Commit Graph

1282 Commits

Author SHA1 Message Date
Scott Lahteine
15229d988b Fix compile error for bed matrix in M48 2016-06-22 14:04:46 -07:00
Scott Lahteine
c01352cbd5 Add a dependency for z servo macros 2016-06-22 14:04:23 -07:00
Scott Lahteine
c3794bd695 Add HAS_PROBING_PROCEDURE conditional 2016-06-22 14:03:22 -07:00
Scott Lahteine
bb9c67b4b5 Tweak some feedrate vars 2016-06-22 03:27:31 -07:00
Scott Lahteine
5158bd6e93 Screen out G29 E for sled and allen key, allow single probe 2016-06-22 03:20:33 -07:00
Scott Lahteine
ccae92588d Cleanup debug in G28 and G29 2016-06-22 03:20:33 -07:00
Scott Lahteine
b4a9d2366c Use a macro for kinematic sync_plan_position 2016-06-22 03:20:33 -07:00
Scott Lahteine
bfccf26294 Use sync_plan_position_delta where needed 2016-06-22 03:20:33 -07:00
Scott Lahteine
a6b8c67df4 Move probe deploy after setup call in G29 2016-06-22 03:20:33 -07:00
Scott Lahteine
e69916d1bd Split up endstop_move functions 2016-06-22 03:20:33 -07:00
Scott Lahteine
0e18a4897b Simpler handling of sled/allen-key in probe_pt 2016-06-22 03:20:33 -07:00
Scott Lahteine
1a92e2ef18 Comment on run_z_probe 2016-06-22 03:20:33 -07:00
Scott Lahteine
68e0e5855e For all probes, at the end of G29 simply raise and stow 2016-06-22 03:20:33 -07:00
Scott Lahteine
c3023f8cc5 Make M401/M402 available with HAS_BED_PROBE 2016-06-22 03:20:33 -07:00
Scott Lahteine
9f0c255c69 Show uncorrected position in set_bed_level_equation_3pts 2016-06-22 03:20:33 -07:00
Scott Lahteine
07298ac992 Initialize current_position to home_offset on boot 2016-06-22 03:20:33 -07:00
Scott Lahteine
d50539583a Make XY_PROBE_SPEED a general probe option 2016-06-22 03:04:47 -07:00
Scott Lahteine
2798499b71 XY_TRAVEL_SPEED => XY_PROBE_SPEED 2016-06-22 02:45:25 -07:00
Scott Lahteine
88dc543584 Add a macro for XY_TRAVEL_FEEDRATE 2016-06-22 02:23:50 -07:00
Scott Lahteine
3996242e9d Allow Z_MIN_PROBE_REPEATABILITY_TEST solo 2016-06-21 01:56:40 -07:00
Scott Lahteine
26a9cd0b08 Move run_z_probe to earlier block 2016-06-21 01:25:23 -07:00
Scott Lahteine
7f8a2025af Move raise_z_after_probing into earlier block 2016-06-21 01:03:40 -07:00
Scott Lahteine
2530371516 Always disable probe at the end of G29 2016-06-20 16:40:44 -07:00
Scott Lahteine
6aba98e470 Comment on setup_for_endstop_move 2016-06-20 16:40:44 -07:00
Scott Lahteine
04e88d008e Clear up ordering in G30 2016-06-20 16:40:44 -07:00
Scott Lahteine
ed75b0ea11 Make clean_up function available for probes 2016-06-20 16:28:45 -07:00
Scott Lahteine
51d52cb52a Make run_z_probe available for any bed probe 2016-06-20 16:02:36 -07:00
Scott Lahteine
f6b09cf465 Always use deploy/stow for dock_sled 2016-06-20 15:51:01 -07:00
Scott Lahteine
3b457c2dd3 Use deploy/stow with FIX_MOUNTED_PROBE too 2016-06-20 15:25:01 -07:00
Scott Lahteine
7e9d4a68d4 Always raise Z (if needed) for servo deploy/stow 2016-06-19 20:17:13 -07:00
Scott Lahteine
9beb3f2f5e Merge pull request #4097 from thinkyhead/rc_fil_runout_cleanup
