Commit Graph

1251 Commits

Author SHA1 Message Date
Scott Lahteine
af4c62b422 Update product links 2019-12-15 20:58:31 -06:00
Luu Lac
f3155af444 Update AZSMZ LCD link (#16106) 2019-12-06 01:35:06 -06:00
Felicia Hummel
690ed531b6 Configurable PSU power-on delay (#16050) 2019-11-30 07:17:24 -06:00
Scott Lahteine
441e822fb3 LULZBOT_TOUCH_UI => TOUCH_UI_FTDI_EVE 2019-11-23 17:04:17 -06:00
Scott Lahteine
bdd366b97c Update sensor -5 label 2019-11-21 04:57:57 -06:00
Bob
751cd1f533 MAX31865 temperature sensor (#15930) 2019-11-21 03:15:10 -06:00
Scott Lahteine
47e4e5f1db Update thermocouple comments 2019-11-20 23:51:51 -06:00
Scott Lahteine
7e9c846ec3 Modify comment for unlimited E steppers 2019-11-13 01:45:50 -06:00
InsanityAutomation
0074d63962 Vendor version override (#14189)
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com>
2019-10-15 12:32:44 -05:00
Matthew Piercey
ac8083588b Add config for Wanhao Duplicator i3 v2.1 2019-10-11 00:59:58 -05:00
Roxy-3D
2cf35267c4 Set Junction Deviation value from Jerk and Default Acceleration (#15509)
Formula: `0.4 * sq(min(xjerk, yjerk)) / (default accel)`
2019-10-10 19:44:15 -05:00
Scott Lahteine
b4d48fdc91 Followup to #15481 2019-10-08 21:38:02 -05:00
Scott Lahteine
89490171ef Use "concatenatable" language codes 2019-10-08 20:17:23 -05:00
Scott Lahteine
c0005e939c
Enable junction deviation by default (#15481) 2019-10-08 19:42:18 -05:00
InsanityAutomation
438835f6a5 Configurable Max Accel, Max Feedrate, Max Jerk edit limits (#13929) 2019-10-01 19:59:48 -05:00
InsanityAutomation
e9cf46a9a5 M851 XY 3 point followup (incomplete) (#15361) 2019-09-25 02:43:41 -05:00
InsanityAutomation
df1e51258a Add M851 X Y probe offsets (#15202) 2019-09-24 21:29:21 -05:00
Tanguy Pruvot
d277e93f4d Configurable TOUCH_BUTTONS repeat delays (#15245) 2019-09-16 21:32:55 -05:00
Scott Lahteine
3648bce886 Tweak NOZZLE_CLEAN_START_POINT spacing 2019-09-11 01:50:24 -05:00
Scott Lahteine
cff502c6d4 Tweak REPRAPWORLD_KEYPAD config comment 2019-09-04 17:23:38 -05:00
Scott Lahteine
87b16ed5f6 Bring Configuration.h up to date 2019-08-31 07:03:51 -05:00
Robby Candra
38983fdfa9 Add 'Back' Button for Touch TFT 320x240 (#15060) 2019-08-29 01:19:07 -05:00
Scott Lahteine
3ac76f0489
Invariant Marlin bootscreen (#15057) 2019-08-28 07:40:18 -05:00
Scott Lahteine
d6a16525c2
New Language: Vietnamese (#13892) 2019-08-24 03:40:28 -05:00
MaukCC
8664b8e97b Adding HMS434 machine (#14931) 2019-08-20 03:40:48 -05:00
Scott Lahteine
bc93ac53b5 Fix #define typo in configs 2019-08-18 19:51:55 -05:00
Marcio Teixeira
274934ad81 Add LULZBOT_TOUCH_UI (#14967) 2019-08-16 18:34:13 -05:00
Tim Moore
e3660bca25 Overlord printer thermistor (#14815) 2019-08-03 20:57:56 -05:00
Scott Lahteine
e85eca2630 HAL cleanup, Teensy 3.1 platform 2019-08-02 07:22:26 -05:00
Tim Moore
940c59d9da Overlord i2c LCD with LEDs and buzzer (#14801) 2019-08-02 06:19:45 -05:00
Robby Candra
128eed6b57 Option to reverse select direction/buttons (#14693) 2019-07-30 17:42:57 -05:00
Scott Lahteine
bc58e678bd More general FSMC display option 2019-07-30 04:25:55 -05:00
Scott Lahteine
c942ca130f More general TOUCH_BUTTONS comment 2019-07-30 04:22:27 -05:00
mikeshub
1579091c20 PID loop improvements (#14746)
* Fix macro evaluation in `temperature.cpp`
* Improve bed PID, PID debug output
* Add min PID power define
2019-07-28 15:50:25 -05:00
Tim Moore
e5aa453293 Add support for 2 Neopixel strips (#14667) 2019-07-20 23:14:09 -05:00
wookie666
00e2f6da8f Improve magnetic dock switching toolhead (#14663) 2019-07-19 06:07:26 -05:00
Tanguy Pruvot
81d629bc47 Robin & Longer3D SPI TFT driver (#14595) 2019-07-14 18:16:26 -05:00
InsanityAutomation
d2f20803ba Allow nozzle clean with limited Axis (#14619) 2019-07-14 06:58:53 -05:00
Scott Lahteine
3218c4b33f Shorten some config descriptions 2019-07-11 05:45:27 -05:00
Scott Lahteine
84d0bc5c17 OLED LCD section 2019-07-08 23:58:04 -05:00
Vanessa Dannenberg
4fa8053638 RPW-Ultra thermistor table (#14517) 2019-07-05 20:37:05 -05:00
Tim Moore
eb6dec03bd Simplify power supply naming logic (#14488)
Co-Authored-By: Tim Moore <tim.moore@lightbend.com>
Co-Authored-By: AnHardt <github@kitelab.de>
2019-07-05 01:58:34 -05:00
Aliaksei Kvitsinski
2f932a11b3 Park heads with electromagnet (#14023) 2019-07-01 05:55:23 -05:00
thisiskeithb
4b9f6d531b Add links to Junction Deviation heading (#14272) 2019-07-01 01:17:53 -05:00
Tanguy Pruvot
24655a6bf3 Touch-MI Menu and Manual Deploy option (#14290) 2019-06-30 23:55:27 -05:00
Scott Lahteine
93cd66ac11 Tweaky change from (C) to (c) 2019-06-27 23:58:16 -05:00
Tim Moore
8ce84fa44f Add temperature-based auto power options (#14397) 2019-06-27 16:28:07 -05:00
MrMabulous
c41b005f33 Add Extra Probing option, discarding outliers (#14338) 2019-06-21 19:02:26 -05:00
Tobias Frost
eeaef2410a Support DGUS Display with DWIN OS (#13253) 2019-06-21 04:47:23 -05:00
Scott Lahteine
a31cb910f5 Tweak some config spacing 2019-06-20 21:08:47 -05:00
Scott Lahteine
4df4c47994
Add TMC2209 support (#14249) 2019-06-20 15:47:50 -05:00
