MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
8,746 Commits 1 Branch 0 Tags 96 MiB
d38aaa0c7e
Commit Graph

7218 Commits

Author SHA1 Message Date
GMagician
33d28c24bf Implementing [FR] #7548 
Added new configuration to inhibit XYZ movements when home is not done
 2017-10-01 21:02:42 -05:00
Scott Lahteine
ac70048945 Only MarlinConfig.h ahead of feature block 2017-10-01 20:55:14 -05:00
MasterPIC
40a4a716e1 Fix filament change bug in resume_print 
Expected behaviour: while (auto)extruding the new filament, the nozzle should not move. It should move (from filament replacement position to printing position) only after the user has confirmed the successful filament replacement and extrusion.

Actual behaviour: while (auto)extruding the new filament, the nozzle moves from filament replacement position back to printing position.
So the extrusion step is mixed with the movement required to go back to the printing position.

The provided code seems to be working but probably a better fix is required.
 2017-10-01 18:42:29 -05:00
Scott Lahteine
802f147686 Remove some excess whitepsace 2017-10-01 18:25:04 -05:00
Scott Lahteine
80a0f935a1 Fix G10-G11 by adding a synchronize 
Based on #7792 by @tcm0116
 2017-09-30 17:46:31 -05:00
MasterPIC
7f8ff0a724 Show leveling status on character LCD 2017-09-27 12:18:41 -05:00
Scott Lahteine
723a34d9c7 Add confirmation to Init EEPROM command 2017-09-27 11:27:47 -05:00
Scott Lahteine
2efd5b119d Add USER_SCRIPT_RETURN option 2017-09-27 11:23:34 -05:00
Scott Lahteine
b105e47cb5 Move SERVO0 pin on GT2560 A+ with BLTOUCH enabled 
Based on #7769
 2017-09-27 10:39:44 -05:00
DecoyPlatypus
41dcbe89dd Fixed ST7920_DELAY typo 
Fixed typo where ST7920_DELAY_2 was being #defined after a check for #ifndef ST7920_DELAY_3
 2017-09-27 03:01:09 -05:00
DecoyPlatypus
70a64355f6 Fixed LCD_FOR_MELZI SanityCheck 
Sanity Check for LCD_FOR_MELZI  would fail with "Please select no more than one LCD controller option" any time #define LCD_FOR_MELZI was enabled in Configuration.h, even if there were no other LCD options enabled.
 2017-09-27 03:01:09 -05:00
Scott Lahteine
e37a1ded0d Increase BABYSTEP_MULTIPLICATOR to 100 
Ideally, it should be calculated based on Z steps per unit so that each
babystep corresponds to around 0.025mm. Smaller than this is largely
insignificant for typical layer heights.
 2017-09-27 00:14:26 -05:00
Scott Lahteine
3e28243076 No need for LCD_PINS_Dn when unused 2017-09-27 00:12:20 -05:00
Scott Lahteine
bbb94b8f68 babystepping tweak 2017-09-27 00:12:20 -05:00
Scott Lahteine
a277b43e30 Fix babystep menu display 2017-09-27 00:12:20 -05:00
Scott Lahteine
8a994fb1b1 Fix encoder pulses for G3D_PANEL 2017-09-27 00:12:20 -05:00
Scott Lahteine
ac2ac99e15 Fix bad logic in autostart 
As pointed out by @marcio-ao in #7638
 2017-09-24 17:52:35 -05:00
Scott Lahteine
c1cc79176c Full-featured Creality configs 2017-09-24 16:52:42 -05:00
Scott Lahteine
f25dccd6d1 Disable BABYSTEP_XY by default in all configs 2017-09-24 16:52:42 -05:00
Scott Lahteine
cd09a83cfa Add size note to SDSORT_LIMIT 2017-09-24 16:52:41 -05:00
Scott Lahteine
9bbc2df217 General code cleanup, spacing 2017-09-24 16:52:41 -05:00
Luc Van Daele
74d430cb97 matrix names update (#7697) 
* matrix names update

* symplified names

* new angle normalization

* ABC

* axis

* least squares

* recalc_delta_settings

* endstop_adj

* 0p

* bug
 2017-09-24 01:45:31 -05:00
Scott Lahteine
9d4d53e2fd Update links to old wiki page 2017-09-23 22:06:45 -05:00
Scott Lahteine
00896f1713 Fix LEVEL_BED_CORNERS (No leveling required) 2017-09-23 22:00:45 -05:00
Scott Lahteine
c3a9e95a5f Define drawmenu items once, in ultralcd.cpp 2017-09-23 22:00:45 -05:00
Scott Lahteine
0afd25a010 Fix caselight compile issues 2017-09-23 22:00:44 -05:00
GMagician
5b87843fae Addressing #7612 
Replaced extruder with hotend
 2017-09-07 19:07:36 +02:00
Scott Lahteine
386b74f8c2 Merge pull request #7593 from marcio-ao/bugfix-1.1.x 
Added option for graphical overlay for Z-offset (Resubmission of #7350 and #7586)
 2017-09-02 00:01:38 -05:00
Tannoo
2a963fb5d1 UBL LCD Bugfixes (#7598) 2017-09-01 16:59:06 -05:00
Marcio Teixeira
d69c5317df Added option for graphical overlay for Z-offset 2017-08-31 14:21:39 -06:00
Scott Lahteine
367e1b54ba Merge pull request #7591 from thinkyhead/bf1_misc_patches 
M111: no args reports current flags
 2017-08-31 15:19:29 -05:00
Scott Lahteine
8a184a526a Marlin: Patch G33, allow M111 to give status 2017-08-31 14:35:00 -05:00
Scott Lahteine
353c23b16e Enforce BED_CENTER_AT_0_0 on Delta, SCARA 2017-08-31 14:34:59 -05:00
Scott Lahteine
898f48e331 CNC workspace planes for G5 
According to LinuxCNC, G5 should throw an error if the current plane mode isn't XY.
 2017-08-31 14:29:29 -05:00
Scott Lahteine
5851c2d36f MAX7219 followup (#7564) 
* Add MAX7219_DEBUG to Travis CI testing

* Tweak config and use standard pin naming for MAX7219_DEBUG

* MAX7219: Apply coding standards, use macros, etc.

