment
2018-09-30 20:47:06 -05:00
Thomas Moore
3286325044
Add TMC2130 sensorless probing
2018-09-29 18:54:14 -05:00
Victor Tseng
93839e2f73
Add option to enable/disable autoretract altogether ( #11904 )
2018-09-28 16:52:56 -05:00
Scott Lahteine
241168926d
Update some configs
2018-09-27 16:42:59 -05:00
Scott Lahteine
cee34f7290
Followup for BABYSTEP_HOTEND_Z_OFFSET ( #11916 )
2018-09-24 21:46:56 -04:00
teemuatlut
884ad75cb8
Update config files
2018-09-24 17:26:18 -04:00
InsanityAutomation
1104054d73
2.0 IDEX Independent z offset and other fixes ( #11862 )
...
* Add Formbot Raptor board
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
* Add a second Z probe Z offset
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
* Modify method to utilize live adjustment of hotend z offset
Should probably move config option to babystepping and rename as it may now apply to all multiextruder systems
* Move config item and catchup other code to current method
2018-09-24 09:40:48 -05:00
Scott Lahteine
ddcbf80f23
Followup for Z_TRIPLE_ENDSTOPS
2018-09-23 12:22:31 -04:00
Roxy-3D
d3d6be8210
Add MAX7219 reverse units option ( #11860 )
2018-09-19 18:54:51 -05:00
InsanityAutomation
f38570ac55
Add custom user menu title ( #11769 )
2018-09-19 15:04:34 -05:00
Scott Lahteine
f5c210d33d
Config changes supporting up to 6 extruders
2018-09-16 22:22:35 -05:00
Holger Müller
1a6f2b29b8
Add support for Triple-Z steppers/endstops
2018-09-16 00:35:58 -05:00
Scott Lahteine
f79a5a9dee
Tweak spacing of L6470 options
2018-09-12 23:18:11 -05:00
Sam Lane
1b6bc19427
Add external closed loop controller support
2018-09-10 03:17:17 -05:00
Marcio Teixeira
beb51c2d58
Show manual extrusion moves as relative in LCD
...
- Implements FR#11724
- Old behavior can be restored by commenting out MANUAL_E_MOVES_RELATIVE
2018-09-06 02:00:25 -05:00
Scott Lahteine
e3fc9aa35f
Update some config comments
2018-08-31 16:03:44 -05:00
Michael Triffon
f8c52c9c29
Azteeg X5 Mini WiFi support ( #11601 )
2018-08-21 23:58:26 -05:00
Scott Lahteine
2d3317a35b
Prettify Dual X Carriage description
2018-08-21 23:34:29 -05:00
Greg Nutt
a1a5367380
Smoothieboard V1.0/1.1 and A5984 support
2018-08-09 23:03:17 -05:00
Scott Lahteine
9c62c47579
[2.0.x] Fix Dual X Carriage tool change crash ( #11447 )
2018-08-03 20:47:29 -05:00
teemuatlut
fbcdf5eaeb
Simplify stepper driver per-axis selection
2018-07-25 02:47:43 -05:00
Roxy-3D
9660996cc3
Add Multi Unit Support for Max7219 to bugfix_2.0.0 ( #11285 )
...
* Add Multi Unit Support for Max7219 to bugfix_2.0.0
* Apply multi-MAX7219 to example configs
* Tweak some spacing, macros
2018-07-19 13:56:47 -05:00
Scott Lahteine
665ac1e4d0
Add POWER_LOSS_PIN support
2018-07-18 19:55:10 -05:00
Scott Lahteine
e0ab8acf19
Add "Marlin Dev Mode" option
2018-07-02 22:55:21 -05:00
Scott Lahteine
bd7f5848f1
Remove JUNCTION_DEVIATION_INCLUDE_E option ( #11147 )
2018-06-29 22:42:05 -05:00
etagle
5b49fccf80
Add stepper driver DIR delay configuration option
...
...and recommended pulse width configuration for A4988
2018-06-26 13:28:04 -05:00
Scott Lahteine
d4795e5b8e
[2.0.x] Tweaks and additions for MAX7219 ( #11034 )
2018-06-18 22:04:03 -05:00
Simon Jouet
e2aeda61ed
HAL for Espressif ESP32 Wifi
2018-06-13 19:33:35 -05:00
etagle
6f14bcaa3e
Add MAXIMUM_STEPPER_RATE, enforce in multi-stepping
...
The timing value should be properly set for ALL boards. The compiler will check and set maximum step rate calculations based on those values.
