Scott Lahteine
8bb1e91afd
More specific M100 description
2017-10-25 16:11:09 -05:00
Scott Lahteine
a12d1b21b5
Merge pull request #8048 from madmo/mks-mini-gt2560
...
[1.1.x] Add MKS MINI 12864 support to GT2560
2017-10-25 01:13:07 -05:00
Scott Lahteine
5bed2f351a
Fix spacing, use single instances of similar pins
2017-10-24 19:12:40 -05:00
Scott Lahteine
ec9d7b639d
Encourage users to re-examine their configs
2017-10-24 18:33:31 -05:00
Scott Lahteine
1c97c1582c
Move UBL_SAVE_ACTIVE_ON_M500 to Configuration.h
2017-10-24 18:25:50 -05:00
Scott Lahteine
f06f4b40b8
Apply physical limits to mesh bounds
2017-10-24 16:49:00 -05:00
Scott Lahteine
3235beef6d
Merge pull request #8073 from thinkyhead/bf1_fix_M600
...
[1.1.x] Fix position sync in M600 pause/resume
2017-10-24 14:56:01 -05:00
Scott Lahteine
e5ab783b08
Merge pull request #8061 from thinkyhead/bf1_general_cleanup
...
[1.1.x] Patch up some verbiage in configs
2017-10-24 14:44:31 -05:00
Scott Lahteine
355ebec92d
Fix position sync in M600 pause/resume
2017-10-24 14:41:54 -05:00
montri2025
fa157f08ff
lcd <20 disply Bed Temperature cast ty ( #8068 )
2017-10-23 23:46:26 -05:00
Scott Lahteine
39a545b3f8
Patch up some verbiage in configs
2017-10-22 17:14:50 -05:00
Roxy-3D
e9bc9a2ab4
change to better (more clear) names ( #8049 )
...
set_destination_to_current() changed to set_destination_from_current()
set_current_to_destination() changed to set_current_from_destination()
2017-10-21 10:58:17 -05:00
Moritz Bitsch
b22c87183f
Add MKS MINI 12864 support for GT2560
2017-10-21 13:05:21 +02:00
tweichselbaumer
fa44130734
Add M290 babystepping ( #8014 )
...
* Add M290 babystepping
* Allow `Z` for `M290`
* fix spacing
* Support BABYSTEP_XY in M290
* Not just Z
* Extend M290 for BABYSTEP_ZPROBE_OFFSET
* tweak
2017-10-21 03:58:53 -05:00
MetalSearch
9b3f27f02a
Fix:EndStops doesn't working with BOARD_RAMPS_14_EFB on Micromake C1 ( #8041 )
...
[1.1.x] Fix EndStops don't work with BOARD_RAMPS_14_EFB on Micromake C1
2017-10-21 00:24:22 -05:00
Scott Lahteine
a7398a0459
Prevent SDCARD_SORT_ALPHA from exploding
2017-10-20 19:14:11 -05:00
Scott Lahteine
91c5c2538a
Add SCROLL_LONG_FILENAMES advanced option
...
Based on #7637 by @marcio-ao
2017-10-20 19:14:10 -05:00
Scott Lahteine
259cf1b0b2
BQ enables this in the config. Remove here
2017-10-18 23:23:56 -05:00
Scott Lahteine
2338632270
Simplify Cartesian probing bounds
...
Followup to #8011
2017-10-18 17:16:14 -05:00
Luc Van Daele
2a88a3fd33
boolval revised ( #8017 )
2017-10-18 14:19:01 -05:00
Thomas Moore
84470f6b2a
Update UBL mesh boundaries to accomidate beds centered at 0, 0 ( #8011 )
2017-10-18 10:03:00 -05:00
studiodyne
e04902f589
Add EXTRA_FAN_SPEED feature
2017-10-16 02:32:30 -05:00
Scott Lahteine
d63d08ef8b
Merge pull request #7948 from gallynero/patch-1
...
Enable change feedrate in delta
2017-10-15 16:28:45 -05:00
Scott Lahteine
5c2ff6ed19
Add Capability BUILD_PERCENT
2017-10-15 03:01:36 -05:00
Scott Lahteine
5f708d47ce
Add LCD_SET_PROGRESS_MANUALLY
2017-10-15 02:21:09 -05:00
Scott Lahteine
3b4b9c6d68
Unaccented French for Character Display
2017-10-14 20:17:29 -05:00
MetalSearch
8df47d76c7
Add control board MAKEBOARD Mini
...
+Add French language without accent for japanese LCD
2017-10-14 20:10:03 -05:00
Scott Lahteine
be55a49946
Merge pull request #7980 from thinkyhead/bf1_granular_sw_endstops
...
[1.1.x] Software endstop options by axis
2017-10-14 17:37:35 -05:00
Scott Lahteine
e05af35678
Add MIN_SOFTWARE_ENDSTOP_[XYZ] to example configs
2017-10-14 17:14:19 -05:00
Scott Lahteine
060d16d26b
Split the software endstop capability by axis.
...
Based on #7975 and #7979
2017-10-14 17:14:08 -05:00
Scott Lahteine
e17869ca20
Fix Emergency Parser
...
