Bob-the-Kuhn
b6415dc169
finish
2017-11-10 14:39:55 -06:00
Scott Lahteine
0efa66be0b
Updates to Traditional Chinese
...
From @cheton at #8347
2017-11-10 04:52:20 -06:00
Scott Lahteine
cba9c1cf9e
Add pre-calculated planner.e_factor
2017-11-10 03:14:24 -06:00
Thomas Moore
600c85226e
Normalize load/unload length in M600
2017-11-10 02:31:46 -06:00
Scott Lahteine
81b91b3f9d
Clean up some trailing white-space
2017-11-10 02:31:04 -06:00
Roxy-3D
2f9848ede3
Correct gMax 1.5+ example file
...
And... Keep both branches in synchronization.
2017-11-09 23:44:14 -06:00
Scott Lahteine
006dad4b52
Add pins_RURAMPS4D.h & change pins.h
...
http://3dtoday.ru/blogs/svs0724/ruramps4d-ramps-for-adruino-due-the-pilot-shipment-available-for-zack/
2017-11-09 21:51:06 -06:00
Scott Lahteine
00514857e9
SBASE serial port -1, RAMPS spacing
2017-11-09 21:41:07 -06:00
Scott Lahteine
c66696c507
Merge pull request #8344 from tcm0116/2.0.x-delta_height
...
[2.0.x] Add delta_height variable in lieu of using home_offset
2017-11-09 01:21:53 -06:00
Scott Lahteine
22e18fe832
Patch _manual_goto_xy for kinematics
2017-11-08 22:21:38 -06:00
Scott Lahteine
0cfb936dd1
Clarify some motion code
2017-11-08 22:15:55 -06:00
Thomas Moore
f34c3597dc
Add delta_height variable in lieu of using home_offset
2017-11-08 22:10:08 -06:00
Bob-the-Kuhn
d47fbf791b
Arduini IDE compatibility changes
...
changed includes to make Arduino IDE happy
2017-11-08 20:49:49 -06:00
Scott Lahteine
95ea43bde4
Update XYZ dual stepper configurations
2017-11-08 20:31:43 -06:00
Scott Lahteine
b0b4a20930
Tweaks to core motion code
2017-11-08 20:09:09 -06:00
Scott Lahteine
8805e24cc7
Fix tilt_mesh_based_on_probed_grid output bug
2017-11-08 20:06:20 -06:00
Scott Lahteine
24437fbb13
Fix G26 Y argument bug
2017-11-08 19:20:10 -06:00
Scott Lahteine
09b05c9d79
Merge pull request #8321 from Bob-the-Kuhn/pins_re-arm
...
2.0.x - pins_RAMPS_RE_ARM.h - add mega2560 pin numbers
2017-11-08 13:11:13 -06:00
Scott Lahteine
e6788bb6ae
Fix get_destination_from_command for E
2017-11-08 12:54:00 -06:00
Roxy-3D
967104e1ce
Default Extrusion Settings were off a few lines in some of the example config files. ( #8333 )
2017-11-08 11:56:00 -06:00
Bob-the-Kuhn
8875885a15
pins add old names
...
fix typo
re-write PWM section, add "not on Re-ARM" list
2017-11-08 11:11:38 -06:00
Roxy-3D
1c6e83c137
if !HAS_MESH we still need to do some motion! ( #8328 )
...
* if !HAS_MESH we still need to do some motion!
Thank You MagoKimbra !
* Ooops.... need #else and not #elif
2017-11-08 09:42:21 -06:00
Scott Lahteine
82f45c3e6a
Patch G33 misuse of PROBE_MANUALLY
2017-11-08 00:36:06 -06:00
Scott Lahteine
064e6fe60e
Remove debugging pin toggle from LCD code
2017-11-07 23:00:54 -06:00
Bob-the-Kuhn
0483a7df91
AVR RRD works
...
LPC1768 VIKI2 & RRDFG are working
looks like all SPIs are working
library change
sh1106 locks up
fixed lockup, started I2C SW com
pretty
re-org
restore a few files
make library happy
switched HAL version of rrd
fix travis error
travis error fixes
another travis fix
cleanup
minor update
one more
correct spacing in platformio.ini
2017-11-07 18:40:29 -06:00
Scott Lahteine
96c9d715f3
Patch abuse of sprintf_P in G33
2017-11-07 17:33:50 -06:00
Roxy-3D
ed62c621d7
Fix G26 Circle Drawing. Add Default Extrusion Settings ( #8313 )
...
- Fix G26 Circle Drawing.
- Add default extrusion settings so machine can print lines on print bed
- Yet to be done: Get LCD Menu's to use these settings.
