MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
8,766 Commits 1 Branch 0 Tags 96 MiB
82df656cc7
Commit Graph

7237 Commits

Author SHA1 Message Date
Luc Van Daele
0e4b6b373d [1.1.x] G33 magic numbers (#8173) 
* [1.1.x] G33 magic numbers

* oops

* comments

* oops

* warning

* better comment section

* remarks

* extra grids
 2017-11-03 03:35:53 -05:00
Scott Lahteine
193a0e9273
pid_autotune parity with 2.0.x 2017-11-03 03:26:47 -05:00
Rowan Meara
39cc36d3f1 [1.1.x] M303 thermal runaway protection (#8209) 
* Added M303 thermal runaway protection

Currently, thermal runaway protection is not available during M303.
Therefore, if someone plugs the thermistors in incorrectly and goes to
autotune their printer, the printer temperature could runaway and damage
could occur.

* Replace removed line, clarifying its logic
 2017-11-03 03:16:39 -05:00
Scott Lahteine
87d3a1ae4d
Merge pull request #8228 from tcm0116/1.0.x-dual_stepper 
[1.1.x] Fix automatic stepper assignment for X/Y/Z dual stepper drivers
 2017-11-03 03:08:43 -05:00
AnHardt
dcd7949544 Fix watchdog in WATCHDOG_RESET_MANUAL mode AVR 2017-11-03 04:45:13 +01:00
Thomas Moore
277eb16d67 Fix automatic stepper assignment for X/Y/Z dual stepper drivers 2017-11-02 18:50:25 -05:00
jmdearras
c9980c0a5c Restore MKS_GEN_L 
Removed by accident, I presume, when the file was cleaned up
 2017-11-02 12:14:54 -04:00
jmdearras
3e9504d306 Fix case light "off" function (#8205) 
* Fix case light "off" function

It would only turn the light off if brightness was 255

* Update Marlin_main.cpp
 2017-11-01 21:17:23 -05:00
Scott Lahteine
4bf0e15653 Allow asterisks in G-Code commands 
Addressing #6655
 2017-10-31 21:14:56 -05:00
Scott Lahteine
f02ca2a9a3 Organize boards.h by architecture 2017-10-31 16:12:07 -05:00
Scott Lahteine
4fb3ce4739 Support for SilverGate Board 2017-10-31 15:26:27 -05:00
Scott Lahteine
704640bf98 Faster menu navigation for Anet A8 
Addressing #8166
 2017-10-31 14:44:48 -05:00
Scott Lahteine
db6de76acb Only show custom bootscreen once 2017-10-31 01:52:35 -05:00
GMagician
15be1cb9a9 [1.1.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour (#8177) 
* [1.1.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour

NO_MOTION_BEFORE_HOMING should prevent XYZ movements only when homing is not done.
E axes should be allowed

* Update Marlin_main.cpp

* Update Marlin_main.cpp

* Update Marlin_main.cpp
 2017-10-30 22:50:50 -05:00
Scott Lahteine
893092ff7f Kinematic clamp_to_software_endstops 2017-10-30 16:24:45 -05:00
Scott Lahteine
8b7c1e9cec Fix for MAX_VFAT_ENTRIES sanity check 2017-10-30 16:24:45 -05:00
Scott Lahteine
393ceb28fc The plural of 'axis' is 'axes' 2017-10-30 14:49:51 -05:00
Scott Lahteine
d9cb7be444
Merge pull request #8160 from thinkyhead/bf1_fixup_sd_reprint 
[1.1.x] Simplify SD_REPRINT_LAST_SELECTED_FILE
 2017-10-29 23:57:44 -05:00
Scott Lahteine
5837f067cf Tweak to QUICK_HOME comment 2017-10-29 23:50:02 -05:00
Scott Lahteine
5e5a177934 No hacks needed for SD_REPRINT_LAST_SELECTED_FILE 2017-10-29 22:44:03 -05:00
Scott Lahteine
0b5b03d9dc Tweak for soft endstops 2017-10-29 20:16:22 -05:00
Scott Lahteine
9288d80613
Merge pull request #8156 from thinkyhead/bf1_anet_10_servo 
[1.1.x] Define a default SERVO0_PIN for Anet 1.0
 2017-10-29 19:53:49 -05:00
Scott Lahteine
6698db29de
Update LCD draw condition 2017-10-29 19:17:32 -05:00
Scott Lahteine
25e86a520d
Merge pull request #8114 from thinkyhead/bf1_print_sd_file_again 
[1.1.x] Cleanup for SD Print Again
 2017-10-29 19:09:34 -05:00
Scott Lahteine
b0e282a74b Cleanups for SD_REPRINT_LAST_SELECTED_FILE 2017-10-29 19:02:17 -05:00
Scott Lahteine
46ed54cd8e Include time scale in some planner vars 2017-10-29 18:48:14 -05:00
Scott Lahteine
9c870baf84 Add a hidden 8s watchdog option for easier debugging 2017-10-29 18:34:57 -05:00
Scott Lahteine
471c2b5d5c Provide a default SERVO0_PIN for Anet 1.0 2017-10-29 18:34:57 -05:00
Scott Lahteine
e792c2b234 Followup to #8123 - to match 2.0.x changes 2017-10-29 05:39:44 -05:00
Scott Lahteine
daa85f71e1
Merge pull request #8123 from thinkyhead/bf1_dual_xyz_endstops 
[1.1.x] Dual endstops XYZ
 2017-10-29 04:36:09 -05:00
Rowan Meara
9850ba0cbd [1.1.x] Fix M303 thermal protection #8103 (#8126) 
* Fixed M303 thermal protection