Followup to #7459
2017-10-14 15:58:07 -05:00
Scott Lahteine
662105c1b6
ADC sensor fix inspired by 'Evgen2' on Twitter
2017-10-14 02:39:13 -05:00
Scott Lahteine
b8ddae61e2
ubl_state no longer needed
2017-10-14 02:39:13 -05:00
Scott Lahteine
ece14af556
Improve LCD leveling value edits
2017-10-14 02:39:13 -05:00
Scott Lahteine
b07a2aa23c
Add HAS_MESH conditional
2017-10-14 02:39:12 -05:00
Scott Lahteine
88857e8028
Move fade_scaling_factor_for_z to Planner
2017-10-14 02:10:46 -05:00
Scott Lahteine
8e808fcadc
General cleanup, apply const
2017-10-13 16:13:36 -05:00
Scott Lahteine
da93a272a0
Move leveling_is_active to a macro
2017-10-13 16:11:27 -05:00
Scott Lahteine
3d5b10735f
Remove obsolete UBL z_offset
2017-10-13 08:23:01 -05:00
gallynero
94228d4522
Enable change feedrate in delta
...
Enable change the relative feedrate on a printing job in delta machines with UBL
2017-10-12 01:55:51 +02:00
Slawomir Ciunczyk
167058b61f
Different NEOPIXEL types
...
Changes to support NEOPIXEL LED strips
- Support for different NEOPIXEL as defined in Adafruit_NeoPixel.h
- ability to setup startup brightness
- ability to define sequential/non-sequential transition of color change during heating-up
- additional parameter to M150 P<brightness>
2017-10-10 01:58:40 -05:00
Scott Lahteine
f835245ee1
Merge pull request #7908 from thinkyhead/bf1_goodbye_legacy_advance
...
[1.1.x] Remove legacy ADVANCE feature
2017-10-10 00:31:39 -05:00
Scott Lahteine
38110e220d
Segmented manual moves for kinematics
2017-10-09 23:10:17 -05:00
deram
9239fcf0da
Allow UBL G29 and G26 to build without a probe
2017-10-09 18:37:53 -05:00
Scott Lahteine
381ebc043f
Add support for ST7565-64128N
...
Based on #7447 by @Bob-the-Kuhn
2017-10-09 17:39:03 -05:00
jmdearras
c7e0a49c94
Add some new LCD displays
...
- Original CR-10
- MKS Mini Display
2017-10-09 17:39:03 -05:00
Scott Lahteine
067622fcc6
Apply some tweaks based on 2.0.x
2017-10-09 17:39:03 -05:00
Scott Lahteine
ae256576e1
Bring configs into parity with 2.0.x
2017-10-09 17:38:39 -05:00
Scott Lahteine
cbfcce09fa
Remove legacy ADVANCE feature
2017-10-09 04:27:45 -05:00
Scott Lahteine
a21201a713
LCD filename already concatentated
2017-10-07 15:14:58 -05:00
Scott Lahteine
53f2f188f2
LCD filename already concatenated
2017-10-07 15:11:28 -05:00
Scott Lahteine
a6e95c7d25
Fix display issue with SD_ALPHA_SORT caching
2017-10-07 15:07:05 -05:00
Dave Johnson
97e6663bb3
[1.1.x] Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled ( #7878 )
...
* Auto-enable DISABLE_REDUCED_ACCURACY_WARNING if HOME_AFTER_DEACTIVATE enabled
If HOME_AFTER_DEACTIVATE, there is no need to warn on LCD since printer will home prior to starting print. Saves 60 bytes PROGMEM.
add HD44780 too
* Reduce lines used
* Reduce lines used
2017-10-07 15:00:56 -05:00
Scott Lahteine
e2ceb1b800
Merge pull request #7632 from GMagician/Wrong-sanitycheck-message-fix
...
Addressing #7612
2017-10-07 02:25:35 -05:00
Scott Lahteine
8c93295d62
Merge pull request #7873 from thinkyhead/bf1_anet_encoder_pulses
...
[1.1.x] Fixing ANET encoder pulses
2017-10-07 01:21:14 -05:00
Phr3d13
c26242a553
Fixing #7833
2017-10-07 00:07:24 -05:00
Scott Lahteine
dac5f20a01
Patch SD file draw bug
2017-10-06 23:53:08 -05:00
Scott Lahteine
b211fa4e1f
Remove extra NEWPANEL settings in Conditionals_LCD.h
2017-10-06 17:23:32 -05:00
LVD-AC
355cba4aa7
Fixes for G33
2017-10-06 15:52:53 -05:00
Scott Lahteine
e287e14354
Tweak spacing in utf8_mapper.h
2017-10-06 15:11:27 -05:00
Scott Lahteine
5e63ba970d
Merge pull request #7862 from thinkyhead/bf1_mapper_c2c3c4_sk
...
[1.1.x] Added Slovak C2C3C4 mapper implementation.
2017-10-06 14:56:26 -05:00
Roman Moravčík
2a46ab288e
Added Slovak C2C3C4 mapper implementation.
2017-10-06 14:40:15 -05:00
Scott Lahteine
7999249a5c
Set TEMP_SENSOR_0 to 1 in CR-10 example config
...
As pointed out in #7692 by @totalitarian
2017-10-06 14:29:00 -05:00
Scott Lahteine
0ec9a7f090
Fix xon_xoff_state initialization
2017-10-04 12:10:15 -05:00
Scott Lahteine
a47c5c093d
Merge pull request #7459 from ejtagle/xon-xoff-sdxfer
...
[1.1.x] XON/XOFF serial handshake (for faster transfers to SD)
2017-10-02 23:52:41 -05:00
Scott Lahteine
bcb8722513
Fix DUAL_X_CARRIAGE manual move
...