2018-06-10 16:02:47 -05:00
etagle
39a7e7720d
Adaptive multiaxis step smoothing
...
- Stepper bugs fixed
- Support MIXING_EXTRUDER with Linear Advance
- Miscellaneous cleanup
2018-06-10 16:02:47 -05:00
Scott Lahteine
8a376e6beb
Update MINIMUM_STEPPER_PULSE description
2018-06-10 00:13:03 -05:00
Scott Lahteine
2deff0d9b9
Fix/Improve junction deviation
...
- Respect axis max acceleration limits instead of forcing a fixed acceleration value.
- The `junction_unit_vec` ensures proper handling of entry and exit speeds even when the axes involved have different limits.
2018-05-31 20:09:53 -05:00
Scott Lahteine
2e139fe50f
Tweak configuration spacing
2018-05-26 18:33:51 -05:00
Scott Lahteine
931ab4ec40
Rename Junction Deviation options
2018-05-26 18:33:51 -05:00
Jiri Jaburek
43ddb29f9e
Add FAN_MAX_PWM for M106-controlled fans
2018-05-15 21:18:46 -05:00
Scott Lahteine
acacee80a2
Add JUNCTION_ACCELERATION_FACTOR to configs
...
Part of #10688
Co-Authored-By: ejtagle <ejtagle@hotmail.com>
2018-05-11 23:13:27 -05:00
Scott Lahteine
4d4bf7897d
Junction Deviation jerk limiting option
2018-05-08 10:08:54 -05:00
Scott Lahteine
840ff60952
Bring some configs up to date
2018-05-06 02:42:27 -05:00
nightdemonx
e911635fb1
Add thermocouple with AD8495 support
2018-05-02 08:43:16 -05:00
Scott Lahteine
05c33833e7
[2.0.x] Add NO_LCD_MENUS option ( #10582 )
2018-04-30 21:16:31 -05:00
Scott Lahteine
11ab017dd0
Creality3D Power-Loss Recovery
2018-04-21 21:56:50 -05:00
Marcio Teixeira
5cc7916e69
Add G29_RETRY_AND_RECOVER feature
...
- Add an option to retry G29, optionally executing a G-code procedure after each failed probe.
2018-04-19 19:45:53 -05:00
Sean
2d9b0a66fe
Add Filament Change accelerations
2018-04-09 23:57:27 -05:00
Lenbok
0e8242180d
Chamber temperature monitoring and auto fan control.
...
This is an initial cut for feedback, updated for 2.0.x.
Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?
Chamber temperatures are not reported on the LCD in any way.
When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.
As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
2018-04-06 23:09:06 -05:00
Sean
2fa0a73c2c
Implement filament change continuous purge
2018-04-04 20:57:51 -05:00
Scott Lahteine
1d22609473
MIN_PROBE_EDGE replaces DELTA_PROBEABLE_RADIUS
2018-03-19 04:11:46 -05:00
Marcio Teixeira
c24dbcbfe1
When STATUS_EXPIRE_SECONDS is 0, hide the position. ( #10081 )
...
Some users may prefer to hide the position updates on the `LIGHTWEIGHT_UI` altogether. This leads to an even less cluttered display (it also saves on SPI traffic and one byte of RAM).
2018-03-14 02:44:30 -05:00
Studiodyne
e7a61de8af
[2.0] FWRetract Reset (Best way) ( #10083 )
2018-03-14 01:35:30 -05:00
Scott Lahteine
e7570f3195
Improve TMC config organization, naming
2018-03-14 00:18:41 -05:00
Bob-the-Kuhn
6b4a928145
2uS default step pulse ( #9989 )
2018-03-07 21:11:01 -06:00
Scott Lahteine
94f5204629
Move AUTO_REPORT_SD_STATUS to SDSUPPORT block
2018-03-07 01:50:30 -06:00
Scott Lahteine
b198b49d15
Followup to AUTO_REPORT_SD_STATUS
...
Followup to #9832
2018-03-07 00:13:42 -06:00
Studiodyne
23a576faf7
[2.0] Fix for FW retract ( #9878 )
2018-03-01 15:15:40 -06:00
Scott Lahteine
b8485528b2
Prettify LCD_PROGRESS_BAR options
2018-02-23 19:19:57 -06:00
Scott Lahteine
e65a853c59
Fix LCD_PROGRESS_BAR
...
