MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity
11,160 Commits 1 Branch 0 Tags 129 MiB
3847c08f7e
Commit Graph

9367 Commits

Author SHA1 Message Date
Thomas Moore
49823a4939 Fix broken jerk handling (#12019) 
Fix #12004
 2018-10-06 12:02:50 -05:00
Scott Lahteine
52a37913c1 Extend and apply some corrections 2018-10-06 00:27:21 -05:00
Scott Lahteine
77b9a41f1f Add G-code extensions to example configs 2018-10-06 00:15:35 -05:00
thesfreader
e09c144674 Add CNC-like G-code options 2018-10-06 00:15:27 -05:00
Scott Lahteine
33056046a3
STM32 non-generic PWM_PIN and USEABLE_HARDWARE_PWM (#12016) 2018-10-06 00:14:12 -05:00
Scott Lahteine
d5141c4e03 Fix up leading/trailing whitespace 2018-10-05 18:19:59 -05:00
Marcio Teixeira
03fc4d31d0 Makefile support for 32-bit Archim board and new TMC library (#11997) 
* Support new TMC library and 32-bit Archim board

- Added IS_MCU flag
  - When IS_MCU flag is 1, AVR compiler will be used
  - When IS_MCU flag is 0, ARM compiler will be used
- Added support for new TMC library
- Added support for a 32-bit Archim board, which could probably be used as a basis for other 32-bit boards.
 2018-10-05 16:06:11 -05:00
Scott Lahteine
65b36642f8 Fix Anycubic Kossel config 2018-10-04 20:27:05 -05:00
Scott Lahteine
fc326b3dde Add USB_FLASH_DRIVE_SUPPORT to examples 
Co-Authored-By: marcio-ao <marcio@alephobjects.com>
 2018-10-04 19:54:12 -05:00
Marcio Teixeira
2067619a26 Add USB_FLASH_DRIVE_SUPPORT 2018-10-04 19:54:12 -05:00
Giuliano Zaro
07fe8d28be [2.0.x] Partial Italian revert (#12008) 
- Use a comma for decimals just in one message has not been a good idea.
- Full comments translation
 2018-10-04 14:38:54 -05:00
Scott Lahteine
517b4f4cd4 Fix lightweight UI hotends display 2018-10-04 14:37:24 -05:00
Giuliano Zaro
72a750e0eb [2.0.x] Update Italian language (#11996) 2018-10-04 03:03:47 -05:00
Scott Lahteine
bb561baf9e Tweak some config comments 2018-10-04 02:42:12 -05:00
Nils Hasenbanck
fcf6d127fd STM32 timer simplification (#11995) 
Prescalers aren't calculated for the given target frequency.
Stepper timer should run at 2 Mhz and temperature timer at 72 Khz.
 2018-10-03 22:33:24 -05:00
Scott Lahteine
8daadd2c8c
Fix TMC_DEBUG undefined report_tmc_status (#11993) 2018-10-03 11:56:49 -05:00
Scott Lahteine
c40ea1f0fd Update EEPROM_VERSION 
And set EEPROM_OFFSET to 0, since the historical 100 skipped bytes are never used.
 2018-10-03 11:34:34 -05:00
Scott Lahteine
1358bd9319 Make MAX_EXTRUDERS always 6 2018-10-03 11:32:19 -05:00
AnoNymous
001f26b642 Template struct simplification for serial (#11990) 2018-10-03 11:01:21 -05:00
Scott Lahteine
348004c34f
STM32F7 HAL using the official STM32 Arduino Core (#11750) 2018-10-03 03:26:07 -05:00
Scott Lahteine
3e58b3a5d4 Followup to #11943 2018-10-03 02:55:10 -05:00
teemuatlut
c3229e1b34 Migrate to a new TMC library (#11943) 2018-10-03 02:48:49 -05:00
brian park
2abf3d258d Korean language translation support (#11987) 2018-10-03 01:53:34 -05:00
Eduardo José Tagle
d6955f25b2 Expand serial support in DUE/AVR hals exploiting the templated MarlinSerial classes (#11988) 2018-10-03 00:47:27 -05:00
Eduardo José Tagle
f6f2246f59 Templatized serial classes (#11982) 2018-10-02 22:15:30 -05:00
Scott Lahteine
ee53f7d813 Revert header reorg. 2018-10-02 22:09:41 -05:00
Scott Lahteine
d619ba2685 Tweak STM32F4 config 2018-10-02 22:03:00 -05:00
LineF
d777cef837 fixed minimum macro (#11986) 2018-10-02 21:35:34 -05:00
Scott Lahteine
e3f7b69105
Add PROBING_STEPPERS_OFF (#11984) 
Co-Authored-By: houseofbugs <houseofbugs@gmail.com>
