MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
9,572 Commits 1 Branch 0 Tags 96 MiB
e5fbbbc068
Commit Graph

7920 Commits

Author SHA1 Message Date
Scott Lahteine
8c7e98627f Patch do_blocking_move_to so 'destination' can be used 2018-03-12 08:06:48 -05:00
Scott Lahteine
656c3c3b2a Followup to auto-assign dual axis CS pins 2018-03-12 07:23:02 -05:00
Scott Lahteine
9ec8762497 Fix typo in ubl.prepare_segmented_line_to 2018-03-11 10:22:52 -05:00
Scott Lahteine
33b18dc801 Add Z_AFTER_PROBING to example configs 2018-03-11 09:48:03 -05:00
Scott Lahteine
0aa100a31e Add Z_AFTER_PROBING option 
Some fix-mounted probes need manual stowing. And after probing some may prefer to raise or lower the nozzle. This restores an old option but tailors it to allow raise or lower as preferred.
 2018-03-11 09:48:02 -05:00
Scott Lahteine
879b54a8bc
Auto-assign CS pins for X2, Y2, Z2 (#10056) 
Fixes #9211
 2018-03-11 09:25:02 -05:00
Scott Lahteine
d1256be7ec FlushSerialRequestResend => flush_and_request_resend 2018-03-11 07:34:21 -05:00
Scott Lahteine
eb6f44372e Finish scroll_screen, fixing direction/multiplier 
Fixes #10041
 2018-03-11 04:44:28 -05:00
Scott Lahteine
b0abce5a7e Disambiguate 'else' in stepper code 2018-03-10 21:47:08 -06:00
Scott Lahteine
72df10c669
Merge pull request #10038 from thinkyhead/bf1_dual_endstops_offsets 
[1.1.x] Dual XYZ endstops parity with 2.0.x
 2018-03-10 07:17:20 -06:00
Sebastianv650
b8f1b74abd [1.1.x] Silence M204 (#10036) 
`M204` is often used by slicers to set acceleration depending on perimeter, infill, etc., so Marlin's answers are flooding the serial windows. Silence `M204` according to the philosophy that setter commands should only send a reply if no parameter is given.
 2018-03-10 07:15:52 -06:00
Scott Lahteine
e8fc0e9a57 Move [xyz]_endstop_adj to Endstops class 2018-03-10 06:54:18 -06:00
Scott Lahteine
4b5a42f86a Tweaks to E2END, mesh slot offset 2018-03-10 06:54:18 -06:00
Scott Lahteine
83c83e3127 Update Marlin G-codes summary 2018-03-10 06:54:18 -06:00
Scott Lahteine
5ce64f6d16 Combine __AVR__ and USBCON for 2.0.x parity 2018-03-10 01:51:35 -06:00
Scott Lahteine
cce80fd41c Add UNKNOWN_Z_NO_RAISE to example configs 2018-03-09 23:11:35 -06:00
Scott Lahteine
1b79217fbc Add UNKNOWN_Z_NO_RAISE option 
With this option enabled, Z won't ever be raised until after `G28` has been completed, and it won't raise if Z becomes unknown. This is good for machines whose beds fall when Z is powered off.
 2018-03-09 23:11:35 -06:00
Scott Lahteine
192507b524 Move do_probe_raise closer to set_probe_deployed 
…and limit the raise to Z_MAX_POS
 2018-03-09 23:03:12 -06:00
Scott Lahteine
0d13c5d077 Fix position_is_reachable_by_probe, add comments 
Fix #10029
 2018-03-09 21:18:50 -06:00
Roxy-3D
fd3e243989
prevent steppers from turning off during manual probes 2018-03-09 17:54:41 -07:00
Scott Lahteine
12b697c5cd Fix UPDATE_ENDSTOP for CorePQ compatibility 
Fixes #9939
 2018-03-09 08:49:44 -06:00
Scott Lahteine
03676d8e2f Fix _tmc_say_axis string address 
Fixes #10003
 2018-03-09 06:07:52 -06:00
Scott Lahteine
3c6d2d7711 Add more delay before pulse off in Linear Advance ISR 
A capital idea from https://github.com/MarlinFirmware/Marlin/pull/9914#issuecomment-371614153
 2018-03-09 05:24:10 -06:00
Scott Lahteine
a9392c6b27 Set a safe default MINIMUM_STEPPER_PULSE of 2 2018-03-09 03:59:18 -06:00
Scott Lahteine
fa12866de3
Have position_is_reachable_by_probe use the whole bed (#10019) 
Previously `position_is_reachable_by_probe` was limited to the area specified for `G29` mesh leveling (even if leveling was disabled). This change will properly consider the entire bed area so that `G30` and other non-leveling probing may take place.