2017-11-07 17:13:53 -06:00
Scott Lahteine
8fea26aa9d
Fix PID_autotune watch temp increase value
2017-11-07 15:51:48 -06:00
Scott Lahteine
2c099fd4c2
Update Thermal Protection Documentation
2017-11-07 15:46:44 -06:00
Colten Edwards
a6160916b0
[2.0] Fix M48 for delta printers/ABL compile issue ( #8286 )
...
* fix M48 for delta printers
fix M48 for delta printers. home printer if not already homed.
* remove ENABLED(DELTA)
remove ENABLED(DELTA) as it is not needed.
* Update M48.cpp
* abl needs queue.h
without queue.h abl will not compile since there is a script that runs at the end of it and we need to queue it up.
2017-11-07 15:36:33 -06:00
Scott Lahteine
17ef0a513b
Update G92 for native workspace
2017-11-07 13:07:16 -06:00
Scott Lahteine
b4bf8928aa
German language updates
...
Corresponding to #8306
2017-11-07 12:10:29 -06:00
Thomas Moore
73ca5345e1
Fix Delta EEPROM
2017-11-07 16:48:21 +00:00
Scott Lahteine
714d2b9bbc
Merge pull request #8297 from thinkyhead/bf2_M118_and_others
...
[2.0] Fix M118, compiler warnings, etc.
2017-11-06 23:25:49 -06:00
Alexey Shvetsov
83555933aa
Add platformio support for stm32 ( #8246 )
...
[2.0] Add platformio support for stm32
2017-11-06 23:03:59 -06:00
Scott Lahteine
85a62bbf46
Misc. fixes to compiler warnings, etc.
2017-11-06 22:57:05 -06:00
Scott Lahteine
e6aba99f16
Fix M118 parameters, with strict guideline
2017-11-06 22:57:01 -06:00
Scott Lahteine
e9b1944a67
Patch non-extended font option
2017-11-06 21:42:21 -06:00
Roxy-3D
6324b09934
Revert "Fix EEPROM crc ( #8284 )" ( #8292 )
...
This reverts commit 172c36f517
2017-11-06 19:52:05 -06:00
Rowan Meara
172c36f517
Fix EEPROM crc ( #8284 )
2017-11-06 19:19:30 -06:00
Scott Lahteine
cc4d28b73c
Update bilinear for native workspace
2017-11-06 17:04:41 -06:00
Scott Lahteine
94c7205d64
Merge pull request #8281 from thinkyhead/bf2_alligator_dac
...
[2.0] Use fastio for Alligator dac084s085, etc.
2017-11-06 12:16:18 -06:00
Scott Lahteine
2246316605
Fix name collision. timer_t => hal_timer_t
2017-11-05 19:31:07 -06:00
Jason Hitesman
4efaef7039
[2.0.x] Fix archim2 SSDS define ( #8278 )
...
* Fix SSDS define
* Update pins_ARCHIM2.h
2017-11-05 19:23:19 -06:00
Scott Lahteine
c8dfa26bc8
Use fastio for STM32F1 endstop interrupts
2017-11-05 19:20:28 -06:00
Scott Lahteine
185dec800b
Use fastio for HAL SPI EEPROM
2017-11-05 19:20:03 -06:00
Scott Lahteine
297666ea14
Use fastio for Alligator dac084s085
2017-11-05 19:14:42 -06:00
Scott Lahteine
c5d95d318b
Merge pull request #8249 from thinkyhead/bf2_nozzle_cleanup
...
[2.0] Cleanup Nozzle class, fix XY vs Z move order
2017-11-05 18:51:11 -06:00
Scott Lahteine
7e2fee9d56
Merge pull request #8274 from tcm0116/2.0.x-re_arm_D8
...
[2.0.x] Correct RAMPS_D8_PIN for Re-ARM
2017-11-05 18:39:28 -06:00
Scott Lahteine
59c558d612
Merge pull request #8275 from GMagician/2.0.x-Typo-fix
...
[2.0.x] typo fix (removed spaces)
2017-11-05 18:39:04 -06:00
Scott Lahteine
be73d5cc08
Cleanup Nozzle class, fix XY vs Z move order
2017-11-05 18:31:07 -06:00
GMagician
9e93b7ccbd
[2.0.x] removed spaces
...