FIL_RUNOUT_INVERTING false by default
2016-06-19 19:46:14 -07:00
Scott Lahteine
f215b30932 Merge pull request #4093 from thinkyhead/rc_probe_without_abl
Make Z Probe options independent of ABL
2016-06-19 19:44:25 -07:00
Scott Lahteine
2fd2301928 FILRUNOUT => FIL_RUNOUT 2016-06-19 19:25:26 -07:00
Scott Lahteine
de12228758 Make Z Probe options independent of ABL 2016-06-19 18:47:27 -07:00
Scott Lahteine
add0032820 Improve FILAMENT_RUNOUT_SENSOR, FILRUNOUT_PIN 2016-06-19 18:13:33 -07:00
Scott Lahteine
400e13d136 Output a message for SD read errors 2016-06-19 17:14:56 -07:00
Roxy-3D
96b8bcca84 Merge pull request #4081 from thinkyhead/rc_tweaky_m48_tweaks
Cleanup of M48
2016-06-18 22:21:16 -05:00
Scott Lahteine
b7e3c1bbc4 Tweak M48 output conditions 2016-06-18 16:17:53 -07:00
Scott Lahteine
1dad912b03 Adjust M48 raise / move handling 2016-06-18 15:38:24 -07:00
Scott Lahteine
46d3ef2223 Simplify sample_set probe_pt call in M48 2016-06-18 15:38:23 -07:00
Scott Lahteine
a647b05f82 Shrink some debug code in G28 2016-06-18 15:38:23 -07:00
Scott Lahteine
4edf813bde Just-in-time declaration style in M48 2016-06-18 15:38:23 -07:00
Juan Ricardo Gomez Anaya
c475291e19 Fix M851
Minor change missing in the process of standardize the gcode M851
2016-06-18 15:19:07 -07:00
Scott Lahteine
4e860babbc Allow setting xy_travel_speed for delta leveling also 2016-06-18 01:40:49 -07:00
Scott Lahteine
d36d4edd80 Tweak partial homing code 2016-06-18 01:16:50 -07:00
Scott Lahteine
d3a05de96e Save and restore feedrate in probe functions 2016-06-18 01:16:26 -07:00
Scott Lahteine
defcacc1a9 Delete some obsolete Z servo macros 2016-06-17 18:49:17 -07:00
Scott Lahteine
3a150f07c2 Merge pull request #4073 from thinkyhead/rc_temp_mystery
Minor tweaks to M109 / M190
2016-06-17 17:49:50 -07:00
Scott Lahteine
bd4ec727e7 Merge pull request #4066 from thinkyhead/rc_M851_with_probe
Make M851 standard with a bed probe
2016-06-17 17:32:55 -07:00
Scott Lahteine
692a6e7c91 Merge pull request #4065 from thinkyhead/rc_goodbye_xy_servos
Remove support for XY servo endstops
2016-06-17 17:32:08 -07:00
Scott Lahteine
de177ba6c9 Minor tweaks to M109 / M190 2016-06-17 17:26:21 -07:00
Scott Lahteine
1000563d80 Make M851 standard with a bed probe 2016-06-17 15:19:42 -07:00
Scott Lahteine
f66a194159 Merge pull request #4062 from jbrazio/bugfix/compiler-warnings
Fixes misc gcc warnings
2016-06-17 14:23:28 -07:00
Scott Lahteine
1bed392c68 HAS_Z_ENDSTOP_SERVO => HAS_Z_SERVO_ENDSTOP 2016-06-17 14:20:17 -07:00
Scott Lahteine
47ce810f52 Remove support for XY servo endstops 2016-06-17 14:19:17 -07:00
João Brázio
d1e5dc6319
Fixes misc gcc warnings 2016-06-17 20:24:24 +01:00
Scott Lahteine
ef3bef6b9e Fix feedrate in gcode_T (max_feedrate is mm/s) 2016-06-16 16:03:14 -07:00
MagoKimbra
008d0637dd Fix gcode_T 2016-06-16 09:05:36 +02:00
Scott Lahteine
da90bbe0eb Merge pull request #4010 from thinkyhead/rc_toolchange_adjust
Fixup position adjustment on toolchange
