MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
9,977 Commits 1 Branch 0 Tags 96 MiB
7632df6820
Commit Graph

1097 Commits

Author SHA1 Message Date
indazoo
f6bf247302 Add RepRapPro Huxley configuration (#10343) 2018-04-08 00:19:40 -05:00
Scott Lahteine
be0afd71df Add ADVANCED_PAUSE_FEATURE ACCEL options to example configs 2018-04-07 23:14:40 -05:00
Scott Lahteine
08b09f7a4c Add Chamber Temp options to example configs 2018-04-06 23:09:43 -05:00
Scott Lahteine
c46d47f45f Scale feedrate (mm/s to deg/s) for SCARA 2018-04-05 16:17:23 -05:00
Scott Lahteine
05fc3d7891 Add ADVANCED_PAUSE_CONTINUOUS_PURGE to example configs 2018-04-04 20:53:00 -05:00
Pavel Peganov
de5f69b285 Add Creality CR-8 configuration (#10285) 2018-04-02 19:58:02 -05:00
Scott Lahteine
be098cd42f Z Endstop Servo => Z Probe Servo 2018-04-01 23:54:47 -05:00
Thomas Karl Pietrowski
bfdd14be4f bq Hephestos2: Allow bed leveling (#10234) 
* Increases the offset, needed to allow the nozzle to touch the bed
* By default uses an offset of -4. This one is minimally far way from the buildplate and therefore only fine-tuning is needed to set the correct distance.
 2018-03-27 22:06:14 -04:00
Scott Lahteine
68b9503b96 MIN_PROBE_EDGE replaces DELTA_PROBEABLE_RADIUS 2018-03-19 02:17:45 -05:00
Scott Lahteine
cf4e2e507f Consolidate 3-point leveling point options 2018-03-19 01:55:51 -05:00
Scott Lahteine
f7de05e50c General spacing cleanup 2018-03-17 16:51:34 -05:00
shaktee
c2ba9a03ee BIBO2 default update and Cyclops config (#10107) 2018-03-15 00:17:04 -05:00
Scott Lahteine
5c81ce2bb8
When STATUS_EXPIRE_SECONDS is 0, hide the position. (#10100) 
Some users may prefer to hide the position updates on the `LIGHTWEIGHT_UI` altogether. This leads to an even less cluttered display (it also saves on SPI traffic and one byte of RAM).
 2018-03-14 02:44:41 -05:00
Scott Lahteine
738a8495ad Improve TMC config organization, naming 2018-03-13 21:43:43 -05:00
Scott Lahteine
e63cb5fe8f
[1.1.x] Make MIN_PROBE_EDGE a general option (for electronic probes) (#10068) 
Some probes don't work near the edges of the bed. This change promotes MIN_PROBE_EDGE to a general setting that applies to all probing functions.
 2018-03-13 01:15:29 -05:00
Scott Lahteine
33b18dc801 Add Z_AFTER_PROBING to example configs 2018-03-11 09:48:03 -05:00
Scott Lahteine
cce80fd41c Add UNKNOWN_Z_NO_RAISE to example configs 2018-03-09 23:11:35 -06:00
Scott Lahteine
a9392c6b27 Set a safe default MINIMUM_STEPPER_PULSE of 2 2018-03-09 03:59:18 -06:00
Scott Lahteine
2d0d5eccd8 Move AUTO_REPORT_SD_STATUS to SDSUPPORT block 2018-03-07 01:58:31 -06:00
Scott Lahteine
dc733192be Add AUTO_REPORT_SD_STATUS to example configs 2018-03-07 00:06:17 -06:00
Scott Lahteine
081ab35e82 Remove some trailing whitespace 2018-03-04 21:13:36 -06:00
Scott Lahteine
3cdd2591ed Update custom boot screen description 2018-03-03 20:10:35 -06:00
Scott Lahteine
a6326d25fb Drop SCARA_FEEDRATE_SCALING 
The updated planner takes the length of the move, so this pre-calculation is no longer needed.
 2018-03-01 04:28:42 -06:00
Scott Lahteine
114e9b0f56 Fix CR-10 status screen missing commas 
Fix #9660
 2018-02-26 15:50:04 -06:00
Scott Lahteine
c1a1f80fff Standardize encoder buzz defaults 2018-02-24 22:55:46 -06:00
Scott Lahteine