The temperature sanity checking logic was not being applied during M303
(pid autotuning) because instead of setting a target temperature, it
directly manipulated the pwm values.  When PIDTEMP/PIDTEMPBED is
enabled, PWM values rather than the target temperature determine whether
the heater is on.  I changed this to look directly at the PWM amount
when pid is enabled.

* Turn off heaters on M303 error

Currently, PID autotuning stops if it overshoots the temperature by 20C
or if if the temperature does not change for 20 minutes and it times
out.  I added calls to disable the heaters in these scenarios.

* Removed unnecessary if statement.

Added changes suggested by GMagician.

* Update temperature.cpp

* Update temperature.cpp

* Update temperature.cpp
 2017-10-29 04:34:47 -05:00
Scott Lahteine
318c419f77 Implement support for Dual X and Y endstops 2017-10-29 03:49:45 -05:00
Scott Lahteine
7e1232269a Add Dual Steppers / Endstops to configs 2017-10-29 03:49:45 -05:00
Scott Lahteine
62d52d62dc Cleanup for DIGIPOTS settings 2017-10-29 03:49:32 -05:00
LVD-AC
77cf42588f (1.1.x) serious bug G33 2017-10-29 00:22:55 +02:00
Scott Lahteine
a979c428ee Revert default BABYSTEP_MULTIPLICATOR to 1 2017-10-27 19:42:51 -05:00
jmdearras
6920769a9a Added MKS GEN L board (#8088) 
[1.1.x] Add MKS GEN L board
 2017-10-27 02:13:41 -05:00
Scott Lahteine
410aa0716d Concise SD_REPRINT_LAST_SELECTED_FILE description 2017-10-27 00:10:04 -05:00
Scott Lahteine
445a7f65cd Clean up trailing whitespace 2017-10-27 00:02:35 -05:00
Luc Van Daele
e64cfb13b8 (1.1.x) auto tune calibration parameters (#8031) 
* auto tune calibration parameters

* solve warnings

* Tweaks to formatting

* review Thinkyhead

* Error
 2017-10-26 23:49:20 -05:00
Scott Lahteine
2296d98845 Tweak neopixel self-test 2017-10-26 22:46:11 -05:00
Scott Lahteine
9aac3d8773 Add some Polish translations 
Thanks @SCiunczyk
 2017-10-26 22:44:23 -05:00
Scott Lahteine
6569b9ba56 Fix FWRETRACT logic, apply common sense 2017-10-26 22:36:41 -05:00
Bob-the-Kuhn
7ab9abe4ef Merge pull request #8107 from Bob-the-Kuhn/1.1.x-reduced-font-fix 
(bug fix) 1.1.x - save 1400 bytes of FLASH by using reduced font for some languages
 2017-10-26 16:09:52 -05:00
Bob-the-Kuhn
3357170b18 give this language an unique name 2017-10-26 15:48:00 -05:00
Roxy-3D
2e746f2b8b Initial conflict resolution of SD_REPRINT_LAST_SELECTED_FILE (#8104) 
* Initial conflict resolution

All previous items resolved:
- Use of ELAPSED() on timer code
- Switch to use of defer_return_to_status=true as much as possible
- Update & Clean Up of Max7219 routines