2016-06-15 21:10:33 -07:00
Scott Lahteine
4b93989a77 MBL Z adjustment on toolchange 2016-06-15 20:49:36 -07:00
Scott Lahteine
9c800d1f8c Position adjustment for bed leveling 2016-06-15 20:49:36 -07:00
esenapaj
44f091a413 Fix for the PR #4023(Add macros to move servos)
・Add missing ')'
2016-06-15 22:34:55 +09:00
Scott Lahteine
52ac2a62ee Merge pull request #4013 from thinkyhead/rc_toolchange_no_move
Use "Tn S1" to change tools without moving
2016-06-14 20:13:01 -07:00
Scott Lahteine
d2a00b74e3 Merge pull request #4004 from thinkyhead/rc_feedrate_in_gcode_T
Use linear feedrate in gcode_T, not volumetric
2016-06-14 20:10:08 -07:00
Scott Lahteine
8d8180e028 Parse M905 args in Marlin_main.cpp 2016-06-13 19:25:28 -07:00
Scott Lahteine
2b340f5acb patch LIN_ADVANCE to use code_value_float 2016-06-13 18:54:25 -07:00
Scott Lahteine
b708196770 Merge pull request #4032 from AnHardt/bootscreen-delay
Show bootscreen later
2016-06-13 18:27:05 -07:00
Scott Lahteine
587de1b6b6 Merge pull request #3676 from thinkyhead/rc_lin_advance_feature
Advance extrusion algorithm – LIN_ADVANCE
2016-06-13 18:04:58 -07:00
AnHardt
b4fedec0d1 Show bootscreen later
Init display and show bootscreen later, but init display in `kill()`
to init outputs before the bootscreen delays but being able to display
kill errors.
2016-06-14 01:59:50 +02:00
Scott Lahteine
4fbe818163 Add macros to move servos 2016-06-12 15:38:30 -07:00
Scott Lahteine
7fb69e24fb Use "Tn S1" to change tools without moving 2016-06-11 15:58:45 -07:00
Scott Lahteine
b75e648f2c Clarify names of prepare_move functions 2016-06-11 15:32:49 -07:00
Scott Lahteine
0e2bfd0769 Use linear feedrate in gcode_T, not volumetric 2016-06-10 18:27:01 -07:00
Scott Lahteine
6d62a4ffc8 Patch LIN_ADVANCE for style and forward-compatibility 2016-06-09 21:03:27 -07:00
Sebastianv650
fb8e880734 Add LIN_ADVANCE 2016-06-09 21:03:27 -07:00
Scott Lahteine
e2d4919c01 Merge pull request #3991 from thinkyhead/rc_axis_units
Rename some vars to clarify their relationship to acceleration
2016-06-09 20:57:01 -07:00
João Brázio
5b5aa1572b Non-blocking buzzer 2016-06-09 20:20:05 -07:00
Scott Lahteine
72c6f2923f axis_steps_per_unit => axis_steps_per_mm 2016-06-09 17:04:51 -07:00
Scott Lahteine
cb4704e07a Rename some planner acceleration vars
- `per_sq_second` => `per_s2`
- `per_sqr_second` => `per_s2`
- `axis_steps_per_sqr_second` => `max_acceleration_steps_per_s2`
2016-06-09 17:04:50 -07:00
Scott Lahteine
4980ecc1f7 Smaller binary using inline gcode argument getters 2016-06-08 17:03:28 -07:00
Reid Rankin
16212432c9 G20/21 and M149 support, and code_value() refactor
This is an update of MarlinDev PR #196.

G20/21: support for switching input units between millimeters and
inches.
M149: support for changing input temperature units.

In support of these changes, code_value() and code_value_short() are
replaced with an array of functions which handle converting to the
proper types and/or units.
