MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity
14,677 Commits 1 Branch 0 Tags 129 MiB
32dc874928
Commit Graph

1170 Commits

Author SHA1 Message Date
Marcio Teixeira
274934ad81 Add LULZBOT_TOUCH_UI (#14967) 2019-08-16 18:34:13 -05:00
Marcio Teixeira
179d6c4ed1 Add STARTUP_SCRIPT option. M17 parity with M18. (#14953) 2019-08-14 21:05:15 -05:00
Joseph Bozarth
0fbb26c28f M16 - Expected Printer Check (#14924) 2019-08-13 23:38:45 -05:00
Scott Lahteine
c8e30b6639
Fix code attempting to sprintf %f (#14869) 
Arduino doesn't (always) support `float` formatting in strings. So either cast to `int` or use `dtostrf()` to fix these usages.
 2019-08-08 01:51:37 -05:00
Chris Pepper
f499cecf0d Marlin Binary Protocol Mark II (#14817) 2019-08-05 20:41:53 -05:00
Acenotass
4af9908764 Update M48 command in the status line (#14816) 2019-08-05 20:01:40 -05:00
teemuatlut
d4974ea719 TMC SPI Endstops and Improved Sensorless Homing (#14044) 2019-08-04 22:22:58 -05:00
InsanityAutomation
f59a7e8b07 Print/display ABL current probe point (#14788) 2019-08-01 20:11:26 -05:00
InsanityAutomation
6f8b8c394d Homing backoff per-axis / delta Z (#14789) 2019-07-31 20:50:23 -05:00
Scott Lahteine
c2b319360d Remove extra pragmas 2019-07-30 20:19:47 -05:00
Acenotass
659d06d9b9 M48 menu item, result to status (#14772) 2019-07-30 02:31:14 -05:00
rafaljot
e44fccf3d2 Add support for M575 (#14757) 2019-07-30 02:30:00 -05:00
Scott Lahteine
eae543adf3 Apply HAS_SPI_LCD as needed 2019-07-29 18:55:05 -05:00
Giuliano Zaro
290466578f Adafruit Grand Central M4 (#14749) 2019-07-28 14:48:29 -05:00
Scott Lahteine
17abb94532 Whitespace patch 2019-07-28 01:29:23 -05:00
Ludy
97e9c95f47 Fix & clean up ExtUI (#14748) 2019-07-27 22:44:05 -05:00
Scott Lahteine
a3dc1e461b Update M7219 comment, tweak parameter code 2019-07-24 21:09:51 -05:00
Scott Lahteine
1088846cae Cosmetic updates from 14044 2019-07-24 01:52:36 -05:00
InsanityAutomation
dc6fa04f68 Fix single nozzle temp change, do slower extra prime (#14696) 2019-07-21 19:33:37 -05:00
Tim Moore
e5aa453293 Add support for 2 Neopixel strips (#14667) 2019-07-20 23:14:09 -05:00
Jason Smith
f2c5740d06 Add 'E' argument to G34 to allow stowing between probes (#14533) 
- Use the return value from probe_pt during `G34`
  Eliminate the assumption that probe_pt leaves current_position set to values relative to the probed points. This is not always true, depending on the raise_after argument.
- Add '`E`' argument to `G34` command allowing stowing between each probe.
 2019-07-17 04:23:19 -05:00
InsanityAutomation
b8cc61262f Finish G12, update Nozzle::clean (#14642) 2019-07-17 04:23:19 -05:00
Marcio Teixeira
27c487bab7 Print progress enhancements (#14647) 2019-07-17 03:14:44 -05:00
Scott Lahteine
eaf1c0954e Update some precompiler tests 2019-07-14 13:09:16 -05:00
InsanityAutomation
ce02c6cee2 Variable tool change purge (#14618) 2019-07-14 11:40:58 -05:00
Marcio Teixeira
cbe4bf2ba8 Fix process_injected_command undefined behavior (#14602) 2019-07-14 10:12:48 -05:00
InsanityAutomation
d2f20803ba Allow nozzle clean with limited Axis (#14619) 2019-07-14 06:58:53 -05:00
Robby Candra
e96468566d Fix Z_PROBE_END_SCRIPT in ABL (#14621) 2019-07-14 04:28:38 -05:00
scotthsl
19b24a349c Fix M412 without HOST_ACTION_COMMANDS (#14591) 2019-07-12 04:23:33 -05:00
Scott Lahteine
ed0e6afacb Apply LIMIT macro 2019-07-10 03:35:39 -05:00
Bob Kuhn
dc02d0720d Pins Debugging for STM32 — NEEDS TESTING (#14309) 2019-07-05 22:08:06 -05:00
Scott Lahteine
fe02241044 NONE on combined options 2019-07-05 18:20:24 -05:00
Scott Lahteine
750a16ad38 Fix MIN/MAX function collision with macros 2019-07-05 18:14:02 -05:00
Scott Lahteine
b6546ea33a Add include guards to some headers 2019-07-05 04:02:08 -05:00
Tim Moore
eb6dec03bd Simplify power supply naming logic (#14488) 
Co-Authored-By: Tim Moore <tim.moore@lightbend.com>
Co-Authored-By: AnHardt <github@kitelab.de>
 2019-07-05 01:58:34 -05:00
Scott Lahteine
720bc7c00b
Named indices for Temperature class (#14479) 2019-07-02 08:39:55 -05:00
GMagician
82ecaa767e Remove unused code in M100 
queue.buffer is in bss area, start_free_memory starts from heap then above of bss
 2019-07-01 20:38:49 -05:00
Scott Lahteine
d16954dc88
Make KEEPALIVE_STATE a scoped auto-restore (#14446) 2019-06-29 22:49:50 -05:00
Marcio Teixeira
e6cf7860e8 Improve ExtUI, fix compiler errors, warnings (#14441) 2019-06-29 00:23:57 -05:00
Darsey Litzenberger
946f6bdeaa Disable leveling during G12 (#14385) 2019-06-28 19:23:42 -05:00
Scott Lahteine
4d5a1984e2 Simplified fan handling code 2019-06-28 18:50:32 -05:00
Scott Lahteine
93cd66ac11 Tweaky change from (C) to (c) 2019-06-27 23:58:16 -05:00
Scott Lahteine
d7d80418ae
Singleton for cutting tools (#14429) 2019-06-27 23:06:49 -05:00
Tim Moore
81209f5310 'M105 R' to report redundant temp sensor (#14324) 2019-06-27 21:29:52 -05:00
InsanityAutomation
ce656e2a26 Update G-code injection, sub-commands (#14418) 2019-06-27 15:07:45 -05:00
Scott Lahteine
2580104c8b Revert recent probe changes 
- Revert "Fix FIX_MOUNTED_PROBE compile error (#14393)"