* Resolve non-SD case in ultralcd.cpp
 2017-10-26 11:44:55 -05:00
Bob-the-Kuhn
594c075377 1.1.x - save 1400 bytes of FLASH by using reduced font for some languages (#8095) 
* use reduced sized font for some languages

* Fit Portuguese language files to existing scheme

* Rename language_pl-DOGM.h to language_pl_utf8.h

* Rename language_pl_utf8.h to language_pl-DOGM.h

* Update dogm_font_data_ISO10646_1.h

* Update dogm_font_data_ISO10646_1.h
 2017-10-25 18:32:38 -05:00
Scott Lahteine
8bb1e91afd More specific M100 description 2017-10-25 16:11:09 -05:00
Scott Lahteine
a12d1b21b5 Merge pull request #8048 from madmo/mks-mini-gt2560 
[1.1.x] Add MKS MINI 12864 support to GT2560
 2017-10-25 01:13:07 -05:00
Scott Lahteine
5bed2f351a Fix spacing, use single instances of similar pins 2017-10-24 19:12:40 -05:00
Scott Lahteine
ec9d7b639d Encourage users to re-examine their configs 2017-10-24 18:33:31 -05:00
Scott Lahteine
1c97c1582c Move UBL_SAVE_ACTIVE_ON_M500 to Configuration.h 2017-10-24 18:25:50 -05:00
Scott Lahteine
f06f4b40b8 Apply physical limits to mesh bounds 2017-10-24 16:49:00 -05:00
Scott Lahteine
3235beef6d Merge pull request #8073 from thinkyhead/bf1_fix_M600 
[1.1.x] Fix position sync in M600 pause/resume
 2017-10-24 14:56:01 -05:00
Scott Lahteine
e5ab783b08 Merge pull request #8061 from thinkyhead/bf1_general_cleanup 
[1.1.x] Patch up some verbiage in configs
 2017-10-24 14:44:31 -05:00
Scott Lahteine
355ebec92d Fix position sync in M600 pause/resume 2017-10-24 14:41:54 -05:00
montri2025
fa157f08ff lcd <20 disply Bed Temperature cast ty (#8068) 2017-10-23 23:46:26 -05:00
Scott Lahteine
39a545b3f8 Patch up some verbiage in configs 2017-10-22 17:14:50 -05:00
Roxy-3D
e9bc9a2ab4 change to better (more clear) names (#8049) 
set_destination_to_current() changed to set_destination_from_current()

set_current_to_destination() changed to set_current_from_destination()
 2017-10-21 10:58:17 -05:00
Moritz Bitsch
b22c87183f Add MKS MINI 12864 support for GT2560 2017-10-21 13:05:21 +02:00
tweichselbaumer
fa44130734 Add M290 babystepping (#8014) 
* Add M290 babystepping