2016-06-08 16:51:10 -07:00
Scott Lahteine
cca047424d MBL: cel => cell 2016-06-07 19:10:39 -07:00
Scott Lahteine
43947072d5 Merge pull request #3895 from thinkyhead/rc_singlenozzle_part_2
SINGLENOZZLE: EXTRUDERS versus HOTENDS
2016-06-04 15:23:17 -07:00
Scott Lahteine
d7e4e8e9be Fix a typo in #3955 2016-06-04 02:09:58 -07:00
Scott Lahteine
c2362c1b3c Apply Marlin coding standards to MBL class 2016-06-03 21:43:32 -07:00
Edward Patel
c06de0f097 MBL: Added keeping MBL active when homing single axises for #3750 2016-06-03 21:42:29 -07:00
Scott Lahteine
f2fb66c00d With SINGLENOZZLE only set temperature for the active tool 2016-06-03 17:38:03 -07:00
Scott Lahteine
cd441ce652 SINGLENOZZLE: EXTRUDERS versus HOTENDS 2016-06-03 17:38:03 -07:00
Scott Lahteine
32f8300cc6 Merge pull request #3944 from thinkyhead/rc_eboston_lcd_contrast
Improved LCD contrast handling
2016-06-03 17:08:41 -07:00
Scott Lahteine
4e13cd3f35 Merge pull request #3955 from MagoKimbra/RCBugFix
Fix M428 width DELTA & SCARA
2016-06-03 15:50:37 -07:00
Scott Lahteine
8529122af1 Merge pull request #3946 from thinkyhead/rc_g28_servo_raise_before_stow
Raise the servo probe before stow outside ABL context
2016-06-03 15:45:36 -07:00
MagoKimbra
f499be084a Fix M428 width DELTA & SCARA 2016-06-03 23:23:23 +02:00
Scott Lahteine
664b299a51 This fix is not DELTA compatible 2016-06-02 17:16:19 -07:00
Scott Lahteine
064efb20e0 Also call clear_command_queue for lcd_sdcard_stop 2016-06-02 17:16:19 -07:00
Scott Lahteine
6277395e1e set_current_position_from_planner() after stepper.quick_stop() 2016-06-02 17:16:19 -07:00
Scott Lahteine
381bc6f0b0 set_position => set_position_mm 2016-06-02 17:16:19 -07:00
Scott Lahteine
9eecb4404b Make raise_z_after_probing null sometimes 2016-06-02 16:56:49 -07:00
Scott Lahteine
b3a37b493d Patch G28 servo stow to use Conditionals, raise_z_after_probing 2016-06-02 16:56:49 -07:00
Scott Lahteine
efa7209acf Improved LCD contrast handling
Based on MarlinFirmware/MarlinDev#200 from @eboston
2016-06-02 16:17:34 -07:00
lrpirlet
3aefa04386 Raise the servo probe before stow outside ABL context 2016-06-01 21:53:45 +02:00
Scott Lahteine
d698c89971 Fix bad movement in gcode_T when switching 2016-05-31 19:14:33 -07:00
Scott Lahteine
1a01a44a94 Merge pull request #3936 from thinkyhead/rc_sav_mk1
Support for SAV_3DGLCD OLED LCD controller
2016-05-31 18:46:25 -07:00
Scott Lahteine
bd97bbc52a Make HAS_LCD_CONTRAST a boolean flag 2016-05-31 11:47:02 -07:00
Scott Lahteine
55ef04a566 Need to call dac_init() in setup() for DAC_STEPPER_CURRENT
As reported by https://github.com/MarlinFirmware/Marlin/pull/3182#issuecomment-222595488
2016-05-30 23:35:06 -07:00
Scott Lahteine
360adc6a3b Small reduction in M421 code 2016-05-23 14:25:42 -07:00
Scott Lahteine
a4ed988c60 Two index finding functions for MBL 2016-05-23 14:25:42 -07:00
Scott Lahteine
cadf441059 Merge pull request #3798 from AnHardt/extend-M421
Extend M421 with I and J parameters
2016-05-20 16:17:23 -07:00
AnHardt
f5a036510f Extend M421 with I and J parameters
Extend M421 with I and J parameters
2016-05-21 00:18:09 +02:00
Edward Patel
c7d90dc5ec Add option to configure G28 all axis resting position for MBL 2016-05-20 11:52:27 -07:00
Scott Lahteine
8218558953 Update comments, rename next_ping_ms, followup to #3797 2016-05-19 16:44:57 -07:00
AnHardt
e761bdbb4b Remove SF_ARC_FIX from G5 (Cubic B-spline)
Remove SF_ARC_FIX from G5 (Cubic B-spline).