* Make code work...
 2017-08-31 11:44:43 -05:00
Scott Lahteine
52073f21c5 Merge pull request #7556 from thinkyhead/bf1_slovak_language 
Slovak UTF-8 translation
 2017-08-27 21:05:53 -05:00
Scott Lahteine
321f98f867 Fix servo delay in Folgertech config 2017-08-27 20:53:27 -05:00
jneilliii
36771e9492 Fixes required for Creality CR-10 2017-08-27 20:39:16 -05:00
Roxy-3D
3f0b38ed5d Add Max7219 LED Matrix Debug Support (#7563) 
* Add Max7219 LED Matrix Debug Support

The Max7219 8x8 LED Matrix's are very helpful for debugging new code.
And for that matter, just trying to maximize printer settings without
causing stuttering.

The displays are very inexpensive (under $2.00 with shipping) and
provide a lot of help when trying to debug complicated code.

* Try to keep Makefile up to date.
 2017-08-25 17:03:07 -05:00
GMagician
0067bb2840 Addressing #7552 
When M405 is used it changes 'volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]' value. When M406 disables M405 it leaves the value unchanged.
This PR applies 'calculate_volumetric_multipliers' in M406 instead of resetting it to 1.0 because M200 may not be compatible with M405 hence I'm sure to restore anyway with correct value.
 2017-08-25 03:23:16 -05:00
Scott Lahteine
2b12093589 Merge pull request #7532 from thinkyhead/bf1_fan_mux_vben 
New feature: Part-Cooling Fan Multiplexer
 2017-08-25 03:16:40 -05:00
Michal Holes
54d48130f3 Slovak UTF-8 translation 
Slovak UTF-8 translation
 2017-08-23 19:14:35 -05:00
Scott Lahteine
86c024ce98 Organize, document pins.h include lines 2017-08-23 18:33:00 -05:00
Scott Lahteine
c7b07d20f2 Minor patches to pins files 2017-08-23 18:32:59 -05:00
Scott Lahteine
356af7dcb0 Tweak Sanguinololu-related pins files 2017-08-23 18:32:59 -05:00
Scott Lahteine
11a724d8fc Sanguinololu example configuration 2017-08-23 18:32:59 -05:00
Scott Lahteine
e337df2e98 Miscellaneous tweaks to serial outputs, code cleanups 2017-08-23 18:32:58 -05:00
Vben
c0409b85e7 New feature: Part-Cooling Fan Multiplexer 2017-08-18 15:59:04 -05:00
Scott Lahteine
e82e9073d6 Merge pull request #7530 from GMagician/Code-reduction 
Code reduction with some configurations
 2017-08-18 13:57:59 -05:00
GMagician
6127154af3 Fix identation by tab 
There was a tab instead of spaces
 2017-08-18 11:34:55 +02:00
GMagician
b94a1c6b9f Code reduction this some configurations 
When switching noozle and extruder but these operations are done by the same servo in 'setup' function there is a unnecessary call
 2017-08-18 11:11:00 +02:00
GMagician
405a2132f3 #7529 compile fix 
I made an error in previous fix
 2017-08-17 22:04:28 +02:00
GMagician
869d7f3703 #7504 missing part 
#7504 integration has missed this part.
When more than 1 servo is used with bltouch it's impossible to predefine default servo delay for it.
In my original fix I completely removed this part but maybe this is a better compromise
 2017-08-17 21:43:47 +02:00
Scott Lahteine
101ba70517 Merge pull request #7505 from thinkyhead/bf1_anet_1_pio 
Add Anet 1.0 to Platformio.ini
 2017-08-17 00:33:20 -05:00
Vben
4817b39d98 Added new feature for AutoParking Extruder (APE) 2017-08-16 17:33:11 -05:00
Scott Lahteine
6772e33ef6 Use [XY]_CENTER for error correction 
Followup to #7512
 2017-08-16 16:13:09 -05:00
Scott Lahteine
385f1bb9e5 Merge pull request #7504 from thinkyhead/bf1_servo_delays 
Individual servo delays
 2017-08-16 16:05:22 -05:00
Scott Lahteine
2a31c9f2ce Merge pull request #7515 from cdedwards/bugfix-1.1.x 
Fix for G26 spam output
 2017-08-16 16:01:10 -05:00
MTrab
5fa61c0ad3 Add Anet 1.0 to Platformio.ini 
Added env:anet10 to platformio.ini for easy compile and upload to this board
 2017-08-16 15:59:20 -05:00
Scott Lahteine
b3f59ec945 Merge pull request #7519 from thinkyhead/bf1_cleanups_aug_16 
Add "Level Corners" menu item
 2017-08-16 15:58:15 -05:00
Tannoo
b33739d493 UBL_Language_Update (#7520) 
* UBL_Language_Update

Translatable strings

* Use slightly better wording...

* Use slightly better wording...
 2017-08-16 09:49:04 -05:00
Scott Lahteine
a1878cd1c0 Add "Level Corners" menu option 2017-08-16 02:54:33 -05:00
Scott Lahteine
0a18fb735e Use "PSU" label to fit on screen 2017-08-16 02:51:00 -05:00
Scott Lahteine
30887feae3 Tweak some formatting in ABL G29 2017-08-16 02:51:00 -05:00
Thomas Moore
257b693ab0 Advanced pause fixes (#7518) 
* Disallow filament change while paused