* Allow `Z` for `M290`

* fix spacing

* Support BABYSTEP_XY in M290

* Not just Z

* Extend M290 for BABYSTEP_ZPROBE_OFFSET

* tweak
 2017-10-21 03:58:53 -05:00
MetalSearch
9b3f27f02a Fix:EndStops doesn't working with BOARD_RAMPS_14_EFB on Micromake C1 (#8041) 
[1.1.x] Fix EndStops don't work with BOARD_RAMPS_14_EFB on Micromake C1
 2017-10-21 00:24:22 -05:00
Scott Lahteine
a7398a0459 Prevent SDCARD_SORT_ALPHA from exploding 2017-10-20 19:14:11 -05:00
Scott Lahteine
91c5c2538a Add SCROLL_LONG_FILENAMES advanced option 
Based on #7637 by @marcio-ao
 2017-10-20 19:14:10 -05:00
Scott Lahteine
259cf1b0b2 BQ enables this in the config. Remove here 2017-10-18 23:23:56 -05:00
Scott Lahteine
2338632270 Simplify Cartesian probing bounds 
Followup to #8011
 2017-10-18 17:16:14 -05:00
Luc Van Daele
2a88a3fd33 boolval revised (#8017) 2017-10-18 14:19:01 -05:00
Thomas Moore
84470f6b2a Update UBL mesh boundaries to accomidate beds centered at 0, 0 (#8011) 2017-10-18 10:03:00 -05:00
studiodyne
e04902f589 Add EXTRA_FAN_SPEED feature 2017-10-16 02:32:30 -05:00
Scott Lahteine
d63d08ef8b Merge pull request #7948 from gallynero/patch-1 
Enable change feedrate in delta
 2017-10-15 16:28:45 -05:00
Scott Lahteine
5c2ff6ed19 Add Capability BUILD_PERCENT 2017-10-15 03:01:36 -05:00
Scott Lahteine
5f708d47ce Add LCD_SET_PROGRESS_MANUALLY 2017-10-15 02:21:09 -05:00
Scott Lahteine
3b4b9c6d68 Unaccented French for Character Display 2017-10-14 20:17:29 -05:00
MetalSearch
8df47d76c7 Add control board MAKEBOARD Mini 
+Add French language without accent for japanese LCD
 2017-10-14 20:10:03 -05:00
Scott Lahteine
be55a49946 Merge pull request #7980 from thinkyhead/bf1_granular_sw_endstops 
[1.1.x] Software endstop options by axis
 2017-10-14 17:37:35 -05:00
Scott Lahteine
e05af35678 Add MIN_SOFTWARE_ENDSTOP_[XYZ] to example configs 2017-10-14 17:14:19 -05:00
Scott Lahteine
060d16d26b Split the software endstop capability by axis. 
Based on #7975 and #7979
 2017-10-14 17:14:08 -05:00
Scott Lahteine
e17869ca20 Fix Emergency Parser 
Followup to #7459
 2017-10-14 15:58:07 -05:00
Scott Lahteine
662105c1b6 ADC sensor fix inspired by 'Evgen2' on Twitter 2017-10-14 02:39:13 -05:00
Scott Lahteine
b8ddae61e2 ubl_state no longer needed 2017-10-14 02:39:13 -05:00
Scott Lahteine
ece14af556 Improve LCD leveling value edits 2017-10-14 02:39:13 -05:00
Scott Lahteine
b07a2aa23c Add HAS_MESH conditional 2017-10-14 02:39:12 -05:00
Scott Lahteine
88857e8028 Move fade_scaling_factor_for_z to Planner 2017-10-14 02:10:46 -05:00
Scott Lahteine
8e808fcadc General cleanup, apply const 2017-10-13 16:13:36 -05:00
Scott Lahteine
da93a272a0 Move leveling_is_active to a macro 2017-10-13 16:11:27 -05:00
Scott Lahteine
3d5b10735f Remove obsolete UBL z_offset 2017-10-13 08:23:01 -05:00
gallynero
94228d4522 Enable change feedrate in delta 
Enable change the relative feedrate on a printing job in delta machines with UBL
 2017-10-12 01:55:51 +02:00
Slawomir Ciunczyk
167058b61f Different NEOPIXEL types 
Changes to support NEOPIXEL LED strips
- Support for different NEOPIXEL as defined in Adafruit_NeoPixel.h
- ability to setup startup brightness
- ability to define sequential/non-sequential transition of color change during heating-up
- additional parameter to M150 P<brightness>
 2017-10-10 01:58:40 -05:00
Scott Lahteine
f835245ee1 Merge pull request #7908 from thinkyhead/bf1_goodbye_legacy_advance 
[1.1.x] Remove legacy ADVANCE feature
 2017-10-10 00:31:39 -05:00
Scott Lahteine
38110e220d Segmented manual moves for kinematics 2017-10-09 23:10:17 -05:00
deram
9239fcf0da Allow UBL G29 and G26 to build without a probe 2017-10-09 18:37:53 -05:00
Scott Lahteine
381ebc043f Add support for ST7565-64128N 
Based on #7447 by @Bob-the-Kuhn
 2017-10-09 17:39:03 -05:00
jmdearras
c7e0a49c94 Add some new LCD displays 
- Original CR-10
- MKS Mini Display
 2017-10-09 17:39:03 -05:00
Scott Lahteine
067622fcc6 Apply some tweaks based on 2.0.x 2017-10-09 17:39:03 -05:00
Scott Lahteine
ae256576e1 Bring configs into parity with 2.0.x 2017-10-09 17:38:39 -05:00
Scott Lahteine
cbfcce09fa Remove legacy ADVANCE feature 2017-10-09 04:27:45 -05:00
Scott Lahteine
a21201a713 LCD filename already concatentated 2017-10-07 15:14:58 -05:00
Scott Lahteine
53f2f188f2 LCD filename already concatenated 2017-10-07 15:11:28 -05:00
Scott Lahteine
a6e95c7d25 Fix display issue with SD_ALPHA_SORT caching 2017-10-07 15:07:05 -05:00
Dave Johnson
97e6663bb3 [1.1.x] Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled (#7878) 
* Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled

If HOME_AFTER_DEACTIVATE, there is no need to warn on LCD since printer will home prior to starting print.  Saves 60 bytes PROGMEM.
add HD44780 too

* Reduce lines used

* Reduce lines used
 2017-10-07 15:00:56 -05:00
Scott Lahteine
e2ceb1b800 Merge pull request #7632 from GMagician/Wrong-sanitycheck-message-fix 
Addressing #7612
 2017-10-07 02:25:35 -05:00
Scott Lahteine
8c93295d62 Merge pull request #7873 from thinkyhead/bf1_anet_encoder_pulses 
[1.1.x] Fixing ANET encoder pulses
 2017-10-07 01:21:14 -05:00
Phr3d13
c26242a553 Fixing #7833 2017-10-07 00:07:24 -05:00
Scott Lahteine
dac5f20a01 Patch SD file draw bug 2017-10-06 23:53:08 -05:00
Scott Lahteine
b211fa4e1f Remove extra NEWPANEL settings in Conditionals_LCD.h 2017-10-06 17:23:32 -05:00
LVD-AC
355cba4aa7 Fixes for G33 2017-10-06 15:52:53 -05:00
Scott Lahteine
e287e14354 Tweak spacing in utf8_mapper.h 2017-10-06 15:11:27 -05:00
Scott Lahteine
5e63ba970d Merge pull request #7862 from thinkyhead/bf1_mapper_c2c3c4_sk 
[1.1.x] Added Slovak C2C3C4 mapper implementation.
 2017-10-06 14:56:26 -05:00
Roman Moravčík
2a46ab288e Added Slovak C2C3C4 mapper implementation. 2017-10-06 14:40:15 -05:00
Scott Lahteine
7999249a5c Set TEMP_SENSOR_0 to 1 in CR-10 example config 
As pointed out in #7692 by @totalitarian
 2017-10-06 14:29:00 -05:00
Scott Lahteine
0ec9a7f090 Fix xon_xoff_state initialization 2017-10-04 12:10:15 -05:00
Scott Lahteine
a47c5c093d Merge pull request #7459 from ejtagle/xon-xoff-sdxfer 
[1.1.x] XON/XOFF serial handshake (for faster transfers to SD)
 2017-10-02 23:52:41 -05:00
Scott Lahteine
bcb8722513 Fix DUAL_X_CARRIAGE manual move 
Addressing #7745
 2017-10-02 23:28:52 -05:00
Scott Lahteine
4c34b3ad9c Stop redundant E4_IS_TMC2130 current control 2017-10-02 23:10:34 -05:00
Scott Lahteine
1b8b5c4b06 Make prepare_move_to_destination_dualx a full move function 2017-10-02 23:10:18 -05:00
Scott Lahteine
4e19ff75b6 XON/XOFF corrections, tweaks, formatting, etc. 2017-10-02 03:52:42 -05:00
Scott Lahteine
94caabf89a Add XON/XOFF options to example configs 2017-10-02 03:52:41 -05:00
Scott Lahteine
f365448338 Merge pull request #7811 from thinkyhead/bf1_fix_resume_print 
[1.1.x] Fix broken M600 resume_print
 2017-10-01 22:54:34 -05:00
GMagician
8ab426c3a4 Updated all examples configurations 
Forgot to update examples configurations. Done now
 2017-10-01 21:04:12 -05:00
GMagician
33d28c24bf Implementing [FR] #7548 
Added new configuration to inhibit XYZ movements when home is not done
 2017-10-01 21:02:42 -05:00
Scott Lahteine
ac70048945 Only MarlinConfig.h ahead of feature block 2017-10-01 20:55:14 -05:00
MasterPIC
40a4a716e1 Fix filament change bug in resume_print 
Expected behaviour: while (auto)extruding the new filament, the nozzle should not move. It should move (from filament replacement position to printing position) only after the user has confirmed the successful filament replacement and extrusion.

Actual behaviour: while (auto)extruding the new filament, the nozzle moves from filament replacement position back to printing position.
So the extrusion step is mixed with the movement required to go back to the printing position.