 2018-03-09 03:38:00 -06:00
Scott Lahteine
9508f9ec75 Fix: utility.h requires types.h 2018-03-09 03:33:25 -06:00
Scott Lahteine
beb7e2ed93 Allow servo.cpp to use safe_delay 2018-03-09 03:07:55 -06:00
Scott Lahteine
f24cdf1081
Add Einsy RAMBo board (#10018) 2018-03-09 01:40:34 -06:00
Scott Lahteine
ba1c2a9819 Update servo.* for parity with 2.0.x 2018-03-08 19:32:32 -06:00
Scott Lahteine
e5e3c3ff35
Update powersupply_on in power_on/off (#10014) 
Fix #10004
 2018-03-08 18:56:41 -06:00
Scott Lahteine
9c667b5436 Init old_red to 127 to ensure initial change 
Fix #10012
 2018-03-08 18:27:39 -06:00
Scott Lahteine
de8fbdea6d Init watchdog last in setup() 2018-03-08 17:36:01 -06:00
Scott Lahteine
282170a259 Tweak manual move eindex arg 2018-03-08 16:26:11 -06:00
Scott Lahteine
31980f01ba Wrap stepper_indirection macros in do{}while(0) 2018-03-08 16:23:49 -06:00
Scott Lahteine
dcd2fa9291 Fix compile error with MAX_MESSAGE_LENGTH 
Fix #9988
 2018-03-07 21:58:19 -06:00
Bob-the-Kuhn
179de4423d remove conditional download of custom character RAM 2018-03-07 17:50:18 -06:00
Scott Lahteine
d11ed30584 Fix compile error with char LCD 
Followup to f177da4
 2018-03-07 16:53:03 -06:00
Scott Lahteine
1381b5d57d Fix LA_active_extruder (static) 2018-03-07 05:50:35 -06:00
Scott Lahteine
63d6dddae1 Wrap stepper_indirection macros 2018-03-07 05:45:30 -06:00
Sebastianv650
e5d69d313c Fix for LA (#9965) 
Missed in the original LA 1.5 PR: eISR has to use a local copy of
current_block->use_advance_lead because it might still run wenn the last
block has been set to NULL.
 2018-03-07 05:32:49 -06:00
Scott Lahteine
f177da45bb Fix encoder position for sddirectory 2018-03-07 05:20:15 -06:00
Scott Lahteine
dc40b3ec00 Suspend auto-report during UBL map output 2018-03-07 01:58:37 -06:00
Scott Lahteine
e7d519c898 Add suspend_auto_report flag to suppress auto-report 2018-03-07 01:58:37 -06:00
Scott Lahteine
2bf1bbf399 Add HAS_TEMP_SENSOR conditional 2018-03-07 01:58:31 -06:00
Scott Lahteine
2d0d5eccd8 Move AUTO_REPORT_SD_STATUS to SDSUPPORT block 2018-03-07 01:58:31 -06:00
Scott Lahteine
1f77930e01
Rebuild SD file sort array on Stop SD Print (#9975) 
Thanks Chuck Hellebuyck.