* Use kinematic movemements in pause_print and resume_print
 2017-08-15 22:57:13 -05:00
Tannoo
ab2ac1af71 UBL_LCD_storage_corrections (#7517) 
Correcting the storage selection.
Also EEPROM error handling on the LCD.
 2017-08-15 21:01:11 -05:00
cdedwards
f1843211e6 Fix for G26 spam output 
while heating, G26 will continuously spam the heater states instead of printing it out every 5000ms.
 2017-08-15 17:04:53 -06:00
Roxy-3D
be5ca34215 Allow G29 to work correctly even if nozzle is off the mesh. (#7512) 
* work around previous regressions...
 2017-08-15 17:04:52 -05:00
Scott Lahteine
06541ec885 Merge pull request #7448 from thinkyhead/bf1_delta_fixes 
Prevent damage if DELTA_HEIGHT is set badly
 2017-08-15 16:35:09 -05:00
GMagician
e9c72978c7 Implement SERVO_DELAY as array 
This modify give SERVO_DELAY x servo basis
 2017-08-15 00:28:47 -05:00
Scott Lahteine
96ae53cf41 Use MOVE_SERVO macro where possible 2017-08-15 00:28:39 -05:00
Scott Lahteine
3be9c19f12 Hold on move axis screens 2017-08-14 22:51:47 -05:00
Scott Lahteine
8fd58cd6dc Patch goto labels for consistency 2017-08-14 22:51:47 -05:00
Scott Lahteine
75e6f72c89 Fix hexadecimal number formatting 2017-08-14 22:50:44 -05:00
Scott Lahteine
ac76101ec3 Eliminate goto in gcode_M48 2017-08-11 17:00:40 -05:00
Scott Lahteine
75e6ead5fd Eliminate goto in gcode_G33 2017-08-11 17:00:40 -05:00
Scott Lahteine
6bd63d27b5 Updates to G29 for probe error handling 2017-08-11 17:00:40 -05:00
Thomas Moore
f54e0fc90f Prevent damage if DELTA_HEIGHT is incorrect 2017-08-11 16:09:14 -05:00
Scott Lahteine
0938c62b48 Neater position_is_reachable call 2017-08-11 15:55:32 -05:00
Scott Lahteine
9d95b1b4df Tweak Conditionals_post.h 2017-08-11 15:55:32 -05:00
Scott Lahteine
35d5a7bdff Tweak CR-10 config/pins 2017-08-11 15:55:31 -05:00
Scott Lahteine
419c8969a7 Merge pull request #7479 from thinkyhead/bf1_fix_italian 
Fix Italian string length
 2017-08-10 18:42:35 -05:00
Frederik Kemner
25a11cd485 Use bed size and inset instead of travel limits to define mesh area\n\nAs proposed in #7435 (#7480) 2017-08-10 16:53:04 -05:00
Scott Lahteine
7f3406d47b Fix Italian string length 
Addressing #7264
 2017-08-10 15:41:35 -05:00
etagle
2864ef8c7f Slight improvement to the line parsing logic, saving 8 cycles per character 2017-08-08 02:57:55 -03:00
etagle
534bbb81ff Adding XON/XOFF and STATISTICS implementation 2017-08-08 02:46:37 -03:00
etagle
3e5485de92 Enforcing requirements so XON/XOFF software handshake works and no drops of data are experienced while transferring data to an SD Card. I tested this with a CH340 USB to serial adapter (quite typical) at baudrates as high as 1000000 on a Atmega2560 running at 16Mhz, with no problems at all. We need a 1024 byte RX buffer. Less than that and we will have drops, higher than that is not needed 2017-08-08 02:30:04 -03:00
etagle
9e147e9ac4 Adding XON/XOFF and STATISTICS configuration settings and proper documentation on their usage for serial port 2017-08-08 02:22:33 -03:00
etagle
8ab2e420f6 Adding separate RX_BUFFER_SIZE configuration setting and proper documentation on its usage 2017-08-08 02:18:42 -03:00
etagle
b4c53af07d Adding a new macro to be able to determine if a given integer value is a power of 2 2017-08-08 02:09:50 -03:00
Jozsef Kiraly
97c21e9007 Support for Geeetech GT2560 Rev.A/Rev.A+ 2017-08-06 00:42:54 -05:00
Scott Lahteine
b2822a59f9 Add a sanity check for valid bed size 2017-08-05 03:49:04 -05:00
Scott Lahteine
a7e5c1bf19 Use float to init TMC2133 steps-per-mm 2017-08-05 03:48:52 -05:00
Scott Lahteine
dd66d21749 Extend DEACTIVATE_SERVOS_AFTER_MOVE sanity-check 
As proposed in #7429
 2017-08-05 03:48:52 -05:00
richarddeweerd
b370906031 Example config for Geeetech I3 Pro X with GT2560 controller 2017-08-05 03:48:52 -05:00
Scott Lahteine
804818b4d9 Bring configs up to date 2017-08-05 03:48:52 -05:00
Scott Lahteine
dd841a3675 Merge pull request #7410 from benlye/user-script-feedback 
Make audible user script feedback optional
 2017-08-05 02:59:56 -05:00
Florian Heilmann
0fd2923a9f Fix compilation with ADVANCED_PAUSE_FEATURE without SDSUPPORT (#7412) 
* Fix compilation of ADVANCED_PAUSE_FEATURE without SDSUPPORT