Fix #9208
2018-02-23 14:05:10 -06:00
Scott Lahteine
2bd252b501
[2.0.x] LIN_ADVANCE v1.5 ( #9712 )
2018-02-23 00:53:29 -06:00
Marcio Teixeira
532bb3aaa1
Lightweight status screen for ST7920
...
- This status screen uses the ST7920 character generator to greatly
reduce SPI traffic and MCU load when updating the status screen.
- Has been tested with the RepRapDiscount Full Graphics Smart Controller
but should work with any LCD that uses an ST7920 or fully compatible
controller.
2018-02-22 00:10:43 -06:00
Scott Lahteine
59c98d6fd5
Hephestos2 heated bed kit for all ( #9757 )
2018-02-21 22:27:09 -06:00
Kevin
9019ea0fce
Option to force X or Y to home first when homing the other axis
2018-02-18 01:11:41 -06:00
blye
330437ad7c
Update LCD_SET_PROGRESS_MANUALLY in configs
2018-02-17 08:12:10 -06:00
Bob-the-Kuhn
349dafa728
config update (set to -1)
2018-02-15 21:42:54 -06:00
Scott Lahteine
5b70d3da1c
Update DIGIPOT_I2C_MOTOR_CURRENTS comments
2018-02-13 22:54:12 -06:00
Scott Lahteine
694d2ebec0
TMC SW SPI pins in Configuration_adv.h
...
Counterpart to #9632
2018-02-08 18:49:38 -06:00
Thomas Moore
1541224a81
Enable Z axis and delta sensorless homing ( #9516 )
2018-02-08 04:20:44 -06:00
Scott Lahteine
b2f8b4ada5
I2C position encoders update ( #9533 )
...
Updating I2C position encoders to enable babystepping and Babystep XY when using the ecm microstep correction method. Also changed default method to ECM microstep.
2018-02-08 03:57:11 -06:00
Manuel Valentino
374f2a5e16
[2.0.x] Fixed wrong information about TMC2208 wiring ( #9335 )
2018-02-02 04:45:55 -06:00
teemuatlut
5c69d45f5b
[2.0.x] TMC2130 support for LPC platform ( #9114 )
2018-02-01 21:49:40 -06:00
Scott Lahteine
8190fdb260
[2.0.x] Option to use Neopixel as case light ( #9270 )
...
* Add option to use Neopixel as case light
* Apply CASE_LIGHT_USE_NEOPIXEL to example configs
2018-01-20 16:58:41 -06:00
Scott Lahteine
02ff12d491
More up front option to show SD percentage
2018-01-14 23:32:39 -06:00
Scott Lahteine
5c076a6d93
Improved M915 description
2018-01-09 18:56:27 -06:00
teemuatlut
cdc61ebf53
Add M915 configuration option
2018-01-09 18:28:48 +02:00
Scott Lahteine
7541316bb4
Add M701/M702 Filament Load/Unload, M603
2018-01-04 15:07:37 -06:00
Scott Lahteine
2929c9e56f
A specific option to SLIM_LCD_MENUS
2017-12-31 00:11:22 -06:00
Scott Lahteine
f704f405af
Add pause/resume actions on M600, M125
2017-12-25 01:39:18 -06:00
Thomas Moore
f0a8a1a853
[2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE ( #8866 )
...
* Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
2017-12-25 01:38:06 -06:00
Scott Lahteine
fdc5e72720
A single setting to validate filament width
2017-12-19 21:33:25 -06:00
Scott Lahteine
933f76fda3
Option to disable all volumetric extrusion
2017-12-19 19:51:25 -06:00
robpower
5595098063
V2 Extended NanoDLP_Z_Move_Sync to G4 & G28,Added all axis option.
2017-12-15 16:22:55 -06:00
teemuatlut
0cd1e91056
[2.0.x] TMC driver update ( #8769 )
2017-12-15 15:03:14 -06:00
Scott Lahteine
ae663a4198
PROBE_DOUBLE_TOUCH => MULTIPLE_PROBING
2017-12-07 16:44:13 -06:00
Scott Lahteine
8f90642eea
LED_CONTROL_MENU config changes
2017-11-29 21:02:56 -06:00
Tannoo
cf0f78336b
New Feature: LED_CONTROL_MENU
2017-11-29 21:02:55 -06:00
Scott Lahteine
a67cf78c6b
Clean up whitespace, spacing
2017-11-26 20:18:52 -06:00
Scott Lahteine
7be4857ab9
Tweak BLOCK_BUFFER_SIZE description
2017-11-26 17:36:40 -06:00
Scott Lahteine
5926c9c97b
Followup for MESH_EDIT_GFX_OVERLAY
2017-11-24 15:53:25 -06:00
Scott Lahteine
dc82babe8e
Implement NANODLP_Z_SYNC for 2.0.x
2017-11-24 00:28:06 -06:00
Scott Lahteine
54774841ba
Merge pull request #8416 from thinkyhead/bf2_M114_DETAIL
...