Removed spaces in array declaration
2017-11-05 20:42:48 +01:00
Thomas Moore
b91a822d7a
Correct RAMPS_D8_PIN for Re-ARM
2017-11-05 13:03:42 -06:00
studiodyne
d295f984e3
Update fwretract.cpp
2017-11-05 15:42:30 +01:00
Scott Lahteine
1b40e9c464
Implement CNC_COORDINATE_SYSTEMS
2017-11-04 22:28:46 -05:00
Scott Lahteine
1b42fba39b
Add CNC_COORDINATE_SYSTEMS to configs
2017-11-04 22:28:46 -05:00
Scott Lahteine
a22434508f
Match tweaks to G33 from 1.1
2017-11-04 22:28:46 -05:00
Scott Lahteine
c07bbd4154
Prettify some EEPROM code
2017-11-04 22:28:46 -05:00
Scott Lahteine
d6aa127c76
Remove I2CPEM workspace offset
2017-11-04 22:28:46 -05:00
Scott Lahteine
79772219ae
Fix Fan Multiplexer init
2017-11-04 22:28:46 -05:00
Scott Lahteine
ca7d36d9ed
RAMPS pins for ANET_KEYPAD_LCD
2017-11-04 21:22:53 -05:00
Colten Edwards
e0a6ee8da5
[2.0] Fix up G33, LPC1768 + SDCARD_SORT_ALPHA ( #8250 )
...
* Update Conditionals_post.h
* Add a cast to round() to convert to a unsigned int
Add's a cast to round() so that it will compile properly. round() returns a float which must be cast to a integer for the following % operation. Use a unsigned int as a negative index to an array is wrong. Should never be more than 255 points allowing us to use a 8 bit cast.
* Update G33.cpp
2017-11-04 18:04:18 -05:00
Scott Lahteine
dac1f6fe74
Tweaks to cubic_b_spline code style
2017-11-04 14:46:10 -05:00
Scott Lahteine
4df024d7b9
Merge pull request #8234 from thinkyhead/bf2_native_operation
...
[2.0.x] Operate in Native Machine Space
2017-11-04 14:31:44 -05:00
Scott Lahteine
601ccded89
Fix case-insensitive config issue
2017-11-04 14:10:13 -05:00
Scott Lahteine
f8393a0908
Operate in Native Machine Space
2017-11-04 00:05:38 -05:00
Scott Lahteine
d83a9a53e8
Merge pull request #8220 from thinkyhead/bf2_serial_port_-1
...
[2.0] Add SERIAL_PORT -1 option for configurators
2017-11-03 15:25:12 -05:00
Scott Lahteine
93ba72ea83
Add SERIAL_PORT -1, set on SBASE, STM32F103RET6
2017-11-03 15:22:45 -05:00
Scott Lahteine
7e43dd1d23
Fix probes configuration url
...
Based on #8241 by @machaj
2017-11-03 13:35:40 -05:00
AnHardt
ca0e4b4e96
Some cleanup around 'lcd_bootscreen()' and 'lcd_kill_screen()'
...
Move 'lcd_bootscreen()' from `lcd_init()` to 'setup()' where it is cexecute exactly once. Saves 'bool show_bootscreen'.
Move the call of 'lcd_custom_bootscreen()' to the begin of 'lcd_bootscreen()'.
Move the delays into the related functions.
Move the picture loop around 'lcd_kill_screen()' into the function.
2017-11-03 12:02:48 +01:00
Scott Lahteine
84b93d941f
Merge pull request #8178 from thinkyhead/bf2_config_tweak
...
[2.0.x] Faster menu navigation for Anet A8
2017-11-03 04:49:17 -05:00
teemuatlut
70be4d206e
[2.0.x] UltiMachine Archim2 ( #8190 )
...
* UltiMachine Archim2 support
* SPI gets included by the library
* Invert TMC2130 diag pin state
* Clean up Archim2 pins
* Update Archim2 config
* FAN2 -> FAN1
* Cleanup
* Add brief Archim installation instructions
* Bring pins into compliance
* Update 1.0 SD Detect pin for 1.1
* Update Configuration.h
* Update pins_ARCHIM2.h
2017-11-03 04:48:15 -05:00
Scott Lahteine
f3deb37bdf
Merge pull request #8236 from thinkyhead/bf2_protect_M303
...
[2.0.x] M303 thermal runaway protection
2017-11-03 04:42:14 -05:00
Scott Lahteine
31f112cf58
Cleanup trailing whitespace
2017-11-03 04:07:45 -05:00
Scott Lahteine
2f9e42feb9
M303 thermal runaway protection
2017-11-03 03:57:46 -05:00
Scott Lahteine
e5ae545647
Remove ADCKey steps acceleration
2017-11-03 03:41:55 -05:00
Luc Van Daele
6827e243a0
[2.0.x] G33 magic numbers ( #8171 )
...
* [2.0.x] G33 magic numbers
* oops
* Comments
* oops
* warning
* better comment section
* remarks
* extra grids
2017-11-03 03:36:16 -05:00
Scott Lahteine
8735ae984b
Merge pull request #8227 from tcm0116/2.0.x-pin_mapping
...