Addressing #7745
2017-10-02 23:28:52 -05:00
Scott Lahteine
4c34b3ad9c
Stop redundant E4_IS_TMC2130 current control
2017-10-02 23:10:34 -05:00
Scott Lahteine
1b8b5c4b06
Make prepare_move_to_destination_dualx a full move function
2017-10-02 23:10:18 -05:00
Scott Lahteine
4e19ff75b6
XON/XOFF corrections, tweaks, formatting, etc.
2017-10-02 03:52:42 -05:00
Scott Lahteine
94caabf89a
Add XON/XOFF options to example configs
2017-10-02 03:52:41 -05:00
Scott Lahteine
f365448338
Merge pull request #7811 from thinkyhead/bf1_fix_resume_print
...
[1.1.x] Fix broken M600 resume_print
2017-10-01 22:54:34 -05:00
GMagician
8ab426c3a4
Updated all examples configurations
...
Forgot to update examples configurations. Done now
2017-10-01 21:04:12 -05:00
GMagician
33d28c24bf
Implementing [FR] #7548
...
Added new configuration to inhibit XYZ movements when home is not done
2017-10-01 21:02:42 -05:00
Scott Lahteine
ac70048945
Only MarlinConfig.h ahead of feature block
2017-10-01 20:55:14 -05:00
MasterPIC
40a4a716e1
Fix filament change bug in resume_print
...
Expected behaviour: while (auto)extruding the new filament, the nozzle should not move. It should move (from filament replacement position to printing position) only after the user has confirmed the successful filament replacement and extrusion.
Actual behaviour: while (auto)extruding the new filament, the nozzle moves from filament replacement position back to printing position.
So the extrusion step is mixed with the movement required to go back to the printing position.
The provided code seems to be working but probably a better fix is required.
2017-10-01 18:42:29 -05:00
Scott Lahteine
802f147686
Remove some excess whitepsace
2017-10-01 18:25:04 -05:00
Scott Lahteine
80a0f935a1
Fix G10-G11 by adding a synchronize
...
Based on #7792 by @tcm0116
2017-09-30 17:46:31 -05:00
MasterPIC
7f8ff0a724
Show leveling status on character LCD
2017-09-27 12:18:41 -05:00
Scott Lahteine
723a34d9c7
Add confirmation to Init EEPROM command
2017-09-27 11:27:47 -05:00
Scott Lahteine
2efd5b119d
Add USER_SCRIPT_RETURN option
2017-09-27 11:23:34 -05:00
Scott Lahteine
b105e47cb5
Move SERVO0 pin on GT2560 A+ with BLTOUCH enabled
...
Based on #7769
2017-09-27 10:39:44 -05:00
DecoyPlatypus
41dcbe89dd
Fixed ST7920_DELAY typo
...
Fixed typo where ST7920_DELAY_2 was being #defined after a check for #ifndef ST7920_DELAY_3
2017-09-27 03:01:09 -05:00
DecoyPlatypus
70a64355f6
Fixed LCD_FOR_MELZI SanityCheck
...
Sanity Check for LCD_FOR_MELZI would fail with "Please select no more than one LCD controller option" any time #define LCD_FOR_MELZI was enabled in Configuration.h, even if there were no other LCD options enabled.
2017-09-27 03:01:09 -05:00
Scott Lahteine
e37a1ded0d
Increase BABYSTEP_MULTIPLICATOR to 100
...
Ideally, it should be calculated based on Z steps per unit so that each
babystep corresponds to around 0.025mm. Smaller than this is largely
insignificant for typical layer heights.
2017-09-27 00:14:26 -05:00
Scott Lahteine
3e28243076
No need for LCD_PINS_Dn when unused
2017-09-27 00:12:20 -05:00
Scott Lahteine
bbb94b8f68
babystepping tweak
2017-09-27 00:12:20 -05:00
Scott Lahteine
a277b43e30
Fix babystep menu display
2017-09-27 00:12:20 -05:00
Scott Lahteine
8a994fb1b1
Fix encoder pulses for G3D_PANEL
2017-09-27 00:12:20 -05:00
Scott Lahteine
ac2ac99e15
Fix bad logic in autostart
...
As pointed out by @marcio-ao in #7638
2017-09-24 17:52:35 -05:00
Scott Lahteine
c1cc79176c
Full-featured Creality configs
2017-09-24 16:52:42 -05:00
Scott Lahteine
f25dccd6d1
Disable BABYSTEP_XY by default in all configs
2017-09-24 16:52:42 -05:00
Scott Lahteine
cd09a83cfa
Add size note to SDSORT_LIMIT
2017-09-24 16:52:41 -05:00
Scott Lahteine
9bbc2df217
General code cleanup, spacing
2017-09-24 16:52:41 -05:00
Luc Van Daele
74d430cb97
matrix names update ( #7697 )
...
* matrix names update
* symplified names
* new angle normalization
* ABC
* axis
* least squares
* recalc_delta_settings
* endstop_adj
* 0p
* bug
2017-09-24 01:45:31 -05:00
Scott Lahteine
9d4d53e2fd
Update links to old wiki page
2017-09-23 22:06:45 -05:00
Scott Lahteine
00896f1713
Fix LEVEL_BED_CORNERS (No leveling required)
2017-09-23 22:00:45 -05:00
Scott Lahteine
c3a9e95a5f
Define drawmenu items once, in ultralcd.cpp
2017-09-23 22:00:45 -05:00
Scott Lahteine
0afd25a010
Fix caselight compile issues
2017-09-23 22:00:44 -05:00
GMagician
5b87843fae
Addressing #7612
...