8488d64062 Standardize encoder defaults 2018-02-24 22:37:55 -06:00
Scott Lahteine
7dab8ca5dc Add Creality Ender-4 configurations 2018-02-24 22:01:16 -06:00
Scott Lahteine
d0c8aabd28 Move Creality Ender-2 configurations 2018-02-24 22:01:11 -06:00
Scott Lahteine
8c22f9fd4f Bring some example configs up to speed 2018-02-24 22:00:15 -06:00
Roxy-3D
9e3025e07b
Change Folger Tech i3-2020 defaults... 2018-02-24 10:28:08 -06:00
Scott Lahteine
5299b577d1
Spanish (UTF8) Language (#9785) 
From #7314 by @MrAmericanMike
 2018-02-23 20:23:35 -06:00
Scott Lahteine
6845f17fb2 Prettify LCD_PROGRESS_BAR options 2018-02-23 19:13:03 -06:00
Scott Lahteine
03da273ea6 Fix LCD_PROGRESS bar 
Fix #9208
 2018-02-23 13:59:55 -06:00
Scott Lahteine
235d024505 Add RESTORE_LEVELING_AFTER_G28 to example configs 2018-02-23 12:42:21 -06:00
Sebastianv650
9c65890644 [1.1.x] LIN_ADVANCE v1.5 (#9700) 2018-02-23 00:53:41 -06:00
Scott Lahteine
d55aaf95e8
Merge pull request #9761 from thinkyhead/bf1_lightweight_glcd 
[1.1.x] Lightweight status screen for ST7920
 2018-02-22 23:55:24 -06:00
Masterkookus
5f6a8588c5 [1.1.x] Hatchbox Alpha Config with E3Dv6 (#9721) 2018-02-22 02:57:38 -06:00
Scott Lahteine
967076b080 Add LIGHTWEIGHT_UI to example configs 2018-02-22 00:25:53 -06:00
Scott Lahteine
855b188102
Hephestos2 heated bed kit for all (#9756) 2018-02-21 22:26:56 -06:00
Scott Lahteine
6759be43ea Add CR-10S _Bootscreen.h 2018-02-21 20:19:12 -06:00
Scott Lahteine
6e0001b4f8 Add CR-10mini configuration 2018-02-21 20:19:12 -06:00
Scott Lahteine
84f0ce4751 Some encoder steps handled in Conditionals_LCD.h 2018-02-21 20:19:11 -06:00
Scott Lahteine
d9e2acd1b2 Configs parity with 2.0.x 2018-02-21 20:19:11 -06:00
Scott Lahteine
126a80ea83
Reduce Creality3D bootscreens flash usage (#9745) 2018-02-21 16:08:27 -06:00
Scott Lahteine
18881e6725 Add 20x4 option for Sainsmart LCD 2018-02-20 20:09:49 -06:00
Scott Lahteine
6e932f979d CR-10 Bootscreen 
From @plainpylut in #9660
 2018-02-19 08:05:32 -06:00
Scott Lahteine
cc8711419e Add NUM_RUNOUT_SENSORS to example configs 2018-02-19 06:25:36 -06:00
Scott Lahteine
4813938a87 Update configs for 2.0.x parity 2018-02-18 19:42:20 -06:00
Scott Lahteine
b45a277c52
ENDER can use BOARD_MELZI_CREALITY (#9694) 2018-02-18 02:24:23 -06:00
Scott Lahteine
28e7562e7a Add CODEPENDENT_XY_HOMING to example configs 2018-02-18 01:09:51 -06:00
Scott Lahteine
8761cb0464
Merge pull request #9682 from thinkyhead/bf1_m73_without_sd 
[1.1.x] Allow M73 without SDSUPPORT
 2018-02-17 15:50:19 -06:00
Scott Lahteine
aceadabe89
Merge pull request #9674 from bytespider/bugfix-1.1.x 
Add TronXY XY100 config
 2018-02-17 15:49:29 -06:00
Scott Lahteine
3a1fedaee6 Update LCD_SET_PROGRESS_MANUALLY in configs 2018-02-17 15:41:20 -06:00
Scott Lahteine
ada40af5d6 Move <avr/pgmspace.h> include to MarlinConfig.h 
For parity with 2.0.x, which includes pgmspace.h in the HAL.
 2018-02-16 18:40:39 -06:00
Rob Griffiths
529e6ed1ea added TronXY XY100 config 2018-02-16 13:57:01 +00:00
Bob-the-Kuhn
1647db8fad Set CONTROLLER_FAN_PIN example to -1 2018-02-15 21:29:09 -06:00
Roxy-3D
c8d3069580
UBL - Allow user to control Z-Height correction for off mesh movements (#9663) 
* UBL - Allow user to control Z-Height correction for off mesh movements

