MPCNC/Firmware2
1
0
Fork 0
Code Issues 1 Pull Requests Releases Wiki Activity
9,706 Commits 1 Branch 0 Tags 129 MiB
5b70d3da1c
Commit Graph

8032 Commits

Author SHA1 Message Date
Scott Lahteine
8190fdb260
[2.0.x] Option to use Neopixel as case light (#9270) 
* Add option to use Neopixel as case light

* Apply CASE_LIGHT_USE_NEOPIXEL to example configs
 2018-01-20 16:58:41 -06:00
GMagician
9b519864bf [2.0.x] Relative movements fix (#9259) 2018-01-20 15:22:03 -06:00
Scott Lahteine
887664aa61 Restore broken Dual X Carriage 2018-01-20 15:08:50 -06:00
Scott Lahteine
fb044b6a64 Fix HAL_timer_set_current_count for STM32F1 2018-01-20 14:57:17 -06:00
Scott Lahteine
a8638aa20d Update STM32F1 timer code to use libmaple bb_perip 2018-01-20 14:56:57 -06:00
Scott Lahteine
2e2fd8fd79
Merge pull request #9261 from tcm0116/2.0.x-delta_softstops 
[2.0.x] Allow DELTA to compile with soft endstops disabled
 2018-01-20 14:16:30 -06:00
Scott Lahteine
750cc02b3a
Use delay() in serial temp report 2018-01-20 14:13:17 -06:00
Scott Lahteine
9de8c04945
Allow FIL_RUNOUT_PIN override on RAMPS-based boards 2018-01-20 12:00:59 -06:00
Scott Lahteine
57b61491d3
Set FIL_RUNOUT_PIN for Creality CR10-S 
Tested with M43 and found to be connected to DIO 2
 2018-01-20 11:56:57 -06:00
Scott Lahteine
4a4d832344
Use standard encoder pulses/steps for CR-10S 2018-01-20 11:35:52 -06:00
Thomas Moore
44239b1062 Allow DELTA to compile with soft endstops disabled 2018-01-20 09:40:36 -06:00
Scott Lahteine
4bc4351250
Date refresh 2018-01-20 09:17:57 -06:00
Scott Lahteine
303d792b9f
Merge pull request #9253 from tcm0116/2.0.x-mks_sbase 
[2.0.x] Cleanup MKS-SBASE compile warnings
 2018-01-19 22:37:38 -06:00
Scott Lahteine
afec16e644
Merge pull request #9240 from tcm0116/2.0.x-eeprom 
[2.0.x] Follow-on to #9161
 2018-01-19 22:36:24 -06:00
Scott Lahteine
f2ea8a0529
Merge pull request #9197 from p3p/pr_bf2_operation_freemem 
[2.0.x] LPC1768: Free up some RAM
 2018-01-19 22:35:45 -06:00
Scott Lahteine
0c176c677e
Merge pull request #9231 from GMagician/2.0.x-ramps-pins-fixup 
[2.0.x] Expand RAMP case light possibilities
 2018-01-19 22:29:32 -06:00
Scott Lahteine
f2d09f27bb
Merge pull request #9246 from GMagician/2.0.x-bed-temp-limit-fix 
[2.0.x] Standardized max temp values
 2018-01-19 22:27:19 -06:00
Bob-the-Kuhn
16eb966ee3 PINS_DEBUGGING cleanup for DUE 2018-01-19 21:12:24 -06:00
Thomas Moore
63fd23ab1c Cleanup MKS-SBASE compile warnings 2018-01-19 15:46:34 -06:00
Bob-the-Kuhn
11e68541b0
Merge pull request #9245 from Bob-the-Kuhn/TMC2208-sanity-check-2.0.x 
[2.0.x] add TMC2208 sanity check to AVR
 2018-01-19 15:42:53 -06:00
Thomas Moore
429e6ba8a6 Fix lcd_preheat dummy variable types 2018-01-19 15:24:13 -06:00
GMagician
719cd53e09 Standardized max temp values 
Everywhere in menu items temperatures are "defined value" subtracted by 15.