* Fix Identation

* Make use of IS_SD_PRINTING macro

as per @MagoKimbra
 2017-08-05 02:58:38 -05:00
benlye
24af9e1bf4 Make audible user script feedback optional 
Add a parameter to enable/disable audible user script feedback
 2017-08-04 17:24:10 +01:00
Florian Heilmann
6827a162bb Update language_de.h 
Add
MSG_BLTOUCH                    
MSG_DELTA_SETTINGS            
MSG_UBL_MESH_EDIT                
MSG_UBL_OUTPUT_MAP_BACKUP        
MSG_UBL_STEP_BY_STEP_MENU       
MSG_Z_FADE_HEIGHT
 2017-08-04 09:35:21 +02:00
Scott Lahteine
3497153cf1 Followup cleanup patch 
Fix regression in #7428
 2017-08-03 14:55:22 -05:00
Scott Lahteine
16f8c4865a Merge pull request #7409 from FHeilmann/bf_update_ru_translation 
Update Russian Translation
 2017-08-03 14:54:40 -05:00
Scott Lahteine
622048ffb0 Clean up whitespace, trailing space, bad tab conversion, etc. 2017-08-03 11:20:03 -05:00
Roxy-3D
2cbdc0ebb6 Fix large Z corrections when nozzle moves off of UBL mesh (#7415) 2017-08-02 16:51:04 -05:00
Florian Heilmann
650e5274c4 Update Russian Translation 2017-08-02 21:19:15 +02:00
Scott Lahteine
ce65c13a97 Merge pull request #7398 from fiveangle/bf_lcd_bed_level_requirements 
Clarify LCD_BED_LEVELING requirements
 2017-08-01 17:46:07 -05:00
Dave Johnson
936dfb965c Clarify LCD_BED_LEVELING requirements 
LCD_BED_LEVELING requires PROBE_MANUALLY with auto bed leveling enabled.  See #7396
 2017-08-01 14:13:54 -07:00
Kai
ffe3013bb5 Fix for #7395 
Filament change causes freeze during paused print. This PR disables Filament change in the prepare menu when a print from SD Card is paused. See #7395
 2017-08-01 21:45:41 +02:00
Øystein Krog
e948f77cf9 Fix DUAL_X_CARRIAGE not moving at all 
Axis would only move when homing.
Bug introduced in 91841d75c9.
Fixes #6956, fixes #7050 and fixes #7291
 2017-07-31 18:44:26 +02:00
Scott Lahteine
08b0456d91 Merge pull request #7379 from thinkyhead/bf_manual_bed_level_floor 
Manual Bed Leveling: Goto previous Z height at each probe point
 2017-07-30 05:41:12 -05:00
teemuatlut
936d00dda8 Implement probing delay for piezo sensors 2017-07-29 21:46:40 -05:00
Scott Lahteine
29eef360d0 Merge pull request #7308 from thinkyhead/bf_cleanup_config_adv 
Fixes for FWRETRACT
 2017-07-29 21:20:19 -05:00
Wilfried Chauveau
894608f8a3 Manual Bed Leveling: Goto previous Z height at each probe point 2017-07-29 21:15:37 -05:00
Scott Lahteine
ff06e1a030 Merge pull request #7372 from tcm0116/delta_calib_menu 
Move Delta Calibration menu to the Prepare menu
 2017-07-29 21:05:03 -05:00
Thomas Moore
15e009b6ca Move Delta Calibration menu to the Prepare menu 2017-07-28 08:33:18 -05:00
Scott Lahteine
bfd396c13a Patch to fix some compiler warnings 2017-07-28 02:27:16 -05:00
Scott Lahteine
48c5f3dddf Tweak kill action #ifdef 2017-07-27 23:42:01 -05:00
Scott Lahteine
be7a9a07c5 Don't reset grid with G29 Q + PROBE_MANUALLY 2017-07-27 22:47:43 -05:00
Scott Lahteine
dfe670247d Merge pull request #7363 from marcio-ao/bugfix-1.1.x 
Makefile fixes and U8G support.
 2017-07-27 21:31:56 -05:00
Marcio Teixeira
af83c512b8 Added support for U8G. 2017-07-27 07:49:25 -06:00
Scott Lahteine
4eff18854b Rename options with swap_ prefix 2017-07-27 04:14:29 -05:00
Scott Lahteine
14482d2f2a Strip auto-retract for impossible M(IN|AX)_AUTORETRACT combo 2017-07-27 04:14:29 -05:00
Scott Lahteine
9fc72422e4 Don't let the flow multiplier affect retract/recover length 2017-07-27 04:14:29 -05:00
Scott Lahteine
fee696db5d Improve retract() for G10/G11/autoretract 2017-07-27 04:14:29 -05:00
Scott Lahteine
423b0f3a1e Replace MIN_RETRACT with MIN_AUTORETRACT, MAX_AUTORETRACT 2017-07-27 04:14:29 -05:00
Scott Lahteine
51864fd365 Add bed size as a configuration option 2017-07-26 23:04:54 -05:00
Scott Lahteine
dc7c95e07b Remove @ section fwretract 2017-07-26 22:46:16 -05:00
Dave Johnson
4718c09c48 Remove extraneous USBCON defines for AT90USB boards 
USBCON is definied by serial.h pullikng in MarlinConfig.h which in turn pulls in Arduino.h.  Defining in later includes has shown to cause compile issues so removing all extraneous calls for and potentially easier future linker troubleshooting.
more USBCON unification
 2017-07-23 16:41:48 -07:00
C. Scott Ananian
890e7a16a9 Add support for Printrbot Neopixel RGBW strip. 
Connected as described at http://printrbot.com/shop/led-strip/

Based on patch by Kelly Anderson <kelly@xilka.com> at
http://www.xilka.com/printrbot/marlin/1.1.4/20170707/
 2017-07-22 16:07:55 -05:00
Scott Lahteine
a059e95463 Bring Infitary i3 config up to date 2017-07-21 20:49:19 -05:00
Scott Lahteine
d6d6043548 Merge pull request #7338 from thinkyhead/bf_mks_ps_on_pin 
MKS 1.3+: Add pin mapping for PS_ON
 2017-07-21 20:00:26 -05:00
Alexey Shvetsov
851f9f5399 Update Russian translation - Part 1 
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
 2017-07-21 19:32:37 -05:00
Scott Lahteine
b7a16e4468 Merge pull request #7315 from fixoid/patch-1 
Fixing SWITCHING_EXTRUDER feature to work with HOTENDS > 1
 2017-07-21 19:10:54 -05:00
Alexey Shvetsov
f38b8c5bf8 MKS 1.3+: Add pin mapping for PS_ON 
This allows the use of D4 as PS_ON since MKS Gen doesn't have a PS_ON pin. However this effectively allows only 3 servos (instead of 4).

Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
 2017-07-21 18:50:05 -05:00
Scott Lahteine
8a3bc6be4d Improve FWRETRACT config options and commentary 
Add more details as requested in #7198
 2017-07-20 22:57:50 -05:00
Scott Lahteine
b0173ccdb9 Drop extra initializers for vars initialized by EEPROM code 2017-07-20 22:57:49 -05:00
Scott Lahteine
7afafb05b8 Split G10/G11 into separate functions 2017-07-20 02:24:13 -05:00
Scott Lahteine
c45798694f Add some more requirements to the G-code list 2017-07-20 02:24:13 -05:00
Scott Lahteine
72de280c1e BARICUDA valve pressure consistently uint8_t 2017-07-20 02:21:40 -05:00
Scott Lahteine
4d98e3f0a7 General cleanup 2017-07-20 02:21:40 -05:00
fixoid
e530c67349 Fixing SWITCHING_EXTRUDER feature 2017-07-19 21:15:26 +03:00
Tannoo
2ad3ca5d8a Bugfix (#7310) 2017-07-18 22:55:14 -05:00
Roxy-3D
37a6833d7e Allow the sampled point to be added into the Least Squares Best Fit (#7289) 
Without this...  The LSF won't work because none of the sampled points
in this code block get added.
 2017-07-13 16:33:02 -05:00
C. Scott Ananian
a519b093b9 Fix build by replacing qr_solve by least_squares_fit. (#7285) 
This was broken by 9af67e2446.
 2017-07-13 12:02:15 -05:00
Scott Lahteine
0873c667fa Apply coding standards to recent merges 2017-07-13 00:46:16 -05:00
Scott Lahteine
8c2907d10f Fix ABL broken by recent change 2017-07-12 22:56:18 -05:00
Roxy-3D
9af67e2446 Save 7714 bytes of program memory when doing AUTO_BED_LEVELING_LINEAR (#7276) 
We can save more and a pile of RAM by eleminating the eqnBVector and
EqnAMatrix arrays next.
 2017-07-10 19:05:11 -05:00
Scott Lahteine
76e90b93b7 Volatile keyword not needed for parser.seen 2017-07-10 15:38:54 -05:00
Jamie Bainbridge
00e4ced58e Stay in User Menu after command. Add feedback. 
When a user executes a User Menu command, the LCD returns to the main menu. If the user has multiple menu items they want to run, such as one menu item per bed leveling corner, then it's better to stay in the User Menu rather than return to the main menu.