The provided code seems to be working but probably a better fix is required.
 2017-10-01 18:42:29 -05:00
Scott Lahteine
802f147686 Remove some excess whitepsace 2017-10-01 18:25:04 -05:00
Scott Lahteine
80a0f935a1 Fix G10-G11 by adding a synchronize 
Based on #7792 by @tcm0116
 2017-09-30 17:46:31 -05:00
MasterPIC
7f8ff0a724 Show leveling status on character LCD 2017-09-27 12:18:41 -05:00
Scott Lahteine
723a34d9c7 Add confirmation to Init EEPROM command 2017-09-27 11:27:47 -05:00
Scott Lahteine
2efd5b119d Add USER_SCRIPT_RETURN option 2017-09-27 11:23:34 -05:00
Scott Lahteine
b105e47cb5 Move SERVO0 pin on GT2560 A+ with BLTOUCH enabled 
Based on #7769
 2017-09-27 10:39:44 -05:00
DecoyPlatypus
41dcbe89dd Fixed ST7920_DELAY typo 
Fixed typo where ST7920_DELAY_2 was being #defined after a check for #ifndef ST7920_DELAY_3
 2017-09-27 03:01:09 -05:00
DecoyPlatypus
70a64355f6 Fixed LCD_FOR_MELZI SanityCheck 
Sanity Check for LCD_FOR_MELZI  would fail with "Please select no more than one LCD controller option" any time #define LCD_FOR_MELZI was enabled in Configuration.h, even if there were no other LCD options enabled.
 2017-09-27 03:01:09 -05:00
Scott Lahteine
e37a1ded0d Increase BABYSTEP_MULTIPLICATOR to 100 
Ideally, it should be calculated based on Z steps per unit so that each
babystep corresponds to around 0.025mm. Smaller than this is largely
insignificant for typical layer heights.
 2017-09-27 00:14:26 -05:00
Scott Lahteine
3e28243076 No need for LCD_PINS_Dn when unused 2017-09-27 00:12:20 -05:00
Scott Lahteine
bbb94b8f68 babystepping tweak 2017-09-27 00:12:20 -05:00
Scott Lahteine
a277b43e30 Fix babystep menu display 2017-09-27 00:12:20 -05:00
Scott Lahteine
8a994fb1b1 Fix encoder pulses for G3D_PANEL 2017-09-27 00:12:20 -05:00
Scott Lahteine
ac2ac99e15 Fix bad logic in autostart 
As pointed out by @marcio-ao in #7638
 2017-09-24 17:52:35 -05:00
Scott Lahteine
c1cc79176c Full-featured Creality configs 2017-09-24 16:52:42 -05:00
Scott Lahteine
f25dccd6d1 Disable BABYSTEP_XY by default in all configs 2017-09-24 16:52:42 -05:00
Scott Lahteine
cd09a83cfa Add size note to SDSORT_LIMIT 2017-09-24 16:52:41 -05:00
Scott Lahteine
9bbc2df217 General code cleanup, spacing 2017-09-24 16:52:41 -05:00
Luc Van Daele
74d430cb97 matrix names update (#7697) 
* matrix names update

* symplified names

* new angle normalization

* ABC

* axis

* least squares

* recalc_delta_settings

* endstop_adj

* 0p

* bug
 2017-09-24 01:45:31 -05:00
Scott Lahteine
9d4d53e2fd Update links to old wiki page 2017-09-23 22:06:45 -05:00
Scott Lahteine
00896f1713 Fix LEVEL_BED_CORNERS (No leveling required) 2017-09-23 22:00:45 -05:00
Scott Lahteine
c3a9e95a5f Define drawmenu items once, in ultralcd.cpp 2017-09-23 22:00:45 -05:00
Scott Lahteine
0afd25a010 Fix caselight compile issues 2017-09-23 22:00:44 -05:00
GMagician
5b87843fae Addressing #7612 
Replaced extruder with hotend
 2017-09-07 19:07:36 +02:00
Scott Lahteine
386b74f8c2 Merge pull request #7593 from marcio-ao/bugfix-1.1.x 
Added option for graphical overlay for Z-offset (Resubmission of #7350 and #7586)
 2017-09-02 00:01:38 -05:00
Tannoo
2a963fb5d1 UBL LCD Bugfixes (#7598) 2017-09-01 16:59:06 -05:00
Marcio Teixeira
d69c5317df Added option for graphical overlay for Z-offset 2017-08-31 14:21:39 -06:00
Scott Lahteine
367e1b54ba Merge pull request #7591 from thinkyhead/bf1_misc_patches 
M111: no args reports current flags
 2017-08-31 15:19:29 -05:00
Scott Lahteine
8a184a526a Marlin: Patch G33, allow M111 to give status 2017-08-31 14:35:00 -05:00
Scott Lahteine
353c23b16e Enforce BED_CENTER_AT_0_0 on Delta, SCARA 2017-08-31 14:34:59 -05:00
Scott Lahteine
898f48e331 CNC workspace planes for G5 
According to LinuxCNC, G5 should throw an error if the current plane mode isn't XY.
 2017-08-31 14:29:29 -05:00
Scott Lahteine
5851c2d36f MAX7219 followup (#7564) 
* Add MAX7219_DEBUG to Travis CI testing