SF_ARC_FIX is a fix for G2/G3 (arcs) where Skeinforge always produced relative instead of absolute coordinates for the endpoint of an arc.
It's very unlikely this is also a problem with Cubic B-splines. More likely is copying from the G2/G3 code.
2016-05-19 21:00:12 +02:00
AnHardt
2207001333 No compromises for the manage_heater()
No compromises for the manage_heater(). manage_heater() will return immediately when there is nothing to do, but needs a constant detaT to work proper.
Calling idle() only every 200ms results in a display update every ~2 seconds - that should be enough.
For the other functionalities in idle() and manage_inactivity() 200ms is a lot but hopefully works.
2016-05-19 20:52:11 +02:00
João Brázio
e6effb8f35
Implements S1 argument in M999 2016-05-19 00:13:33 +01:00
Scott Lahteine
4041508ffb Function decl. in headers don't need "extern" 2016-05-17 18:35:01 -07:00
Scott Lahteine
d66e53c42b Merge pull request #3782 from thinkyhead/rc_home_z_before_g29
Require homing of Z before G29
2016-05-17 17:53:56 -07:00
Scott Lahteine
552516ddf5 Merge pull request #3781 from AnHardt/minor-delta-segmenting-speedup
Minor DELTA segmentation speedup
2016-05-17 17:17:38 -07:00
Scott Lahteine
a28970784c XYZ unhomed 2016-05-17 17:02:53 -07:00
Scott Lahteine
a9926b71a4 Require homing of Z before G29 2016-05-17 16:57:12 -07:00
AnHardt
41e9569dbc Minor DELTA segmentation speedup
Minor DELTA segmentation speedup by pulling calculations out of the loop.
2016-05-18 01:49:30 +02:00
Scott Lahteine
3016dfe484 Merge pull request #3744 from thinkyhead/rc_bezier_curves
Add BEZIER_CURVE_SUPPORT — G5 command
2016-05-17 13:57:38 -07:00
Scott Lahteine
d0ac4541d3 Merge pull request #3775 from jbrazio/bugfix/followup-3770
G29: Report final position back to host when using MBL
2016-05-17 13:55:26 -07:00
João Brázio
b6a3aef297
G29: Report final position back to host when using MBL 2016-05-17 01:27:59 +01:00
esenapaj
95f30529a6 Add stowing process for MECHANICAL_PROBE 2016-05-16 18:12:10 +09:00
esenapaj
e2b87f6c85 Separate Z_PROBE_ALLEN_KEY from MECHANICAL_PROBE 2016-05-16 18:12:10 +09:00
Scott Lahteine
754b0152f5 Fix MBL zigzag calls 2016-05-15 12:35:01 -07:00
Scott Lahteine
13175ce7da Fix error checking in M421 2016-05-14 17:12:44 -07:00
João Brázio
8a18c52002 Adds an option to disable print job timer auto start 2016-05-14 15:22:44 -07:00
João Brázio
a79267217b M78 now allows stats reset using the S78 argument 2016-05-14 15:22:44 -07:00
Scott Lahteine
a713043acd Merge pull request #3749 from esenapaj/patch-3
Enclose all #error strings by double-quotes
2016-05-14 15:01:56 -07:00
Scott Lahteine
3cfea3ff12 Merge pull request #3752 from AnHardt/fix-FIX_MOUNTED_PROBE
G29 missing FIX_MOUNTED_PROBE condition
2016-05-14 15:00:42 -07:00
Scott Lahteine
ddac17a195 Add BEZIER_CURVE_SUPPORT (G5 XYZEFIJPQ) 2016-05-14 14:52:08 -07:00
AnHardt
8a4376d51f Idle during long arcs
Idle during long arcs
to prevent from watchdog resets during high segmented fast arcs.