* Enable UBL_Z_RAISE_WHEN_OFF_MESH on test machine for time being
 2018-02-15 19:23:01 -06:00
Roxy-3D
66370006bb
Fix G26 Circles... (#9638) 
Will get this duplicated in bugfix_2.0.0 tomorrow...
 2018-02-14 17:31:25 -06:00
Scott Lahteine
d89a61bd51 Update DIGIPOT_I2C_MOTOR_CURRENTS comments 2018-02-13 22:56:03 -06:00
Scott Lahteine
0acaaf536d Update gMax1.5+ for 2.0.x parity 2018-02-11 05:20:57 -06:00
Scott Lahteine
2e7a754ac1 Megatronics baud rate 115200 
Fix #9092
 2018-02-11 03:42:27 -06:00
Scott Lahteine
bb155ed38e Correct MOTHERBOARD for Geeetech i3 Pro X 
Fix #8856
 2018-02-10 20:27:11 -06:00
Douglas Hammond
1e00ba5433 Add Tronxy X5S 2018-02-10 15:03:20 -06:00
Scott Lahteine
3e838bf6b6 Cyclops has SINGLENOZZLE and higher temp 2018-02-08 19:07:43 -06:00
Scott Lahteine
b81980a439 TouchX base config differences 2018-02-08 19:07:43 -06:00
Rajesh Vaidheeswarran
98e7b821b4 Add Cyclops configuration for BIBO 2018-02-08 18:24:40 -06:00
Scott Lahteine
4f04f4e6b8 Followup to #9532 2018-02-08 03:39:20 -06:00
jaysonkelly
f8a8711075 I2C position encoders update 
Updating I2C position encoders to enable babystepping and Babystep XY when using the ecm microstep correction method. Also changed default method to ECM microstep.
 2018-02-08 02:46:12 -06:00
Scott Lahteine
8438a57910 Followup to #9532 2018-02-08 02:05:18 -06:00
Thomas Moore
a471cd26e1 [1.1.x] Enable Z axis and delta sensorless homing (#9532) 2018-02-08 02:02:48 -06:00
Scott Lahteine
3137df9ad4 Special override of LCD_WIDTH 2018-02-07 22:16:07 -06:00
Scott Lahteine
3621f21fb2 Clean trailing space 2018-02-07 02:40:41 -06:00
Scott Lahteine
80946a17ee Add AUTO_POWER_CONTROL to example configs 2018-02-06 00:20:26 -06:00
1138-4EB
b86dfd35ae Configs for Prusa i3 Pro B GT2560 Rev.A Plus 
One without probe and one with BLTOUCH.
 2018-02-05 23:54:19 -06:00
Scott Lahteine
527d260581 Add ULTI_CONTROLLER to example configs 2018-02-05 22:24:08 -06:00
Scott Lahteine
ca58084020 Add MALYAN_LCD to configurations 2018-02-04 21:18:42 -06:00
shaktee
6e86c9d22b Add BIBO configs to Marlin bugfix-1.1.x (#9467) 
[1.1.x] BIBO TouchX configuration
 2018-02-03 23:20:35 -06:00
Manuel Valentino
652162777b [1.1.x] Fixed wrong information about TMC2208 wiring (#9334) 2018-02-02 04:14:43 -06:00
teemuatlut
923f17328f Add TMC software SPI (#9362) 2018-02-02 03:56:08 -06:00
Scott Lahteine
8bccd0ef5b Fix up _Bootscreen.h and _Statusscreen.h 
- Support for 3 and 4-frame fan animation
- Binary bitmap data for easier visualization
- Cleanup mystery numbers, etc.
 2018-02-02 00:55:02 -06:00
Scott Lahteine
2177c246d5 Patch BQ Hephestos 2 filament diameter 
From #9314
 2018-01-23 20:38:43 -06:00
Scott Lahteine
3d9f360b5a Better probe boundaries for linear/grid 2018-01-22 01:10:34 -06:00
Scott Lahteine
c8ac3a2a72 Add example configs for JGAurora A5 2018-01-21 22:23:31 -06:00
Scott Lahteine
957bb3124a Add thermistor 15 tuned for JGAurora A5 2018-01-21 16:57:47 -06:00
Scott Lahteine
94a9cd6477 CR-10S filament change length, enhanced status bitmap 2018-01-21 01:58:55 -06:00
Scott Lahteine
0cfcc7cbf5 Make "Ender" status screen dual-nozzle ready 2018-01-21 01:58:55 -06:00
Scott Lahteine
428fbe8228 Apply CASE_LIGHT_USE_NEOPIXEL to example configs 2018-01-20 16:27:30 -06:00
Scott Lahteine
d29a0d64d5
Set FIL_RUNOUT_PIN for Creality CR10-S 
Tested with M43 and found to be connected to DIO 2
 2018-01-20 11:58:37 -06:00
Scott Lahteine
09ad00b2d1
Use standard encoder pulses/steps for CR-10S 2018-01-20 11:34:53 -06:00
Roxy-3D
cbdbeb3e69
PronterFace M105 work around (#9227) 
PronterFace keeps sending M105 requests during long operations like G29 P1, G29 P2, G29 P4 and G26. The serial buffer fills up before the operation is complete. The problem is, a corrupted command gets executed. It is very typical for the M105 to turn into a M1 (actually... M1M105 is typical).