In one place is subtracted by 5
 2018-01-19 19:32:46 +01:00
Bob-the-Kuhn
0ea9cdf4f2 TMC2208 sanity check 2018-01-19 12:19:34 -06:00
Roxy-3D
7c469c0712
Suggested change to fix Due compile problem 2018-01-18 23:00:03 -06:00
Roxy-3D
bfd9728cf4
Serial buffer over run work around for v2.0.0 (#9236) 
* Work around for serial buffer over run

PronterFace sends a lot of M105 commands.  During long operations such
as UBL's G29 P1, G29 P2, G29 P4 and G26 this can over run the serial
buffer.   This results (very often) in a M1 (actually a M1M105) ending
up in the command queue.

Until we figure out a better way to resolve this issue, this will keep
the UBL commands from experiencing bogus commands at thier completion.
 2018-01-18 19:57:18 -06:00
GMagician
c371bdc499 Expand RAMP case light possibilities 
Pin 6 is only used by servos when 2 or more of them are used
 2018-01-18 18:31:08 +01:00
blye
7c18c2ea5f Fix LCD timer string length 2018-01-17 21:10:45 +00:00
Roxy-3D
9d0cf02fef
Correct mesh size calculations 2018-01-17 09:36:12 -06:00
Scott Lahteine
c7bad74d8f
Merge pull request #9202 from benlye/m73-bugfix 
[2.0.x] Fix progress bar duration when time is exactly 86400s
 2018-01-16 21:14:58 -06:00
Roxy-3D
af9b32e3b9
Give PronterFace time to print the UBL What information... 
Give PronterFace time to print the UBL What information...
 2018-01-16 18:00:57 -06:00
Roxy-3D
acb1e31374
Fix UBL Mesh Size regression 2018-01-16 17:58:15 -06:00
Roxy-3D
f5f1b069ad
Convert UBL mesh tilting to all use the same algorithm (#9204) 
A number of regressions were patched also. The UBL G29 P2 and P4 Press and Hold had stopped working. It is very possible this is broken in the bugfix_v1.1.x branch also.

The main purpose of the Pull Request is to get the 3-Point mesh tilting to use the LSF algorithm just like the grid based mesh tilt. This simplifies the logic and reduces the code size some what. But the real reason to do it is the 3-Point case can be solved exactly. And by feeding these numbers into the LSF algorithm it provides a way to check all that code for 'correctness'.
 2018-01-16 11:08:00 -06:00
blye
554d849827 Fix duration when time is exactly 86400s 2018-01-16 08:12:00 +00:00
Christopher Pepper
6f1bf5d212 LPC1768: Config: default to SDSORT_LIMIT = 64 instead of 256 2018-01-15 22:02:21 +00:00
Christopher Pepper
1e65562d55 LPC1768: HAL: only initialise used HardwareSerial ports 
Misc formatting
 2018-01-15 22:00:59 +00:00
Roxy-3D
9dacd54a50
Get FT-i3-2020 configuration files into compliance with ?_BED_SIZE 2018-01-15 15:33:51 -06:00
Scott Lahteine
d178d6e921 M503 patch for EEPROM_CHITCHAT off 
Fix #9155
 2018-01-15 06:09:25 -06:00
Scott Lahteine
fa432508b0 Followup to Ender config 2018-01-15 06:00:21 -06:00
Thomas Moore
6856eccc77 Master-only TwoWire class for LPC1768 2018-01-15 05:22:03 -06:00