 2018-10-02 05:13:58 -05:00
Scott Lahteine
0e5bcdf695 Make DISABLE_INACTIVE_EXTRUDER a simple switch 2018-10-02 04:57:03 -05:00
Scott Lahteine
0dedb3e139
Reorganize some core headers (#11983) 2018-10-02 04:25:46 -05:00
Thomas Moore
ab4549d2bc [2.0.x] Add simultaneous retraction for mixing extruder (#11941) 2018-10-01 23:32:02 -05:00
Scott Lahteine
c75f5a376b Tweak some comments 2018-10-01 18:34:14 -05:00
Scott Lahteine
f4c625d3a1 Ensure MIN/MAX overrides 2018-10-01 05:32:55 -05:00
Scott Lahteine
3019713402 Reorganize some enums 2018-10-01 05:32:55 -05:00
Scott Lahteine
606a4362b3 Reduce STM32F4 compile warnings 2018-10-01 04:41:17 -05:00
Scott Lahteine
b3154b2120 Apply MOVE_Z_WHEN_IDLE to example configurations 
Co-Authored-By: dot-bob <gibben@gmail.com>
 2018-10-01 01:41:11 -05:00
dot-bob
b0fd8f2d74 Add option to move Z on double-click when idle 2018-10-01 01:41:11 -05:00
Scott Lahteine
389376c40e Clean up softspi.h 2018-10-01 01:29:48 -05:00
Scott Lahteine
e78bdd654d Clean up BABYSTEP options 2018-10-01 01:29:21 -05:00
InsanityAutomation
8ae113ff36 Show zprobe_zoffset when BABYSTEP_HOTEND_Z_OFFSET is disabled (#11973) 2018-10-01 00:30:10 -05:00
InsanityAutomation
2e98437392 Clean up main menu (#11972) 2018-10-01 00:15:06 -05:00
InsanityAutomation
6d862b2916 Home before level corners, if needed (#11976) 
…and add a consistent homing screen for all LCD pre-homing.
 2018-10-01 00:14:28 -05:00
Scott Lahteine
11ac75edcb
Use PGM_P for PSTR pointers (#11977) 2018-09-30 23:44:33 -05:00
InsanityAutomation
4d5566a6b7 Add filament runout sensor menu item (#11971) 2018-09-30 21:33:46 -05:00
Scott Lahteine
8489673cea Adjust some HAL formatting 2018-09-30 21:24:37 -05:00
Scott Lahteine
fb8a07660a Followup to minmax patch 
Co-Authored-By: Palatis <palatis@gmail.com>
 2018-09-30 21:17:31 -05:00
Scott Lahteine
3c40933713 Remove trailing spaces, old comment 2018-09-30 20:47:06 -05:00
Hannes Brandstätter-Müller
a3ec805c97 Anycubic Kossel Linear+: corrected DELTA_DIAGONAL_ROD (#11964) 2018-09-30 05:41:26 -05:00
AnoNymous
b30ca652ae Replace MIN# / MAX# with variadic MIN / MAX (#11960) 2018-09-30 04:59:14 -05:00
Scott Lahteine
e10f730478 Tweak vector_3::apply_rotation 2018-09-30 01:51:33 -05:00
Scott Lahteine
e2ab78d876 Fix SERIAL_PORT_2 sanity check 2018-09-30 00:24:10 -05:00
AnoNymous
a644d8cb93 Avoid copies in vector and matrix (#11959) 2018-09-29 23:04:40 -05:00
Scott Lahteine
693865a649 Fix some whitespace 2018-09-29 22:36:36 -05:00
Scott Lahteine
9903305dda
Merge pull request #9582 from tcm0116/2.0.x-sensorless_probing 
[2.0.x] Add TMC2130 sensorless probing
 2018-09-29 21:02:22 -05:00
Scott Lahteine
14df753086 Correction for block->mix_steps 
Fix #11484
 2018-09-29 19:13:17 -05:00
Alexander Amelkin
2ecfda80ac Improve support for JTAG/SWD pins reuse (#11963) 
STM32 can reuse JTAG and SWD pins separately. Add `DISABLE_DEBUG` option to disable both interfaces and retain `DISABLE_JTAG` to disable JTAG only.
 2018-09-29 19:00:49 -05:00
Scott Lahteine
bb47009656 Apply sensorless changes to example configs 2018-09-29 18:54:14 -05:00
Thomas Moore
3286325044 Add TMC2130 sensorless probing 2018-09-29 18:54:14 -05:00
Scott Lahteine
7d5c336c56 Corrections for dylsexic TMC 2018-09-29 18:51:11 -05:00
Scott Lahteine
d89d8fe852 Fix Busy State in temperature.cpp 
Fix #11954
 2018-09-29 17:03:35 -05:00
Giuliano Zaro
70e7a465d8 [2.0.x] Fix compile error (#11951) 
Fix compile error intruduced with M109 modification
 2018-09-29 13:48:23 -05:00
Hannes Brandstätter-Müller
935b120949 Anycubic Kossel: probe closer to the edge (#11950) 2018-09-29 02:26:16 -05:00