- Revert "Fix G28 with non-BLTouch probes (#14381)"
- Revert "Fix BLTOUCH deploy/stow in HS mode (#14352)"
- Revert "Apply needed BLTouch patch (#14233)"

Co-Authored-By: AnHardt <github@kitelab.de>
 2019-06-26 05:33:43 -05:00
BigIronGuru
9f136a7c67 Low-priority homing in G34 (#14391) 2019-06-26 03:52:01 -05:00
Scott Lahteine
49627069a5 Shorthand for home-after-deactivate 2019-06-26 03:47:55 -05:00
Marcio Teixeira
8e23e9b16c Fix FIX_MOUNTED_PROBE compile error (#14393) 2019-06-25 04:55:29 -05:00
Scott Lahteine
cf762d2c73 Fix enqueueing bug 2019-06-23 23:02:07 -05:00
BigIronGuru
12d21e642f Update G34 for non-BLTouch probes (#14380) 2019-06-23 20:55:43 -05:00
BigIronGuru
5986194c36 Fix G28 with non-BLTouch probes (#14381) 2019-06-23 20:53:05 -05:00
InsanityAutomation
aa0383a83b Enhance IDEX toolchange auto-return w/ no park, full control (#14117) 2019-06-23 20:00:48 -05:00
Scott Lahteine
17778d1c2a Fix M916-918 subcommands 2019-06-22 16:18:42 -05:00
Tanguy Pruvot
be69ec5b32 Fix PLR/M43 warnings (#14333) 2019-06-22 00:48:47 -05:00
BigIronGuru
9c83135d40 Only home Z at the end of G34 (#14353) 2019-06-22 00:43:33 -05:00
LinFor
0f6f5132c1 Fix variable conflict in ok_to_send (#14351) 2019-06-21 19:04:30 -05:00
InsanityAutomation
a9acd2f497 G34 configurable angle limit (#14321) 2019-06-20 21:18:36 -05:00
Scott Lahteine
4df4c47994
Add TMC2209 support (#14249) 2019-06-20 15:47:50 -05:00
Scott Lahteine
4c872a01f2
G-code queue singleton, front injection (#14236) 2019-06-19 00:00:19 -05:00
InsanityAutomation
bf64dd4db6 Improve G34, M422 (Z alignment) (#14142) 2019-06-18 07:02:18 -05:00
Scott Lahteine
3f6424076b Update M524 description 2019-06-18 05:04:55 -05:00
Scott Lahteine
cf3631226b Document G-code M290 2019-06-18 04:53:31 -05:00
Scott Lahteine
903863dcb6 Suppress some warnings 2019-06-15 17:47:59 -05:00
mb300sd
bf8bfb5c66 Add Coolant Control M7/M8/M9 (#10745) 2019-06-13 18:43:11 -05:00
Scott Lahteine
bc2ff9b41f Fix M605 bugs 
Fixes #14191
 2019-06-12 20:01:08 -05:00
Scott Lahteine
04715e04ee Minor M100 cleanup 2019-06-12 06:14:40 -05:00
Scott Lahteine
356410dcfc Move crc16 function to libs 2019-06-12 06:14:39 -05:00
Scott Lahteine
1ef95013f0 Update Marlin.cpp includes, defines 2019-06-11 07:30:51 -05:00
Tanguy Pruvot
8cf5504a34 Redundant but faster recovery.enabled test (#14175) 2019-06-10 23:33:35 -05:00
Scott Lahteine
0ca2073625 ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED => SD_ABORT_ON_ENDSTOP_HIT 2019-06-10 17:28:35 -05:00
Robby Candra
5ca8d51e12 Ability to insert G-code in front of queue (#14229) 2019-06-08 05:23:53 -05:00
Ludy
8e8e48f900 Fix links in templates, gcode.h (#14160) 2019-05-28 21:39:55 -05:00
Minims
32afe1d102 Fix TOOLCHANGE_ZRAISE warning (#14156) 2019-05-27 19:51:29 -05:00
Scott Lahteine
3c179bbd47 Simpler G28 home axis conditions 2019-05-26 16:26:55 -05:00
Scott Lahteine
352734494b Reduce some M43 strings 2019-05-26 16:21:28 -05:00
Scott Lahteine
b14cc0d7c5 Remove extra gcode. prefix 2019-05-26 16:18:45 -05:00
Scott Lahteine
c6d39319de Fix some whitespace 2019-05-26 16:18:43 -05:00
InsanityAutomation
212860f090 Always change to Tool 0 on G29 (#14146) 2019-05-26 14:53:21 -05:00
Bryan
0ef5d667b6 Fixed M43 parameter bug (#14099) 2019-05-25 18:23:25 -05:00
teemuatlut
1c86fbc60b TMC updates, capture LCD changes (#14074) 2019-05-25 18:22:12 -05:00
Scott Lahteine
fc52c43a26 Some documentation updates 2019-05-24 16:30:44 -05:00
Tanguy Pruvot
24b1818245 Secure STM32F1 servo code and M280 detach (#14085) 2019-05-22 16:57:19 -05:00
Scott Lahteine
aeec9ef76b Update backlash code 2019-05-20 21:34:08 -05:00
Tanguy Pruvot
87e7193259 Fix M226 sign warning (for most platforms) (#14049) 2019-05-18 16:15:48 -05:00
FanDjango
85fb33a060 BLTOUCH tweaks, new v3.1 command (#14015) 2019-05-17 19:10:18 -05:00
Scott Lahteine
785c01f2bc Use US spelling of 'behavior' 2019-05-15 01:49:17 -05:00
Sam Lane
7f1e0c5670 Update EXTRA_LINADV_K with Marlin bit macros (#13993) 2019-05-15 01:07:07 -05:00
Robby Candra
7b78a20fb7 Fix: Debug Memory Dump size (#13957) 
* Fix Memory Dump size

* Fix Compile error on Memory Dump
 2019-05-11 11:44:39 -05:00
Giuliano Zaro
f22c9a1ae1 Fix G-code parser with MMU2 (#13951) 2019-05-10 19:57:15 -05:00
Bob Kuhn
fa3739aa23 M100: LPC1768 and DUE compatibility (#13962) 2019-05-09 21:57:44 -05:00
Scott Lahteine
ad4ffa1d2f
Use C++ language supported 'nullptr' (#13944) 2019-05-09 11:45:55 -05:00
InsanityAutomation
6811e2921b BLTouch v3 / 3DTouch Interoperability & performance (#13814) 2019-05-07 21:25:54 -05:00
Ludy
a504366138 Fix probe fan compiling error (#13930) 2019-05-07 14:14:12 -05:00
Stephan
483822f3aa Fix some THERMAL_PROTECTION_CHAMBER issues (#13678) 2019-05-06 19:55:01 -05:00
doggyfan
23a8707ef1 Configurable Thermistor (#13888) 2019-05-06 18:51:06 -05:00
Ludy
f96eaad1ea Unused variable cleanup (#13917) 2019-05-05 22:01:04 -05:00
Giuliano Zaro
e2a77ed881 Bring chamber temp to completion (#13837) 2019-05-04 22:51:47 -05:00
Marcio Teixeira
15357af67c Backlash cleanup (#13659) 
…And save backlash, fil. sensor, ExtUI userdata to EEPROM.