Scott Lahteine
d5bf9e74c4
Merge pull request #8996 from p3p/pr_bf2_more_adc_filter 
[2.0.x] PID control fix and more LPC1768 ADC filtering
 2018-01-15 05:14:25 -06:00
Scott Lahteine
4d2f277d43
Merge pull request #9189 from psavva/tmc_debug_compile_fix 
[2.0.x] Fixes TMC_DEBUG compilation error
 2018-01-15 04:52:21 -06:00
Scott Lahteine
43d3d024ac
Update tmc_util.cpp 2018-01-15 04:51:59 -06:00
Panayiotis Savva
ad500b01e0 Fixes TMC compilation error 2018-01-15 12:43:22 +02:00
Scott Lahteine
f4e4c7a7c8
Merge pull request #9188 from thinkyhead/bf2_creality_ender 
[2.0.x] Add Creality Ender config/board
 2018-01-15 04:33:09 -06:00
Scott Lahteine
2038722c52 LARGE_FLASH obsolete 2018-01-15 03:42:24 -06:00
Scott Lahteine
f887719a40 Creality Ender board support 2018-01-15 03:42:24 -06:00
Scott Lahteine
9a2dd0bc5a Creality Ender 2/4 configuration 2018-01-15 03:42:23 -06:00
Scott Lahteine
2c18faf3e4 General cleanups for HAL 2018-01-15 02:46:37 -06:00
Scott Lahteine
42933c804a Cleanups for STM32F7 2018-01-15 02:46:37 -06:00
Morten
a0246c5c96 Add support for STM32F7 MCU 2018-01-15 01:13:03 -06:00
Scott Lahteine
a27fa80a7e More featureful CR-10S configuration 2018-01-15 01:06:06 -06:00
Scott Lahteine
1a3d2ad275
Merge pull request #9168 from marvin-sinister/rename-M100-2.0.x 
[2.0.x] Rename M200 pins file to uppercase
 2018-01-15 00:49:06 -06:00
Scott Lahteine
a408209d24 More reliable temperature serial report? 2018-01-15 00:43:51 -06:00
Scott Lahteine
5f807e37c5 A second rename saves nine 2018-01-14 23:44:19 -06:00
Scott Lahteine
3ae41e5f7f
Merge pull request #9152 from thinkyhead/bf2_anti_stutter 
[2.0.x] Ensure smooth printer movements
 2018-01-14 23:34:01 -06:00
Scott Lahteine
02ff12d491 More up front option to show SD percentage 2018-01-14 23:32:39 -06:00
Scott Lahteine
3b15c88225
Merge pull request #9153 from thinkyhead/bf2_malyan_support 
[2.0.x] Fix support for Malyan M150
 2018-01-14 22:54:00 -06:00
Scott Lahteine
e753d6298f FLSUN Kossel example configs 2018-01-14 22:52:35 -06:00
Scott Lahteine
77c2d810f9 Bring configs up to date 2018-01-14 22:52:06 -06:00
Scott Lahteine
3952070800 Link to marlinfw.org boot screen tool 2018-01-14 22:41:05 -06:00
Scott Lahteine
0cd397a3f8 Add instructions for Malyan M150 2018-01-14 21:15:03 -06:00
Scott Lahteine
344ebc3bd2 Create and use pins_MELZI_MALYAN.h for Malyan M150 2018-01-14 21:14:58 -06:00
Scott Lahteine
094e9b1dab Remove ARDUINO_ARCH_SAM from serial.h too? 2018-01-14 21:07:10 -06:00
Scott Lahteine
c37d38886c Fix serial.h avr block 
Followup to #8148
 2018-01-14 21:07:10 -06:00
Scott Lahteine
4f5e087ff4 Planner anti-stutter by Sebastian Popp 2018-01-14 21:07:10 -06:00
Scott Lahteine
ac368f2788 Add STEPPER_ISR_ENABLED() to HALs 
Some also get a `HAL_timer_interrupt_enabled` function.