2016-05-14 00:29:13 +02:00
esenapaj
888443ca1e Enclose all #error strings with apostrophes 2016-05-13 21:10:23 +09:00
AnHardt
b74af78736 Make arc support (G2/G3) configurable
Saves about 2669 bytes when deactivated. (About 1% for a AT2560, about __4%__ for a AT644!)
2016-05-13 13:27:45 +02:00
AnHardt
aef2559bd8 fix-FIX_MOUNTED_PROBE
Add a forgotten condition
2016-05-13 12:07:17 +02:00
Scott Lahteine
aaeadf0cbd If no "B" parameter given, get 1 byte 2016-05-11 15:30:08 -07:00
Scott Lahteine
a6d594665b Print an error on bad i2c request
Reference: https://github.com/MarlinFirmware/Marlin/pull/3713#issuecomment-218333678
2016-05-11 15:30:02 -07:00
Scott Lahteine
56dd31ea3c Use code_value_long for potentially large values
Addressing #3711
2016-05-10 09:15:31 -07:00
Scott Lahteine
96b71e62c0 Fix dipping on DELTA robots during G29
- Addressing #3689, et. al.
2016-05-08 18:28:46 -07:00
Scott Lahteine
15fc93d742 Cleanup and consolidate probe conditionals for clarity 2016-05-08 12:59:43 -07:00
Scott Lahteine
084f6b5b44 Temperature singleton class 2016-05-04 19:42:12 -07:00
esenapaj
605808fe37 Additional follow-up the PR #3631(Encapsulate S...
Additional follow-up the PR #3631(Encapsulate Stepper, Planner, Endstops in singleton classes)

・Change from abort_on_endstop_hit to stepper.abort_on_endstop_hit in endstop.cpp, Marlin_main.cpp, and ultralcd.cpp
・Add include path to cardreader.h and temperature.h in endstop.cpp(for CardReader class and disable_all_heaters())
It fix compilation error when ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED and SDSUPPORT are enabled.

・Change from digipot_current() to stepper.digipot_current() in Marlin_main.cpp
・Change from digitalPotWrite() to stepper.digitalPotWrite() in Marlin_main.cpp
It fix compilation errors when HAS_DIGIPOTSS is enabled.

・Change from microstep_mode() to stepper.microstep_mode() in Marlin_main.cpp
・Change attribute of microstep_mode() from private to public in stepper.h
・Change from microstep_readings() to stepper.microstep_readings() in Marlin_main.cpp
・Change from microstep_ms() to stepper.microstep_ms() in Marlin_main.
It fix compilation errors when HAS_MICROSTEPS is enabled.
2016-05-03 18:28:37 +09:00
esenapaj
a82cfcff2d Follow-up the PR #3631(Encapsulate Stepper, ...
Follow-up the PR #3631(Encapsulate Stepper, Planner, Endstops in singleton classes)

plan_bed_level_matrix -> planner.bed_level_matrix in multi extruders section of Marlin_main.cpp
It probably fix the Issue #3658(plan_bed_level_matrix not declarate).