* Tweak config and use standard pin naming for MAX7219_DEBUG

* MAX7219: Apply coding standards, use macros, etc.

* Make code work...
 2017-08-31 11:44:43 -05:00
Scott Lahteine
52073f21c5 Merge pull request #7556 from thinkyhead/bf1_slovak_language 
Slovak UTF-8 translation
 2017-08-27 21:05:53 -05:00
Scott Lahteine
321f98f867 Fix servo delay in Folgertech config 2017-08-27 20:53:27 -05:00
jneilliii
36771e9492 Fixes required for Creality CR-10 2017-08-27 20:39:16 -05:00
Roxy-3D
3f0b38ed5d Add Max7219 LED Matrix Debug Support (#7563) 
* Add Max7219 LED Matrix Debug Support

The Max7219 8x8 LED Matrix's are very helpful for debugging new code.
And for that matter, just trying to maximize printer settings without
causing stuttering.

The displays are very inexpensive (under $2.00 with shipping) and
provide a lot of help when trying to debug complicated code.

* Try to keep Makefile up to date.
 2017-08-25 17:03:07 -05:00
GMagician
0067bb2840 Addressing #7552 
When M405 is used it changes 'volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]' value. When M406 disables M405 it leaves the value unchanged.
This PR applies 'calculate_volumetric_multipliers' in M406 instead of resetting it to 1.0 because M200 may not be compatible with M405 hence I'm sure to restore anyway with correct value.
 2017-08-25 03:23:16 -05:00
Scott Lahteine
2b12093589 Merge pull request #7532 from thinkyhead/bf1_fan_mux_vben 
New feature: Part-Cooling Fan Multiplexer
 2017-08-25 03:16:40 -05:00
Michal Holes
54d48130f3 Slovak UTF-8 translation 
Slovak UTF-8 translation
 2017-08-23 19:14:35 -05:00
Scott Lahteine
86c024ce98 Organize, document pins.h include lines 2017-08-23 18:33:00 -05:00
Scott Lahteine
c7b07d20f2 Minor patches to pins files 2017-08-23 18:32:59 -05:00
Scott Lahteine
356af7dcb0 Tweak Sanguinololu-related pins files 2017-08-23 18:32:59 -05:00
Scott Lahteine
11a724d8fc Sanguinololu example configuration 2017-08-23 18:32:59 -05:00
Scott Lahteine
e337df2e98 Miscellaneous tweaks to serial outputs, code cleanups 2017-08-23 18:32:58 -05:00
Vben
c0409b85e7 New feature: Part-Cooling Fan Multiplexer 2017-08-18 15:59:04 -05:00
Scott Lahteine
e82e9073d6 Merge pull request #7530 from GMagician/Code-reduction 
Code reduction with some configurations
 2017-08-18 13:57:59 -05:00
GMagician
6127154af3 Fix identation by tab 
There was a tab instead of spaces
 2017-08-18 11:34:55 +02:00
GMagician
b94a1c6b9f Code reduction this some configurations 
When switching noozle and extruder but these operations are done by the same servo in 'setup' function there is a unnecessary call
 2017-08-18 11:11:00 +02:00
GMagician
405a2132f3 #7529 compile fix 
I made an error in previous fix
 2017-08-17 22:04:28 +02:00
GMagician
869d7f3703 #7504 missing part 
#7504 integration has missed this part.
When more than 1 servo is used with bltouch it's impossible to predefine default servo delay for it.
In my original fix I completely removed this part but maybe this is a better compromise
 2017-08-17 21:43:47 +02:00
Scott Lahteine
101ba70517 Merge pull request #7505 from thinkyhead/bf1_anet_1_pio 
Add Anet 1.0 to Platformio.ini
 2017-08-17 00:33:20 -05:00
Vben
4817b39d98 Added new feature for AutoParking Extruder (APE) 2017-08-16 17:33:11 -05:00
Scott Lahteine
6772e33ef6 Use [XY]_CENTER for error correction 
Followup to #7512
 2017-08-16 16:13:09 -05:00
Scott Lahteine
385f1bb9e5 Merge pull request #7504 from thinkyhead/bf1_servo_delays 
Individual servo delays
 2017-08-16 16:05:22 -05:00
Scott Lahteine
2a31c9f2ce Merge pull request #7515 from cdedwards/bugfix-1.1.x 
Fix for G26 spam output
 2017-08-16 16:01:10 -05:00
MTrab
5fa61c0ad3 Add Anet 1.0 to Platformio.ini 
Added env:anet10 to platformio.ini for easy compile and upload to this board
 2017-08-16 15:59:20 -05:00
Scott Lahteine
b3f59ec945 Merge pull request #7519 from thinkyhead/bf1_cleanups_aug_16 
Add "Level Corners" menu item
 2017-08-16 15:58:15 -05:00
Tannoo
b33739d493 UBL_Language_Update (#7520) 
* UBL_Language_Update