 2018-01-14 21:07:10 -06:00
Scott Lahteine
5578dccaa0
Merge pull request #9161 from tcm0116/2.0.x-eeprom 
[2.0.x] Fix EEPROM SettingsData for 32-bit architectures
 2018-01-14 20:50:37 -06:00
Scott Lahteine
6ba8cf8405
Merge pull request #9163 from GMagician/2.0.x-SD-issues-fix 
[2.0.x] sd issue fix
 2018-01-14 20:48:52 -06:00
Marvin Sinister
50c55b25f7 Renamed to upercase 2018-01-13 15:02:07 +01:00
GMagician
6667a916a4 Indentation fix 2018-01-13 09:48:26 +01:00
GMagician
be717b3c07 Save some program memory 
This will save some program memory with no speed lose
 2018-01-13 08:56:51 +01:00
GMagician
f37c64ee5b Fix unsupported CMD59 
It seems that some SD cards don't support CRC_ON_OFF command. This fix will permit to use also these cards but leaving CRC check active on the system
 2018-01-13 08:53:12 +01:00
Thomas Moore
cfd989d7c5 Fix EEPROM SettingsData for 32-bit architectures 2018-01-12 19:38:23 -06:00
Bob-the-Kuhn
da600e5fbe
Merge pull request #9132 from Bob-the-Kuhn/add-VIKI2-to-Travis 
[2.0.x] add VIKI2 test to Travis & fix LCD contrast (again)
 2018-01-12 00:42:04 -06:00
Scott Lahteine
742cff5f3c Followup to #9141 2018-01-11 22:15:01 -06:00
Thomas Moore
84de428d30 [2.0.x] Fix compile errors (#9141) 
* Update persistent_store_impl.cpp
* Remove define BYTE from serial functions since Arduino docs typically show 0 for the normal case.
 2018-01-11 21:43:26 -06:00
Bob-the-Kuhn
e633ce06c7 LCD contrast type mismatch is back 
WORKS!
 2018-01-11 10:32:58 -06:00
Scott Lahteine
e654ea1e1a
Merge pull request #9130 from thinkyhead/bf2_tmc_followup 
[2.0.x] More TMC followup
 2018-01-11 03:40:45 -06:00
Scott Lahteine
8ac246162e Creality CR-10S configurations 
Provided by printedsolid.com
 2018-01-11 01:10:17 -06:00
Scott Lahteine
048486390e Bring some configs up to date 2018-01-11 01:10:17 -06:00
Scott Lahteine
6a043eee55 Various updates for TMC support 2018-01-10 23:04:48 -06:00
Scott Lahteine
d7fd78cb91
Merge pull request #8148 from tcm0116/2.0.x-multi_host 
[2.0.x] Add multi-host support
 2018-01-10 02:38:59 -06:00
teemuatlut
a8c446c3bc [2.0.x]DUE: Fix includes for SDSUPPORT (#9112) 2018-01-10 00:46:34 -06:00
Thomas Moore
f7efac57b7 Multi-host support 2018-01-10 00:14:47 -06:00
Thomas Moore
dabb75034c Update example configurations 2018-01-10 00:01:20 -06:00
Bob-the-Kuhn
6a50adb4d5 works 2018-01-09 22:15:33 -06:00
Scott Lahteine
5c076a6d93 Improved M915 description 2018-01-09 18:56:27 -06:00
Scott Lahteine
a94104dbb5
Merge pull request #9113 from teemuatlut/TMC_followup 
[2.0.x]TMC followup
 2018-01-09 18:46:35 -06:00
Dave Johnson
554e577676 SERIAL_STATS_* features not supported on USBCON targets (#9127) 2018-01-09 18:42:55 -06:00
Dave Johnson
2db666e99a Enable USE_ZMIN_PLUG on SCARA example (#9126) 2018-01-09 18:41:28 -06:00
Scott Lahteine
7e000e6af4
More EEPROM field debugging (#9123) 2018-01-09 18:33:44 -06:00
GMagician
3a99dc7c5c 2.0.x Fix compiler warning (#9116) 
Fix duplicate language define warning
 2018-01-09 16:54:41 -06:00