This PR modifies Marlin to stay in the User Menu after a command.
 2017-07-10 13:47:12 -05:00
Scott Lahteine
1066b17457 Merge pull request #7260 from thinkyhead/bf_G33_update_27 
Updates to G33 and its LCD code
 2017-07-10 13:39:36 -05:00
Tannoo
e927941c06 Bugfix (#7265) 
Fix compile error when UBL is enabled but there is no LCD Panel.
 2017-07-08 09:44:50 -05:00
Scott Lahteine
68aea9c01d Merge pull request #7261 from thinkyhead/bf_configs_by_vendor 
Arrange more example configs by vendor
 2017-07-07 15:46:22 -05:00
Tannoo
aaacef9441 Corrections (#7231) 
20x4 map integration.    Also some minor changes to the UBL Menu layout.     Both 20x4 LCD's and Graphical LCD panels should have similar functionality now.
 2017-07-07 11:05:08 -05:00
LVD-AC
4bc79ec877 Updates for G33-LCD interface 2017-07-07 05:00:59 -05:00
Scott Lahteine
186580b55f Arrange example configurations by vendor 2017-07-07 04:48:23 -05:00
Scott Lahteine
6be369f3ea Add some config names to AUTHOR 2017-07-07 04:46:33 -05:00
Scott Lahteine
7fc31a7940 Merge pull request #7258 from thinkyhead/bf_cleanups_jbrazio 
Add support for BQ heated bed kit with Hephestos 2
 2017-07-07 04:11:07 -05:00
Scott Lahteine
11e376e920 Merge pull request #7256 from thinkyhead/bf_cleanup_july_6 
Assign -1 to LCD_PINS_D4-7 if not defined
 2017-07-07 03:22:47 -05:00
João Brázio
2065591daf Add support for BQ heated bed kit with Hephestos 2 2017-07-07 03:10:38 -05:00
essgcee
61be28133d Support for Creality CR-10 
Creality board is a Melzi / Sanguinololu variant, but using different pins for LCD control (and maybe other minor variations)
 2017-07-06 23:08:10 -05:00
Scott Lahteine
9248a90a4c Assign -1 to LCD_PINS_D4-7 if not defined 2017-07-06 22:47:51 -05:00
Scott Lahteine
5ef1e5ef60 Tweaks for M43 2017-07-06 21:47:50 -05:00
Scott Lahteine
c7732db99d Fix: Use of digitalRead, digitalWrite breaks on AT90USB 2017-07-06 21:25:56 -05:00
Scott Lahteine
f713f25fa5 Clean up excess whitespace 2017-07-06 21:24:30 -05:00
Scott Lahteine
fc9ce65095 Add BUSY_WHILE_HEATING for hosts that need it 2017-07-06 16:28:57 -05:00
Scott Lahteine
c6d430670a Clear SHOW_BOOTSCREEN with no LCD 2017-07-06 14:21:27 -05:00
Scott Lahteine
11c589c3ec Fix compile issue with G38 
Fixes #7250
 2017-07-06 14:21:27 -05:00
Scott Lahteine
678914be25 Patch M23 to work around Simplify3D bug 
Addressing #7227
 2017-07-06 14:00:58 -05:00
LVD-AC
3efe4aeef8 Add PROBE_MANUALLY support to G33 2017-07-04 18:06:54 -05:00
Scott Lahteine
cca1cca3a5 Merge pull request #7237 from thinkyhead/bf_cz_mapper 
UTF-8 mapper for Czech
 2017-07-04 16:45:13 -05:00
Scott Lahteine
a2babb532d Merge pull request #7217 from benlye/add-kill-action 
Add configurable action command to send when printer is killed
 2017-07-04 16:44:08 -05:00
Petr Zahradník
8c34233452 UTF-8 mapper for Czech 2017-07-04 15:51:23 -05:00
Dave Johnson
20f6676d63 DISABLE_[XYZ] compatibility check 
DISABLE_[XYZ] is incompatible with HOME_AFTER_DEACTIVATE and Z_SAFE_HOMING
 2017-07-03 17:23:53 -07:00
Ben Lye
c28749a567 Add kill action 
Sends pre-defined string as action command when printer is kill.
 2017-07-03 23:45:19 +01:00
Scott Lahteine
df87278fce Add "CAP:PRINT_JOB:1" (M75 / M76 / M77) to M115 output 2017-07-03 15:59:06 -05:00
Scott Lahteine
4be8d7720e Fix spelling of "Chinese" 2017-07-03 15:24:49 -05:00
LVD-AC
567941e341 Fix for issues #6997 and #7152 
Probing with the effector in the printing area, but an eccentric probe (e.g. allen key) outside it but still touching the bed gives meaninfull information for calibration. Since calibration is most accurate when probing as close to the towers as possible the testing was way to restrictive hence this fix.
 2017-07-03 02:53:49 -05:00
Scott Lahteine
57fff2e95e Merge pull request #7219 from thinkyhead/bf_update_git_scripts 
Update Marlin+git helper scripts
 2017-07-03 01:49:27 -05:00
Scott Lahteine
6a3967ee33 Corrections for probe_pt parameters 2017-07-03 01:34:27 -05:00
Scott Lahteine
534bffa7a9 Correct comment on ABL G29 2017-07-03 01:13:07 -05:00
Scott Lahteine
e1e1a0c344 Provide a default CUSTOM_BOOTSCREEN_TIMEOUT 2017-07-03 01:13:07 -05:00
Scott Lahteine
69297b2d7b Make all EEPROM optimization options available 2017-07-02 20:47:03 -05:00
Scott Lahteine
d609489b22 Drop setup_homepin 2017-07-02 02:27:09 -05:00
Scott Lahteine
167169e1bf Sanity check for a real probe with M48 2017-07-02 02:27:09 -05:00
Scott Lahteine
395a9f59ac Merge pull request #7211 from thinkyhead/bf_lcd_bootscreen 
Use lcd_bootscreen for both
 2017-07-02 02:11:07 -05:00
Scott Lahteine
14663efe0d Merge pull request #7210 from fiveangle/printrboard_revf_cleanup 
Printrboard RevF cleanup
 2017-07-02 01:02:26 -05:00
Scott Lahteine
ae5923a3d0 Make lcd_bootscreen common to both 2017-07-02 00:47:36 -05:00
Scott Lahteine
859248433f Patch for gcode debug 2017-07-02 00:47:35 -05:00
Dave Johnson
09c90c2f6c Printrboard RevF Cleanup 
-Update Arduino IDE extension descriptions
-Set default motor currents if not defined in Configuration_adv.h
-Support for MINIPANEL LCD
-Support for choosing internal or panel SD
 2017-07-01 22:33:39 -07:00
Scott Lahteine
232a10410d LCD_FOR_MELZI 2017-07-01 22:32:20 -05:00
Scott Lahteine
76c92a1fab Clean up some trailing spaces 2017-07-01 22:32:20 -05:00
Scott Lahteine
cf96109056 Implement the EEPROM_CHITCHAT option 2017-07-01 21:48:18 -05:00
Scott Lahteine
dcec7178d1 Expose DISABLE_M503 option as a test option 2017-07-01 21:31:28 -05:00
Scott Lahteine
3e78a01262 Merge pull request #7204 from thinkyhead/bf_update_ubl_lcd 
UBL radar map corrections
 2017-07-01 20:59:03 -05:00
Tom
1ff7d10c80 Add configuration for Infitary M508 (i3 clone) 
Based on Infitary's own firmware settings.
 2017-07-01 20:04:08 -05:00
Scott Lahteine
4cb45c10dd Patch ubl lcd mesh map indentation 2017-07-01 19:47:52 -05:00
Scott Lahteine
abd6ba62b4 Some cleanups for ubl lcd mesh map 2017-07-01 19:47:49 -05:00
Scott Lahteine
f17bae1f70 Changes for ubl_lcd_map_control patch 2017-07-01 19:47:02 -05:00
Tannoo
8e0f3b7eba UBL radar map corrections 2017-07-01 19:00:44 -05:00
Bob-the-Kuhn
fcceed5be6 intermittent Teensy & G26 compile problem 
===============================================

