MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
9,759 Commits 1 Branch 0 Tags 96 MiB
80c51ea572
Commit Graph

8097 Commits

Author SHA1 Message Date
Sebastien Andrivet
4cc2bc1343 [1.1.x] Add new capability to report if Thermal Protection is enabled (#10465) 2018-04-20 16:42:56 -05:00
Scott Lahteine
dcb8af0518 Match Makefile order to boards.h 2018-04-20 16:19:31 -05:00
Scott Lahteine
4108382c2c Complete CREALITY_ENDER revert 
Followup to #9694
 2018-04-20 16:19:31 -05:00
Scott Lahteine
0c1be965b6 Don't report point 0 in MBL G29 2018-04-20 13:18:42 -05:00
Scott Lahteine
6f87e4b4dc Fix up enqueue now functions 
…and apply to MALYAN_LCD.
 2018-04-19 19:33:16 -05:00
Roxy-3D
c91b3142aa
Update ubl_motion.cpp 
Restore necessary and needed loop termination logic.
 2018-04-19 12:03:18 -05:00
Scott Lahteine
51aa9743a6 Rename MKS_13 to MKS_GEN_13 2018-04-18 22:16:16 -05:00
Scott Lahteine
e561ecb5a7 Add BOARD_MKS_BASE_15 with digital micro-stepping 2018-04-18 22:06:25 -05:00
Scott Lahteine
38ed5f5ee9 Fix calls to ubl.get_z_correction 2018-04-18 21:43:44 -05:00
Scott Lahteine
23618d9cd0 Use 0 as the bed position (not Z_MIN_POS) 2018-04-17 20:30:17 -05:00
Scott Lahteine
8cf6ef8411
Merge pull request #10431 from thinkyhead/bf1_fix_and_improve 
[1.1.x] Improve UBL mesh report, M420 V T, M421 N, and…
 2018-04-17 16:59:14 -05:00
Scott Lahteine
fa3c14fccf Fix compile warnings in fastio.h 
Based on #10440 by @GMagician
 2018-04-17 16:36:19 -05:00
Scott Lahteine
773d773baa Fix compile error in tmc_status 2018-04-17 16:15:53 -05:00
Scott Lahteine
5c186f7dd3 Try FIXFLOAT rounding based on sign 2018-04-17 15:59:49 -05:00
Scott Lahteine
77b75ce86c One fewer compare in _lcd_move_xyz 2018-04-17 15:55:43 -05:00
Scott Lahteine
6f156d01d9 Update position for UBL non-segmented activate/deactivate 2018-04-17 15:55:43 -05:00
Scott Lahteine
c0f6eebded Improve UBL mesh report. Add M420 T, M421 N 2018-04-17 15:55:38 -05:00
Scott Lahteine
6786101c64 Ignore LCD_BED_LEVELING with UBL 2018-04-17 15:54:25 -05:00
Scott Lahteine
ee21f44969 Tweak fwretract.retract debug, comments 2018-04-17 15:54:25 -05:00
Scott Lahteine
090e08ef3d M221 with no parameters report flow 2018-04-17 15:54:25 -05:00
Scott Lahteine
444b6d6d83 Prevent delay when power is already on 
Fix #10410
 2018-04-17 04:36:14 -05:00
Scott Lahteine
f1dfc80332 Improved SENSORLESS_HOMING sanity check 2018-04-17 04:10:57 -05:00
Scott Lahteine
31261d0c17 Fix bug in Planner::set_position_mm 2018-04-16 02:05:48 -05:00
Thomas Moore
85d57f7a9e [1.1.x] Change UBL default G29 P4 height to 0 (#9510) 2018-04-15 20:49:03 -05:00
Scott Lahteine
8a159dfec2 Remove Brazilian Portuguese duplicates 
Followup to #10368
 2018-04-15 19:16:01 -05:00
Scott Lahteine
d59ed4dce0
Abort SD printing more safely (#10405) 
Allow the current command to complete when aborting an SD print, otherwise some commands (G28, G29, etc.) will cause trouble.