 2019-05-03 23:53:15 -05:00
Robby Candra
c369477cb0 Fix bug: diveToFile breaks M23 (#13865) 2019-05-02 15:54:24 -05:00
Thomas Moore
ee243e4edf Fix mixing extruder filament change (#13803) 2019-05-01 21:55:58 -05:00
InsanityAutomation
610fb46683 Fix some ExtUI issues (#13799) 2019-04-26 09:32:01 +02:00
Bob-the-Kuhn
73726d56b3 Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x 2019-04-25 12:06:01 -05:00
Scott Lahteine
5051909c3c
Update do_select_screen for general use (#13800) 2019-04-24 10:13:44 -05:00
Giuliano Zaro
e2dd2268e8 Add a Z raise-between-probes to G34 (#13791) 2019-04-23 13:40:55 -05:00
Scott Lahteine
0c4d3e6622 Improve M906 description 2019-04-22 13:48:02 -05:00
Bob-the-Kuhn
520585c5ed Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x 2019-04-17 15:34:29 -05:00
Scott Lahteine
92ed9a2bb6 Fix is_M29 
Followup for #13013
 2019-04-15 23:47:06 -05:00
Scott Lahteine
9992c424f5 Patch G92.9 flags 
Followup to #13703
 2019-04-15 20:26:40 -05:00
Msq001
455ee23499 Fix, improve Power Loss Recovery (#13703) 
- Save and restore workspace offsets
- Add retract and purge (hidden) options
- Always restore axis relative modes
- Use added `G92.9` to do position restores
 2019-04-15 18:53:39 -05:00
InsanityAutomation
aa0f7afbe6 Fix call to uninitialized PWM pin, heater 2 overlap (#13674) 2019-04-15 15:57:34 -05:00
Bob-the-Kuhn
9dd4252b39 Merge branch 'bugfix-2.0.x' of https://github.com/MarlinFirmware/Marlin into bugfix-2.0.x 2019-04-12 22:07:12 -05:00
Scott Lahteine
7e58d33a2e Update some headers 2019-04-12 13:04:04 -05:00
Jamie
509dc283f2 Restore declarations of G53-G59 (#13654) 2019-04-11 13:51:05 -05:00
InsanityAutomation
4900c28bf6 Fix IDEX tool-change, and more (#13614) 2019-04-09 18:33:40 -05:00
Scott Lahteine
5e38d70697 Fix M217 report label, general cleanup 2019-04-08 18:18:08 -05:00
Scott Lahteine
fae2b7edc3 Update MMU2 code style 2019-04-08 18:13:42 -05:00
Scott Lahteine
c8a83fb122 SPINDLE_LASER_ENABLE => SPINDLE_LASER_ENA 2019-04-08 18:13:41 -05:00
Bob Kuhn
9a56d90150 Fix M43 on LPC176x (#13587) 
The real fix. PR #13568 was wrong.
 2019-04-06 18:06:07 -05:00
Roxy-3D
9cee81d47e Option to show babysteps total since G28 (#13580) 2019-04-06 18:04:34 -05:00
Scott Lahteine
cf12fc8366
Expand on serial debugging (#13577) 2019-04-05 20:02:46 -05:00
Marcio Teixeira
bf7b28b456 Fix incorrect variable name (#13585) 2019-04-05 19:04:46 -05:00
Scott Lahteine
cacec5764a Clean up whitespace 2019-04-04 22:12:02 -05:00
Marcio Teixeira
27a4927ed1 Add option to move away from endstop after homing. (#13557) 
Add option to move away from endstop after homing.
- Add `ENDSTOP_BACKOFF` for printers with a recessed Z home button (Lulzbot TAZ 6).
- Also prevents chattering when sensorless homing with axes against bumpers.
 2019-04-04 02:47:19 -05:00
Scott Lahteine
af92ee9dd6 No PLR include needed in queue.cpp 2019-04-03 18:26:31 -05:00
Scott Lahteine
2aa35e95af More G26 arc cleanup 
Followup to #13531
 2019-04-03 16:03:21 -05:00
Scott Lahteine
a0a5c31c05
Power-Loss initialization fix (#13553) 
- Only save to PLR file on moves with E and X or Y
- Save to PLR after any long-ish Z downward move
 2019-04-01 17:52:45 -05:00
InsanityAutomation
fbc7b51a24 Use NO_FETCH for Dual X G28 (#13539) 2019-04-01 17:48:21 -05:00
InsanityAutomation
4961d8aa3e Update G28.cpp (#13539) 2019-03-31 19:50:40 -05:00
ManuelMcLure
04086fc455 Minor optimization to ARC_SUPPORT code (#13531) 2019-03-30 22:29:37 -05:00
Robby Candra
a3f67acd6d Fix Power Loss Recovery file delete (#13522) 2019-03-30 13:14:58 -05:00
Marcio Teixeira
5679fae11e UltraLCD enhancements (lower fan resolution, backlash menu) (#13519) 2019-03-29 14:07:43 -05:00
Marcio Teixeira
c6466c23fe Silence signed/unsigned comparison warning. (#13508) 2019-03-29 13:33:45 -05:00
InsanityAutomation
7240e3a68f Allow G26 with no heated bed (#13511) 2019-03-29 13:32:43 -05:00
Sam Lane
e3ab54753b Add extra Linear Advance factors (#13490) 2019-03-26 04:02:27 -05:00
Thomas Moore
263f8edff8 Disable volumetric extrusion during G26 (#13479) 2019-03-25 22:41:52 -05:00
Chris Pepper
aacc1148b0 Fix M106 for index > extruders (#13473) 2019-03-24 20:03:53 -05:00
7eggert
d96f7d6068 Minimum segments for G2/G3. Better for small arcs. (#13466) 2019-03-24 19:53:47 -05:00
Sam Lane
a8fa275dc6 Fix Fan 0 responding to all fan speeds (#13444) 2019-03-23 23:00:31 -05:00
InsanityAutomation
5b2c37d6c1 Followup to BLTouch (#13422) 2019-03-18 16:31:11 -05:00
InsanityAutomation
3fb8489ae3 EXTUI and UBL compilation fixes (#13420) 2019-03-17 07:57:54 -05:00
Scott Lahteine
b376c7e374 Group DISABLED items 2019-03-17 07:56:35 -05:00
InsanityAutomation
691e5c3bb8 BLTouch V3.0 support (#13406) 2019-03-17 05:57:25 -05:00
Scott Lahteine
49cf92dc36
Extended condition macros (#13419) 
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
 2019-03-16 23:43:06 -05:00
InsanityAutomation
09eb30dc05 IDEX Mirror mode based on Formbot / Vivedino Symmetric mode (#13404) 2019-03-15 22:46:27 -05:00
Scott Lahteine
9a515cbd32
Fix Pause Print message and behavior (#13394) 2019-03-14 02:26:07 -05:00
Scott Lahteine
f5bcc00570
Unify debugging output with debug_out.h (#13388) 2019-03-14 02:25:42 -05:00
Andrei Pozolotin
cc8a871705 Add capability string CHAMBER_TEMPERATURE (#13391) 