also an issue with ubl_motion.cpp
 2017-07-01 14:41:24 -05:00
Scott Lahteine
30b327d24c Finish the solution for #7166 2017-06-29 15:17:39 -05:00
Scott Lahteine
6c97c5595c Add a sanity check for DELTA_AUTO_CALIBRATION 2017-06-29 15:03:19 -05:00
Bob-the-Kuhn
e6e3132f79 make LETTTER_OFF return values that match param indices range 2017-06-29 09:01:58 -05:00
Bob-the-Kuhn
bfbf5f8200 correct value_bool() when FASTER_GCODE_PARSER is enabled 
Also corrected compile issue when DEBUG_GCODE_PARSER and
AUTO_BED_LEVELING_UBL are both enabled.
 2017-06-28 19:51:08 -05:00
Scott Lahteine
406ef69702 Move Anet A8 config to subfolder 2017-06-28 16:58:57 -05:00
Scott Lahteine
379926961c Add Anet A6 config, edit Anet A8 config 2017-06-28 16:58:57 -05:00
Scott Lahteine
5b03f23fa2 Bring configurations up to date, fix some comments 2017-06-28 16:41:49 -05:00
Scott Lahteine
e3cedfa0ec Fix a compiler warning 2017-06-28 16:41:46 -05:00
Scott Lahteine
bb0508b6cf Fix comment in M115 code 2017-06-28 13:08:33 -05:00
Scott Lahteine
85777a56c6 Add A (action) and E (echo) parameters to M118 2017-06-28 02:07:59 -05:00
Scott Lahteine
d1e8d4cd9d Merge pull request #7167 from thinkyhead/bf_20x4_lcd_update 
UBL Map Cleanup and LCD display
 2017-06-28 01:20:22 -05:00
Scott Lahteine
b492e0878d Changes to reduce and simplify 2017-06-28 01:10:30 -05:00
Ben Lye
98d362c2da Adding M118 command to send text to serial 
Allows the user to send text to the serial console in order to
communicate with a host - sending debuging information or action
commands, for example.  Text must begin with '//' and this is added if
it is not already present at the beginning of the string.
 2017-06-28 00:55:20 -05:00
Tannoo
80abc872f3 Updated to better support the coming "radar" 2017-06-27 22:51:58 -05:00
Tannoo
e90cbf5c16 UBL Map Cleanup 2017-06-27 22:51:58 -05:00
Scott Lahteine
fc140c4962 Followup for I2C_POSITION_ENCODERS 2017-06-27 20:46:40 -05:00
Scott Lahteine
f4246dc8ff Merge pull request #7165 from thinkyhead/bf_parser_shorthand 
Use parser.seenval, add shorthand functions
 2017-06-27 18:57:48 -05:00
Scott Lahteine
bd776df8c1 Optimize seen_axis by moving 'X' to index 24 2017-06-27 18:47:11 -05:00
Scott Lahteine
05449cf6ee Add shorthand value accessors to gcode.h 2017-06-27 18:39:41 -05:00
Scott Lahteine
12f092c812 Cleanups to gcode.h, use seenval() 2017-06-27 17:57:00 -05:00
Scott Lahteine
941943c167 Apply const, spacing, etc. 2017-06-27 05:23:49 -05:00
Scott Lahteine
5b11b33854 Add support for Průša MK2 Multiplexer 2017-06-27 04:55:30 -05:00
Scott Lahteine
a4a587a897 Fix spelling of Průša 2017-06-27 04:46:46 -05:00
Scott Lahteine
ba1706a265 Fix spacing in gcode.cpp 
Followup to #6940
 2017-06-27 04:46:46 -05:00
Scott Lahteine
c2c8aafda2 Merge pull request #7157 from thinkyhead/bf_g33_f_parameter 
G33 F and Height bug fix
 2017-06-27 04:36:22 -05:00
Scott Lahteine
627afb29df Merge pull request #7109 from tnw513/fix-italian 
added missing italian translation
 2017-06-27 04:12:30 -05:00
Scott Lahteine
f0f9fb7465 Remove line that does nothing 2017-06-27 04:08:50 -05:00
LVD-AC
99592c8458 Update G33: Add F, fix height bug 2017-06-27 04:02:02 -05:00
Ben Lye
31514f453a Fix #ifdef AVR_AT90USB1286_FAMILY in pinsDebug 
Can't compile with PINS_DEBUGING enabled on Atmega1284p because it tries
to enumerate pins 46 and 47 (which don't exist) because `#ifdef
AVR_AT90USB1286_FAMILY ` doesn't work as expected.
 2017-06-27 08:04:40 +01:00
Scott Lahteine
134116b874 Merge pull request #7153 from thinkyhead/bf_czech_update 
Updated Czech language
 2017-06-26 17:34:15 -05:00
Petr Zahradník
e80958b631 CZ Translate BLTouch and UBL 
Fixup length
 2017-06-26 16:15:31 -05:00
Scott Lahteine
fe7e890b09 Fix issues with ADC_KEYPAD 
Fixes #7150
 2017-06-26 16:08:31 -05:00
dot-bob
a1632cfa0a Added option 'H' to G29 P4. 
- Added `H` to set a nozzle height adjustment to surface of the bed.
- Updated G29 P4 comments to reflect changes.
 2017-06-25 17:14:08 -05:00
Scott Lahteine
e687782875 Merge pull request #7134 from thinkyhead/bf_skynet_a3_ready 
Add Skynet/ANET A10 support
 2017-06-25 14:35:22 -05:00
dot-bob
b3c36c98fd Edit digipot currents via LCD, save to EEPROM 2017-06-25 01:02:36 -05:00
Scott Lahteine
3c7bfe798d Various cleanups ahead of digipot save 2017-06-24 23:56:24 -05:00
Bob-the-Kuhn
9651d01e1a Add Skynet/ANET A10 support 2017-06-24 19:07:03 -05:00
Scott Lahteine
eb314373bb Config spacing & consistency, group custom LCDs 2017-06-24 14:33:40 -05:00
Scott Lahteine
6c45fa7dcc Apply #elif in LCD conditionals 2017-06-24 13:56:33 -05:00
Scott Lahteine
afbc6e3e2f Update DELTA/SCARA config comments 2017-06-24 12:47:17 -05:00
Paweł Stawicki
1e47c17b46 Fix: set digipot mcp4018 Vrefmax to 1.666V 2017-06-24 12:35:34 -05:00
Scott Lahteine
80a232419d CNC workspace planes and 'P' argument for G2/G3 2017-06-23 14:53:03 -05:00
Scott Lahteine
5fb0d401eb Formatting tweaks 2017-06-23 14:53:02 -05:00
Scott Lahteine
ed04d0b6be Label DualXMode enums 2017-06-23 14:53:02 -05:00
Scott Lahteine
786cdea124 Ensure REPRAPWORLD_KEYPAD_MOVE_STEP is defined 2017-06-23 14:53:01 -05:00
Scott Lahteine
ee7163fd3a Fix pinsDebug compile errors 2017-06-23 14:53:01 -05:00
Scott Lahteine
a9f8e518bf Fix FILAMENT_WIDTH_SENSOR infinite loop issue 
Addressing #6992 and #5851
 2017-06-23 14:53:01 -05:00
Scott Lahteine
254a11b083 Merge pull request #7120 from thinkyhead/bf_sainsmart_link 
Add link to F. Malpartida LiquidCrystal library
 2017-06-22 14:04:23 -05:00
Scott Lahteine
aeb6d465a4 Merge pull request #7118 from thinkyhead/bf_french_update 
French update
 2017-06-22 13:10:07 -05:00
Bob-the-Kuhn
325f09ea6c Add link to custom LiquidCrystal library by F. Malpartida 2017-06-22 13:07:08 -05:00
MagoKimbra
d26c8cc5c8 fix_planner_refresh_e_positioning (#7103) 
* fix_planner_refresh_e_positioning