movesplanned() -> planner.movesplanned() in ADVANCED_OK section of Marlin_main.cpp
It fix compilation error when ADVANCED_OK is enabled
2016-05-02 22:04:26 +09:00
Scott Lahteine
462a8a951e A little extra gcode_T spacing 2016-04-30 17:26:50 -07:00
Scott Lahteine
96f51f400f Planner singleton class 2016-04-30 17:26:50 -07:00
Scott Lahteine
5076d12344 Localize M119 in Endstops class 2016-04-30 17:26:50 -07:00
Scott Lahteine
5e4e535ce8 Stepper and Endstops as singleton objects 2016-04-30 17:26:50 -07:00
Scott Lahteine
6d3e4e1f8f Prevent stuck M109/M190 when target is changed 2016-04-30 17:03:54 -07:00
Scott Lahteine
c3ef9993b9 Merge pull request #3625 from jbrazio/feature/print-counter
Print job statistics
2016-04-29 15:31:14 -07:00
João Brázio
1491d682fb
Miscellaneous tweaks on PrintCounter 2016-04-29 23:13:59 +01:00
João Brázio
d6cfcc9c8b
Added new G-Code: M78 2016-04-29 23:13:58 +01:00
Scott Lahteine
f4706bb90e Keepalive not needed while waiting for temperatures 2016-04-28 21:11:15 -07:00
Blue-Marlin
e58e281473 Fix feedrate after toolchange
The fix is simple. Most changes are because of changed indendation,
bacause of leaving early for wrong tool number
2016-04-27 00:57:45 +02:00
Scott Lahteine
ec82e1e05d Merge pull request #3616 from thinkyhead/rc_fixup_some_movement
General cleanup around high level move functions
2016-04-25 20:23:38 -07:00
Scott Lahteine
abeab792cb General cleanup around high level move functions
- Use new `DEBUG_POS` macro for `DELTA` debug
- Neaten up `prepare_move` a smidgen
- Remove an old commented `prepare_move()` line
2016-04-25 20:02:24 -07:00
Scott Lahteine
68d0347e67 Call report_current_position after M206 / M428 2016-04-25 18:43:28 -07:00
Scott Lahteine
dcb4cdaa9e Call report_current_position instead of gcode_M114 directly 2016-04-25 18:43:27 -07:00
gralco
840e13f664 Introduce M108 cancel heatup for the hotend and bed
This G-code is asynchronously handled in the get_serial_commands() parser.
2016-04-25 08:33:33 -06:00
João Brázio
a901555da4 Moved G29 debug output before matrix.set_to_identity() 2016-04-22 20:57:22 -07:00
Scott Lahteine
1caa2628da Use sync_plan_position_e function elsewhere 2016-04-20 13:02:19 -07:00
Scott Lahteine
c7df961144 Fix G92 so it only sets the plan position once 2016-04-20 13:01:58 -07:00
Scott Lahteine
3db5a75f30 Merge pull request #3568 from thinkyhead/rc_various_fixes
General code cleanup, improved naming, etc.
2016-04-19 20:53:38 -07:00
Scott Lahteine
ac69fad96d lowercase "stop" function 2016-04-19 19:43:54 -07:00
Scott Lahteine
39ee9c526b setTargetedHotend => get_target_extruder_from_command 2016-04-19 19:43:54 -07:00
Scott Lahteine
cafa8b8ce3 Rename filament runout items 2016-04-19 19:43:39 -07:00
Scott Lahteine
27b2e2e786 Document some variables 2016-04-19 19:43:39 -07:00
Scott Lahteine
a4062a47ac Rename baricuda variables 2016-04-19 19:43:38 -07:00
Scott Lahteine
78747b1328 min_pos/max_pos => sw_endstop_min/sw_endstop_max 2016-04-19 19:43:38 -07:00
Scott Lahteine
ba84d8d091 Allow setting PIDTEMP and PIDTEMPBED together or apart 2016-04-19 18:09:29 -07:00
Scott Lahteine
a26d70e932 Apply indentation to gcode_M303, PID_autotune 2016-04-18 19:04:45 -07:00
Scott Lahteine
ba66336503 Output error for disabled M303 2016-04-18 19:03:45 -07:00
Scott Lahteine