Reference: #13380
 2019-03-13 18:09:22 -05:00
Scott Lahteine
67bee06e43 No patch needed for non-libmaple analogWrite 
See https://github.com/pinchies/Marlin/pull/1#issuecomment-471388743
 2019-03-13 07:21:10 -05:00
Scott Lahteine
f89b375fb9
Fixes and improvements for PWM pins (#13383) 2019-03-13 06:51:15 -05:00
Scott Lahteine
87162658c4
Fix and improve software endstops (#13386) 2019-03-13 05:48:36 -05:00
InsanityAutomation
c03df89921 ExtUI Mesh Leveling Extensions (#13363) 2019-03-13 00:45:52 -05:00
InsanityAutomation
050eac03af Single X Duplication Extension (#13373) 
* Multi-nozzle selective duplication
* Use a bit-mask, reduce stepper_indirection.h size
* Tweak the multi-nozzle duplication description
* Use 'S' as a bool in M605
* Add HAS_DUPLICATION_MODE conditional
* Remove '_MODE' from the option name
* M605 in the style of Stacker M280
* Also include direct mask style (P)
 2019-03-13 00:42:50 -05:00
Scott Lahteine
d63da4592d Tweak to SCARA_move_to_cal 2019-03-12 22:06:50 -05:00
Scott Lahteine
d94e077901 Apply HAS_HOTEND_OFFSET where needed 2019-03-11 20:58:27 -05:00
Scott Lahteine
e52bcc9408 Limit top bed temp to BED_MAXTEMP - 10 
The chances of a 10° overshoot is pretty minimal.
 2019-03-11 16:32:34 -05:00
Michiel Baird
b824a517aa Add G38.4 and G38.5 (#13348) 2019-03-10 17:22:09 -05:00
Tobias Frost
60e82e3929 Send notifications to ExtUI for M0/M1 (#13344) 
- Send notifications to ExtUI for M0/M1

- wait_for_user can be non-volatile (not changed by interrupt)
  C / C++ compilers don't optimize away reads of non-volatile variables when a function call is used between accesses, because *any* variable could be changed by the function call. Since `wait_for_user` can't be changed without a function call, it should be non-volatile so the compiler can optimize away cases where it is read more than once without an intervening function call.
 2019-03-09 14:20:37 -06:00
Marcio Teixeira
00fc43144a Follow up fixes to various PRs. (#13334) 
- Ensure `MarlinUI:get_progress` is defined for `ExtUI`.
- Fix for `BACKLASH_SMOOTHING` with small segments.
  `BACKLASH_SMOOTHING` with extremely small segments failed to fully correct due to the correction factor being rounded down. Rounding up ensures the entire backlash will converge to zero even for small segments.
- Add pinout for the beta revision `EINSY_RETRO`.
- Update soft endstops with tool offsets (for toolchange et. al. move clamping) (#12568)
 2019-03-09 14:20:37 -06:00
InsanityAutomation
d54741eda8 Update some G26 plausible values. Add speed control. (#13330) 2019-03-08 03:13:44 -06:00
3dlabsio
645ca7af7a M141 Heated Chamber, Temperature rework (#12201) 2019-03-07 02:09:39 -06:00
Scott Lahteine
cfdb38eda4
Allow SERIAL_ECHOPAIR to take up to 12 pairs (#13311) 2019-03-05 06:46:19 -06:00
Scott Lahteine
2e5a3b01fd Save Power Loss Recovery only on move commands 2019-03-05 02:43:29 -06:00
Scott Lahteine
2212da453a
Distinguish between analog/digital auto fans (#13298) 2019-03-05 00:41:31 -06:00
Chris Pepper
2513f6b550
Fix multiport G28 with Binary Transfer (#13308) 2019-03-04 16:44:54 +00:00
Scott Lahteine
35ae5daf2d Split up sdcard G-codes 2019-03-03 01:52:15 -06:00
Scott Lahteine
3f36a38512 Clean up some pre-serial-redirect includes 2019-03-03 01:52:15 -06:00
Scott Lahteine
edc4e037c4 Add a note to G10 2019-03-02 17:19:36 -06:00
Chris Pepper
b0553d2d97 Add M997 support and simple implementation for LPC176x (#13281) 2019-03-01 20:11:50 -06:00
Scott Lahteine
2f1e1dcb42 Gradual step towards EXTRUDERS 0 support 2019-03-01 01:51:24 -06:00
Scott Lahteine
99d0022fae
Drop the Z_MIN_PROBE_ENDSTOP option (#13276) 2019-03-01 00:27:45 -06:00
Chris Pepper
7de6476b3d
Fix binary protocol error 2019-02-28 02:31:42 +00:00
Scott Lahteine
2c10222e87 card.transfer_port => transfer_port_index 2019-02-27 20:14:17 -06:00
Chris Pepper
4ab433d391 Fix binary protocol with one serial port (#13270) 
- The `sdcard.transfer_port` variable is Marlin's internal serial port index, not the physical serial port number.
- Added packet number to "ok" response so hosts don't need to wait for the ACK.
- Renamed feature to `BINARY_FILE_TRANSFER`, as the speed up is only consequential to the ability to transfer binaries over serial.
 2019-02-27 19:57:48 -06:00
Bob Kuhn
ddbe4cfa20 Printrboard G2 support (#13116) 2019-02-26 21:03:13 -06:00
Scott Lahteine
5d28575d4d Clean up some motion code 2019-02-25 16:01:42 -06:00
Scott Lahteine
808b076000 Update some ABL/UBL conditionals 2019-02-25 16:01:42 -06:00
Scott Lahteine
64253e1a58 Followup to serial reform 
Reference #13250
 2019-02-25 00:20:36 -06:00
Minims
92a4984066 Fix G34 probe position (#13251) 2019-02-24 13:57:30 -06:00
Scott Lahteine
e15354e387
Simplify serial port redirect (#13234) 2019-02-23 22:53:01 -06:00
Bruce j Beare
562f2321d2 Fix a G34 bug, allow negative Z corrections (#13240) 2019-02-23 02:41:52 -06:00
Marcio Teixeira
109e67169c Define G21 as NOOP w/o INCH_MODE_SUPPORT (#13229) 
Ticket #13228

If `INCH_MODE_SUPPORT` is undefined, G20 is an unknown command as it should be (Marlin is, by default, operating in metric mode). G21, however, is found in many slicers and printer start gcode sections and should be accepted (as a NOOP) to avoid the unknown commands.