LPC1768: updates to use the new pin_t typedef
2017-11-03 03:10:19 -05:00
AnHardt
c72a0610b4
Fix watchdog in WATCHDOG_RESET_MANUAL mode AVR
2017-11-03 04:43:00 +01:00
Thomas Moore
13d839795c
LPC1768: updates to use the new pin_t typedef
2017-11-02 18:43:57 -05:00
Scott Lahteine
eb13b8d985
Add MKS Gen L board
2017-11-02 17:06:08 -05:00
Morten
063e957fc4
Update pins_MKS_SBASE.h ( #8188 )
...
* Update pins_MKS_SBASE.h
Deleted E_MUX2, not used.
Changed #define LCD_PINS_D4 P0_14 // EXP1.5 to #define LCD_PINS_D4 P0_15 // EXP1.5, wrong in MKS's pinout schematic.
Swapped TEMP_BED_PIN and TEMP_0_PIN port's, request from user, more logical...
* Update pins_MKS_SBASE.h
Moved MUX signals to J8 and re added MUX2, cleaner wiring..
2017-11-02 13:50:23 -05:00
Scott Lahteine
f7133e53fd
Fix case light off
...
Addressing #8205
2017-11-01 21:22:15 -05:00
Scott Lahteine
0108d5181f
Allow asterisks in G-Code commands
...
Addressing #6655
2017-10-31 21:20:41 -05:00
Scott Lahteine
34745b2183
Organize boards.h by architecture
2017-10-31 16:10:38 -05:00
android444
9cc1d8e312
[2.0.x] Support for SilverGate Board
2017-10-31 15:27:26 -05:00
Scott Lahteine
03e5369411
Faster menu navigation for Anet A8
...
Addressing #8166
2017-10-31 14:46:55 -05:00
Scott Lahteine
f1edf83720
Merge pull request #8187 from rafaljot/patch-5
...
Update InterruptVectors_Due.cpp
2017-10-31 14:14:08 -05:00
Scott Lahteine
b2bd77c40a
Merge pull request #8191 from thinkyhead/bf2_rearm_more
...
[2.0.x] Add SDCARD_SORT_ALPHA options for LPC1768
2017-10-31 14:12:14 -05:00
Scott Lahteine
571ced712d
Add SDCARD_SORT_ALPHA options for LPC1768
2017-10-31 14:05:40 -05:00
rafaljot
778e4e4c23
Update InterruptVectors_Due.cpp
...
const pfnISR_Handler *isrtab = get_relocated_table_addr();
What compiler do you use? Arduino 1.8.5 can't compile this "const".
2017-10-31 15:00:06 +01:00
Scott Lahteine
cae8703e0d
Merge pull request #8181 from thinkyhead/bf2_fix_bootscreen_repeat
...
[2.0.x] Only show custom bootscreen once
2017-10-31 02:37:40 -05:00
Scott Lahteine
a516856df9
Only show custom bootscreen once
2017-10-31 01:47:30 -05:00
GMagician
727a403ba1
[2.0.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour ( #8176 )
...
* [2.0.x] Fix NO_MOTION_BEFORE_HOMING unwanted behaviour
NO_MOTION_BEFORE_HOMING should prevent XYZ movements only when homing is not done.
E axes should be allowed
* Update G0_G1.cpp
* Update G0_G1.cpp
2017-10-30 22:50:22 -05:00
Alexey Shvetsov
577659cacf
Basic support for Azteeg_X5_GT ( #8139 )
...
* Basic support for Azteeg_X5_GT
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
* Add fan pins for AZTEEG X5 GT
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
* Fix endstop pins
* Add servo0 pin
2017-10-30 16:01:20 -05:00
Scott Lahteine
0b02f9cc33
Merge pull request #8168 from thinkyhead/bf2_config_tweak
...
[2.0.x] Apply Re-ARM SPI review items
2017-10-30 15:49:50 -05:00
Scott Lahteine
04c0d9f3c3
Implement kinematic software endstops
2017-10-30 15:16:30 -05:00
Scott Lahteine
9f89b5d876
Fix for MAX_VFAT_ENTRIES sanity check
2017-10-30 15:11:47 -05:00
Scott Lahteine
2cdde08339
Apply items specified in code review
...
Followup to #8122
2017-10-30 15:03:07 -05:00
Scott Lahteine
34be5d33c0
The plural of 'axis' is 'axes'
2017-10-30 14:21:43 -05:00
Bob-the-Kuhn
6e5f13a5c2
Merge pull request #8122 from Bob-the-Kuhn/2.0.x-restore-Re-ARM-RepRap-Discount-Full-Graphics-fix-(partial-solution)
...