* Fix
 2017-06-22 12:59:22 -05:00
Gege2B
c7f04fbcc7 French translation 2017-06-22 12:49:23 -05:00
Silvio Didonna
4171520729 added missing italian translation 2017-06-21 11:08:39 +02:00
Bob-the-Kuhn
41bfff14e2 Merge pull request #6991 from Bob-the-Kuhn/Mesh-with-babystepping 
Mesh with BABYSTEP_ZPROBE_OFFSET: add sanity check
 2017-06-20 16:36:22 -05:00
Scott Lahteine
424d0bae8b Merge pull request #7100 from thinkyhead/bf_HAL_prepare 
Apply maths macros and type changes ahead of HAL
 2017-06-20 01:15:23 -05:00
Scott Lahteine
5c59ee4e93 Use current (raw) Z if omitted from G29 WXY or G29 WIJ. 2017-06-20 00:10:52 -05:00
Scott Lahteine
37bc0fce62 Make G29 compatible with M206 Z and G92 Z 
Use the raw position for mesh measurement. Otherwise the `M206` and
`M92` Z offsets will get canceled out by bed leveling. The downside is
`G29` will not compensate for a poorly set small `M206` fudge value.

To elaborate on this issue, imagine you are probing with a Z home
offset of -0.1, meaning when Z homes, -0.1 is the current position,
implying the ideal bed zero for the nozzle is 0.1mm higher than the Z
endstop. Ordinarily when printing, Z would raise 0.1mm higher.