 2018-03-07 01:42:30 -06:00
Scott Lahteine
1ed1882766 Strip extra newline 2018-03-07 00:22:31 -06:00
Scott Lahteine
dc733192be Add AUTO_REPORT_SD_STATUS to example configs 2018-03-07 00:06:17 -06:00
Scott Lahteine
fb9de6e787 Add AUTO_REPORT_SD_STATUS feature 
For parity with 2.0.x ahead of 1.1.9 release.
 2018-03-07 00:06:03 -06:00
Scott Lahteine
ecddd2a655 Make enums into implicit char 2018-03-06 23:36:56 -06:00
Scott Lahteine
fa998178e9 Move extended_axis_codes to PROGMEM 2018-03-06 22:20:35 -06:00
Scott Lahteine
73aa7ffff9 LIN_ADVANCE single stepper optimization 2018-03-06 19:27:43 -06:00
Scott Lahteine
50ad30259f Support duplication mode in LIN_ADVANCE 2018-03-06 19:12:54 -06:00
Scott Lahteine
fa3492fc6e Support DISTINCT_E_FACTORS in tmc_util.cpp 2018-03-06 18:34:43 -06:00
Scott Lahteine
536fa07ed5 Show E0-E4 in monitor_tmc_driver output 
Fix #9966
 2018-03-06 18:27:37 -06:00
Scott Lahteine
828dea2ee0
Improvements to Lightweight ST7920 status screen. (#9960) 
- Show units on lightweight status screen.
- Fixed progress bar so it works with M73
 2018-03-06 01:49:45 -06:00
Scott Lahteine
3bae28a5e1
Put more code between pulse start and stop (#9956) 2018-03-05 23:05:42 -06:00
Scott Lahteine
70e9c07b2d
Fix menu highlight glitch, tweak scrolling code (#9954) 2018-03-05 23:05:05 -06:00
Scott Lahteine
0b016c08c9 M851 - report only with no Z parameter 2018-03-05 02:10:32 -06:00
Scott Lahteine
890a396a2a
Import FilamentRunoutSensor with debounce (#9947) 2018-03-05 01:49:19 -06:00
Scott Lahteine
b01f10dfac Fix custom bootscreen compiler warning 2018-03-04 23:37:32 -06:00
Scott Lahteine
f0d8d76f68
Use static classes for job timers (#9940) 2018-03-04 22:52:25 -06:00
Sebastianv650
bc08ce86be Fix broken reverse planner (#9914) 
See MarlinFirmware/Marlin#9913 for details.
 2018-03-04 21:18:35 -06:00
Scott Lahteine
081ab35e82 Remove some trailing whitespace 2018-03-04 21:13:36 -06:00
Scott Lahteine
eacb8346af Fix #9904 - toDigital should show 00-99 hours 2018-03-04 15:03:31 -06:00
Scott Lahteine
d77be210c1 Fix EXTRA_CYCLES_E handling in LIN_ADVANCE 2018-03-04 15:03:31 -06:00
teemuatlut
36a94ac586 Fix M915 compiling 2018-03-04 11:26:30 +02:00
Scott Lahteine
5ad60d89a8 autotemp_factor is not value_celsius_diff 
See https://github.com/MarlinFirmware/Marlin/issues/9852#issuecomment-369861822
 2018-03-03 23:29:35 -06:00
Thomas Moore
bdfeb54a9d Clear retracted status when homing the Z axis 2018-03-03 23:17:10 -06:00
Scott Lahteine
1f488292cd
Add board MKS_BASE_HEROIC (#9924) 
Followup to #9008

- Don't define micro-stepping pins for boards that lack them.
- Allow setting of 128 microsteps with `M350`.