2.0.x - Restore fix for garbaged display on Re-ARM with RepRap Full Graphics Smart Controller
2017-10-30 13:16:16 -05:00
Bob-the-Kuhn
b7a66742dd
tested
...
add sort alpha section to other LPC1768 boards
2017-10-30 13:01:19 -05:00
Jeffrey Li
bbc2e66634
Fix AZSMZ MINI pins for new LPC1768 pinmapping
2017-10-30 04:19:06 -07:00
Scott Lahteine
31e96935f7
Fix EXTRA_FAN_SPEED
...
Addressing #8158
2017-10-30 00:10:00 -05:00
Scott Lahteine
c94dce6b32
Merge pull request #8113 from thinkyhead/bf2_fixup_sd_reprint
...
[2.0.x] Cleanup after SD Print Again, whitespace, tabs
2017-10-29 23:57:51 -05:00
Scott Lahteine
ce1c9c0808
Tweak QUICK_HOME description
2017-10-29 23:48:13 -05:00
Scott Lahteine
12458cefc4
Remove 5s timer hack. Encoder pos is saved on print start!
2017-10-29 22:45:19 -05:00
Scott Lahteine
9a4cf11835
Remove return_to_status_ms hack, just use defer...
2017-10-29 22:45:18 -05:00
Scott Lahteine
8949c8c0a5
Move SD_REPRINT_LAST_SELECTED_FILE to ultralcd.cpp
2017-10-29 22:45:18 -05:00
Scott Lahteine
817175613a
Merge pull request #8157 from thinkyhead/bf2_anet_10_servo
...
[2.0.x] Define a default SERVO0_PIN for Anet 1.0
2017-10-29 19:55:00 -05:00
Scott Lahteine
723f2a77f6
Implement support for Dual X and Y endstops
2017-10-29 18:56:04 -05:00
Scott Lahteine
e04425281d
Add Dual Steppers / Endstops to configs
2017-10-29 18:56:04 -05:00
Scott Lahteine
edff2c917b
Cleanup for DIGIPOTS settings
2017-10-29 18:56:03 -05:00
Scott Lahteine
3e8754a38a
Add/correct time units on planner vars / M205 B
2017-10-29 18:47:21 -05:00
Scott Lahteine
b2a48f1a04
Provide a SERVO0_PIN for non-standard LCD
2017-10-29 18:36:16 -05:00
Scott Lahteine
b232f39341
AVR: Hidden option to use 8s watchdog
2017-10-29 18:36:16 -05:00
Scott Lahteine
9d4cfd2013
Merge pull request #8142 from thinkyhead/bf2_fix_m303
...
[2.0.x] Fix M303 thermal protection
2017-10-29 04:46:34 -05:00
Scott Lahteine
eae0aea1e0
Fix M303 thermal protection
2017-10-29 04:30:50 -05:00
Luc Van Daele
a1a4fc277e
(2.0.x) serious bug G33 ( #8136 )
...
* (2.0.x) serious bug G33
* Revert config changes
This reverts commit 74b5a98223b7b7fb970d05b8541f4a079c3cfe56.
2017-10-29 04:12:33 -05:00
Thomas Moore
325233b454
Fix automatic stepper assignment for X/Y/Z dual stepper drivers ( #8130 )
2017-10-28 19:45:07 -05:00
Thomas Moore
50b4f9cbf7
LPC1768 Pin Mapping and M43 cleanup ( #8119 )
...
* LPC1768 M43 cleanup
* Update pinmapping.h to #define pins
2017-10-28 19:44:54 -05:00
Scott Lahteine
6b1d1a818b
Revert default BABYSTEP_MULTIPLICATOR to 1
2017-10-27 19:45:44 -05:00
etagle
ba8dc678f5
Arduino Due XON/XOFF implementation
...
Alos includes emergency parser and configurable TX/RX buffers for Arduino Due.
2017-10-27 03:24:23 -05:00
etagle
8d9c3cc2b7
Add a module for Due SRAM-based Interrupt Vector Table
...
This is the ONLY way to be able to override ISRs stolen by the Arduino Runtime, such as Serial or USB device interrupts. This feature is needed so Arduino modules can be replaced and enhanced.
2017-10-27 03:24:23 -05:00
etagle
c9bbef6380
Cosmetic fix for HAL_AVR/MarlinSerial.cpp
...
Instead of using const char, it is better to use uint8_t
2017-10-27 03:24:23 -05:00
LVD-AC
dcfc2503c2
G33 Autotune calibration update #10
2017-10-27 02:11:24 -05:00
Scott Lahteine
b338cafc65
Merge pull request #8111 from thinkyhead/bf2_fwretract_fix_oct26
...