 2018-04-15 18:26:25 -05:00
Vitorio Miguel Prieto Cilia
110e631656 Update pt-br translation (#10368) 2018-04-15 00:07:13 -05:00
Scott Lahteine
9769d799df clear_block_buffer, kill_current_block in quick_stop 2018-04-13 22:05:58 -05:00
Scott Lahteine
a783caabac Make sure ABL (manual) starts close to the bed 2018-04-13 20:19:49 -05:00
Roxy-3D
b978153ca4
Stow Probe at end of G29 J3 2018-04-13 14:46:40 -05:00
Scott Lahteine
090d72f591
[1.1.x] Add optional menu item to toggle software endstops (#10392) 2018-04-13 00:24:20 -05:00
Scott Lahteine
e3c2d43b2b Tweak MBL move close to bed 2018-04-12 22:41:26 -05:00
Scott Lahteine
5274ab0ad5 MESH_BED_LEVELING before PROBE_MANUALLY 2018-04-12 22:26:56 -05:00
Scott Lahteine
59d9886473 Tweak MIN_STEPS_PER_SEGMENT sanity-check 2018-04-12 20:23:43 -05:00
Luc Van Daele
6e30d1bef1 [1.1.x] G33 MIN_STEPS_PER_SEGMENT (#10385) 2018-04-12 20:19:42 -05:00
Scott Lahteine
db81a1d4a2 Make sure MBL starts close to the bed 
Fix #10390
 2018-04-12 19:37:50 -05:00
Scott Lahteine
2edc13a0e2 Fix M118 parameter handling 
Fix #10388
 2018-04-12 19:06:41 -05:00
Scott Lahteine
8db9b800e7 Compress/update comments ubl_motion 
…to fit more code on the screen and correct outdated commentary contrasting ABL.
 2018-04-12 18:08:33 -05:00
Luc Van Daele
21971f2f7a Overhaul of G33 Delta Calibration (#8821) 2018-04-11 19:12:56 -05:00
Luc Van Daele
b2265869b2 Low Point for delta calibration (#10362) 2018-04-11 18:03:34 -05:00
Scott Lahteine
f408863043 Fix Spanish MSG_[ABC] items 2018-04-11 15:21:08 -05:00
Scott Lahteine
336131fb37 Trailing whitespace 2018-04-11 00:27:43 -05:00
Scott Lahteine
808d6f367b Tweak RAMPS SDSS pins 2018-04-10 16:46:17 -05:00
Scott Lahteine
4f660a18bc Add Z_PROBE_LOW_POINT to prevent damage 2018-04-09 17:22:28 -05:00
Scott Lahteine
e87ae5b643 Add Z_PROBE_LOW_POINT to example configs 2018-04-09 01:56:57 -05:00
Scott Lahteine
73fe8ef4df Followup to #10177 2018-04-09 01:16:51 -05:00
Scott Lahteine
157d28c418 Rename, arrange advanced pause purge options 2018-04-09 01:14:07 -05:00
Scott Lahteine
e143b1252f Appy const to manage_inactivity 2018-04-08 23:53:55 -05:00
Roxy-3D
816fa9e2b4 More accurate number for Z_PROBE_OFFSET_FROM_EXTRUDER 2018-04-08 22:25:11 -05:00
Roxy-3D
661a38586b Resolve corruption of Max7219 Debug LED Matrix 2018-04-08 22:25:11 -05:00
Scott Lahteine
56b5fb5e15 Update Bed PID config comments 2018-04-08 06:46:05 -05:00
Scott Lahteine
2205c7775b FILAMENT_CHANGE_LOAD_LENGTH sanity-check 
Followup to #10177
 2018-04-08 03:31:15 -05:00
Scott Lahteine
b637b80a9a
Merge pull request #10177 from thinkyhead/bf1_filament_load_accel 
[1.1.x] Filament load/unload add acceleration for Bowden
 2018-04-08 03:28:45 -05:00
Scott Lahteine
19440df4d0 Better RESTORE_LEVELING_AFTER_G28 sanity-check 
As suggested by @GMagician
 2018-04-08 03:13:35 -05:00
Scott Lahteine
6f8717ce12 Fix LIGHTWEIGHT_UI with UBL 
As mentioned in https://github.com/MarlinFirmware/Marlin/issues/10317#issuecomment-379100702
 2018-04-08 03:11:53 -05:00
Scott Lahteine
6ec2cbce18 Bring RepRapPro Huxley config up to date 
Followup to #10343
 2018-04-08 00:31:18 -05:00
indazoo
f6bf247302 Add RepRapPro Huxley configuration (#10343) 2018-04-08 00:19:40 -05:00
Sean
4b36a0a3dc Add acceleration for filament change, load, unload. 
