Commit Graph

1064 Commits

Author SHA1 Message Date
Scott Lahteine
ba8d03d241 Clean up some endstop inverting examples 2018-04-28 08:00:44 -05:00
Scott Lahteine
37927f9274 Fix some endstop inverting settings 2018-04-28 08:00:15 -05:00
Scott Lahteine
6b50a50676
Extra options for LEVEL_BED_CORNERS (#10484) 2018-04-22 02:30:20 -05:00
Scott Lahteine
7e585cab83 Add POWER_LOSS_RECOVERY to example configs 2018-04-21 19:13:30 -05:00
Festivejelly
61f9e28c23 [1.1.x] Wait for bed heaters between probing (#9890) 2018-04-21 15:44:07 -05:00
Scott Lahteine
51aa9743a6 Rename MKS_13 to MKS_GEN_13 2018-04-18 22:16:16 -05:00
Scott Lahteine
f1dfc80332 Improved SENSORLESS_HOMING sanity check 2018-04-17 04:10:57 -05:00
Scott Lahteine
090d72f591
[1.1.x] Add optional menu item to toggle software endstops (#10392) 2018-04-13 00:24:20 -05:00
Luc Van Daele
6e30d1bef1 [1.1.x] G33 MIN_STEPS_PER_SEGMENT (#10385) 2018-04-12 20:19:42 -05:00
Luc Van Daele
21971f2f7a Overhaul of G33 Delta Calibration (#8821) 2018-04-11 19:12:56 -05:00
Scott Lahteine
336131fb37 Trailing whitespace 2018-04-11 00:27:43 -05:00
Scott Lahteine
e87ae5b643 Add Z_PROBE_LOW_POINT to example configs 2018-04-09 01:56:57 -05:00
Scott Lahteine
157d28c418 Rename, arrange advanced pause purge options 2018-04-09 01:14:07 -05:00
Roxy-3D
816fa9e2b4 More accurate number for Z_PROBE_OFFSET_FROM_EXTRUDER 2018-04-08 22:25:11 -05:00
Scott Lahteine
56b5fb5e15 Update Bed PID config comments 2018-04-08 06:46:05 -05:00
Scott Lahteine
b637b80a9a
Merge pull request #10177 from thinkyhead/bf1_filament_load_accel
[1.1.x] Filament load/unload add acceleration for Bowden
2018-04-08 03:28:45 -05:00
Scott Lahteine
6ec2cbce18 Bring RepRapPro Huxley config up to date
Followup to #10343
2018-04-08 00:31:18 -05:00
indazoo
f6bf247302 Add RepRapPro Huxley configuration (#10343) 2018-04-08 00:19:40 -05:00
Scott Lahteine
be0afd71df Add ADVANCED_PAUSE_FEATURE ACCEL options to example configs 2018-04-07 23:14:40 -05:00
Scott Lahteine
08b09f7a4c Add Chamber Temp options to example configs 2018-04-06 23:09:43 -05:00
Scott Lahteine
c46d47f45f Scale feedrate (mm/s to deg/s) for SCARA 2018-04-05 16:17:23 -05:00
Scott Lahteine
05fc3d7891 Add ADVANCED_PAUSE_CONTINUOUS_PURGE to example configs 2018-04-04 20:53:00 -05:00
Pavel Peganov
de5f69b285 Add Creality CR-8 configuration (#10285) 2018-04-02 19:58:02 -05:00
Scott Lahteine
be098cd42f Z Endstop Servo => Z Probe Servo 2018-04-01 23:54:47 -05:00
Thomas Karl Pietrowski
bfdd14be4f bq Hephestos2: Allow bed leveling (#10234)
* Increases the offset, needed to allow the nozzle to touch the bed
* By default uses an offset of -4. This one is minimally far way from the buildplate and therefore only fine-tuning is needed to set the correct distance.
2018-03-27 22:06:14 -04:00
Scott Lahteine
68b9503b96 MIN_PROBE_EDGE replaces DELTA_PROBEABLE_RADIUS 2018-03-19 02:17:45 -05:00
Scott Lahteine
cf4e2e507f Consolidate 3-point leveling point options 2018-03-19 01:55:51 -05:00
Scott Lahteine
f7de05e50c General spacing cleanup 2018-03-17 16:51:34 -05:00
shaktee
c2ba9a03ee BIBO2 default update and Cyclops config (#10107) 2018-03-15 00:17:04 -05:00
Scott Lahteine
5c81ce2bb8
When STATUS_EXPIRE_SECONDS is 0, hide the position. (#10100)
Some users may prefer to hide the position updates on the `LIGHTWEIGHT_UI` altogether. This leads to an even less cluttered display (it also saves on SPI traffic and one byte of RAM).
2018-03-14 02:44:41 -05:00
Scott Lahteine
738a8495ad Improve TMC config organization, naming 2018-03-13 21:43:43 -05:00
Scott Lahteine
e63cb5fe8f
[1.1.x] Make MIN_PROBE_EDGE a general option (for electronic probes) (#10068)
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
2018-03-13 01:15:29 -05:00
Scott Lahteine
33b18dc801 Add Z_AFTER_PROBING to example configs 2018-03-11 09:48:03 -05:00
Scott Lahteine
cce80fd41c Add UNKNOWN_Z_NO_RAISE to example configs 2018-03-09 23:11:35 -06:00
Scott Lahteine
a9392c6b27 Set a safe default MINIMUM_STEPPER_PULSE of 2 2018-03-09 03:59:18 -06:00
Scott Lahteine
2d0d5eccd8 Move AUTO_REPORT_SD_STATUS to SDSUPPORT block 2018-03-07 01:58:31 -06:00
Scott Lahteine
dc733192be Add AUTO_REPORT_SD_STATUS to example configs 2018-03-07 00:06:17 -06:00
Scott Lahteine
081ab35e82 Remove some trailing whitespace 2018-03-04 21:13:36 -06:00
Scott Lahteine
3cdd2591ed Update custom boot screen description 2018-03-03 20:10:35 -06:00
Scott Lahteine
a6326d25fb Drop SCARA_FEEDRATE_SCALING
The updated planner takes the length of the move, so this pre-calculation is no longer needed.
2018-03-01 04:28:42 -06:00
Scott Lahteine
114e9b0f56 Fix CR-10 status screen missing commas
Fix #9660
2018-02-26 15:50:04 -06:00
Scott Lahteine
c1a1f80fff Standardize encoder buzz defaults 2018-02-24 22:55:46 -06:00
Scott Lahteine
8488d64062 Standardize encoder defaults 2018-02-24 22:37:55 -06:00
Scott Lahteine
7dab8ca5dc Add Creality Ender-4 configurations 2018-02-24 22:01:16 -06:00
Scott Lahteine
d0c8aabd28 Move Creality Ender-2 configurations 2018-02-24 22:01:11 -06:00
Scott Lahteine
8c22f9fd4f Bring some example configs up to speed 2018-02-24 22:00:15 -06:00
Roxy-3D
9e3025e07b
Change Folger Tech i3-2020 defaults... 2018-02-24 10:28:08 -06:00
Scott Lahteine
5299b577d1
Spanish (UTF8) Language (#9785)
From #7314 by @MrAmericanMike
2018-02-23 20:23:35 -06:00
Scott Lahteine
6845f17fb2 Prettify LCD_PROGRESS_BAR options 2018-02-23 19:13:03 -06:00
Scott Lahteine
03da273ea6 Fix LCD_PROGRESS bar
Fix #9208
2018-02-23 13:59:55 -06:00