Translatable strings

* Use slightly better wording...

* Use slightly better wording...
 2017-08-16 09:49:04 -05:00
Scott Lahteine
a1878cd1c0 Add "Level Corners" menu option 2017-08-16 02:54:33 -05:00
Scott Lahteine
0a18fb735e Use "PSU" label to fit on screen 2017-08-16 02:51:00 -05:00
Scott Lahteine
30887feae3 Tweak some formatting in ABL G29 2017-08-16 02:51:00 -05:00
Thomas Moore
257b693ab0 Advanced pause fixes (#7518) 
* Disallow filament change while paused

* Use kinematic movemements in pause_print and resume_print
 2017-08-15 22:57:13 -05:00
Tannoo
ab2ac1af71 UBL_LCD_storage_corrections (#7517) 
Correcting the storage selection.
Also EEPROM error handling on the LCD.
 2017-08-15 21:01:11 -05:00
cdedwards
f1843211e6 Fix for G26 spam output 
while heating, G26 will continuously spam the heater states instead of printing it out every 5000ms.
 2017-08-15 17:04:53 -06:00
Roxy-3D
be5ca34215 Allow G29 to work correctly even if nozzle is off the mesh. (#7512) 
* work around previous regressions...
 2017-08-15 17:04:52 -05:00
Scott Lahteine
06541ec885 Merge pull request #7448 from thinkyhead/bf1_delta_fixes 
Prevent damage if DELTA_HEIGHT is set badly
 2017-08-15 16:35:09 -05:00
GMagician
e9c72978c7 Implement SERVO_DELAY as array 
This modify give SERVO_DELAY x servo basis
 2017-08-15 00:28:47 -05:00
Scott Lahteine
96ae53cf41 Use MOVE_SERVO macro where possible 2017-08-15 00:28:39 -05:00
Scott Lahteine
3be9c19f12 Hold on move axis screens 2017-08-14 22:51:47 -05:00
Scott Lahteine
8fd58cd6dc Patch goto labels for consistency 2017-08-14 22:51:47 -05:00
Scott Lahteine
75e6f72c89 Fix hexadecimal number formatting 2017-08-14 22:50:44 -05:00
Scott Lahteine
ac76101ec3 Eliminate goto in gcode_M48 2017-08-11 17:00:40 -05:00
Scott Lahteine
75e6ead5fd Eliminate goto in gcode_G33 2017-08-11 17:00:40 -05:00
Scott Lahteine
6bd63d27b5 Updates to G29 for probe error handling 2017-08-11 17:00:40 -05:00
Thomas Moore
f54e0fc90f Prevent damage if DELTA_HEIGHT is incorrect 2017-08-11 16:09:14 -05:00
Scott Lahteine
0938c62b48 Neater position_is_reachable call 2017-08-11 15:55:32 -05:00
Scott Lahteine
9d95b1b4df Tweak Conditionals_post.h 2017-08-11 15:55:32 -05:00
Scott Lahteine
35d5a7bdff Tweak CR-10 config/pins 2017-08-11 15:55:31 -05:00