5905ec5ba8 Merge pull request #3541 from thinkyhead/rc_mbl_one_last_lift
Add a final lift, if configured, in Manual Bed Leveling
2016-04-17 17:20:02 -07:00
Jeff K
90c49f5a14 Fixed invalid addressing (overflow) of position_shift / software endstops
Signed-off-by: Jeff K
2016-04-17 19:28:50 -04:00
Scott Lahteine
c242bee449 Add a final lift, if configured, in Manual Bed Leveling 2016-04-17 00:12:46 -07:00
Scott Lahteine
837df6108c Fix borked set_bed_level_equation_lsq 2016-04-16 20:35:42 -07:00
Scott Lahteine
4b75b11a53 Wrap defines in parentheses in configs, M48 2016-04-16 18:21:09 -07:00
Scott Lahteine
234987ee2f Fix MBL lift 2016-04-16 14:17:06 -07:00
Scott Lahteine
e0830bf8f1 Don't use LCD alert unless error or alert level is reset later 2016-04-15 18:48:49 -07:00
Scott Lahteine
a8e4d7c135 Merge pull request #3477 from alephobjects/BedTempHysteresis
Implementation of M190 bed temp hysteresis
2016-04-15 16:20:58 -07:00
esenapaj
5ecd75eeb3 Fix for PR #3502(General cleanup of arc code) 2016-04-16 07:22:07 +09:00
gralco
8ec8d59df8 Use #if TEMP_RESIDENCY_TIME > 0 rather than #ifdef TEMP_RESIDENCY_TIME 2016-04-15 11:20:32 -06:00
Scott Lahteine
6e52b0b723 Merge pull request #3504 from thinkyhead/rc_fix_debugging
Fix debugging of vector_3
2016-04-14 19:08:30 -07:00
Scott Lahteine
88367a37f7 Merge pull request #3227 from thinkyhead/rc_home_offsets_and_limits
Relating current_position, min_pos, max_pos, and home_offset
2016-04-14 18:50:43 -07:00
Scott Lahteine
b20bf1826d Fix debugging of vector_3 2016-04-14 18:45:26 -07:00
Scott Lahteine
b243844690 Merge pull request #3502 from thinkyhead/rc_fix_arcs_bugs
General cleanup of arc code
2016-04-14 18:19:44 -07:00
Scott Lahteine
2129db581e Simplify MBL movement, zigzag 2016-04-14 16:58:42 -07:00
Scott Lahteine
0493fccc0b mbl.active is a bool now 2016-04-14 16:58:42 -07:00
Scott Lahteine
8e5099fa0c Update software endstop positions with M206, M428, G92, etc. 2016-04-14 16:47:22 -07:00
Scott Lahteine
5cfb2533d6 Initial cleaning up of arc code 2016-04-14 16:43:49 -07:00
Scott Lahteine
9ce4264fda Merge pull request #3490 from thinkyhead/rc_mbl_adjustments
Document some movement functions, rename a local
2016-04-13 20:55:20 -07:00
esenapaj
2eb1b102f8 Support for "mechanical probe" with Allen Key as a special case 2016-04-13 20:34:12 -07:00
Scott Lahteine
cfcd3d7b3e Rename z_offset local to zoffset 2016-04-13 20:09:20 -07:00
Scott Lahteine
5fd20ecac3 Comments on some movement functions 2016-04-13 20:09:20 -07:00
Scott Lahteine
a781a6f955 Apply esenapaj 3479 and delta/scara position bugfix 2016-04-13 17:41:20 -07:00
Scott Lahteine
525d8256d4 Merge pull request #3481 from thinkyhead/rc_extruder_offset_array
Fix: gcode_T using non-existent Z offset
2016-04-12 18:23:08 -07:00
Scott Lahteine
46881c846c Add comments for extruder offset options 2016-04-12 17:16:58 -07:00
Scott Lahteine
edf376ce0d Fix: gcode_T using non-existent Z offset
As noted by @snowzach in #3461
2016-04-12 17:15:10 -07:00
gralco
178aeb79c8 Implementation of M190 bed temp hysteresis 2016-04-12 08:56:14 -06:00
Scott Lahteine
0439483bc8 Merge pull request #3476 from thinkyhead/rc_debug_leveling_gcode_t
Add DEBUG_LEVELING output for gcode_T
2016-04-11 21:03:15 -07:00
Scott Lahteine
63d8893f5d Add DEBUG_LEVELING output for gcode_T 2016-04-11 20:45:10 -07:00