[2.0.x] Improved Firmware Retraction logic
2017-10-27 02:02:06 -05:00
Scott Lahteine
ada90f7335
Clean up trailing spaces
2017-10-26 23:33:43 -05:00
Scott Lahteine
7fad26549b
Concise SD_REPRINT_LAST_SELECTED_FILE description
2017-10-26 23:33:02 -05:00
Scott Lahteine
33f379fe88
Add some Polish language
...
Thanks @SCiunczyk
2017-10-26 22:49:04 -05:00
Scott Lahteine
daeff5a11a
Tweak neopixel self-test
2017-10-26 22:47:07 -05:00
Scott Lahteine
0ceec1f166
Fix leveling_active_at_z warning
2017-10-26 22:22:54 -05:00
studiodyne
eb02f8c719
Improve FWRETRACT logic, add common sense
2017-10-26 22:22:54 -05:00
Scott Lahteine
bd78ca0ee3
Add M290 Babystepping
2017-10-26 20:44:43 -05:00
Scott Lahteine
ce5f0ec85a
Bring STM32 example config up to date
2017-10-26 17:25:44 -05:00
Scott Lahteine
46e9eae159
Tweak to M100 config comment
2017-10-26 17:25:44 -05:00
Scott Lahteine
c45514f811
Merge pull request #8094 from thinkyhead/bf2_neopixel_led_parity
...
[2.0.x] Bring NEOPIXEL_LED into parity with 1.1.x
2017-10-26 17:24:38 -05:00
Bob-the-Kuhn
229a27a1c7
save FLASH by using reduced font for some languages
2017-10-26 16:08:17 -05:00
Roxy-3D
3f5f39576b
Reprint option for last SD Memory card file ( #8106 )
...
* Re-Print of same SD Memory Card file with single click
* Re-Print of same SD Memory Card file with single click
* This is the bugfix-v2.0.0 version of https://github.com/MarlinFirmware/Marlin/pull/8104
2017-10-26 15:50:18 -05:00
Thomas Moore
9e699811d2
Make LPC1768 pinmapping not specific to Re-ARM ( #8063 )
...
* Merging early because of build failures. See #8105
* Make LPC1768 pinmapping not specific to Re-ARM
* Add HAL_PIN_TYPE and LPC1768 pin features
* M43 Updates
* Move pin map into pinsDebug_LPC1768.h
* Incorporate comments and M226
* Fix persistent store compilation issues
* Update pin features
* Update MKS SBASE pins
* Use native LPC1768 pin numbers in M42, M43, and M226
2017-10-26 13:37:26 -05:00
Scott Lahteine
3ac581eac9
Neopixel changes for parity with 1.1.x
2017-10-25 18:40:04 -05:00
jeffyl
7b3098bbd5
Add AZSMZ Mini ( #8005 )
...
* Add AZSMZ Mini
* Remove tabs, adjust spacing
* Renumber boards to group by family
* Patch up spacing
* Tweak
2017-10-25 01:16:54 -05:00
Scott Lahteine
e00ed10c4c
GT2560 config MKS_MINI_12864 => SDSUPPORT
2017-10-25 01:12:48 -05:00
Scott Lahteine
10a5e4d80f
Merge pull request #8078 from thinkyhead/bf2_mks_mini_lcd
...
[2.0.x] Add MKS MINI 12864 support to GT2560
2017-10-25 01:10:03 -05:00
Scott Lahteine
ee9b8bf0f1
Add MKS MINI 12864 support to GT2560
2017-10-24 19:15:41 -05:00
Scott Lahteine
f65fc7ffab
Merge pull request #8044 from thinkyhead/bf2_mesh_consolidate
...
[2.0.x] Simplify mesh bounds config
2017-10-24 18:56:43 -05:00
Scott Lahteine
070cd34fe8
Merge pull request #8077 from thinkyhead/bf2_MKS_BASE_followup
...
Clean up HAL trailing spaces, MKS SBASE pins
2017-10-24 18:38:48 -05:00
Scott Lahteine
7f55d82fd1
Move UBL_SAVE_ACTIVE_ON_M500 to Configuration.h
2017-10-24 18:26:43 -05:00
Scott Lahteine
90a14b4f5b
Clean up HAL trailing spaces, MKS SBASE pins
2017-10-24 18:20:23 -05:00
Thomas Moore
51fafccc16
[2.0.x] Enable hardware serial ports on LPC1768 ( #8004 )
...