Replaced extruder with hotend
2017-09-07 19:07:36 +02:00
Scott Lahteine
386b74f8c2
Merge pull request #7593 from marcio-ao/bugfix-1.1.x
...
Added option for graphical overlay for Z-offset (Resubmission of #7350 and #7586 )
2017-09-02 00:01:38 -05:00
Tannoo
2a963fb5d1
UBL LCD Bugfixes ( #7598 )
2017-09-01 16:59:06 -05:00
Marcio Teixeira
d69c5317df
Added option for graphical overlay for Z-offset
2017-08-31 14:21:39 -06:00
Scott Lahteine
367e1b54ba
Merge pull request #7591 from thinkyhead/bf1_misc_patches
...
M111: no args reports current flags
2017-08-31 15:19:29 -05:00
Scott Lahteine
8a184a526a
Marlin: Patch G33, allow M111 to give status
2017-08-31 14:35:00 -05:00
Scott Lahteine
353c23b16e
Enforce BED_CENTER_AT_0_0 on Delta, SCARA
2017-08-31 14:34:59 -05:00
Scott Lahteine
898f48e331
CNC workspace planes for G5
...
According to LinuxCNC, G5 should throw an error if the current plane mode isn't XY.
2017-08-31 14:29:29 -05:00
Scott Lahteine
5851c2d36f
MAX7219 followup ( #7564 )
...
* Add MAX7219_DEBUG to Travis CI testing
* Tweak config and use standard pin naming for MAX7219_DEBUG
* MAX7219: Apply coding standards, use macros, etc.
* Make code work...
2017-08-31 11:44:43 -05:00
Scott Lahteine
52073f21c5
Merge pull request #7556 from thinkyhead/bf1_slovak_language
...
Slovak UTF-8 translation
2017-08-27 21:05:53 -05:00
Scott Lahteine
321f98f867
Fix servo delay in Folgertech config
2017-08-27 20:53:27 -05:00
jneilliii
36771e9492
Fixes required for Creality CR-10
2017-08-27 20:39:16 -05:00
Roxy-3D
3f0b38ed5d
Add Max7219 LED Matrix Debug Support ( #7563 )
...
* Add Max7219 LED Matrix Debug Support
The Max7219 8x8 LED Matrix's are very helpful for debugging new code.
And for that matter, just trying to maximize printer settings without
causing stuttering.
The displays are very inexpensive (under $2.00 with shipping) and
provide a lot of help when trying to debug complicated code.
* Try to keep Makefile up to date.
2017-08-25 17:03:07 -05:00
GMagician
0067bb2840
Addressing #7552
...
When M405 is used it changes 'volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM]' value. When M406 disables M405 it leaves the value unchanged.
This PR applies 'calculate_volumetric_multipliers' in M406 instead of resetting it to 1.0 because M200 may not be compatible with M405 hence I'm sure to restore anyway with correct value.
2017-08-25 03:23:16 -05:00
Scott Lahteine
2b12093589
Merge pull request #7532 from thinkyhead/bf1_fan_mux_vben
...
New feature: Part-Cooling Fan Multiplexer
2017-08-25 03:16:40 -05:00
Michal Holes
54d48130f3
Slovak UTF-8 translation
...
Slovak UTF-8 translation
2017-08-23 19:14:35 -05:00
Scott Lahteine
86c024ce98
Organize, document pins.h include lines
2017-08-23 18:33:00 -05:00
Scott Lahteine
c7b07d20f2
Minor patches to pins files
2017-08-23 18:32:59 -05:00
Scott Lahteine
356af7dcb0
Tweak Sanguinololu-related pins files
2017-08-23 18:32:59 -05:00
Scott Lahteine
11a724d8fc
Sanguinololu example configuration
2017-08-23 18:32:59 -05:00
Scott Lahteine
e337df2e98
Miscellaneous tweaks to serial outputs, code cleanups
2017-08-23 18:32:58 -05:00
Vben
c0409b85e7
New feature: Part-Cooling Fan Multiplexer
2017-08-18 15:59:04 -05:00
Scott Lahteine
e82e9073d6
Merge pull request #7530 from GMagician/Code-reduction
...
Code reduction with some configurations
2017-08-18 13:57:59 -05:00
GMagician
6127154af3
Fix identation by tab
...
There was a tab instead of spaces
2017-08-18 11:34:55 +02:00
GMagician
b94a1c6b9f
Code reduction this some configurations
...
When switching noozle and extruder but these operations are done by the same servo in 'setup' function there is a unnecessary call
2017-08-18 11:11:00 +02:00
GMagician
405a2132f3
#7529 compile fix
...
I made an error in previous fix
2017-08-17 22:04:28 +02:00
GMagician
869d7f3703
#7504 missing part
...
#7504 integration has missed this part.
When more than 1 servo is used with bltouch it's impossible to predefine default servo delay for it.
In my original fix I completely removed this part but maybe this is a better compromise
2017-08-17 21:43:47 +02:00
Scott Lahteine
101ba70517
Merge pull request #7505 from thinkyhead/bf1_anet_1_pio
...