[2.0] Add M114_DETAIL to Configuration_adv.h
2017-11-14 00:28:55 -06:00
Scott Lahteine
009e3a7aa7
Add M114_DETAIL to Configuration_adv.h
2017-11-14 00:03:17 -06:00
Scott Lahteine
3f0a982b8c
Move Filament Width Sensor to Configuration_adv.h
2017-11-13 21:05:57 -06:00
Scott Lahteine
95ea43bde4
Update XYZ dual stepper configurations
2017-11-08 20:31:43 -06:00
Roxy-3D
ed62c621d7
Fix G26 Circle Drawing. Add Default Extrusion Settings ( #8313 )
...
- Fix G26 Circle Drawing.
- Add default extrusion settings so machine can print lines on print bed
- Yet to be done: Get LCD Menu's to use these settings.
2017-11-07 17:13:53 -06:00
Scott Lahteine
2c099fd4c2
Update Thermal Protection Documentation
2017-11-07 15:46:44 -06:00
Scott Lahteine
1b42fba39b
Add CNC_COORDINATE_SYSTEMS to configs
2017-11-04 22:28:46 -05:00
Scott Lahteine
ce1c9c0808
Tweak QUICK_HOME description
2017-10-29 23:48:13 -05:00
Scott Lahteine
e04425281d
Add Dual Steppers / Endstops to configs
2017-10-29 18:56:04 -05:00
Scott Lahteine
edff2c917b
Cleanup for DIGIPOTS settings
2017-10-29 18:56:03 -05:00
Scott Lahteine
6b1d1a818b
Revert default BABYSTEP_MULTIPLICATOR to 1
2017-10-27 19:45:44 -05:00
Scott Lahteine
7fad26549b
Concise SD_REPRINT_LAST_SELECTED_FILE description
2017-10-26 23:33:02 -05:00
Roxy-3D
3f5f39576b
Reprint option for last SD Memory card file ( #8106 )
...
* Re-Print of same SD Memory Card file with single click
* Re-Print of same SD Memory Card file with single click
* This is the bugfix-v2.0.0 version of https://github.com/MarlinFirmware/Marlin/pull/8104
2017-10-26 15:50:18 -05:00
Scott Lahteine
7f55d82fd1
Move UBL_SAVE_ACTIVE_ON_M500 to Configuration.h
2017-10-24 18:26:43 -05:00
Scott Lahteine
580b6e9089
Apply physical limits to mesh bounds
2017-10-24 16:54:07 -05:00
Scott Lahteine
3d2b2eb1ca
Prevent SDCARD_SORT_ALPHA from exploding
2017-10-20 19:13:21 -05:00
Scott Lahteine
783ddf9691
Add SCROLL_LONG_FILENAMES option
2017-10-20 19:13:21 -05:00
Thomas Moore
67cc29cd3c
Update UBL mesh boundaries to accomidate beds centered at 0, 0 ( #8012 )
2017-10-18 10:03:30 -05:00
Scott Lahteine
ce48403a0b
Add EXTRA_FAN_SPEED feature
...
Based on #7883 by @studiodyne
2017-10-16 02:34:13 -05:00
Scott Lahteine
5c4f3e0107
Add LCD_SET_PROGRESS_MANUALLY
2017-10-15 03:05:29 -05:00
Bob-the-Kuhn
4e3ee845b9
config_adv ( #7941 )
...
get rid of twi.h
move to board files
2017-10-11 15:42:24 -05:00
Scott Lahteine
b30b55307c
Merge pull request #7909 from thinkyhead/bf2_goodbye_legacy_advance
...
[2.0.x] Remove legacy ADVANCE feature
2017-10-10 00:31:18 -05:00
Scott Lahteine
560d366b80
Move VIKI SCK/MOSI pins fix to Conditionals_POST.h
2017-10-09 16:13:49 -05:00
Scott Lahteine
03f4891fb9
Remove legacy ADVANCE feature
2017-10-09 04:25:18 -05:00
Scott Lahteine
508d764d63
Add serial XON/XOFF handshaking
...
From @ejtagle, originally #7459
2017-10-02 04:12:30 -05:00