Tanguy Pruvot
ed0c70f0a0 SKRmini followup - Fysetc config updates (#14327) 2019-06-20 05:49:27 -05:00
Scott Lahteine
aacb904e1f Adjust some config comments 2019-06-17 20:22:07 -05:00
Tanguy Pruvot
f2cfa408b7 Touch-MI probe by hotends.fr (#14101)
A simple Z probe using a magnet to deploy a probe. See https://youtu.be/E7Ik9PbKPl0 for the sensor description...
2019-06-14 22:19:48 -05:00
InsanityAutomation
b7eeb5b13b Move BLTouch options to adv config (#14131)
Plus other BLTouch and menu enhancements.
2019-06-10 17:46:42 -05:00
InsanityAutomation
f6ec00d776 Update thermistor and working config 2019-06-04 20:25:00 -04:00
InsanityAutomation
49e83dd7c8 BLTouch V3.1 changes (#14104) 2019-05-25 21:56:47 -05:00
Scott Lahteine
14fe41f6b2 Update Z probe offset comment 2019-05-25 19:41:15 -05:00
Bob Kuhn
1dad6e754b Neopixel background LED option (#14025) 2019-05-18 02:36:37 -05:00
InsanityAutomation
6811e2921b BLTouch v3 / 3DTouch Interoperability & performance (#13814) 2019-05-07 21:25:54 -05:00
InsanityAutomation
5dcb25664f Option to Auto-Initialize EEPROM (#13935) 2019-05-07 16:30:31 -05:00
doggyfan
23a8707ef1 Configurable Thermistor (#13888) 2019-05-06 18:51:06 -05:00
Giuliano Zaro
e2a77ed881 Bring chamber temp to completion (#13837) 2019-05-04 22:51:47 -05:00
Scott Lahteine
bf54251a10
Finish, improve, clean up FYSETC_MINI_12864 revisions (#13871) 2019-05-01 20:05:29 -05:00
Scott Lahteine
9372e2603c Simpler neopixel comment 2019-05-01 13:55:51 -05:00
Scott Lahteine
6ff81a33c1 Provide JSON values for SOFT_PWM_SCALE 2019-04-22 14:06:14 -05:00
Bob Kuhn
81ca5a4cd4 Fix and improve FYSETC LCD support (#13767) 2019-04-21 20:48:53 -05:00
Robby Candra
7ca1fea22b Option to pause probe deployment only when triggered, for manually-deployed allen-key probe (#13698) 2019-04-16 01:32:43 -05:00
Stephan
84273557f9 Move and update heated chamber settings (#13671)
Co-Authored-By: the-real-orca <stephan.veigl@gmail.com>
2019-04-12 15:38:10 -05:00
chai-md
2adc37becc MAGNETIC_SWITCHING_TOOLHEAD (#13629) 2019-04-11 13:29:17 -05:00
Scott Lahteine
5018fdacbe
Support FYSETC_MINI_12864_PANEL (#13365) 2019-04-09 18:34:29 -05:00
Scott Lahteine
a2b3ad6d0a Don't override RGB LED pins, by default 2019-04-07 16:42:26 -05:00
Scott Lahteine
3221658a78 Adjust park position description 2019-04-05 20:40:50 -05:00
Scott Lahteine
b46ca9aa94 Less timely comment, tweak conditions 2019-03-26 19:20:13 -05:00
InsanityAutomation
eb91f08725 Update descriptions and dont call unneeded functions 2019-03-26 11:24:52 -04:00
drzejkopf
70e6a3db8a Add LEVEL_CORNERS_HEIGHT to LEVEL_BED_CORNERS (#13439) 2019-03-20 18:26:12 -05:00
InsanityAutomation
691e5c3bb8 BLTouch V3.0 support (#13406) 2019-03-17 05:57:25 -05:00
Scott Lahteine
49cf92dc36
Extended condition macros (#13419)
Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`
2019-03-16 23:43:06 -05:00
Andrei Pozolotin
31ff7da7ac Add missing CHAMBER options (for M141) (#13371) 2019-03-11 16:50:07 -05:00
Scott Lahteine
98b55421a5 Clean up some temp config 2019-03-11 16:31:23 -05:00
InsanityAutomation
d54741eda8 Update some G26 plausible values. Add speed control. (#13330) 2019-03-08 03:13:44 -06:00
3dlabsio
645ca7af7a M141 Heated Chamber, Temperature rework (#12201) 2019-03-07 02:09:39 -06:00
Scott Lahteine
99d0022fae
Drop the Z_MIN_PROBE_ENDSTOP option (#13276) 2019-03-01 00:27:45 -06:00
InsanityAutomation
e2e2a55d9b Add thermistor type 67 SliceEng (#13275) 2019-02-28 19:44:17 -06:00
Scott Lahteine
d2bdb71c13
Add PHOTO_GCODE option, photo trigger physical move (#13168) 2019-02-14 15:09:35 -06:00
InsanityAutomation
7f1b69b0c8 Add HOST_PROMPT_SUPPORT (#13039) 2019-02-12 15:55:47 -06:00
Scott Lahteine
0feeef2604 Update copyright in headers 2019-02-12 15:30:11 -06:00
Scott Lahteine
6de3d34378
M166 Gradients, LCD Menu for 2-channel Mixer (Geeetech A10M/A20M) (#13022) 2019-02-10 04:54:23 -06:00
LinFor
7ee35c2611 PID_MENU option to save PROGMEM in LCD menus (#13095) 2019-02-10 04:03:18 -06:00
Scott Lahteine
f3b6cb4d34 Clean up, update config comments 2019-02-08 15:13:52 -06:00
teemuatlut
d81342254a Support new TMC drivers (#13026) 2019-02-06 06:33:14 -06:00
Rolf Werum
524c6c10bf MAGNETIC_PARKING_EXTRUDER (#12351) 2019-02-06 06:30:53 -06:00
Marcio Teixeira
5cfc1cdacc Support SWITCHING_NOZZLE with 2 servos (#13054) 2019-02-04 00:19:56 -06:00
revilor
6a57d0b381 Prusa MMU2 (#12967) 2019-01-31 19:10:52 -06:00
Marcio Teixeira
f214118e45 Action to notify host of filament runout. (#12817) 2019-01-27 20:18:05 -06:00
mikeshub
7fde8d9d1e Add CreatorPro / Makerbot / QIDI / etc and Mightboard RevE support (#12855)
- Fix a bug in MAXxxxx thermocouple temp reporting.
- Add support for 3-wire HD44780.
- Add support for PCA9533 RGB driver.
- Add configuration examples for FlashForge CreatorPro.
2019-01-14 14:29:55 -06:00
Ondřej Nový
a0ef6198ff Level bed corners Z-hop height option (#12858) 2019-01-10 19:15:17 -06:00
jmz52
813a4ea107 Add support for Mks Robin TFT display (#12706)
* Add support for MKS Robin TFT display