GMagician
5295b4713d [2.0.x] add semitec 104NT-4 (#9119) 
Table is very very similar to old 104-GT2 so I added only the name and recycled old ID
 2018-01-09 16:53:12 -06:00
teemuatlut
cdc61ebf53 Add M915 configuration option 2018-01-09 18:28:48 +02:00
teemuatlut
9d923c6c03 Fix TMC gcode commands 2018-01-08 18:45:05 +02:00
Scott Lahteine
99516572b1 Fix TMC current read from EEPROM 2018-01-07 20:48:46 -06:00
Tannoo
f26805e862 [2.0.x] UBL Mesh Storage Message (#9095) 2018-01-07 20:33:53 -06:00
Christopher Pepper
14dcad6bbc LPC1768: Increase ADC median filter from 3 values to 23 
Clarify the HAL_adc_get_result method to make sure correct values enter the filters

HAL: Fix the PID control loop for non-AVR platforms
 2018-01-07 22:15:20 +00:00
Scott Lahteine
60d07f20e7 Make mbl.has_mesh() a method 2018-01-07 00:13:36 -06:00
Scott Lahteine
86818c9a89 Move MBL functions into the class 2018-01-07 00:13:36 -06:00
Unknown
bbb8d4c802 Set has_mesh if user issues G9 S3 
Prevents user from having to manually run through entire manual leveling process only to enable mesh so they can manually restore their offline mesh backup
 2018-01-06 21:07:07 -08:00
Scott Lahteine
2b5a9be49c
Fix M503 skew output 
Followup to 19e75ccf86
 2018-01-06 20:55:57 -06:00
Scott Lahteine
cf2922f164 Laser/spindle PWM off on M5 2018-01-06 15:29:22 -06:00
GMagician
5fb6dd1424 Bmp fix 
Clockwise arrow fixed
 2018-01-06 19:02:36 +01:00
Bob-the-Kuhn
cb0e826c5d
Merge pull request #9068 from Bob-the-Kuhn/SD-detect 
[2.0.x] SD card detect improvement
 2018-01-05 21:09:57 -06:00
Bob-the-Kuhn
f72b0a7b04 1234 2018-01-05 20:36:05 -06:00
Scott Lahteine
702c8acdd5 Settings FIELD_TEST fix 2018-01-05 19:13:30 -06:00
Scott Lahteine
e89f1453ab UBL G29 works without settings.load() 2018-01-05 15:48:34 -06:00
Scott Lahteine
950be70a33 Add FIELD_TEST to validate storage 2018-01-05 15:48:34 -06:00
Scott Lahteine
760c912ab9 Add data size validation 2018-01-05 15:48:34 -06:00
Scott Lahteine
b91ca168fb Add a struct defining EEPROM storage 2018-01-05 15:48:34 -06:00
Scott Lahteine
51e0f2bee3 Add MarlinSettings::validate() 2018-01-05 14:35:24 -06:00
Scott Lahteine
878f54c27b Write filler with NO_VOLUMETRICS 2018-01-05 10:29:49 -06:00
Scott Lahteine
3ea6745b36 Pretty up TMC current write 2018-01-05 10:29:49 -06:00
Scott Lahteine
3319765034 Detab some HAL files 2018-01-05 10:28:17 -06:00
Scott Lahteine
1c41de16d4 Trailing whitespace clean 2018-01-05 10:11:31 -06:00
Scott Lahteine
1746a7352e
Merge pull request #9042 from thinkyhead/bf2_M701_M702 
[2.0.x] Improved Pause/Load/Unload, M701-M702
 2018-01-04 19:41:58 -06:00
Scott Lahteine
048d8a0158 CheapTRONIC v2.0 additions/revisions 
Based on #9030
 2018-01-04 18:00:25 -06:00
Roxy-3D
3a4e107b6b
use SERIAL_EOL(); instead of new line string 2018-01-04 16:20:18 -06:00
Roxy-3D
a5dfe08a81
Add precision to planner.xy_skew_factor so it doesn't print as 0.00 2018-01-04 16:14:09 -06:00
Roxy-3D
19e75ccf86