This is useful to achieve a higher movement speed on Bowden extruders.
Also add a slow mode before ramping up to the high speed to make loading easier.
 2018-04-07 23:14:40 -05:00
Scott Lahteine
be0afd71df Add ADVANCED_PAUSE_FEATURE ACCEL options to example configs 2018-04-07 23:14:40 -05:00
Lenbok
0aa833fe6c Chamber temperature monitoring and auto fan control. 
This is an initial cut for feedback.

Chamber temperature is currently reported along with hot end and bed
temperatures to serial. The format is just like that used for hot end
and bed temperatures, but using 'C' prefix. As there is no heater,
target is always 0. Is this appropriate, is there a better way to report
chamber temperatures?

Chamber temperatures are not reported on the LCD in any way.

When auto chamber fan is enabled, it currently just uses the same
temperature threshold as the other auto controlled fans.

As the chamber temperature is not connected to any heater, it doesn't
undergo mintemp/maxtemp monitoring. This would need to change in the
future if chamber heating became a feature.
 2018-04-06 23:09:44 -05:00
Scott Lahteine
08b09f7a4c Add Chamber Temp options to example configs 2018-04-06 23:09:43 -05:00
Roman Moravčík
151962baf2 Update Slovak language (#10313) 2018-04-06 20:20:40 -05:00
Bob-the-Kuhn
aca2bbbc50 Add TMC software SPI pins to pinsDebug_list.h (#10325) 2018-04-06 20:16:05 -05:00
Scott Lahteine
211544b543 Reset progress bar when print ends 
Fix #10330
Based on #10333 by @marcio-ao
 2018-04-06 20:12:40 -05:00
GMagician
8e36d00ad0 [1.1.x] Update language_it.h (#10323) 
Updated to #10296
 2018-04-06 20:07:08 -05:00
Scott Lahteine
ed949cc5c1 Added support for Einsy Retro 
http://reprap.org/wiki/EinsyRetro
 2018-04-05 18:15:58 -05:00
Scott Lahteine
53757444c5 Default active low for TMC2130 DIAG1 (#10294) 
- Added sanity check to require endstop inverting with SENSORLESS_HOMING
 2018-04-05 18:15:58 -05:00
Scott Lahteine
c46d47f45f Scale feedrate (mm/s to deg/s) for SCARA 2018-04-05 16:17:23 -05:00
Anton Piliugin
bc2fc86993 Update language_ru.h (#10311) 2018-04-05 00:47:02 -05:00
Scott Lahteine
dba26a6d1f Add Continuous Purge feature to Advanced Pause 2018-04-04 20:59:50 -05:00
Scott Lahteine
05fc3d7891 Add ADVANCED_PAUSE_CONTINUOUS_PURGE to example configs 2018-04-04 20:53:00 -05:00
Scott Lahteine
7ff70d7adb
Improve heating/cooling LCD messages (#10296) 2018-04-04 19:13:48 -05:00
Scott Lahteine
a7e142460c
MBL should add z_offset regardless of fade (#10307) 2018-04-04 18:27:09 -05:00
GMagician
9d2ef95f1d Additional tool-change fix (#10305) 
Followup to #10243
 2018-04-04 17:06:25 -05:00
Pavel Peganov
de5f69b285 Add Creality CR-8 configuration (#10285) 2018-04-02 19:58:02 -05:00
Scott Lahteine
829281d016
Merge pull request #10243 from thinkyhead/bf1_tool_change_debug 2018-04-02 19:33:27 -05:00
Scott Lahteine