- Add support for MKS Robin TFT display and encoder for MKS Robin board.
- Generic 128x64 UI with x2 upscale is used (for now).
- Tested on MKS Robin TFT V2.0 with ST7789V controller.
2019-01-03 10:38:39 -06:00
Ludy
cfc5e96b4b Move JD to Config.h (and fix jerk->eeprom bug) (#12720) 2018-12-27 15:29:39 -06:00
InsanityAutomation
367a9f65aa Add Formbot 350c Thermistor (#12661) 2018-12-20 17:04:17 -06:00
Ludy
a7b3a61424 Improve some config comments readability (#12615) 2018-12-09 19:02:42 -06:00
Scott Lahteine
4388015f1a Tweak config formatting 2018-12-07 16:57:14 -06:00
InsanityAutomation
6471a75a22 Combine more tool-change variables (#12137) 2018-11-06 22:22:20 -06:00
KangDroid
82ff7c6542 Add a mesh edit menu for MBL / ABL-Bilinear 2018-11-04 19:07:47 -06:00
Scott Lahteine
9cd3529108 Organize language data, fix Korean and Danish 2018-10-30 20:41:16 -05:00
Scott Lahteine
9e663a624b Apply #pragma once to configuration files 2018-10-30 18:35:12 -05:00
Chris Rigter
3028a620af Add RACK_AND_PINION_PROBE (#12218) 2018-10-26 18:24:24 -05:00
Scott Lahteine
e229b831fa Customizable preheat labels 2018-10-23 00:57:50 -05:00
Scott Lahteine
67a3c5a16a
Alternative info screen (Prusa-style) (#12132)
* Fix Z value display
* Add HAS_PRINT_PROGRESS
* Alternative Info Screen option
* Add LCD_INFO_SCREEN_STYLE to example configs
2018-10-18 11:34:52 -05:00
InsanityAutomation
3ec3872730 Single Z raise value for all tool-changing / parking (#12090)
* Universal tool-change Z lift
* Add TOOLCHANGE_ZRAISE to example configs
* Park/unpark changes to example configs
* Implement DEBUG_DXC_MODE
2018-10-17 11:11:41 -05:00
Marcio Teixeira
056561df93 [2.0.x] Enhancements to FILAMENT_RUNOUT_SENSOR (#12069)
- Added FILAMENT_RUNOUT_DISTANCE_MM option
- Added FILAMENT_MOTION_SENSOR option
2018-10-16 07:28:52 -05:00
Scott Lahteine
951b25163e
Extend M217 with configurable park/raise (#12076) 2018-10-13 23:08:20 -05:00
Scott Lahteine
af3bf6c956 Tweak config spacing 2018-10-12 16:09:27 -05:00
Marcio Teixeira
906a24fa81 Extensible user interface API (#11193) 2018-10-08 15:44:05 -05:00
InsanityAutomation
ee253991d4 Various fixups for single-nozzle filament swap (#12036) 2018-10-08 15:39:55 -05:00
Sam Lane
f2ecf8d510 Add option to control Solenoids under PARKING_EXTRUDER (#12028) 2018-10-07 17:07:12 -05:00
InsanityAutomation
74cd6cb4fc Single nozzle filament change (#11994) 2018-10-07 17:06:14 -05:00
Scott Lahteine
bb561baf9e Tweak some config comments 2018-10-04 02:42:12 -05:00
brian park
2abf3d258d Korean language translation support (#11987) 2018-10-03 01:53:34 -05:00
Scott Lahteine
e3f7b69105
Add PROBING_STEPPERS_OFF (#11984)
Co-Authored-By: houseofbugs <houseofbugs@gmail.com>
2018-10-02 05:13:58 -05:00
Scott Lahteine
0e5bcdf695 Make DISABLE_INACTIVE_EXTRUDER a simple switch 2018-10-02 04:57:03 -05:00
Scott Lahteine
aa6e8e9325 Tweak some config comments 2018-09-25 13:42:28 -04:00
Scott Lahteine
5490a664f5
Expose: Homing Validation and Endstop Noise Threshold (#11912) 2018-09-24 21:59:12 -04:00
Scott Lahteine
6742026568 Followup for 6 extruders 2018-09-24 14:36:50 -04:00
Scott Lahteine
04bdff4115 Add a blank line 2018-09-24 12:49:02 -04:00
Scott Lahteine
217e0efd20
General option PAUSE_BEFORE_DEPLOY_STOW (#11905) 2018-09-24 00:43:43 -04:00
Scott Lahteine
849dea92a8 Move probe extras below probe types 2018-09-23 23:23:07 -04:00
Hannes Brandstätter-Müller
a4cdffdd69 Support for manually deployed fixed probes (#11899) 2018-09-23 19:59:08 -04:00
Scott Lahteine
bae8f82ba8
[2.0] Fix Mixing Extruder mixing factors (#11861) 2018-09-18 01:10:41 -05:00
Scott Lahteine