Add enough precision so planner.xy_skew_factor doesn't print as 0.00 2018-01-04 16:02:22 -06:00
Scott Lahteine
4fb60e1562 M702.cpp => M701_M702.cpp 2018-01-04 15:07:37 -06:00
Scott Lahteine
7541316bb4 Add M701/M702 Filament Load/Unload, M603 2018-01-04 15:07:37 -06:00
Scott Lahteine
81211da7b4 M701 / M702 language changes 2018-01-04 05:05:28 -06:00
Scott Lahteine
8704e533da Apply FILAMENT_LOAD_UNLOAD_GCODES to example configs 2018-01-04 03:56:36 -06:00
Scott Lahteine
455592eee8 Improvements to LCD menu macros 2018-01-04 03:56:36 -06:00
Scott Lahteine
a80f2eea23 Group leveling reports for folding 2018-01-04 03:56:36 -06:00
Scott Lahteine
190cd0a111 Nozzle park args 2018-01-04 03:56:36 -06:00
revilor
0e93506985 Fix for issue #9005, #8942 - Bed PID autotuning (#9036) 2018-01-04 03:26:14 -06:00
Bob-the-Kuhn
016e46a3c0
Merge pull request #9009 from Bob-the-Kuhn/Due-RRDFG-power-up-garbage 
[2.0.x] Due - fix power up garbage on RRDFG LCD
 2018-01-03 23:19:29 -06:00
studiodyne
31582caa07 2.0 Fix for bad Pause extruder position resuming (#9029) 2018-01-03 23:18:27 -06:00
Bob-the-Kuhn
4626d04067 as good as i can get it 
minor edits to force new Travis test (last one timed out)

Update u8g_com_HAL_DUE_st7920_sw_spi.cpp

initial power up display garbage gone
 2018-01-03 22:46:31 -06:00
Scott Lahteine
4af3d436b2 M303 pid autotune cleanup, commentary 2018-01-03 21:30:45 -06:00
Bob-the-Kuhn
e5b71af8c9 snapshot 
found a few more nasties
 2018-01-03 10:41:23 -06:00
Scott Lahteine
724e3f33bc
Merge pull request #9001 from Tannoo/(2.0.x)_LCD_EEPROM_init_fix 
[2.0.x] EEPROM init fix
 2018-01-03 05:47:01 -06:00
revilor
959a2d2527 Add beginTransaction to HAL SPI (#9019) 2018-01-03 05:12:25 -06:00
Tannoo
e43f3ac989 EEPROM init fix 2018-01-03 04:31:01 -06:00
Scott Lahteine
fc67c64b8f
Merge pull request #8989 from tcm0116/2.0.x_ubl 
[2.0.x] Fix UBL compilation warnings
 2018-01-02 21:38:45 -06:00
Thomas Moore
8afc4f8d9d Fix UBL compilation warnings 2018-01-02 21:00:06 -06:00
Bob-the-Kuhn
eca5cc8669
Merge pull request #9003 from Bob-the-Kuhn/Due-PINS_DEBUG-&-related 
[2.0.x] add Due PINS_DEBUG support & misc improvements (replaces PR #8990)
 2018-01-02 18:47:53 -06:00
Bob-the-Kuhn
e9fc7bc69c
Merge pull request #9000 from Bob-the-Kuhn/2.0-LCD-contrast 
[2.0.x] lcd_contrast type mismatch work around
 2018-01-02 18:46:31 -06:00
Bob-the-Kuhn
5574fad69c copy of PR #8991 code 
Formatting tweaks

correct array initialization & remove test code
 2018-01-02 11:17:46 -06:00
Scott Lahteine
d190c702de
Add MKS_BASE Microstepping pins 
Based on #9008
 2018-01-01 18:49:21 -06:00
Scott Lahteine
5e01ee8adf Temperature updates for parity with 1.1.x 2018-01-01 18:29:08 -06:00
Bob-the-Kuhn
adb9ecf3cc copy of PR #8990 2018-01-01 16:11:56 -06:00
Roxy-3D
39e5fabfa9
Z BabyStepping should not be dependent on a bed leveling system being active 2018-01-01 14:46:50 -06:00
Bob-the-Kuhn
ef911a2d12 works 2018-01-01 14:35:16 -06:00
Scott Lahteine
d80c4f1a6e Fix typo in delta call to buffer_line 
Fix #8901