* Enable hardware serial ports on LPC1768
* Fix compilation errors with other HALs
* FIx order of includes in LPC1768 HAL main.cpp
* Add support for RX_BUFFER_SIZE and TX_BUFFER_SIZE options in Configuration_adv.h
2017-10-24 17:28:33 -05:00
Scott Lahteine
580b6e9089
Apply physical limits to mesh bounds
2017-10-24 16:54:07 -05:00
Scott Lahteine
4e2baeb3e1
Update indentation, file-wrapping for Marlin 2.0.x
2017-10-24 16:54:06 -05:00
Scott Lahteine
60af705e6d
Relocate SPI.h to the HAL folder
2017-10-24 16:54:06 -05:00
Scott Lahteine
46aae4c6e7
Merge pull request #8074 from thinkyhead/bf2_verbiage_like_8061
...
Fix some config verbiage
2017-10-24 15:25:12 -05:00
Scott Lahteine
3356d5a72d
Merge pull request #8072 from thinkyhead/bf2_fix_M600
...
[2.0.x] Fix position sync in M600 pause/resume
2017-10-24 14:55:46 -05:00
Scott Lahteine
5f87324536
Fix some config verbiage
2017-10-24 14:53:42 -05:00
Scott Lahteine
272f9f65dc
Fix some typos
2017-10-24 14:29:15 -05:00
studiodyne
8181220bfd
Fix position sync in M600 pause/resume
2017-10-24 14:29:15 -05:00
cdedwards
6296ab2173
Add GFX overlay to UBL mesh edit ( #8038 )
...
* Add GFX overlay to UBL mesh edit
Fixed misplaced HAS_TEMP_BED in dogm_bitmaps.h
rename _lcd_babystep_zoffset_overlay to _lcd_zoffset_overlay_gfx and move it out of BABYSTEP_ZPROBE_OFFSET to we can use it for over things. Add this function into UBL mesh edit screen.
update all Configuration.h to add ENABLE_MESH_EDIT_GFX_OVERLAY
* Add Sanity to UBL insanity
Need to check for DOGLCD otherwise error out.
2017-10-24 14:14:03 -05:00
Roxy-3D
72156a2029
change to better (more clear) names ( #8050 )
...
set_destination_to_current() changed to set_destination_from_current()
set_current_to_destination() changed to set_current_from_destination()
2017-10-21 11:42:26 -05:00
Scott Lahteine
0cb423b5b3
Apply consistency for other configs
2017-10-21 00:41:51 -05:00
Scott Lahteine
8c78f8f790
Add Makeboard MINI for Micromake C1
2017-10-21 00:41:51 -05:00
Scott Lahteine
1fbb307aaf
Merge pull request #8021 from thinkyhead/bf2_scroll_longnames
...
[2.0.x] Add SCROLL_LONG_FILENAMES to reveal longer filenames
2017-10-20 21:33:54 -05:00
Scott Lahteine
3d2b2eb1ca
Prevent SDCARD_SORT_ALPHA from exploding
2017-10-20 19:13:21 -05:00
Scott Lahteine
783ddf9691
Add SCROLL_LONG_FILENAMES option
2017-10-20 19:13:21 -05:00
Roxy-3D
5439358281
Basic UBL operations working on 32-bit platforms ( #8024 )
...
* 32-bit work for UBL
* Update FT i3-2020 reference file
2017-10-19 10:44:45 -05:00
Scott Lahteine
9e5cbf0198
BQ should set this in its config, and does
2017-10-18 22:56:03 -05:00
Scott Lahteine
348e5e3109
Simplify Cartesian probing boundaries
...
Followup to #8012
2017-10-18 17:14:32 -05:00
Luc Van Daele
3986a84f77
boolval revisited ( #8016 )
2017-10-18 14:03:17 -05:00
Roxy-3D
572cf0ec95
UBL able to generate mesh and save and load it on 32-bit platforms ( #8015 )
...
* Get UBL Mesh Generation, Mesh Save & Mesh Load working with 32-Bit platforms
* clean up read_data() and write_data() for non-LPC1768 HAL's
* Get read_data() and write_data() return codes consistent
All HAL's read_data() and write_data() return false if they succeed.
* Get read_data() and write_data() return codes to be consistent
Make read_data() and write_data() return true if an error happens.
* Say UBL is now checked out on machine types in default Configuration.h file.
2017-10-18 14:00:29 -05:00
Thomas Moore
67cc29cd3c
Update UBL mesh boundaries to accomidate beds centered at 0, 0 ( #8012 )
2017-10-18 10:03:30 -05:00
Roxy-3D
6cb26c98c8
Fix Baby Stepping on 32-Bit platforms ( #8001 )
...
Also, Max7219 debug code was used for this effort. It has been
improved and hardened.