 2019-02-22 15:35:32 -06:00
Scott Lahteine
80359c9937 Add more parameters to M240 
Co-Authored-By: shitcreek <45380455+shitcreek@users.noreply.github.com>
 2019-02-20 14:51:36 -06:00
Scott Lahteine
89bbc30a09 Fix init of power supply pin 
Fix #13184
 2019-02-20 05:29:05 -06:00
LinFor
ba39186364 TMC_DEBUG optimization and improvements (#13135) 2019-02-20 02:22:42 -06:00
Scott Lahteine
3a1b6fe8c1 Coding standards 2019-02-19 14:58:39 -06:00
InsanityAutomation
19af90face Fix a host action compile error (#13208) 2019-02-19 14:47:31 -06:00
Scott Lahteine
e00aad84af Add M240 parameters D I J R S 2019-02-14 20:00:40 -06:00
Marcio Teixeira
31c240a8db Enhancements to G425 (#13159) 
- Turn off bed leveling prior to calibrating.
    - This prevents lateral probes from having a Z component that
      triggers the Z endstop and causes the motion to be aborted.
- Got rid of static const float arrays "dimension" and "true_center"
    - Frees up 24 bytes of SRAM
- Changed incorrect use of "bool" for float in backlash macros.
    - Replaced arguments with 0.0f and 1.0f for clarity.
- Now only disables soft endstops (since calibration cube is outside of bed)
    - Not necessary to disable global endstops
 2019-02-14 16:45:31 -06:00
Scott Lahteine
ab2816c870 Patch for M240 2019-02-14 15:13:57 -06:00
Scott Lahteine
d2bdb71c13
Add PHOTO_GCODE option, photo trigger physical move (#13168) 2019-02-14 15:09:35 -06:00
Scott Lahteine
be9a409980 Fix M125 XY parameters, export get_homing_bump_feedrate 2019-02-14 05:25:46 -06:00
Scott Lahteine
ce40c2e87c Use do_blocking_move_to(ref, fr) 2019-02-14 02:22:08 -06:00
Scott Lahteine
7cf9b93f26 Add HAS_FILAMENT_SENSOR ahead of 12962 2019-02-12 20:13:20 -06:00
revilor
e56c13670d Service interval watchdog (#13105) 2019-02-12 15:58:56 -06:00
InsanityAutomation
7f1b69b0c8 Add HOST_PROMPT_SUPPORT (#13039) 2019-02-12 15:55:47 -06:00
Scott Lahteine
0feeef2604 Update copyright in headers 2019-02-12 15:30:11 -06:00
Scott Lahteine
894f5c24a8 Fix trailing whitespace 2019-02-12 14:25:57 -06:00
Roman Moravčík
bace52afd7 Fixed compilation with MMU2_MENUS disabled (#13140) 2019-02-12 12:55:49 -06:00
Scott Lahteine
9737608f0a Enable gradient when alias is cleared 2019-02-10 06:39:12 -06:00
Scott Lahteine
6de3d34378
M166 Gradients, LCD Menu for 2-channel Mixer (Geeetech A10M/A20M) (#13022) 2019-02-10 04:54:23 -06:00
AnHardt
0e37fe8776 Apply minimum C in M303 (#13113) 
Apply minimum `C` in `M303`. `PID_autotune()` needs to be called with a 'C'ycles-parameter >2 to give meaningful (different from 0) PID-factors. Therefore silently raise C to 3. Fixing one aspect of #13104
 2019-02-10 03:54:45 -06:00
Scott Lahteine
f269766408 Put the MMU2 menu with the others 2019-02-06 17:38:46 -06:00
Marcio Teixeira
e1604198ff G425 — Auto-calibrate Backlash and Nozzle Offsets (#13050) 2019-02-06 17:20:17 -06:00
Mark Zachmann
19cf72e057 Support individual solenoid disable with M381 (#13008) 2019-02-06 06:34:53 -06:00
teemuatlut
d81342254a Support new TMC drivers (#13026) 2019-02-06 06:33:14 -06:00
Rolf Werum
524c6c10bf MAGNETIC_PARKING_EXTRUDER (#12351) 2019-02-06 06:30:53 -06:00
Scott Lahteine
1bd9a63049 Add HAS_EXTRA_ENDSTOPS macro 2019-02-06 05:10:05 -06:00
Scott Lahteine
1497fb388a
M29 match logic was reversed (#13013) 
* M29 logic was reversed 

If in card-saving mode generate errors line errors for anything that's *NOT* "M29 ?"

* Update queue.cpp

* Update queue.cpp
 2019-02-04 07:23:42 -06:00
Scott Lahteine
b5fd2fb58b Allow M29 to be processed late 2019-02-04 07:23:02 -06:00
Scott Lahteine
c03bac9ad4
Update queue.cpp 2019-02-04 07:17:40 -06:00
Scott Lahteine
a49f0205ea
Update queue.cpp 2019-02-04 07:11:08 -06:00
jeffstaley
2f176d6fb8 Flush RX buffer on G-code line errors to prevent hang (#13018) 2019-02-04 06:03:49 -06:00
Scott Lahteine
4200bd2fc1
Report on M92 with no arguments (#12833) 2019-02-04 05:24:15 -06:00
Scott Lahteine
433518de74 Prevent M420 error from disconnecting OctoPrint 
Just echo the error instead of labeling it `Error:`.
 2019-02-04 01:54:43 -06:00
Scott Lahteine
4fa1c52688 Tweak serial output code 2019-02-03 01:09:14 -06:00
Scott Lahteine
a5e3384691 Pre-apply cosmetic changes to mixing 2019-02-03 01:09:14 -06:00
mattfredwill
c3cb449990 TMC2130 dual-stepper Sensorless Homing (#13061) 2019-02-01 18:09:01 -06:00
revilor
6a57d0b381 Prusa MMU2 (#12967) 2019-01-31 19:10:52 -06:00
InsanityAutomation
a1d03fe7ba Fix single nozzle fan (#13038) 2019-01-30 20:54:04 -06:00
Scott Lahteine
97da6c1da5 Use MIN/MAX for min/max 2019-01-28 20:36:13 -06:00
Giuliano Zaro
a79d80c78e Minor cleanup of pause code (#13030) 2019-01-27 23:10:25 -06:00
InsanityAutomation
48a3502656 Remote streamer improvements (#12982) 2019-01-27 22:43:13 -06:00
jeffstaley
3f91233f6d
M29 logic was reversed 
If in card-saving mode generate errors line errors for anything that's *NOT* "M29 ?"