Add Anet 1.0 to Platformio.ini
2017-08-17 00:33:20 -05:00
Vben
4817b39d98
Added new feature for AutoParking Extruder (APE)
2017-08-16 17:33:11 -05:00
Scott Lahteine
6772e33ef6
Use [XY]_CENTER for error correction
...
Followup to #7512
2017-08-16 16:13:09 -05:00
Scott Lahteine
385f1bb9e5
Merge pull request #7504 from thinkyhead/bf1_servo_delays
...
Individual servo delays
2017-08-16 16:05:22 -05:00
Scott Lahteine
2a31c9f2ce
Merge pull request #7515 from cdedwards/bugfix-1.1.x
...
Fix for G26 spam output
2017-08-16 16:01:10 -05:00
MTrab
5fa61c0ad3
Add Anet 1.0 to Platformio.ini
...
Added env:anet10 to platformio.ini for easy compile and upload to this board
2017-08-16 15:59:20 -05:00
Scott Lahteine
b3f59ec945
Merge pull request #7519 from thinkyhead/bf1_cleanups_aug_16
...
Add "Level Corners" menu item
2017-08-16 15:58:15 -05:00
Tannoo
b33739d493
UBL_Language_Update ( #7520 )
...
* UBL_Language_Update
Translatable strings
* Use slightly better wording...
* Use slightly better wording...
2017-08-16 09:49:04 -05:00
Scott Lahteine
a1878cd1c0
Add "Level Corners" menu option
2017-08-16 02:54:33 -05:00
Scott Lahteine
0a18fb735e
Use "PSU" label to fit on screen
2017-08-16 02:51:00 -05:00
Scott Lahteine
30887feae3
Tweak some formatting in ABL G29
2017-08-16 02:51:00 -05:00
Thomas Moore
257b693ab0
Advanced pause fixes ( #7518 )
...
* Disallow filament change while paused
* Use kinematic movemements in pause_print and resume_print
2017-08-15 22:57:13 -05:00
Tannoo
ab2ac1af71
UBL_LCD_storage_corrections ( #7517 )
...
Correcting the storage selection.
Also EEPROM error handling on the LCD.
2017-08-15 21:01:11 -05:00
cdedwards
f1843211e6
Fix for G26 spam output
...
while heating, G26 will continuously spam the heater states instead of printing it out every 5000ms.
2017-08-15 17:04:53 -06:00
Roxy-3D
be5ca34215
Allow G29 to work correctly even if nozzle is off the mesh. ( #7512 )
...
* work around previous regressions...
2017-08-15 17:04:52 -05:00
Scott Lahteine
06541ec885
Merge pull request #7448 from thinkyhead/bf1_delta_fixes
...
Prevent damage if DELTA_HEIGHT is set badly
2017-08-15 16:35:09 -05:00
GMagician
e9c72978c7
Implement SERVO_DELAY as array
...
This modify give SERVO_DELAY x servo basis
2017-08-15 00:28:47 -05:00
Scott Lahteine
96ae53cf41
Use MOVE_SERVO macro where possible
2017-08-15 00:28:39 -05:00
Scott Lahteine
3be9c19f12
Hold on move axis screens
2017-08-14 22:51:47 -05:00
Scott Lahteine
8fd58cd6dc
Patch goto labels for consistency
2017-08-14 22:51:47 -05:00
Scott Lahteine
75e6f72c89
Fix hexadecimal number formatting
2017-08-14 22:50:44 -05:00
Scott Lahteine
ac76101ec3
Eliminate goto in gcode_M48
2017-08-11 17:00:40 -05:00
Scott Lahteine
75e6ead5fd
Eliminate goto in gcode_G33
2017-08-11 17:00:40 -05:00
Scott Lahteine
6bd63d27b5
Updates to G29 for probe error handling
2017-08-11 17:00:40 -05:00
Thomas Moore
f54e0fc90f
Prevent damage if DELTA_HEIGHT is incorrect
2017-08-11 16:09:14 -05:00
Scott Lahteine
0938c62b48
Neater position_is_reachable call
2017-08-11 15:55:32 -05:00
Scott Lahteine
9d95b1b4df
Tweak Conditionals_post.h
2017-08-11 15:55:32 -05:00
Scott Lahteine
35d5a7bdff
Tweak CR-10 config/pins
2017-08-11 15:55:31 -05:00
Scott Lahteine
419c8969a7
Merge pull request #7479 from thinkyhead/bf1_fix_italian
...
Fix Italian string length
2017-08-10 18:42:35 -05:00
Frederik Kemner
25a11cd485
Use bed size and inset instead of travel limits to define mesh area\n\nAs proposed in #7435 ( #7480 )
2017-08-10 16:53:04 -05:00
Scott Lahteine
7f3406d47b
Fix Italian string length
...