Scott Lahteine
1410e79e7f Ensure M109 handles autotemp 2018-09-29 02:12:06 -05:00
Scott Lahteine
e4389f7d23
Standard methods to wait for heating (#11949) 2018-09-29 01:44:47 -05:00
Scott Lahteine
bdc9889d3a Fix a sanity check 2018-09-29 00:24:25 -05:00
Scott Lahteine
321f9140d1 Followup to #11904 2018-09-28 20:04:40 -05:00
InsanityAutomation
23114aeb81 Fix garbled M119 output. Honor NUM_RUNOUT_SENSORS (#11948) 2018-09-28 19:00:11 -05:00
Scott Lahteine
1667ed9d1c Pause should use ECHOLNPGM 2018-09-28 18:15:38 -05:00
Victor Tseng
93839e2f73 Add option to enable/disable autoretract altogether (#11904) 2018-09-28 16:52:56 -05:00
Scott Lahteine
ad21a4f07b Tweaks to HAL format and order 2018-09-28 15:59:50 -05:00
Scott Lahteine
b682a1961a Tweak STM32F7 TMC2660 class 2018-09-27 21:13:15 -05:00
Scott Lahteine
a0a3b23e35 Reduce Raptor bootscreen by 144 bytes 2018-09-27 18:24:40 -05:00
InsanityAutomation
95d793456b Add Formbot Raptor config, fix other Formbot configs (#11926) 2018-09-27 19:20:43 -04:00
Mitch Roote
d016b572e3 [2.0.x] Add pin configuration for Fysetc F6 (#11932) 2018-09-27 19:20:19 -04:00
Alexander Amelkin
84926b1d5a HAL general support for DISABLE_JTAG option (#11211) 
Some STM32-based boards may use multiplexed JTAG pins as IO. Up to now the `DISABLE_JTAG` option (defined in pins files) was only supported for AT90-based boards. This commit generalizes the code and adds support for boards based on STM32F1 and STM32F4.
 2018-09-27 19:02:50 -04:00
Scott Lahteine
c575c5d5f6
Bring example configs up to date (#11939) 2018-09-27 18:47:26 -04:00
Scott Lahteine
6b1a4f30a8 Fix case of T-Rex 3 _Statusscreen.h 2018-09-27 17:00:55 -05:00
Scott Lahteine
ab7bfa86e2 Fix case of T-Rex-3 _Statusscreen.h 2018-09-27 17:00:55 -05:00
Scott Lahteine
241168926d Update some configs 2018-09-27 16:42:59 -05:00
Scott Lahteine
cb6454118c Workaround for Pronterface M29 2018-09-27 16:27:02 -05:00
Victor Tseng
eeab4141db [2.0.x] Anycubic Trigorilla 14 pins tweak (#11869) 2018-09-27 16:06:21 -04:00
InsanityAutomation
cb9dc56630 Add GT2560 v3 support (#11914) 2018-09-27 15:13:15 -04:00
InsanityAutomation
f2e630a05e Stow probe on probing failed (#11936) 
Prevents probe from being left down should probing fail and print job continue
 2018-09-27 13:26:14 -04:00
Hannes Brandstätter-Müller
0b602ae101 [2.0.x] Fix Anycubic Kossel with Probe V1, stuck LCD message after stow (#11929) 2018-09-27 13:23:53 -04:00
Giuliano Zaro
dc11131656 [2.0.x] fix possible race condition (#11923) 
Fix some commits done in #11900
 2018-09-25 13:56:57 -04:00
Scott Lahteine
d6b9327c11 Followup for Endstop Noise Threshold 
Followup to #11912
 2018-09-25 13:50:49 -04:00
Scott Lahteine
aa6e8e9325 Tweak some config comments 2018-09-25 13:42:28 -04:00
Scott Lahteine
5490a664f5
Expose: Homing Validation and Endstop Noise Threshold (#11912) 2018-09-24 21:59:12 -04:00
Scott Lahteine
cee34f7290
Followup for BABYSTEP_HOTEND_Z_OFFSET (#11916) 2018-09-24 21:46:56 -04:00
teemuatlut
884ad75cb8 Update config files 2018-09-24 17:26:18 -04:00
Giuliano Zaro
18e456d38d [2.0.x] fix home endstop bug (DON'T MERGE, needs discussion) (#11900) 2018-09-24 16:56:01 -04:00
Scott Lahteine
6742026568 Followup for 6 extruders 2018-09-24 14:36:50 -04:00
Scott Lahteine
04bdff4115 Add a blank line 2018-09-24 12:49:02 -04:00
Marcio Teixeira
ccbd045f02 Fixed warning about comparing signed to unsigned (#11909) 2018-09-24 12:03:29 -04:00
InsanityAutomation
1104054d73 2.0 IDEX Independent z offset and other fixes (#11862) 
* Add Formbot Raptor board

Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>

* Add a second Z probe Z offset

Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>

* Modify method to utilize live adjustment of hotend z offset

Should probably move config option to babystepping and rename as it may now apply to all multiextruder systems

* Move config item and catchup other code to current method
 2018-09-24 09:40:48 -05:00
Scott Lahteine
217e0efd20
General option PAUSE_BEFORE_DEPLOY_STOW (#11905) 2018-09-24 00:43:43 -04:00
Scott Lahteine
849dea92a8 Move probe extras below probe types 2018-09-23 23:23:07 -04:00
Scott Lahteine
a2b0260f0f Update Sublime files 2018-09-23 19:59:08 -04:00
Hannes Brandstätter-Müller
a4cdffdd69 Support for manually deployed fixed probes (#11899) 2018-09-23 19:59:08 -04:00
Scott Lahteine
ddcbf80f23 Followup for Z_TRIPLE_ENDSTOPS 2018-09-23 12:22:31 -04:00
Marcio Teixeira
c411e7eb0d [2.0.x] Squelch compiler warnings seen with -Wall (#11889) 2018-09-23 12:00:34 -04:00
Roxy-3D
83105590a0 Better default values for Mesh Inset 2018-09-22 03:25:18 -04:00
Roxy-3D
4163c1a514 Fix end stop and Z-probe reporting logic 2018-09-22 03:25:18 -04:00
Scott Lahteine
ea9eb2fc8f Fix servo angles in config-store 2018-09-21 15:41:36 -04:00
Roxy-3D
d3d6be8210 Add MAX7219 reverse units option (#11860) 2018-09-19 18:54:51 -05:00
Scott Lahteine
beab9733f8 Remove extra clauses in config-store 2018-09-19 17:06:51 -05:00
Scott Lahteine
5a74b12b45 Followup to #11769 2018-09-19 16:40:32 -05:00
InsanityAutomation
f38570ac55 Add custom user menu title (#11769) 2018-09-19 15:04:34 -05:00
Scott Lahteine
17494099a9 Fix parking_extruder_tool_change 
Fix #11872
 2018-09-19 03:02:07 -05:00
Scott Alfter
140caf99b8 E0_CS_PIN moved from A13 to A15 on RAMPS-FD v2.2 (#11865) 2018-09-18 22:24:20 -05:00
Scott Lahteine
10590c2f80 Fix some fan conditionals 2018-09-18 21:23:33 -05:00
Scott Lahteine
e4ee607fc8 Fix Dual X FRS in M600 
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
 2018-09-18 21:23:33 -05:00
Scott Lahteine
bae8f82ba8
[2.0] Fix Mixing Extruder mixing factors (#11861) 2018-09-18 01:10:41 -05:00
Scott Lahteine
c5e5cc5e9f Fix some trailing whitespace, macros 2018-09-17 17:30:04 -05:00
AnHardt
54bd124665 2.0.x: Fix normalize_mix() (#11856) 
Mix factors needed to be updated consistent with the recent Stepper/Planner code refactor.
 2018-09-17 16:37:38 -05:00
Roxy-3D
5fbfbde532
Fix example file to pull in correct pins file 2018-09-17 10:41:30 -05:00
Roxy-3D
378f354939
IDEX Scaled Duplication is still under development 
Take it out of the menu until it is tested and working.
 2018-09-17 10:26:44 -05:00
Scott Lahteine
65045ba54b tmc_util fix part 2 
Followup to 115abf9
 2018-09-17 05:36:17 -05:00
Scott Lahteine
09a2bee8aa
Support more filament runout sensors in M119 (#11851) 2018-09-17 03:27:13 -05:00
Scott Lahteine
115abf9c53 Fix syntax error in front of tmc_axes 2018-09-17 01:10:20 -05:00
Roxy-3D
0780913848 IDEX Improvements (#11848) 2018-09-17 01:06:22 -05:00
Scott Lahteine
39732838b4 Tweak indent of Chinese languages 2018-09-17 00:58:32 -05:00
Scott Lahteine
53bd0b55cb Followup for 6 extruders 2018-09-16 23:57:50 -05:00
Scott Lahteine
1718eff54a Code changes supporting up to 6 extruders 2018-09-16 22:32:53 -05:00
Scott Lahteine
f5c210d33d Config changes supporting up to 6 extruders 2018-09-16 22:22:35 -05:00
Scott Lahteine
d948c6e867 RADDS Extension Board V3 support 2018-09-16 22:22:35 -05:00
Thomas Moore
c437bb08f1 Overhaul of the planner (#11578) 
- Move FWRETRACT to the planner
- Combine leveling, skew, etc. in a single modifier method
- Have kinematic and non-kinematic moves call one planner method
 2018-09-16 21:24:15 -05:00
Scott Lahteine
8323a08642 Clean up some whitespace 2018-09-16 19:44:21 -05:00
Scott Lahteine
6286afd456 Add Triple-Z options to example configs 2018-09-16 00:35:58 -05:00
Holger Müller
1a6f2b29b8 Add support for Triple-Z steppers/endstops 2018-09-16 00:35:58 -05:00
Hannes Brandstätter-Müller
bc06406d7d Fix Anycubic Kossel config (probe crash) (#11832) 2018-09-15 23:27:21 -05:00
Scott Lahteine
66f83d33e6 Fix some config comments 2018-09-15 23:21:55 -05:00
Hannes Brandstätter-Müller
84ed9b5a63 Send "G33 S P1" for Delta Height Calibration (#11831) 2018-09-15 20:17:35 -05:00
Scott Lahteine
215eee4fe5 Use 'friend' to access set_directions 2018-09-15 20:11:10 -05:00
Cassiano Leal
ff51e7322d Fix for Stepper::set_directions() compilation error (#11838) 2018-09-15 19:31:51 -05:00
Scott Lahteine
809b232fa2 Fix stepper directions after M501/M502 
See https://github.com/MarlinFirmware/Marlin/issues/11103#issuecomment-421387611