f5c210d33d Config changes supporting up to 6 extruders 2018-09-16 22:22:35 -05:00
Holger Müller
1a6f2b29b8 Add support for Triple-Z steppers/endstops 2018-09-16 00:35:58 -05:00
Kevin
e25d2ae4a2 [2.0.x] SWITCHING_TOOLHEAD (#11623) 2018-09-08 01:43:24 -05:00
Scott Lahteine
2a61c9a939 Various fixups to configs, spacing, etc. 2018-09-06 06:44:31 -05:00
Scott Lahteine
3e81745e81 Fix issues, make optional 2018-08-29 17:58:02 -05:00
Scott Lahteine
66966dbd69 Tweak comments for newer multiplexer 2018-08-25 17:00:49 -05:00
Kevin
6483285bc5 HOTEND_OFFSET_Z always available (#11603) 2018-08-22 00:21:29 -05:00
Scott Lahteine
bd6d032628 Update default driver configuration
Co-Authored-By: teemuatlut <teemu.mantykallio@live.fi>
2018-08-14 18:42:04 -05:00
Scott Lahteine
846bd24eb9 MALYAN_LCD is ok without SD 2018-08-14 05:31:47 -05:00
Greg Nutt
a1a5367380 Smoothieboard V1.0/1.1 and A5984 support 2018-08-09 23:03:17 -05:00
Giuliano
bd3ec66a78 [2.0.x] typo fix (#11365)
Typo fix
2018-07-25 18:00:47 -05:00
teemuatlut
fbcdf5eaeb Simplify stepper driver per-axis selection 2018-07-25 02:47:43 -05:00
Scott Lahteine
14e2b11195 Fix spelling in configs 2018-07-24 21:03:38 -05:00
Scott Lahteine
2106fa26b1 Add MANUAL_PROBE_START_Z for manual probing 2018-07-18 21:49:20 -05:00
Scott Lahteine
25e2ca8896 Add Z_CLEARANCE_MULTI_PROBE
Co-Authored-By: nightgryphon <ngryph@gmail.com>
2018-07-12 22:46:34 -05:00
Chris Pepper
cbea385ed7 [2.0.x] Fix LCD_LANGUAGE options list formatting in config (#11198)
* Fix LCD_LANGUAGE options list formatting in config
* Remove 'cn' language option from list
2018-07-04 17:42:14 -05:00
Scott Lahteine
568cfe7caa Add thermistor 501 (100K Zonestar) 2018-07-03 17:52:06 -05:00
etagle
6f14bcaa3e Add MAXIMUM_STEPPER_RATE, enforce in multi-stepping
The timing value should be properly set for ALL boards. The compiler will check and set maximum step rate calculations based on those values.
2018-06-10 16:02:47 -05:00
Scott Lahteine
aaaf09bda2 BEZIER_JERK_CONTROL => S_CURVE_ACCELERATION 2018-05-26 18:33:51 -05:00
Scott Lahteine
4b2f6e3b2b
[2.0.x] Add endstop noise filter (#10796) 2018-05-21 15:51:38 -05:00
Scott Lahteine
b7dfc79988
Disable SERIAL_PORT_2 by default and sanity-check it (#10748) 2018-05-14 21:38:24 -05:00
Scott Lahteine
e978e6e782
[2.0.x] Arrange LCD options by type (#10630) 2018-05-06 19:16:55 -05:00
nightdemonx
e911635fb1 Add thermocouple with AD8495 support 2018-05-02 08:43:16 -05:00
Scott Lahteine
b7e938a9fb LCD_BED_LEVELING enables a sub-menu for ABL 2018-05-01 07:13:56 -05:00
Scott Lahteine
c87b0e21be Add units to probe speed comments 2018-04-30 23:50:28 -05:00
Scott Lahteine
05c33833e7
[2.0.x] Add NO_LCD_MENUS option (#10582) 2018-04-30 21:16:31 -05:00
Scott Lahteine
9e07df5c1b
Extra options for LEVEL_BED_CORNERS (#10483) 2018-04-22 02:50:48 -05:00
Scott Lahteine
a90cbc6339
[2.0.x] Wait for bed heaters between probing (#10472) 2018-04-21 15:43:21 -05:00
KangDroid
6c535081ec [2.0.x] Add optional menu item to toggle software endstops (#10389) 2018-04-13 00:24:09 -05:00
Yunhui Fu
c96412a78f [2.0.x] UTF-8 language translation support (#10213) 2018-04-12 20:14:01 -05:00
Scott Lahteine
8b8ad14178 Add Z_PROBE_LOW_POINT to prevent damage 2018-04-09 17:23:03 -05:00
Scott Lahteine
dca69efc11 Update Bed PID comments 2018-04-08 06:44:47 -05:00
etagle
a29adde5c0 Implement BEZIER_JERK_CONTROL
Enable 6th-order jerk-controlled motion planning in real-time.
Only for 32bit MCUs. (AVR simply does not have enough processing power for this!)
2018-04-07 21:03:28 -05:00
Lenbok
0e8242180d Chamber temperature monitoring and auto fan control.
This is an initial cut for feedback, updated for 2.0.x.

Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?

Chamber temperatures are not reported on the LCD in any way.

When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.

As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
2018-04-06 23:09:06 -05:00
Scott Lahteine
adcb87f0db Z Endstop Servo => Z Probe Servo 2018-04-01 23:54:21 -05:00
Scott Lahteine
dd2949922b Consolidate 3-point leveling point options 2018-03-19 04:12:20 -05:00
Scott Lahteine
c6ff39cc14 Spacing cleanup 2018-03-17 16:49:08 -05:00
Scott Lahteine
14c03cb6f4
[2.0.x] Make MIN_PROBE_EDGE a general option (for electronic probes) (#10069)
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
2018-03-13 01:15:22 -05:00
Scott Lahteine
28f1276286
[2.0.x] Add Z_AFTER_PROBING option (#10058)
Some "fix-mounted" probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
2018-03-11 13:07:55 -05:00
Scott Lahteine
419d12ca1b Add UNKNOWN_Z_NO_RAISE option
With this option enabled, Z won't ever be raised until after `G28` has been completed, and it won't raise if Z becomes unknown. This is good for machines whose beds fall when Z is powered off.
2018-03-10 00:17:34 -06:00
Scott Lahteine
a2a672449a Updated boot screen description 2018-03-03 20:04:17 -06:00
Scott Lahteine
4953fb1c88 Standardize encoder defaults 2018-02-24 22:34:45 -06:00
Scott Lahteine
5684beae90 Bring some configs up to speed 2018-02-24 21:56:27 -06:00
Scott Lahteine
2024775e07
Spanish (UTF8) Language (#9786)
From #7314 by @MrAmericanMike
2018-02-23 20:24:02 -06:00
Scott Lahteine
b2cf253a13 Add RESTORE_LEVELING_AFTER_G28 option 2018-02-23 13:38:54 -06:00
Marcio Teixeira
13176dfe2f Merge remote-tracking branch 'origin/pr-lite-st7920-status' into pr-lite-st7920-status 2018-02-22 08:02:31 -07:00
Marcio Teixeira
716a22498f Changed temp type from uint8_t to int16_t
- Also deleted old implementation files which had been renamed.
2018-02-21 10:15:55 -07:00
Scott Lahteine
7d8c6b3f3c
Add 20x4 option for Sainsmart LCD (#9740) 2018-02-21 00:46:25 -06:00
Marcio Teixeira
aada1e698f Removed unused configuration options. 2018-02-19 16:14:33 -07:00
Marcio Teixeira
c7513eb032 Merge branch 'pr-lite-st7920-status' of github.com:marcio-ao/Marlin into pr-lite-st7920-status 2018-02-19 15:38:13 -07:00
Studiodyne
d3ca82d8c2 Support for multiple filament runout sensors 2018-02-19 07:02:50 -06:00
Scott Lahteine
ca55f2927a
Pulldown pin mode support (#9701)
Implemented for LPC1768.
2018-02-18 19:26:23 -06:00
Scott Lahteine
79272f98fc Proposed changes to ST7920 lightweight status screen 2018-02-18 02:47:31 -06:00
Marcio Teixeira
24eb275b99 Added a light-weight status screen for the ST7920
- The status screen uses the ST7920 character generator to greatly
  reduce SPI traffic and MCU load when updating the status screen.

- Has been tested with the RepRapDiscount Full Graphics Smart Controller
  but should work with any LCD that uses an ST7920 or fully compatible
  controller.
2018-02-18 02:29:45 -06:00
Scott Lahteine
08d685c97a Followup to 21e60fd 2018-02-16 02:09:17 -06:00
Roxy-3D
21e60fd3ed
Allow user to control Z-Height correction for off mesh movements (#9661) 2018-02-15 15:07:42 -06:00
Marcio Teixeira
4880ac6533 Added a light-weight status screen for the ST7920
- The status screen uses the ST7920 character generator to greatly
  reduce SPI traffic and MCU load when updating the status screen.