This causes the printer to say "Click to resume..."

This is a temporary fix until we figure out the correct way to resolve the issue.

More work needed for G26.
 2018-01-17 22:51:19 -06:00
Roxy-3D
c11665e92f
Regression fixes for UBL's G29 P1, G29 P2, G29 P4 and G26 (#9213) 
The changes to ultralcd.cpp for is_lcd_clicked() did not encompass the
full functionality of UBL's G29 P1, P2 and P4.   It also broke G26's
ability to abort in several of its phases.

This is the first pass at fixing the problem.   It has been tested for
correctness for several hours but more testing  needs to be done.
There may be a few follow up patches to finish covering all the corner
cases, but right now I need to merge this before any conflicts show up.

Some of these changes will need to be moved over to the bugfix-v2.0.0
branch.   That will happen a few days from now.
 2018-01-17 00:27:50 -06:00
Roxy-3D
06adef7343
Get FT-i3-2020 example files in compliance with ?_BED_SIZE 2018-01-15 15:32:19 -06:00
Scott Lahteine
69c993092b Followup to Ender config 2018-01-15 05:48:50 -06:00
Tommie Gannert
f3f26f7cb3 Creality Ender support. 
Reverse engineered from the unpublished firmware from Creality,
inferring the base version and configuration they used. The basis is
the firmware version from "Jul 31 2017 10:16:30". Configurations were
found by seeing what code was compiled into the firmware, and
constants used there.

They used Marlin 1.0.1, because

* 1.0.0 had very different serial output in `setup()` and overall
  code structure.
* 1.0.2 changed the `VERSION_STRING` to include a leading space,
  and `lcd_init` uses `SET_INPUT` instead of `pinMode`.

For U8Glib, a version between 1.14 and 1.17 was used, because

* 1.12 didn't have the extra speed argument to u8g_InitCom.
* 1.13 didn't have the soft reset instruction for UC1701 initialization.
* 1.18 has a new directory structure.

Quirks

* The value of PID_dT hints that F_CPU is 20M, but MarlinSerial.begin
  suggests it's indeed 16M (and the board uses 16M). Left at 16M for now.

* The LED and DOGLCD_CS are on the same pin.
 2018-01-15 03:39:43 -06:00
Scott Lahteine
a16ae30a61 More featureful CR-10S configuration 2018-01-15 01:02:23 -06:00
Scott Lahteine
8f08e029d8 More up-front option to show SD percentage 2018-01-14 23:30:59 -06:00
Scott Lahteine
734fa91e63 Misc config updates 2018-01-14 23:18:45 -06:00
Scott Lahteine
1d5eba4470 Add FLSUN Kossel configuration 2018-01-14 23:18:45 -06:00
Scott Lahteine
758d9db964 Link to marlinfw.org bitmap tool 2018-01-14 22:39:57 -06:00
GrantM11235
a0bd811093 [1.1.x] Fix support for Malyan M150 (#9146) 
Implements changes to LCD and encoder pins from
forums.reprap.org/read.php?110,716538,728278 and also sets
ST7920_DELAY_[1-3] to DELAY_2_NOP to be compatible with the slower LCD
 2018-01-12 01:14:07 -06:00