 2019-01-25 07:36:52 -08:00
jeffstaley
0e0cc13650 Fix M29 for Pronterface SD card upload (#13010) 2019-01-24 21:10:59 -06:00
Scott Lahteine
8f9b246d0e Tweak some formatting, replace tabs 2019-01-24 13:18:56 -06:00
Bob Kuhn
2f35747f29 L6470 SPI daisy chain support (#12895) 2019-01-23 19:06:54 -06:00
Scott Lahteine
6453b82a5e Clean up trailing whitespace 2019-01-23 15:57:01 -06:00
InsanityAutomation
a1cf49935d Add laser control menu (#12883) 2019-01-20 23:41:47 -06:00
InsanityAutomation
75f2665f2e LCD SD Card items near top when not using wheel (#12926) 2019-01-20 23:24:53 -06:00
Scott Lahteine
0495fcd475 Minor spacing fix 2019-01-20 00:10:50 -06:00
Ludy
acf266fe78 Fix a compile warning, etc. (#12955) 2019-01-19 18:47:29 -06:00
Scott Lahteine
ce563d7c2e Various general cleanups 
Mostly from the L6470-oriented PR
 2019-01-19 16:56:12 -06:00
teemuatlut
e6805582a6 M569 to change stepping mode. Add new TMC section to LCD. (#12884) 2019-01-17 13:17:16 -06:00
Marcio Teixeira
f11c6d5d02 Fix M107 when dual-nozzles share fan (#12819) (#12909) 2019-01-15 18:45:18 -06:00
InsanityAutomation
59b18aaeef Allow resume from pause with parking enabled (#12893) 
Currently, Pause of an SD-Memory card print does not work.    This has been verified to resolve the issue by multiple people.   

I understand more work needs to be done to resolve some of the concerns...
 2019-01-15 07:58:54 -07:00
Giuliano Zaro
85f149befe Save some progmem (#12913) 2019-01-14 20:56:30 -06:00
teemuatlut
1a79878dff Remove TMC_Z_CALIBRATION in favor of Z_STEPPER_AUTO_ALIGN 2019-01-12 18:07:28 -06:00
Scott Lahteine
7cfce20cd3 Update comments on M125 2019-01-12 17:52:44 -06:00
InsanityAutomation
ed3ab5e212 Fix M24 not starting new job (#12887) 2019-01-12 15:30:44 -06:00
InsanityAutomation
082f6a27de ADAPTIVE_FAN_SLOWING extension to hotend thermal protection (#12853) 2019-01-12 00:41:48 -06:00
InsanityAutomation
a403d9a50c Improve menu pause / resume (#12876) 2019-01-11 20:42:11 -06:00
Scott Lahteine
fb8111553e getStatus => report_status 2019-01-11 19:51:00 -06:00
Giuliano Zaro
709a6356f7 Remove obsolete test conditions (#12829) 2019-01-05 14:02:45 -06:00
Luu Lac
bcf347403b Fix M106 extruder & fan count (#12820) 2019-01-05 14:01:35 -06:00
Marcio Teixeira
81e753064a Fix ExtUI compile warnings and error (#12799) 2019-01-03 08:36:43 -06:00
Ludy
14a7faf087 Fix compile warning comparison uint and int (#12788) 2019-01-01 18:20:12 -06:00
Marcio Teixeira
60cb36bef3 Misc. improvements (#12747) 
* Make ExtUI respect MAXTEMP limits
  - Temperatures are now clamped by MAXTEMP limits rather than arbitrary values.
* Speed up USB init, add status
  - Speed up USB initialization
  - Show status message if init failed
* Enable status messages for EXTENSIBLE_UI
* Adjust max limit to MAX_TEMP - 15
* Misc. tweaks to formatting, const, etc.
 2019-01-01 15:17:48 -06:00
InsanityAutomation
4f2473053c Fix M106 with SINGLENOZZLE 2018-12-31 20:10:18 -06:00
Ludy
814d93c7cf Fix G33 sprintf output warning (#12738) 2018-12-27 18:05:42 -06:00
InsanityAutomation
530ef5846f Make nomove=false for toolchange on filament swap (#12739) 2018-12-27 11:38:35 -06:00
Luc Van Daele
c6e09c2689 [2.0.x] G33 clean up (#12648) 
Remove obsolete workarounds in G33 for the now fixed zprobe_zoffset bug
 2018-12-18 12:43:38 -06:00
Marcio Teixeira
902d5b0f8b Allow ExtUI to use LCD_SET_PROGRESS_MANUALLY (#12628) 2018-12-12 17:21:37 -06:00
teemuatlut
55144284c2 TMC connection test, spreadCycle parameters, improved debugging (#12616) 2018-12-09 20:54:48 -06:00
MasterPIC
3bb8b3529a Center ABL grid on bed with H parameter. (#12610) 2018-12-09 11:24:48 -06:00
Marcio Teixeira
b22716e938 M425 Backlash Correction (#11061) 2018-12-08 14:36:46 -06:00
Scott Lahteine
b7e38ea249 Signal an invalid mesh for M420 enable / load 2018-12-07 16:14:11 -06:00
teemuatlut
50b2fbd031 Trinamic: Split stealthChop, improve driver monitoring, etc. (#12582) 2018-12-07 15:34:21 -06:00
Scott Lahteine
261c6f4b96 Fix pause/resume SD print 
Followup to #12551, addressing #12566
 2018-11-30 19:23:08 -06:00
Scott Lahteine
aaf862aef2
Fix angles for disabled EDITABLE_SERVO_ANGLES (#12559) 2018-11-30 12:31:42 -06:00
Scott Lahteine
c986239837
A single SERIAL_ECHO macro type (#12557) 2018-11-29 16:58:58 -06:00
Scott Lahteine
03ef2d6c82
Fix "paused" message and M125 called by M25 (#12551) 2018-11-28 19:28:31 -06:00
Scott Lahteine
5b24ce9024 Hide M217 compile warning 2018-11-26 16:52:16 -06:00
Scott Lahteine
1fcc13b011 Allow Serial Overrun Protection to be disabled 2018-11-23 21:07:38 -06:00
Scott Lahteine
d29cb09b3e Fix a minor compile warning 2018-11-22 05:35:38 -06:00
Scott Lahteine
817a37169a Apply/unapply const here and there 2018-11-20 06:44:21 -06:00
Scott Lahteine
a4c15dc54f
Modify MBL to use IJ instead of XY (#12478) 2018-11-19 09:08:15 -06:00
kAdonis
4ae9a06c60 Update M303.cpp (#12471) 2018-11-18 18:04:51 -06:00
Marcio Teixeira
c1e17037e5 Various fixes for MarlinUI and ExtUI (#12439) 2018-11-17 22:21:44 -06:00
Giuliano Zaro
43ecdb606f Fix a compile warning (#12452) 2018-11-17 07:08:25 -06:00
Ludy
56a94c2a26 Use 'target_extruder' in M104 as with M109 (#12448) 2018-11-17 06:55:25 -06:00
Scott Lahteine
66580f32c2
Make CardReader class static (#12451) 
* Make CardReader a static class
* Make CardReader flags into bitfields
 2018-11-16 22:39:16 -06:00
Scott Lahteine
d97e31db4c
Optimize Power-Loss Recovery (#12440) 2018-11-16 20:47:07 -06:00
Scott Lahteine
0e610815e4 No need for Cap:PAREN_COMMENTS 2018-11-16 04:28:40 -06:00
Scott Lahteine
7a075a5dc9 Tweak extruder errors 2018-11-16 01:32:21 -06:00
Scott Lahteine
2d92f333f5 Fix GcodeSuite::T active_extruder reference 2018-11-15 14:07:24 -06:00
Scott Lahteine
d2bb53702a
Optimize target_extruder, ignore T with mixing (#12432) 
* Optimize target_extruder, ignore T with mixing
* Give G-code Tn parity with tool_change
 2018-11-14 17:33:04 -06:00
Scott Lahteine
d82c350de7
Miscellaneous LCD code renaming, reordering (#12430) 
* Move special characters to language.h
* Apply some naming standards
* Clean up menu item draw functions
* Rename some Temperature methods
* UI => ExtUI
 2018-11-14 13:13:51 -06:00
Scott Lahteine
54ec5528a0 hasstatus => has_status 2018-11-14 01:34:28 -06:00
Roxy-3D
cda5ef08fa
Debug of G2-G3 for UBL (#12386) 
Changes only affect UBL.  Everything else is left alone.