 2018-03-03 23:14:28 -06:00
Scott Lahteine
b6fa55aa37
Fix: M112 calling kill from interrupt (#9922) 
Fix #9906
 2018-03-03 23:13:53 -06:00
Scott Lahteine
7450b7c36e Sanity check for custom boot / status bitmaps 2018-03-03 20:31:06 -06:00
Scott Lahteine
3cdd2591ed Update custom boot screen description 2018-03-03 20:10:35 -06:00
Scott Lahteine
cd4c35c543 Correct M401 / M402 description 2018-03-01 19:11:30 -06:00
Scott Lahteine
b86125c6d6 Update M900 verbiage 2018-03-01 15:25:33 -06:00
Ben Lye
432b72e7a8 Fix DIGITAL_PIN_TO_ANALOG_PIN macro for Atmega1284p (#9883) 2018-03-01 15:14:08 -06:00
Scott Lahteine
a6326d25fb Drop SCARA_FEEDRATE_SCALING 
The updated planner takes the length of the move, so this pre-calculation is no longer needed.
 2018-03-01 04:28:42 -06:00
Bob-the-Kuhn
de26374746 [1.1.x] Add 1284 support & misc. bug fixes (#9869) 2018-03-01 03:05:27 -06:00
Studiodyne
d25f0a5a21 Fix for Fwretract bugfix1.1.x (#9872) 2018-03-01 02:59:42 -06:00
Sebastianv650
951b65c2de Add sanity checks to Linear Advance 1.5 (#9859) 2018-03-01 02:10:39 -06:00
Scott Lahteine
f7b44ac2a6
Fix SENSORLESS_HOMING for Core Kinematics (#9871) 2018-03-01 01:49:41 -06:00
Scott Lahteine
803c3169ad Fix lcd_quick_feedback for BTN_BACK 2018-02-28 20:23:34 -06:00
AnHardt
f151bf8bb7 Fix some mapper, charsize problems (#9865) 2018-02-28 18:56:45 -06:00
Scott Lahteine
198b059b44 Fix manual move axis display value 
The workspace offset is now added to the XYZ values.
 2018-02-28 17:31:38 -06:00
Scott Lahteine
a18d6171a6 Fix Z safe homing sanity check for no probe 
Fix #9851
 2018-02-28 05:30:24 -06:00
Scott Lahteine
8af3c04e7d Fix BTN_BACK 
Followup to #9836
 2018-02-28 03:27:36 -06:00
Anton Piliugin
c5fd486e91 [bugfix-1.1.x] Update russian language 28 Feb 2017 (#9849) 2018-02-28 03:06:33 -06:00
Ben Lye
897170294c Fix Zonestar / ADC keypad with RAMPS. (#9841) 2018-02-28 00:07:42 -06:00
Scott Lahteine
2bde53bd46
Add support for BACK button (if any) (#9836) 2018-02-26 22:53:08 -06:00
Scott Lahteine
1eb3364ac9
Import ENABLE_LEVELING_FADE_HEIGHT from 2.0.x (#9834) 2018-02-26 22:16:09 -06:00
Scott Lahteine
ce5c848284 Remove dupes from pinsDebug_list.h 2018-02-26 19:19:13 -06:00
Scott Lahteine
114e9b0f56 Fix CR-10 status screen missing commas 
Fix #9660
 2018-02-26 15:50:04 -06:00
geigerg
3f56bd91d2 Add files via upload (#9827) 2018-02-26 15:44:24 -06:00
Scott Lahteine
ddfddae4f4 Fix subsequent G29 J commands 
Fix #9826. Solution by @gloomyandy
 2018-02-26 14:51:40 -06:00
Scott Lahteine
c776cda9fa Pins parity with 2.0.x 2018-02-26 01:20:57 -06:00
Scott Lahteine
9d7a1ae9f5
Mesh export in Bilinear + UBL M503 (#9818) 2018-02-26 01:00:56 -06:00
Scott Lahteine
97a35dd534 Compile flags needed in UBL.h 2018-02-25 22:18:13 -06:00
Scott Lahteine
e3e51a9a8d Fix types.h dependency 2018-02-25 22:01:01 -06:00
Scott Lahteine
d0720a565f Finish ubl header patch 
Followup to aa380ae
 2018-02-25 21:35:11 -06:00
Sebastianv650
72d5029f42 Useless line removed (#9813) 
nextAdvanceISR is set in the next if structure in every possible
situation, so it's useless to set it once more before.
 2018-02-25 21:21:15 -06:00