 2017-12-31 01:40:07 -06:00
Scott Lahteine
9312ee63b0
Merge pull request #8979 from thinkyhead/bf2_sync_up_configs 
[2.0.x] Synchronize configs with 1.1.x
 2017-12-31 01:15:43 -06:00
Scott Lahteine
41dfb229ec
Merge pull request #8978 from thinkyhead/bf2_slimming_option 
[2.0.x] SLIM_LCD_MENUS option
 2017-12-31 00:56:29 -06:00
Scott Lahteine
3dd04736c0
Update M17_M18_M84.cpp 2017-12-31 00:26:45 -06:00
Scott Lahteine
2929c9e56f A specific option to SLIM_LCD_MENUS 2017-12-31 00:11:22 -06:00
Scott Lahteine
10edb469bb Apply SLIM_LCD_MENUS to example configs 2017-12-31 00:11:21 -06:00
Scott Lahteine
5294fd132f
Merge pull request #8924 from ejtagle/bugfix-2.0.x 
[2.0.x] Improve SW SPI for DUE a bit more
 2017-12-30 23:32:46 -06:00
Scott Lahteine
0b4a46fa6c Bring configs up to date with 1.1.x 2017-12-30 23:28:53 -06:00
Scott Lahteine
7cc2193bce
Add Tronxy X1 example config (#8972) 2017-12-30 17:25:31 -06:00
etagle
729a9f55fc Improved Sw SPI on DUE HAL a bit more. 
Now the USB MSD can transfer at 750k/s. Previously, it was 500k/s. I think this is the maximum achievable speed using Sw SPI.
 2017-12-30 17:24:38 -06:00
Scott Lahteine
615146c069 Enqueue commands better in ultralcd.cpp 2017-12-30 04:44:59 -06:00
Scott Lahteine
9686ffedef Single pause flag also indicates SD print pause 2017-12-30 04:44:59 -06:00
Scott Lahteine
6d94bbf618 Apply some PGM_P pointers 2017-12-30 04:03:17 -06:00
Bob-the-Kuhn
cba44128d5 fix include 2017-12-29 10:08:30 -06:00
Scott Lahteine
427df8792d Fix Capabilities Report 2017-12-28 21:08:59 -06:00
Scott Lahteine
2526ac6500 Display up to 3 extruders on char LCD 
…and show bed level indicator at the position of the [H] icon, when a heated bed exists.
 2017-12-28 20:17:42 -06:00
Scott Lahteine
db32c185ae
Merge pull request #8860 from Bob-the-Kuhn/2.0.x-DUE-RRDFGSC 
[2.0.x] DUE - update for Reprap Discount Full Graphic Smart Controller
 2017-12-27 05:06:49 -06:00
Scott Lahteine
9ecdd1f4c7 Multi extruder support for M600 and LCD 2017-12-27 04:33:25 -06:00
Scott Lahteine
a1ce6e8ff4 Clear lcd_clicked immediately on use 2017-12-26 22:26:04 -06:00
Scott Lahteine
5effe1590c Fix NO_VOLUMETRICS bug 2017-12-26 20:04:44 -06:00
Scott Lahteine
f163eede78 No sub-menu if NO_VOLUMETRICS 
For parity with #8911
 2017-12-26 18:28:42 -06:00
Scott Lahteine
2c4e03d2cf Indentation of a SW SPI file 2017-12-25 09:34:43 -06:00
Scott Lahteine
1a827d5b68 Opening brace tweaks 2017-12-25 09:34:43 -06:00
Bob-the-Kuhn
a142fab155 Enable RRDFGSC on Due 2017-12-25 09:22:14 -06:00
Scott Lahteine
b259bb4670 Fix tmc_util global vars 2017-12-25 09:05:31 -06:00
Scott Lahteine
4ef965cc40 Fix compiler warnings 2017-12-25 08:53:01 -06:00
Scott Lahteine
9e8008c49c Fixes for G29, esp. 3POINT 2017-12-25 08:37:27 -06:00
Scott Lahteine
026e301307 lcd_map_control deps on ULTIPANEL 2017-12-25 07:46:25 -06:00
Scott Lahteine
f2731c9f93 Allow consecutive uses of G29 2017-12-25 06:32:33 -06:00
Scott Lahteine
4b49ea1e92 General cleanup of config-store, reset_bed_level 2017-12-25 05:16:01 -06:00