 2018-11-13 11:20:21 -06:00
Scott Lahteine
143b2896e0
Add M412 to enable/disable filament runout detection (#12406) 2018-11-12 21:29:46 -06:00
Scott Lahteine
a163c89c6a Followup to 50af1d1 2018-11-12 20:31:53 -06:00
Scott Lahteine
50af1d1e08 Differentiate translated On/Off from Serial ON/OFF 2018-11-12 17:23:08 -06:00
Scott Lahteine
da17f8ad37 For now (!) don't synchronize in M204 and M205 
See if this has any deleterious effect on motion planning by slicers that inser their own jerk and acceleration controls. The problem I see is that these settings can take effect on blocks already in the planner, and the only way around this would be to shadow these settings in planner blocks and use the shadowed settings in the planner.
 2018-11-12 02:43:24 -06:00
Scott Lahteine
a0c795b097
Encapsulate common display code in a singleton (#12395) 
* Encapsulate common LCD code in a singleton
* Depend more UBL code on UBL_DEVEL_DEBUGGING
  - Since most users don't need the debugging on at all times, this helps reduce the default build size for UBL by over 2K, a little closer to fitting on 128K boards.
 2018-11-11 12:16:24 -06:00
Scott Lahteine
471f403a67 Reduce code size with plain inlines 2018-11-11 08:36:10 -06:00
Scott Lahteine
6093df11dc
Allow G26 to use the active extruder (#12387) 
* Make lcd_quick_feedback argument optional
* Add click_to_cancel option to wait_for_hotend/bed
* Have G26 use the active nozzle and wait_for_hotend/bed
* Use wait_for_release in UBL G29
* Add 'T' parameter to G26 for an initial tool-change
 2018-11-10 18:07:38 -06:00
Scott Lahteine
bed15fcd81 Tweak 'echo_not_entered' used by MBL's G29 2018-11-10 01:32:51 -06:00
Scott Lahteine
78ccedd6a8 Fix M91x sanity-check to permit TMC2660 
Fix #12362
 2018-11-09 05:48:15 -06:00
revilor
b60abc7c37 [2.0.x] Macro G-codes (#9365) 2018-11-09 05:25:08 -06:00
InsanityAutomation
6471a75a22 Combine more tool-change variables (#12137) 2018-11-06 22:22:20 -06:00
Scott Lahteine
812f6a7dd7 Fix Resume from SD Pause 
In reference to https://github.com/MarlinFirmware/Marlin/pull/12098#issuecomment-436231690
 2018-11-06 21:09:37 -06:00
Scott Lahteine
488a17b3f5 Use IS_SD_PRINTING() more 2018-11-06 20:55:17 -06:00
Marcio Teixeira
4dbaa6369f Fix const pointer assignment compile error (#12350) 2018-11-06 19:49:39 -06:00
Scott Lahteine
e574f01568
More advanced pause tweaks (#12356) 
* Followup to LCD_TIMEOUT_TO_STATUS=0
* Make continuous purge screen fit 20x4
* Unify purge message modes
* Preserve last-set pause header mode
 2018-11-06 19:25:57 -06:00
Scott Lahteine
4c5ca89d8c
Show the appropriate pause message (#12348) 2018-11-06 04:13:48 -06:00
Scott Lahteine
b3b4e6dc45
Change Marlin debug flag names to fix conflicts (#12340) 
In reference to #11000
 2018-11-05 22:48:28 -06:00
Scott Lahteine
04f173790f Remove trailing whitespace 2018-11-05 22:38:20 -06:00
Scott Lahteine
486f2a66a9 Fix MBL XY parameter error messages 
Fix #11522
 2018-11-05 04:17:37 -06:00
Scott Lahteine
2613ddf61c Fix "circle" 2018-11-05 04:17:37 -06:00
Scott Lahteine
427bc64ba1 G28 O respects HOME_AFTER_DEACTIVATE 
Addressing #11271
 2018-11-05 04:17:37 -06:00
Scott Lahteine
498dfa291e Update and fix CHDK 2018-11-05 04:17:37 -06:00
Scott Lahteine
3cbc3ecdd7 Fix 'M43 T' to use 'L' as last pin 
- The documentation is correct. The code was wrong.
 2018-11-05 04:17:37 -06:00
Scott Lahteine
07a0822ebe M420 support in MARLIN_DEV_MODE 2018-11-04 20:54:38 -06:00
Scott Lahteine
44fa7fb18c Cleanups for leveling-related code 2018-11-04 19:07:47 -06:00
Scott Lahteine
cc2bc67440 ENABLED(NEWPANEL) => HAS_LCD_MENU 2018-11-04 19:06:10 -06:00
Scott Lahteine
f5eab912ed
Apply #pragma once, misc cleanup (#12322) 
* Apply #pragma once in headers
* Adjust some thermistors formatting
* Misc cleanup and formatting
 2018-11-04 02:25:55 -06:00
Scott Lahteine
d1ff22b983 Revive SCARA's home offset (unimplemented) 2018-11-03 06:24:41 -05:00
Scott Lahteine
e4cf175163
Synchronize on M204, M205 (#12302) 
* Add parser.seen for multiple parameters
* Fix M666, use !seen for report
* Synchronize on M204, M205
 2018-11-03 01:16:37 -05:00
Ludy
5ba6607181 Fix keypad-related compile error (#12306) 2018-11-02 22:29:32 -05:00
Scott Lahteine
3eb9838dca Simplify TMC sanity-checks 2018-11-02 01:15:49 -05:00
Scott Lahteine
31c28d0dd2
Drop pgm_read_*_near and let headers choose (#12301) 
- Drop `pgm_read_*_near` and let headers choose.