- Has been tested with the RepRapDiscount Full Graphics Smart Controller
  but should work with any LCD that uses an ST7920 or fully compatible
  controller.
2018-02-14 14:43:54 -07:00
Scott Lahteine
2ec65051fd Fix serial comment sp. 2018-02-13 22:40:56 -06:00
Scott Lahteine
2014d38e10 NEOPIXEL_BRIGHTNESS parity 2018-02-08 18:55:19 -06:00
Scott Lahteine
b5e92f4f90
[2.0.x] Enable / disable PSU automatically (#9503) 2018-02-06 00:22:30 -06:00
Scott Lahteine
16739264d3 Add UltiController v2.1 support
Add compatibility with the original screen bord from Ultimaker 2 printer (UltiController v2.1 with the PG-2864ALBP I2C display)
2018-02-05 22:30:03 -06:00
Scott Lahteine
4925f60cff Add MALYAN_LCD to configs 2018-02-04 18:52:44 -06:00
Scott Lahteine
7d6c009104 Add thermistor 15 tuned for JGAurora A5 2018-01-22 01:27:11 -06:00
Scott Lahteine
348b454401 Probe bounds based on bed size 2018-01-22 01:05:11 -06:00
Scott Lahteine
58ed9901d7 Consistent NEOPIXEL_TYPE options 2018-01-21 17:19:38 -06:00
Scott Lahteine
fa432508b0 Followup to Ender config 2018-01-15 06:00:21 -06:00
Scott Lahteine
048486390e Bring some configs up to date 2018-01-11 01:10:17 -06:00
Thomas Moore
f7efac57b7 Multi-host support 2018-01-10 00:14:47 -06:00
GMagician
5295b4713d [2.0.x] add semitec 104NT-4 (#9119)
Table is very very similar to old 104-GT2 so I added only the name and recycled old ID
2018-01-09 16:53:12 -06:00
Scott Lahteine
0b4a46fa6c Bring configs up to date with 1.1.x 2017-12-30 23:28:53 -06:00
Thomas Moore
f0a8a1a853 [2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8866)
* Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
2017-12-25 01:38:06 -06:00
Scott Lahteine
28fc8741d6 Reduce default jerk. XY by half. Z by 1/4 2017-12-24 19:54:11 -06:00
Even
ea1a8d1223 add original RADDS LCD + Controller
adds setup for the original Radds Display+Controller+SD Card Reader PCB
http://doku.radds.org/dokumentation/lcd-display/
2017-12-24 19:00:23 -06:00
Dan Delaney
b055d8c39c [2.0.x] Adding support for using the MKS_12864OLED with the SSD1306 controller (#8814)
* Adding support for using the MKS_12864OLED with the SSD1306 controller

* Update comment for correct controller type
2017-12-16 18:47:04 -06:00
Scott Lahteine
15d05748df Adding support for the Tronxy and Zonestar LCD 2017-12-15 19:13:52 -06:00
Scott Lahteine
69d49a2438 Shorter segments may be better 2017-12-09 06:29:14 -06:00
Scott Lahteine
ae663a4198 PROBE_DOUBLE_TOUCH => MULTIPLE_PROBING 2017-12-07 16:44:13 -06:00
Richard Wackerbarth
c1184552ac Change K1 to required option PID_K1 2017-12-05 19:59:59 -06:00
Scott Lahteine
aa7efb96bf Bring configurations up to date 2017-12-02 21:50:51 -06:00
Scott Lahteine
0154e3480c New feature: BED_SKEW_CORRECTION 2017-12-01 19:39:49 -06:00
Scott Lahteine
ef2531558c Add an option to segment leveled moves 2017-11-29 16:57:30 -06:00
Scott Lahteine
5926c9c97b Followup for MESH_EDIT_GFX_OVERLAY 2017-11-24 15:53:25 -06:00
Scott Lahteine
5ce7f23afa Config option G26_MESH_VALIDATION for all meshes 2017-11-23 21:43:23 -06:00
Scott Lahteine
3f0a982b8c Move Filament Width Sensor to Configuration_adv.h 2017-11-13 21:05:57 -06:00
Scott Lahteine
b76e173205 Move test extrusion options under G26 2017-11-13 21:05:57 -06:00
Scott Lahteine
81b91b3f9d Clean up some trailing white-space 2017-11-10 02:31:04 -06:00
Roxy-3D
967104e1ce
Default Extrusion Settings were off a few lines in some of the example config files. (#8333) 2017-11-08 11:56:00 -06:00
Roxy-3D
ed62c621d7
Fix G26 Circle Drawing. Add Default Extrusion Settings (#8313)
- Fix G26 Circle Drawing.
- Add default extrusion settings so machine can print lines on print bed
- Yet to be done: Get LCD Menu's to use these settings.
2017-11-07 17:13:53 -06:00
Scott Lahteine
2c099fd4c2 Update Thermal Protection Documentation 2017-11-07 15:46:44 -06:00
Scott Lahteine
d83a9a53e8
Merge pull request #8220 from thinkyhead/bf2_serial_port_-1
[2.0] Add SERIAL_PORT -1 option for configurators
2017-11-03 15:25:12 -05:00
Scott Lahteine
93ba72ea83 Add SERIAL_PORT -1, set on SBASE, STM32F103RET6 2017-11-03 15:22:45 -05:00
Scott Lahteine
7e43dd1d23 Fix probes configuration url
Based on #8241 by @machaj
2017-11-03 13:35:40 -05:00
android444
9cc1d8e312 [2.0.x] Support for SilverGate Board 2017-10-31 15:27:26 -05:00
Scott Lahteine
34be5d33c0 The plural of 'axis' is 'axes' 2017-10-30 14:21:43 -05:00
Scott Lahteine
7fad26549b Concise SD_REPRINT_LAST_SELECTED_FILE description 2017-10-26 23:33:02 -05:00
Scott Lahteine
46e9eae159 Tweak to M100 config comment 2017-10-26 17:25:44 -05:00
Scott Lahteine
7f55d82fd1 Move UBL_SAVE_ACTIVE_ON_M500 to Configuration.h 2017-10-24 18:26:43 -05:00
Scott Lahteine
580b6e9089 Apply physical limits to mesh bounds 2017-10-24 16:54:07 -05:00
Scott Lahteine
5f87324536 Fix some config verbiage 2017-10-24 14:53:42 -05:00
cdedwards
6296ab2173 Add GFX overlay to UBL mesh edit (#8038)
* Add GFX overlay to UBL mesh edit

Fixed misplaced HAS_TEMP_BED in dogm_bitmaps.h

rename _lcd_babystep_zoffset_overlay to _lcd_zoffset_overlay_gfx and move it out of BABYSTEP_ZPROBE_OFFSET to we can use it for over things. Add this function into UBL mesh edit screen.

update all Configuration.h to add ENABLE_MESH_EDIT_GFX_OVERLAY

* Add Sanity to UBL  insanity

Need to check for DOGLCD  otherwise error out.
2017-10-24 14:14:03 -05:00
Roxy-3D
572cf0ec95 UBL able to generate mesh and save and load it on 32-bit platforms (#8015)
* Get UBL Mesh Generation, Mesh Save & Mesh Load working with 32-Bit platforms

* clean up read_data() and write_data() for non-LPC1768 HAL's

* Get read_data() and write_data() return codes consistent

All HAL's read_data() and write_data() return false if they succeed.