What happens when we probe is that all points are measured with that
-0.1 included. So when bed leveling is enabled the `M206 Z` offset gets
exactly canceled out by the bed readings.
 2017-06-20 00:09:59 -05:00
Scott Lahteine
6c45d0fd81 Apply maths macros and type changes ahead of HAL 2017-06-19 22:57:42 -05:00
Scott Lahteine
8a51e2960c Improve the experience of editing steps_per_mm 2017-06-19 22:17:15 -05:00
Scott Lahteine
725d9d9a56 Fix and improve LCD value editing display 
- Fix: When "100.0" changes to "99.0" the LCD shows "199.0"
- Use 2 rows if needed on character LCD, (allowing longer labels…
Germany, et. al.)
- Known issue: A certain length label combined with a certain value
drawing function could, for example, display 99.0 on 1 line, but 100.0
on two lines. Workaround would be to pass a nominal value size argument.
 2017-06-19 22:17:15 -05:00
Scott Lahteine
499bb85a95 Clean up, put ubl menu itemization closer at hand 2017-06-19 22:17:14 -05:00
Tannoo
90f5f82926 Step-by-Step Menu addition 2017-06-19 20:15:11 -05:00
Scott Lahteine
0c616700f3 Merge pull request #7097 from thinkyhead/bf_dac_percents_fix 
Convert DAC percent to uint8_t
 2017-06-19 17:58:55 -05:00
Florian Heilmann
6dcf42f1a7 Add Z Fade Height to M420 output if it is enabled (#7042) 
* Add Z Fade Height to M420 Output

Echo the z-fade height when M420 is called, if it is enabled.

* Fix Whitespace

* Fix Compiler complaint

* Missing semi-colon
 2017-06-19 17:53:07 -05:00
Bob-the-Kuhn
a1c65fd3d5 convert DAC percent to uint8_t 
=====================

add test to Travis
 2017-06-19 17:46:41 -05:00
Scott Lahteine
907cafcbfd Support for two switching extruders 2017-06-19 17:20:59 -05:00
Ross Allan
cfcd069501 Fix #5699 - LIN_ADVANCE freeze when ADV_RATE returns 0 2017-06-19 14:02:17 -05:00
Scott Lahteine
b8b7ef1902 Merge pull request #7090 from thinkyhead/bf_italian_refix 
Fix Italian language mapper
 2017-06-19 09:27:13 -05:00
Scott Lahteine
42f7f9e013 Merge pull request #7060 from bgort/i2cpefix 
I2C Position Encoders Example Configs
 2017-06-19 01:08:42 -05:00
Scott Lahteine
0b49bddec2 Fix Italian language mapper 2017-06-19 01:01:40 -05:00
Silvio Didonna
2e26a7c752 Added missing Italian translations 2017-06-18 23:37:48 -05:00
Scott Lahteine
4c3dc8bf07 Remove set_current_to_destination from resume_print 
Addressing #7057
 2017-06-18 23:01:13 -05:00
Scott Lahteine
4857a3ba48 Formatting and spelling 2017-06-18 23:01:12 -05:00
Thomas Moore
3d24c329af M600 fixes 2017-06-18 23:00:56 -05:00
Bob-the-Kuhn
8fb30aaed6 warn user of an invalid combination 2017-06-17 15:04:47 -05:00
Bob-the-Kuhn
6cb9bb27fe Move lcd_refresh_zprobe_zoffset definition 2017-06-16 21:46:33 -05:00
Scott Lahteine
d4270f15a9 Spacing tweak in setup() 2017-06-16 14:21:05 -05:00
Scott Lahteine
c61c0a9aeb Fix status message missing "blink" 2017-06-16 14:18:19 -05:00
Scott Lahteine
062131554f Followup to #7045 2017-06-16 14:18:19 -05:00
Jim Brown
3d043976f7 Add option to disallow filament change without homing first 2017-06-16 13:32:17 -05:00
Scott Lahteine
93da4e83f7 One more space on a short status message 2017-06-16 12:58:25 -05:00
Scott Lahteine
7c95f762f2 Show LCD bed options even without thermal protection 2017-06-15 15:29:56 -05:00
Scott Lahteine
92eb55f246 Reject generous donation of trailing whitespace 2017-06-15 15:25:24 -05:00
Scott Lahteine
428be27893 Formatting adjustments 2017-06-15 15:25:24 -05:00
Scott Lahteine
8d5a37fb3d Support for a 5th stepper in stepper code 2017-06-15 15:25:23 -05:00
Scott Lahteine
7769a22064 Tweaks to temperature code 2017-06-15 15:25:23 -05:00
Scott Lahteine
d9da126776 Cleanups for UBL / ultralcd.cpp 2017-06-15 15:22:36 -05:00
Scott Lahteine
499d5c3b24 Fix scrolling lcd message for DOGM 2017-06-15 15:07:39 -05:00
Scott Lahteine
7164fd499e Tweak to G33 P error 2017-06-15 14:43:40 -05:00
Scott Lahteine
c10d763d98 Simpler prepare move conditions 2017-06-15 14:43:40 -05:00
Scott Lahteine
4ebff8eaa5 Drop fastio timer cruft 2017-06-15 14:43:40 -05:00
Scott Lahteine
09bc34f4dc Allow arbitrarily long retraction 2017-06-15 14:43:30 -05:00
Scott Lahteine
4414825e0d Merge pull request #7038 from thinkyhead/bf_PCA9632 
PCA9632 PWM color LED support
 2017-06-15 14:41:24 -05:00
Bob-the-Kuhn
9dda022705 fix compile errors 
================================

Changed to conditional compile for AT90USB issue
 2017-06-15 13:18:14 -05:00
Bob-the-Kuhn
b3338ccb01 Merge pull request #6954 from Bob-the-Kuhn/Software-SPI-for-all-CPUs 
SD card soft SPI - allow all CPU families to use it
 2017-06-15 01:03:39 -05:00
Brian
40bb0cbf7a example configurations, etc. 2017-06-14 18:04:28 -04:00
Jim Brown
26d20ebcfc Don't allow filament change without homing first (#7054) 2017-06-13 17:11:37 -05:00
Roxy-3D
824f71d503 LCD Panel Interactive Mesh Editing (#7045) 
Original Mesh Bed Leveling replacement put at top of UBL Menu Options to
help facilitate the removal of the Original Mesh Bed Leveling.

Radar display (and control) of the UBL Interactive Mesh Editing.
 2017-06-12 18:26:49 -05:00
Scott Lahteine
445227c807 Fix missing LCD_STR_REFRESH 2017-06-12 01:28:52 -05:00
Scott Lahteine
699aa35df6 Code cleanup for G33 2017-06-12 01:25:40 -05:00