2017-10-16 16:29:37 -05:00
Scott Lahteine
3b7b0492f8
Merge pull request #7993 from jeffyl/bugfix-2.0.x
...
[2.0.x] Proper support for AZSMZ 12864 LCD on SmartRAMPS
2017-10-16 14:12:29 -05:00
Jeffrey Li
26531f2715
Add lcd to all sample configs
2017-10-16 03:24:25 -07:00
Scott Lahteine
ce48403a0b
Add EXTRA_FAN_SPEED feature
...
Based on #7883 by @studiodyne
2017-10-16 02:34:13 -05:00
Jeffrey Li
eeb4611606
Add proper support for the AZSMZ 12864 LCD on a SMART RAMPS
2017-10-16 00:33:07 -07:00
Scott Lahteine
c46189e429
Fix UBL+Delta segmented feedrate
...
Based on #7948
2017-10-15 16:31:09 -05:00
Scott Lahteine
5c4f3e0107
Add LCD_SET_PROGRESS_MANUALLY
2017-10-15 03:05:29 -05:00
Scott Lahteine
014a83fe09
Merge pull request #7984 from thinkyhead/bf2_micromake_c1
...
[2.0.x] Micromake C1 Configurations, Unaccented French
2017-10-14 21:19:32 -05:00
Scott Lahteine
bc7df0188e
Add Micromake C1 configurations
2017-10-14 20:28:12 -05:00
Scott Lahteine
34a261416f
Add unaccented French language
2017-10-14 20:28:12 -05:00
Scott Lahteine
e587f0893c
Define AVR_ATmega2560_FAMILY_PLUS_70 in Conditionals
2017-10-14 19:05:32 -05:00
Scott Lahteine
fd128b3c93
Fix some AVR HAL code style
2017-10-14 19:05:10 -05:00
Scott Lahteine
799360c576
Enhance Teensy/RAMPS pins files
2017-10-14 18:44:20 -05:00
Scott Lahteine
d3e5a22a5d
Add MIN_SOFTWARE_ENDSTOP_[XYZ] to example configs
2017-10-14 18:44:20 -05:00
Jeff Eberl
b206f70693
Split the software endstop capability by axis.
2017-10-14 18:44:20 -05:00
Scott Lahteine
ec69e97bda
Merge pull request #7974 from jeffyl/bugfix-2.0.x
...
Fix include path for VIKI
2017-10-14 17:38:42 -05:00
Morten
91e28edda6
[2.0.x] Add new board: MKS Sbase ( #7945 )
...
* Add files via upload
* Add files via upload
* Add files via upload
* Checked LCD / edited / revised pins_MKS_BASE.h
As requested :)
* Delete Configuration_adv.h
* Delete Configuration.h
* Deleted /Marlin/Marlin/src/config/examples/MksSbase/*.* and moved them to /Marlin/Marlin/src/config/examples/Mks/Sbase/*.*
* Add files via upload
2017-10-14 09:44:18 -05:00
Jeffrey Li
3c8a3a02ba
Fix include path for VIKI
2017-10-14 04:06:17 -07:00
Scott Lahteine
4586acad8c
Merge pull request #7959 from alexxy/bugfix-2.0.x
...
Python isnt always python2
2017-10-14 05:02:07 -05:00
Scott Lahteine
497f86453e
Merge pull request #7964 from gallynero/patch-2
...
fix 'axis_unhomed_error' not defined error
2017-10-14 05:00:58 -05:00
Scott Lahteine
c0dddd4233
Tweaks to tool_change, GcodeSuite::T()
2017-10-14 02:53:19 -05:00
Scott Lahteine
ca66574062
ADC sensor fix inspired by 'Evgen2' on Twitter
2017-10-14 02:28:13 -05:00
Scott Lahteine
1344ca4b2f
UBL no longer needs ubl_state
2017-10-14 02:18:32 -05:00
Scott Lahteine
8dd08425fd
Improve LCD leveling edits
2017-10-14 02:18:31 -05:00
Scott Lahteine
3e3911fb81
Use planner.leveling_active for all leveling systems
2017-10-14 02:18:31 -05:00
Scott Lahteine
32c607ffe2
Ensure fade factor is recalculated if fade height changes
2017-10-14 02:18:31 -05:00
Scott Lahteine
ca1e47375c
Move fade_scaling_factor_for_z to Planner
2017-10-14 02:18:31 -05:00
Scott Lahteine
9a930ebec2
Make leveling_is_active a macro
2017-10-14 02:18:31 -05:00
Scott Lahteine
58abc66c1d
Tweak bed leveling conditionals
2017-10-14 02:18:31 -05:00