* Get read_data() and write_data() return codes to be consistent

Make read_data() and write_data() return true if an error happens.

* Say UBL is now checked out on machine types in default Configuration.h file.
2017-10-18 14:00:29 -05:00
Jeffrey Li
eeb4611606 Add proper support for the AZSMZ 12864 LCD on a SMART RAMPS 2017-10-16 00:33:07 -07:00
Scott Lahteine
014a83fe09 Merge pull request #7984 from thinkyhead/bf2_micromake_c1
[2.0.x] Micromake C1 Configurations, Unaccented French
2017-10-14 21:19:32 -05:00
Scott Lahteine
34a261416f Add unaccented French language 2017-10-14 20:28:12 -05:00
Jeff Eberl
b206f70693 Split the software endstop capability by axis. 2017-10-14 18:44:20 -05:00
Slawomir Ciunczyk
a11e6a1022 Different NEOPIXEL types
Same as #7728 but for 2.0.x,
Lot of cleanup and remove references in whole code to other "LED files" than leds.h. Now will be much easier to add next drivers/libraries. e.g. FastLED. But bad news, currently FastLED is suporting only RGB devices (no RGBW)
2017-10-10 02:17:36 -05:00
Scott Lahteine
e9bcb9d048 Add 4 new LCD displays 2017-10-09 15:58:02 -05:00
Scott Lahteine
9fe7f53216 Misc general spacing cleanup 2017-10-06 15:14:01 -05:00
Scott Lahteine
508d764d63 Add serial XON/XOFF handshaking
From @ejtagle, originally #7459
2017-10-02 04:12:30 -05:00
Scott Lahteine
90af1fe5ee Implement NO_MOTION_BEFORE_HOMING option 2017-10-01 21:58:50 -05:00
Christopher Pepper
bea3ec2724 M355 S0, S1 fixes & faster LCD, SD card
fix Travis error
2017-09-27 19:26:00 -05:00
Scott Lahteine
7cd5eb6d42 Update LEVEL_BED_CORNERS config option 2017-09-27 00:48:59 -05:00
Scott Lahteine
4c5be9bb05 Fix a PARKING_EXTRUDER comment 2017-09-27 00:48:58 -05:00
Scott Lahteine
494b0eba2d Config spacing fix 2017-09-27 00:48:47 -05:00
Scott Lahteine
f37ed314e0 Friendly layout for Arduino IDE 2017-09-21 16:27:13 -05:00
Scott Lahteine
f536c4dccb Move configs 2017-09-06 06:28:30 -05:00
Scott Lahteine
e4fcf460e7 Marlin bugfix-2.0.x Version/README 2017-08-31 17:56:08 -05:00
Michal Holes
54d48130f3 Slovak UTF-8 translation
Slovak UTF-8 translation
2017-08-23 19:14:35 -05:00
Vben
4817b39d98 Added new feature for AutoParking Extruder (APE) 2017-08-16 17:33:11 -05:00
Scott Lahteine
385f1bb9e5 Merge pull request #7504 from thinkyhead/bf1_servo_delays
Individual servo delays
2017-08-16 16:05:22 -05:00
Scott Lahteine
a1878cd1c0 Add "Level Corners" menu option 2017-08-16 02:54:33 -05:00
GMagician
e9c72978c7 Implement SERVO_DELAY as array
This modify give SERVO_DELAY x servo basis
2017-08-15 00:28:47 -05:00
Jozsef Kiraly
97c21e9007 Support for Geeetech GT2560 Rev.A/Rev.A+ 2017-08-06 00:42:54 -05:00
Scott Lahteine
804818b4d9 Bring configs up to date 2017-08-05 03:48:52 -05:00
teemuatlut
936d00dda8 Implement probing delay for piezo sensors 2017-07-29 21:46:40 -05:00
Scott Lahteine
51864fd365 Add bed size as a configuration option 2017-07-26 23:04:54 -05:00
C. Scott Ananian
890e7a16a9 Add support for Printrbot Neopixel RGBW strip.
Connected as described at http://printrbot.com/shop/led-strip/