- Define `USE_EXECUTE_COMMANDS_IMMEDIATE` as a conditional.
- Add `process_subcommands_now` for SRAM-based commands.
 2018-11-02 00:42:16 -05:00
Ludy
9f77df2590 Followup to menu refactor. TMC warnings, sanity. (#12288) 
- Followup fixes for menu refactor
- Fix TMC sanity checks, unused var warnings
 2018-11-01 16:13:33 -05:00
Scott Lahteine
42f8b6c530
Make M125 work with SDSUPPORT (#12289) 2018-11-01 15:03:45 -05:00
Scott Lahteine
44f2a82a56 Move axis_homed, axis_known_position to motion.* 2018-10-31 17:44:42 -05:00
Chris Pepper
66d44c72c3 Add fast binary file transfer to SD card option (#12249) 2018-10-30 19:44:12 -05:00
Scott Lahteine
3583e2b449
Followup to Menu Refactor (#12275) 2018-10-30 16:34:45 -05:00
TheLongAndOnly
5536228359 G34 Auto-align multi-stepper Z axis (#11302) 2018-10-29 14:01:36 -05:00
Scott Lahteine
2bf18950ab Refactor LCD menus 2018-10-28 15:46:45 -05:00
MasterPIC
6fbc87301f 'G29 H' to set a centered square probe area (linear, bilinear) (#12242) 2018-10-27 20:30:21 -05:00
TheSFReader
a07ac6312f G0 feedrate may be fixed or variable (#12172) 2018-10-25 10:35:16 -05:00
Ludy
a93e9e6e9b Use preheat labels in place of PLA/ABS (#12194) 2018-10-23 15:38:17 -05:00
Scott Lahteine
b381cad399 Clean up trailing whitespace 2018-10-19 15:27:17 -05:00
TheSFReader
1fb9b299d4 Add M524 to abort SD printing (#12155) 2018-10-19 14:25:07 -05:00
Scott Lahteine
c6a5c74208 Add parentheses to SD macros 2018-10-19 13:52:57 -05:00
Marcio Teixeira
71e19baf69 Fix kill => disable_all_heaters => print_job_timer.stop (#12146) 
- Remove `print_job_timer.stop()` from `disable_all_heaters`
- Call `print_job_timer.stop()` for relevant `disable_all_heaters()`.
- Split up `kill()` for watchdog interrupt safety
 2018-10-18 21:20:56 -05:00
InsanityAutomation
3ec3872730 Single Z raise value for all tool-changing / parking (#12090) 
* Universal tool-change Z lift
* Add TOOLCHANGE_ZRAISE to example configs
* Park/unpark changes to example configs
* Implement DEBUG_DXC_MODE
 2018-10-17 11:11:41 -05:00
Marcio Teixeira
f98f4ac7ea Fix and improve EXTENSIBLE_UI (#12117) 
- Add methods to access print counter data
- Clean up some inconsistent method names
- Clear lcd status after filament change
- Implement `lcd_reset_status` so it works like UltraLCD
 2018-10-16 16:58:29 -05:00
Scott Lahteine
8bf596bd4c RETRACT_ZLIFT => RETRACT_ZRAISE 2018-10-16 16:46:40 -05:00
Scott Lahteine
bf0c809ff2 Update M165 comment 2018-10-16 06:10:27 -05:00
AnHardt
9ac9649183 Mixer - update descriptions (#12108) 2018-10-16 06:09:02 -05:00
AnHardt
f56968ba0b New Continuous Filament Mixer (#12098) 2018-10-16 03:38:57 -05:00
Scott Lahteine
84b59d58fb Clean up whitespace 2018-10-16 02:02:20 -05:00
TheSFReader
af939c158a Option for G0 to have a separate feedrate (#12089) 2018-10-16 01:49:51 -05:00
Scott Lahteine
951b25163e
Extend M217 with configurable park/raise (#12076) 2018-10-13 23:08:20 -05:00
Scott Lahteine
45e738876a Add stepper MS3 support 
Co-Authored-By: TheLongAndOnly <thelongandonly@users.noreply.github.com>
 2018-10-11 01:10:11 -05:00
Giuliano Zaro
d43d4e4219 Refactor PRINTER_EVENT_LEDS, apply to M303 (#12038) 
Co-Authored-By: Giuliano Zaro <gmagician@users.noreply.github.com>
 2018-10-10 21:25:43 -05:00
Scott Lahteine
d556dc1865
Fix and improve EEPROM storage (#12054) 
* Clean up Temperature PID
* Improve EEPROM read/write/validate
* Group `SINGLENOZZLE` saved settings
* Group planner saved settings
* Group filament change saved settings
* Group skew saved settings
* Group `FWRETRACT` saved settings
 2018-10-10 09:45:20 -05:00
Scott Lahteine
07d33849b0 Fix unused var warning, apply ENABLED 2018-10-09 21:31:28 -05:00
Scott Lahteine
ce82015d5f Fix include in G80 2018-10-09 17:24:56 -05:00
Scott Lahteine
5f6aabccbe Tweak M48 spacing 2018-10-08 19:11:25 -05:00
Marcio Teixeira
906a24fa81 Extensible user interface API (#11193) 2018-10-08 15:44:05 -05:00
InsanityAutomation
ee253991d4 Various fixups for single-nozzle filament swap (#12036) 2018-10-08 15:39:55 -05:00
Scott Lahteine
55e810d512 Fix G80 compilation 2018-10-08 13:11:36 -05:00
Scott Lahteine
7db0113b53 Improve E_AXIS_N macro 2018-10-07 18:22:05 -05:00
Sam Lane
f2ecf8d510 Add option to control Solenoids under PARKING_EXTRUDER (#12028) 2018-10-07 17:07:12 -05:00
InsanityAutomation
74cd6cb4fc Single nozzle filament change (#11994) 2018-10-07 17:06:14 -05:00
Scott Lahteine
d6b0fbd771
Use uint8_t for all fan speeds (#12032) 2018-10-07 15:34:41 -05:00
teemuatlut
c447d75916 Add support for TMC2660 (#11998) 2018-10-06 17:18:10 -05:00
Scott Lahteine
52a37913c1 Extend and apply some corrections 2018-10-06 00:27:21 -05:00