Co-Authored-By: tcm0116 <tcm0116@users.noreply.github.com>
 2018-09-14 20:00:55 -05:00
Scott Lahteine
f79a5a9dee Tweak spacing of L6470 options 2018-09-12 23:18:11 -05:00
Hannes Brandstätter-Müller
c37d3ae97d [2.0.x] Fix NOZZLE_PARK_FEATURE for Anycubic Kossel (#11812) 2018-09-12 15:37:38 -05:00
HenningJW
4fb2134f00 Fix non-sensical values for Zonestar themistor table (#11817) 
Values taken from Zonestar firmware for P802QA with a Melzi board. Timestamps from the firmware package are from April 2016.
 2018-09-12 15:36:04 -05:00
Scott Lahteine
b220a825a7 Fix raw_filwidth_value error 2018-09-12 04:31:55 -05:00
Scott Lahteine
1933d5d6fb Fix SD autostart with no LCD 2018-09-12 03:49:59 -05:00
Roman Moravčík
8bce5370c7 Updated slovak translation (#11807) 2018-09-12 03:29:17 -05:00
Giuliano Zaro
64d629ba2a [2.0.x] Italian language fix (#11796) 2018-09-12 03:28:22 -05:00
Scott Lahteine
8584d3697d Fix servo count define conflict 
`MAX_SERVOS` => `NUM_SERVO_PLUGS`
 2018-09-11 16:20:31 -05:00
Scott Lahteine
06949ae510 Fix MSG_FILAMENT_CHANGE_HEAT_1 for small LCD 2018-09-10 23:21:37 -05:00
Scott Lahteine
d882717d98
Save some PROGMEM with constexpr (#11798) 
When possible, make `active_extruder` a `constexpr` to save some PROGMEM.
 2018-09-10 23:09:26 -05:00
Sam Lane
4f883d5971 [2.0.x] Extruder-Distinct Linear Advance K Factors (#11789) 2018-09-10 22:37:32 -05:00
Scott Lahteine
fe9f088d60
[2.0.x] Anycubic LinearPlus, Trigorilla 1.4 (#11730) 2018-09-10 21:25:40 -05:00
Scott Lahteine
b6aae2b322 Tweak RAMPS_FD_V1 pins 2018-09-10 15:43:03 -05:00