Based on patch by Kelly Anderson <kelly@xilka.com> at
http://www.xilka.com/printrbot/marlin/1.1.4/20170707/
2017-07-22 16:07:55 -05:00
Scott Lahteine
fc9ce65095 Add BUSY_WHILE_HEATING for hosts that need it 2017-07-06 16:28:57 -05:00
Petr Zahradník
8c34233452 UTF-8 mapper for Czech 2017-07-04 15:51:23 -05:00
Scott Lahteine
69297b2d7b Make all EEPROM optimization options available 2017-07-02 20:47:03 -05:00
Scott Lahteine
232a10410d LCD_FOR_MELZI 2017-07-01 22:32:20 -05:00
Scott Lahteine
dcec7178d1 Expose DISABLE_M503 option as a test option 2017-07-01 21:31:28 -05:00
Scott Lahteine
5b03f23fa2 Bring configurations up to date, fix some comments 2017-06-28 16:41:49 -05:00
Scott Lahteine
5b11b33854 Add support for Průša MK2 Multiplexer 2017-06-27 04:55:30 -05:00
Scott Lahteine
afbc6e3e2f Update DELTA/SCARA config comments 2017-06-24 12:47:17 -05:00
Bob-the-Kuhn
325f09ea6c Add link to custom LiquidCrystal library by F. Malpartida 2017-06-22 13:07:08 -05:00
Scott Lahteine
907cafcbfd Support for two switching extruders 2017-06-19 17:20:59 -05:00
dot-bob
0bc66bf22c PCA9632 PWM color LED support
Add support for the PCA9632 PWM color LED driver used on the Ultimaker 2 and Wanhao Duplicator 6.
2017-06-12 01:09:24 -05:00
Bob-the-Kuhn
1c107b3949 delete problem line 2017-06-09 11:53:36 -05:00
Scott Lahteine
e556ab1dff Find three-point leveling points on Delta 2017-06-07 16:07:38 -05:00
Scott Lahteine
1919cb0d1e Config cleanups 2017-06-01 19:26:16 -05:00
Roxy-3D
364f8fb613 Update Configuration.h files to better names (#6814)
Changed UBL_G26_MESH_EDITING to UBL_G26_MESH_VALIDATION
Added UBL_MESH_EDIT_MOVES_Z to prepare for that change (coming next)
2017-05-21 11:10:22 -05:00
Scott Lahteine
99c4900a98 SPINDLE/LASER config changes 2017-05-17 04:23:06 -05:00
fixoid
c2321b1cdd Separate SWITCHING_NOZZLE and SWITCHING_EXTRUDER 2017-05-16 19:25:17 -05:00
Scott Lahteine
1c4ed8b106 Note 5 extruders in config comments 2017-05-07 21:28:54 -05:00
Brian
faa270071d Improve BLTOUCH_HEATERS_OFF functionality
- rename to PROBING_HEATERS_OFF
 - move heater pausing functionality into thermalManager
   - add variables, pause(), ispaused(), other functions
 - add fan pausing functionality -> PROBING_FANS_OFF
 - add probing_pause() wrapper
 - move pausing into do_homing_move() and do_probe_move() to minimize quiet time and so other probe types can benefit
 - example configs
2017-05-07 16:22:08 -04:00
Scott Lahteine
77769e284f Edit configuration comments 2017-05-05 13:32:31 -05:00
Scott Lahteine
da08e11acd Add EXTRAPOLATE_BEYOND_GRID option to bilinear leveling 2017-05-04 00:19:07 -05:00
Scott Lahteine
54751e8557 Put DISTINCT_E_FACTORS adjacent to the affected settings 2017-04-30 15:30:31 -05:00
Scott Lahteine
0dbe4b3e54 Edit configurations to reduce verbosity, arrange logically 2017-04-30 15:30:31 -05:00
Scott Lahteine
d7d4378481 Remove inaccurate version description 2017-04-30 14:57:19 -05:00
Scott Lahteine
7db805930a Cleanup configurations 2017-04-28 18:32:39 -05:00
Roxy-3D
4075b95519 Allow BL-Touch users to control heaters during probe event (#6485)
The Configuration.h file entries for BL-Touch have been updated to:
```cpp
//#define BLTOUCH
//#define BLTOUCH_DELAY 375      // (ms) Enable and increase if needed
//#define BLTOUCH_HEATERS_OFF // if defined the printer's heaters are
turned off during probe event
```
2017-04-28 09:19:55 -05:00
Scott Lahteine
959566cf0a Update note about M163 / M164 2017-04-22 16:23:15 -05:00
Scott Lahteine
0e97b3d6d0 Fix some configuration spacing 2017-04-14 22:36:10 -05:00
Scott Lahteine
1bd25fd2b3 Clean up config spacing, section headings, etc. 2017-04-14 19:06:31 -05:00
Scott Lahteine
fd2a0784ba Add support for SOLENOID_PROBE 2017-04-14 17:24:36 -05:00
Scott Lahteine
dac21ec680 Add support for an RGBW LED 2017-04-11 12:58:55 -05:00
Scott Lahteine
e7746ffee4 Extend RGB LED support, adding Printer Events 2017-04-11 12:15:41 -05:00
Scott Lahteine
9343f6a95f Put TOSHIBA with other stepper driver options 2017-04-09 20:52:49 -05:00
Scott Lahteine
1855534f20 Config files cleanup 2017-04-09 06:44:52 -05:00
Scott Lahteine
c26a315d0b Additional missed patches 2017-04-09 04:24:23 -05:00
Scott Lahteine
c54f6cf23d Updates to support 5 extruders 2017-04-09 03:49:16 -05:00
Scott Lahteine
824f3c1c0d Fix up configuration comments 2017-04-08 18:59:56 -05:00
Scott Lahteine
995ed90248 Clean up Filament Width Sensor comments 2017-04-08 18:59:56 -05:00
Scott Lahteine
2a84122edd Configuration changes to support 5 extruders 2017-04-07 10:46:35 -05:00
Bob-the-Kuhn
3b8926bd09 improved wording, consolidation of info, BLTouch warning
==============================================

clarified BLTouch calculation & changed comment delimitters/flags

I found it hard to pickout the various sections in this area so I
changed most comments from // style to /** ... */

Made the BLTouch calculation simpler and clarified the units of measure
for the result.

============================================

add changes to example configurations

============================================

add TinyBoy2 to this PR & add BLTouch Delay
2017-04-06 16:06:01 -05:00
Scott Lahteine
d13991ae18 Use same config name for all mesh dimensions 2017-04-06 16:05:59 -05:00
Scott Lahteine
c56eec29f0 Configurable delay for BLTouch servo emulation 2017-04-02 11:14:53 -05:00
Scott Lahteine
9e22184936 Add a "manual" option for ABL 2017-03-31 11:50:18 -05:00
Scott Lahteine
81136c1e82 Merge pull request #6177 from thinkyhead/rc_tinyboy
Support for TinyBoy 2 3D printer (and its OLED display)
2017-03-31 04:31:47 -05:00