Addressing #7264
2017-08-10 15:41:35 -05:00
etagle
2864ef8c7f
Slight improvement to the line parsing logic, saving 8 cycles per character
2017-08-08 02:57:55 -03:00
etagle
534bbb81ff
Adding XON/XOFF and STATISTICS implementation
2017-08-08 02:46:37 -03:00
etagle
3e5485de92
Enforcing requirements so XON/XOFF software handshake works and no drops of data are experienced while transferring data to an SD Card. I tested this with a CH340 USB to serial adapter (quite typical) at baudrates as high as 1000000 on a Atmega2560 running at 16Mhz, with no problems at all. We need a 1024 byte RX buffer. Less than that and we will have drops, higher than that is not needed
2017-08-08 02:30:04 -03:00
etagle
9e147e9ac4
Adding XON/XOFF and STATISTICS configuration settings and proper documentation on their usage for serial port
2017-08-08 02:22:33 -03:00
etagle
8ab2e420f6
Adding separate RX_BUFFER_SIZE configuration setting and proper documentation on its usage
2017-08-08 02:18:42 -03:00
etagle
b4c53af07d
Adding a new macro to be able to determine if a given integer value is a power of 2
2017-08-08 02:09:50 -03:00
Jozsef Kiraly
97c21e9007
Support for Geeetech GT2560 Rev.A/Rev.A+
2017-08-06 00:42:54 -05:00
Scott Lahteine
b2822a59f9
Add a sanity check for valid bed size
2017-08-05 03:49:04 -05:00
Scott Lahteine
a7e5c1bf19
Use float to init TMC2133 steps-per-mm
2017-08-05 03:48:52 -05:00
Scott Lahteine
dd66d21749
Extend DEACTIVATE_SERVOS_AFTER_MOVE sanity-check
...
As proposed in #7429
2017-08-05 03:48:52 -05:00
richarddeweerd
b370906031
Example config for Geeetech I3 Pro X with GT2560 controller
2017-08-05 03:48:52 -05:00
Scott Lahteine
804818b4d9
Bring configs up to date
2017-08-05 03:48:52 -05:00
Scott Lahteine
dd841a3675
Merge pull request #7410 from benlye/user-script-feedback
...
Make audible user script feedback optional
2017-08-05 02:59:56 -05:00
Florian Heilmann
0fd2923a9f
Fix compilation with ADVANCED_PAUSE_FEATURE without SDSUPPORT ( #7412 )
...
* Fix compilation of ADVANCED_PAUSE_FEATURE without SDSUPPORT
* Fix Identation
* Make use of IS_SD_PRINTING macro
as per @MagoKimbra
2017-08-05 02:58:38 -05:00
benlye
24af9e1bf4
Make audible user script feedback optional
...
Add a parameter to enable/disable audible user script feedback
2017-08-04 17:24:10 +01:00
Florian Heilmann
6827a162bb
Update language_de.h
...
Add
MSG_BLTOUCH
MSG_DELTA_SETTINGS
MSG_UBL_MESH_EDIT
MSG_UBL_OUTPUT_MAP_BACKUP
MSG_UBL_STEP_BY_STEP_MENU
MSG_Z_FADE_HEIGHT
2017-08-04 09:35:21 +02:00
Scott Lahteine
3497153cf1
Followup cleanup patch
...
Fix regression in #7428
2017-08-03 14:55:22 -05:00
Scott Lahteine
16f8c4865a
Merge pull request #7409 from FHeilmann/bf_update_ru_translation
...
Update Russian Translation
2017-08-03 14:54:40 -05:00
Scott Lahteine
622048ffb0
Clean up whitespace, trailing space, bad tab conversion, etc.
2017-08-03 11:20:03 -05:00
Roxy-3D
2cbdc0ebb6
Fix large Z corrections when nozzle moves off of UBL mesh ( #7415 )
2017-08-02 16:51:04 -05:00
Florian Heilmann
650e5274c4
Update Russian Translation
2017-08-02 21:19:15 +02:00
Scott Lahteine
ce65c13a97
Merge pull request #7398 from fiveangle/bf_lcd_bed_level_requirements
...
Clarify LCD_BED_LEVELING requirements
2017-08-01 17:46:07 -05:00
Dave Johnson
936dfb965c
Clarify LCD_BED_LEVELING requirements
...
LCD_BED_LEVELING requires PROBE_MANUALLY with auto bed leveling enabled. See #7396
2017-08-01 14:13:54 -07:00
Kai
ffe3013bb5
Fix for #7395
...
Filament change causes freeze during paused print. This PR disables Filament change in the prepare menu when a print from SD Card is paused. See #7395
2017-08-01 21:45:41 +02:00
Øystein Krog
e948f77cf9
Fix DUAL_X_CARRIAGE not moving at all
...
Axis would only move when homing.
Bug introduced in 91841d75c9
.
Fixes #6956 , fixes #7050 and fixes #7291
2017-07-31 18:44:26 +02:00
Scott Lahteine
08b0456d91
Merge pull request #7379 from thinkyhead/bf_manual_bed_level_floor
...
Manual Bed Leveling: Goto previous Z height at each probe point
2017-07-30 05:41:12 -05:00
teemuatlut
936d00dda8
Implement probing delay for piezo sensors
2017-07-29 21:46:40 -05:00
Scott Lahteine
29eef360d0
Merge pull request #7308 from thinkyhead/bf_cleanup_config_adv
...
Fixes for FWRETRACT
2017-07-29 21:20:19 -05:00
Wilfried Chauveau
894608f8a3
Manual Bed Leveling: Goto previous Z height at each probe point
2017-07-29 21:15:37 -05:00
Scott Lahteine
ff06e1a030
Merge pull request #7372 from tcm0116/delta_calib_menu
...