be098cd42f Z Endstop Servo => Z Probe Servo 2018-04-01 23:54:47 -05:00
Scott Lahteine
6444ef02e4 Add remaining boards to Makefile 2018-04-01 18:15:52 -05:00
D-side
ab5232c37b Fix Ender 4 / CR-8 compilation 
- Assign 243 (like EFB) as Ender-4/CR-8 board ID
- Add to `Makefile`
- Add to `pins.h`
 2018-04-01 18:15:52 -05:00
MoellerDi
6b150bfc40 Handle disabled HYBRID_THRESHOLD in EEPROM (#10274) 2018-04-01 16:58:30 -05:00
Scott Lahteine
885ad70c8b Fix likely issue with retract/recover 
Addressing #10200
 2018-03-31 22:59:48 -05:00
Scott Lahteine
d37cfa327e Note about MKS_MINI_12864 in sanitycheck 2018-03-31 22:51:43 -05:00
Scott Lahteine
040ebd1675 Use lcd_printPGM_utf in more places 
Fix #10256
 2018-03-31 20:47:20 -05:00
Scott Lahteine
48fa0e6de0 Output ABC for delta stepper counts 2018-03-31 20:12:53 -05:00
Scott Lahteine
c9aa7486ce Use float62 for LCD edit of Z Fade 2018-03-31 20:02:28 -05:00
Scott Lahteine
80b3f8c395 Allow Z_SAFE_HOMING sanity checks to handle floats 2018-03-31 19:00:14 -05:00
Scott Lahteine
712b213b40 Split up tool_change, raise for non-delta too 2018-03-30 16:06:52 -05:00
Scott Lahteine
52750bf362 Simplified leveling-based tool change 2018-03-30 16:06:47 -05:00
Scott Lahteine
0afdec882c For set_z_fade_height use set_bed_leveling_enabled 2018-03-30 16:06:42 -05:00
Scott Lahteine
29b048810c Symmetrical FWRETRACT Z Hop 
Do the Z lift normally before setting Z back to its prior value. But do the Z lower using spoofing. This should produce proper symmetrical movement.
 2018-03-30 15:47:06 -05:00
Scott Lahteine
0eb1830d85 Change order of inactive stepper disable/enable 
This ensures that steppers that share an enable pin will only be disabled for a miniscule time.
 2018-03-30 15:10:03 -05:00
Scott Lahteine
f5c980f9cf Clear the "Wait for user" message set by M0/M1 
See https://github.com/MarlinFirmware/Marlin/issues/10246#issuecomment-377146936
 2018-03-29 17:57:50 -05:00
Scott Lahteine
d36e950547 Temporary workaround for tool-change compile error 
Pending a more complete solution to tool-change Z deviation.
 2018-03-29 17:57:50 -05:00
Scott Lahteine
df75e9d692 Fix BLTOUCH compile error 
Followup to #10249
 2018-03-29 17:57:49 -05:00
AnHardt
86c3be7089 No delay in sensorless quick homing (#10253) 2018-03-29 16:09:19 -05:00
Scott Lahteine
575b099e40 Alert users about low Z jerk values 2018-03-28 22:58:41 -05:00
Scott Lahteine
360166f626
Merge pull request #10249 from thinkyhead/bf1_homing_move_adjustments 
[1.1.x] Improvements to general and delta homing
 2018-03-28 22:05:40 -05:00
Scott Lahteine
b5f1a4141c "G28 Z forbidden" => "Home XY first" 2018-03-28 21:54:20 -05:00
Scott Lahteine
0401f4ce14 Clear sensorless homing in home_delta after first move-to-top 2018-03-28 21:19:14 -05:00
Scott Lahteine
9f3b4d537d Do moves towards endstops differently in do_homing_move 2018-03-28 21:19:14 -05:00