Scott Lahteine
2925852244 Fix GT2560 A+ servo pin 2017-12-25 02:18:56 -06:00
Scott Lahteine
c6354fa153 Tweak M125 code 2017-12-25 01:39:55 -06:00
Scott Lahteine
3b51f5c67e Add pause/resume action to example configs 2017-12-25 01:39:18 -06:00
Scott Lahteine
f704f405af Add pause/resume actions on M600, M125 2017-12-25 01:39:18 -06:00
Thomas Moore
f0a8a1a853 [2.0.x] Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE (#8866) 
* Use NOZZLE_PARK_FEATURE for ADVANCED_PAUSE_FEATURE
 2017-12-25 01:38:06 -06:00
Scott Lahteine
705ea98fd3 Comment return false in motion functions 2017-12-24 22:57:15 -06:00
Scott Lahteine
50366b00d5 Tweak cleaning buffer / SD finished command 2017-12-24 20:35:05 -06:00
Scott Lahteine
28fc8741d6 Reduce default jerk. XY by half. Z by 1/4 2017-12-24 19:54:11 -06:00
Bob-the-Kuhn
1a948cbd93 Fix SET_OUTPUT glitch - LPC1768 & DUE 2017-12-24 19:25:32 -06:00
Scott Lahteine
869c89d83f
Merge pull request #8865 from thinkyhead/bf2_more_scara_scaling 
[2.0.x] SCARA Feedrate Scaling for G2/G3 - using HYPOT
 2017-12-24 19:18:13 -06:00
Scott Lahteine
1cf1cf8759 Add RADDS_DISPLAY to example configs 2017-12-24 19:00:23 -06:00
Even
ea1a8d1223 add original RADDS LCD + Controller 
adds setup for the original Radds Display+Controller+SD Card Reader PCB
http://doku.radds.org/dokumentation/lcd-display/
 2017-12-24 19:00:23 -06:00
Scott Lahteine
4a8fd8ae92
Merge pull request #8853 from ejtagle/bugfix-2.0.x 
USB Mass Storage Implementation / CDC with HW flow control and misc fixes and improvements for Arduino DUE/RE-ARM based boards
 2017-12-24 18:50:28 -06:00
Scott Lahteine
aa97cd6e9b
Merge pull request #8871 from petrzjunior/bugfix-2.0.x 
[2.0.x][Language] Update Czech for Dec 2017
 2017-12-24 18:48:59 -06:00
Thomas Moore
2917d1217d Revert "Followup to #8698" 
This reverts commit 4e891e9fb7.
 2017-12-23 17:00:33 -06:00
Petr Zahradník
69a51a426c
Update Czech language Dec 2017 2017-12-22 19:35:09 +01:00
Scott Lahteine
caa5093498 General DELTA_IK macro 2017-12-21 22:41:57 -06:00
Scott Lahteine
c694608450 Apply SCARA_FEEDRATE_SCALING to G2/G3 2017-12-21 22:33:27 -06:00
Scott Lahteine
97d509d4d2 Revert "Improved Core-compatible jerk code" 
Reverting commit 3cd7659
 2017-12-21 16:54:30 -06:00
Scott Lahteine
5bc2acc072 Restore position_float to fix LIN_ADVANCE 2017-12-21 16:45:46 -06:00
etagle
33a6fc70e4 Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC) 2017-12-21 02:42:46 -03:00
etagle
d8a4db72ac Reimplemented SW SPI for DUE in assembler. This allows to reach 12Mhz as SPI Clock and improves 4x the transfer speed to the SD card. This is REQUIRED so access to SD from USB is usable (allows 600Kbytes/second transfer speeds) 2017-12-21 02:35:49 -03:00
etagle
99b2fc2066 Adjusted timings on the ST7290 u8glib so RE-ARM and RAMPS4DUE have no problems when writing to the graphics LCD. This fixes Issue #8787 - Special thanks to Bergerac56 for testinf this out !!! 2017-12-21 02:33:22 -03:00