Move Delta Calibration menu to the Prepare menu
2017-07-29 21:05:03 -05:00
Thomas Moore
15e009b6ca
Move Delta Calibration menu to the Prepare menu
2017-07-28 08:33:18 -05:00
Scott Lahteine
bfd396c13a
Patch to fix some compiler warnings
2017-07-28 02:27:16 -05:00
Scott Lahteine
48c5f3dddf
Tweak kill action #ifdef
2017-07-27 23:42:01 -05:00
Scott Lahteine
be7a9a07c5
Don't reset grid with G29 Q
+ PROBE_MANUALLY
2017-07-27 22:47:43 -05:00
Scott Lahteine
dfe670247d
Merge pull request #7363 from marcio-ao/bugfix-1.1.x
...
Makefile fixes and U8G support.
2017-07-27 21:31:56 -05:00
Marcio Teixeira
af83c512b8
Added support for U8G.
2017-07-27 07:49:25 -06:00
Scott Lahteine
4eff18854b
Rename options with swap_ prefix
2017-07-27 04:14:29 -05:00
Scott Lahteine
14482d2f2a
Strip auto-retract for impossible M(IN|AX)_AUTORETRACT combo
2017-07-27 04:14:29 -05:00
Scott Lahteine
9fc72422e4
Don't let the flow multiplier affect retract/recover length
2017-07-27 04:14:29 -05:00
Scott Lahteine
fee696db5d
Improve retract() for G10/G11/autoretract
2017-07-27 04:14:29 -05:00
Scott Lahteine
423b0f3a1e
Replace MIN_RETRACT with MIN_AUTORETRACT, MAX_AUTORETRACT
2017-07-27 04:14:29 -05:00
Scott Lahteine
51864fd365
Add bed size as a configuration option
2017-07-26 23:04:54 -05:00
Scott Lahteine
dc7c95e07b
Remove @ section fwretract
2017-07-26 22:46:16 -05:00
Dave Johnson
4718c09c48
Remove extraneous USBCON defines for AT90USB boards
...
USBCON is definied by serial.h pullikng in MarlinConfig.h which in turn pulls in Arduino.h. Defining in later includes has shown to cause compile issues so removing all extraneous calls for and potentially easier future linker troubleshooting.
more USBCON unification
2017-07-23 16:41:48 -07:00
C. Scott Ananian
890e7a16a9
Add support for Printrbot Neopixel RGBW strip.
...
Connected as described at http://printrbot.com/shop/led-strip/
Based on patch by Kelly Anderson <kelly@xilka.com> at
http://www.xilka.com/printrbot/marlin/1.1.4/20170707/
2017-07-22 16:07:55 -05:00
Scott Lahteine
a059e95463
Bring Infitary i3 config up to date
2017-07-21 20:49:19 -05:00
Scott Lahteine
d6d6043548
Merge pull request #7338 from thinkyhead/bf_mks_ps_on_pin
...
MKS 1.3+: Add pin mapping for PS_ON
2017-07-21 20:00:26 -05:00
Alexey Shvetsov
851f9f5399
Update Russian translation - Part 1
...
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
2017-07-21 19:32:37 -05:00
Scott Lahteine
b7a16e4468
Merge pull request #7315 from fixoid/patch-1
...
Fixing SWITCHING_EXTRUDER feature to work with HOTENDS > 1
2017-07-21 19:10:54 -05:00
Alexey Shvetsov
f38b8c5bf8
MKS 1.3+: Add pin mapping for PS_ON
...
This allows the use of D4 as PS_ON since MKS Gen doesn't have a PS_ON pin. However this effectively allows only 3 servos (instead of 4).
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
2017-07-21 18:50:05 -05:00
Scott Lahteine
8a3bc6be4d
Improve FWRETRACT config options and commentary
...
Add more details as requested in #7198
2017-07-20 22:57:50 -05:00
Scott Lahteine
b0173ccdb9
Drop extra initializers for vars initialized by EEPROM code
2017-07-20 22:57:49 -05:00
Scott Lahteine
7afafb05b8
Split G10/G11 into separate functions
2017-07-20 02:24:13 -05:00
Scott Lahteine
c45798694f
Add some more requirements to the G-code list
2017-07-20 02:24:13 -05:00
Scott Lahteine
72de280c1e
BARICUDA valve pressure consistently uint8_t
2017-07-20 02:21:40 -05:00
Scott Lahteine
4d98e3f0a7
General cleanup
2017-07-20 02:21:40 -05:00
fixoid
e530c67349
Fixing SWITCHING_EXTRUDER feature
2017-07-19 21:15:26 +03:00
Tannoo
2ad3ca5d8a
Bugfix ( #7310 )
2017-07-18 22:55:14 -05:00
Roxy-3D
37a6833d7e
Allow the sampled point to be added into the Least Squares Best Fit ( #7289 )
...
Without this... The LSF won't work because none of the sampled points
in this code block get added.
2017-07-13 16:33:02 -05:00
C. Scott Ananian
a519b093b9
Fix build by replacing qr_solve by least_squares_fit. ( #7285 )
...
This was broken by 9af67e2446
.
2017-07-13 12:02:15 -05:00
Scott Lahteine
0873c667fa
Apply coding standards to recent merges
2017-07-13 00:46:16 -05:00
Scott Lahteine
8c2907d10f
Fix ABL broken by recent change
2017-07-12 22:56:18 -05:00
Roxy-3D
9af67e2446
Save 7714 bytes of program memory when doing AUTO_BED_LEVELING_LINEAR ( #7276 )
...
We can save more and a pile of RAM by eleminating the eqnBVector and
EqnAMatrix arrays next.
2017-07-10 19:05:11 -05:00
Scott Lahteine
76e90b93b7
Volatile keyword not needed for parser.seen
2017-07-10 15:38:54 -05:00
Jamie Bainbridge
00e4ced58e
Stay in User Menu after command. Add feedback.
...
When a user executes a User Menu command, the LCD returns to the main menu. If the user has multiple menu items they want to run, such as one menu item per bed leveling corner, then it's better to stay in the User Menu rather than return to the main menu.
This PR modifies Marlin to stay in the User Menu after a command.
2017-07-10 13:47:12 -05:00
Scott Lahteine
1066b17457
Merge pull request #7260 from thinkyhead/bf_G33_update_27
...
Updates to G33 and its LCD code
2017-07-10 13:39:36 -05:00
Tannoo
e927941c06
Bugfix ( #7265 )
...
Fix compile error when UBL is enabled but there is no LCD Panel.
2017-07-08 09:44:50 -05:00
Scott Lahteine
68aea9c01d
Merge pull request #7261 from thinkyhead/bf_configs_by_vendor
...
Arrange more example configs by vendor
2017-07-07 15:46:22 -05:00
Tannoo
aaacef9441
Corrections ( #7231 )
...
20x4 map integration. Also some minor changes to the UBL Menu layout. Both 20x4 LCD's and Graphical LCD panels should have similar functionality now.
2017-07-07 11:05:08 -05:00
LVD-AC
4bc79ec877
Updates for G33-LCD interface
2017-07-07 05:00:59 -05:00
Scott Lahteine
186580b55f
Arrange example configurations by vendor
2017-07-07 04:48:23 -05:00
Scott Lahteine
6be369f3ea
Add some config names to AUTHOR
2017-07-07 04:46:33 -05:00
Scott Lahteine
7fc31a7940
Merge pull request #7258 from thinkyhead/bf_cleanups_jbrazio
...
Add support for BQ heated bed kit with Hephestos 2
2017-07-07 04:11:07 -05:00
Scott Lahteine
11e376e920
Merge pull request #7256 from thinkyhead/bf_cleanup_july_6
...
Assign -1 to LCD_PINS_D4-7 if not defined
2017-07-07 03:22:47 -05:00
João Brázio
2065591daf
Add support for BQ heated bed kit with Hephestos 2
2017-07-07 03:10:38 -05:00
essgcee
61be28133d
Support for Creality CR-10
...
Creality board is a Melzi / Sanguinololu variant, but using different pins for LCD control (and maybe other minor variations)
2017-07-06 23:08:10 -05:00
Scott Lahteine
9248a90a4c
Assign -1 to LCD_PINS_D4-7 if not defined
2017-07-06 22:47:51 -05:00
Scott Lahteine
5ef1e5ef60
Tweaks for M43
2017-07-06 21:47:50 -05:00
Scott Lahteine
c7732db99d
Fix: Use of digitalRead, digitalWrite breaks on AT90USB
2017-07-06 21:25:56 -05:00
Scott Lahteine
f713f25fa5
Clean up excess whitespace
2017-07-06 21:24:30 -05:00
Scott Lahteine
fc9ce65095
Add BUSY_WHILE_HEATING
for hosts that need it
2017-07-06 16:28:57 -05:00
Scott Lahteine
c6d430670a
Clear SHOW_BOOTSCREEN with no LCD
2017-07-06 14:21:27 -05:00
Scott Lahteine
11c589c3ec
Fix compile issue with G38
...
Fixes #7250
2017-07-06 14:21:27 -05:00
Scott Lahteine
678914be25
Patch M23 to work around Simplify3D bug
...
Addressing #7227
2017-07-06 14:00:58 -05:00
LVD-AC
3efe4aeef8
Add PROBE_MANUALLY support to G33
2017-07-04 18:06:54 -05:00
Scott Lahteine
cca1cca3a5
Merge pull request #7237 from thinkyhead/bf_cz_mapper
...
UTF-8 mapper for Czech
2017-07-04 16:45:13 -05:00
Scott Lahteine
a2babb532d
Merge pull request #7217 from benlye/add-kill-action
...
Add configurable action command to send when printer is killed
2017-07-04 16:44:08 -05:00
Petr Zahradník
8c34233452
UTF-8 mapper for Czech
2017-07-04 15:51:23 -05:00
Dave Johnson
20f6676d63
DISABLE_[XYZ] compatibility check
...
DISABLE_[XYZ] is incompatible with HOME_AFTER_DEACTIVATE and Z_SAFE_HOMING
2017-07-03 17:23:53 -07:00
Ben Lye
c28749a567
Add kill action
...
Sends pre-defined string as action command when printer is kill.
2017-07-03 23:45:19 +01:00
Scott Lahteine
df87278fce
Add "CAP:PRINT_JOB:1" (M75 / M76 / M77) to M115 output
2017-07-03 15:59:06 -05:00
Scott Lahteine
4be8d7720e
Fix spelling of "Chinese"
2017-07-03 15:24:49 -05:00
LVD-AC
567941e341
Fix for issues #6997 and #7152
...
Probing with the effector in the printing area, but an eccentric probe (e.g. allen key) outside it but still touching the bed gives meaninfull information for calibration. Since calibration is most accurate when probing as close to the towers as possible the testing was way to restrictive hence this fix.
2017-07-03 02:53:49 -05:00
Scott Lahteine
57fff2e95e
Merge pull request #7219 from thinkyhead/bf_update_git_scripts
...
Update Marlin+git helper scripts
2017-07-03 01:49:27 -05:00