MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
9,664 Commits 1 Branch 0 Tags 96 MiB
00d03c6dc5
Commit Graph

8004 Commits

Author SHA1 Message Date
Scott Lahteine
1b79217fbc Add UNKNOWN_Z_NO_RAISE option 
With this option enabled, Z won't ever be raised until after `G28` has been completed, and it won't raise if Z becomes unknown. This is good for machines whose beds fall when Z is powered off.
 2018-03-09 23:11:35 -06:00
Scott Lahteine
192507b524 Move do_probe_raise closer to set_probe_deployed 
…and limit the raise to Z_MAX_POS
 2018-03-09 23:03:12 -06:00
Scott Lahteine
0d13c5d077 Fix position_is_reachable_by_probe, add comments 
Fix #10029
 2018-03-09 21:18:50 -06:00
Roxy-3D
fd3e243989
prevent steppers from turning off during manual probes 2018-03-09 17:54:41 -07:00
Scott Lahteine
12b697c5cd Fix UPDATE_ENDSTOP for CorePQ compatibility 
Fixes #9939
 2018-03-09 08:49:44 -06:00
Scott Lahteine
03676d8e2f Fix _tmc_say_axis string address 
Fixes #10003
 2018-03-09 06:07:52 -06:00
Scott Lahteine
3c6d2d7711 Add more delay before pulse off in Linear Advance ISR 
A capital idea from https://github.com/MarlinFirmware/Marlin/pull/9914#issuecomment-371614153
 2018-03-09 05:24:10 -06:00
Scott Lahteine
a9392c6b27 Set a safe default MINIMUM_STEPPER_PULSE of 2 2018-03-09 03:59:18 -06:00
Scott Lahteine
fa12866de3
Have position_is_reachable_by_probe use the whole bed (#10019) 
Previously `position_is_reachable_by_probe` was limited to the area specified for `G29` mesh leveling (even if leveling was disabled). This change will properly consider the entire bed area so that `G30` and other non-leveling probing may take place.
 2018-03-09 03:38:00 -06:00
Scott Lahteine
9508f9ec75 Fix: utility.h requires types.h 2018-03-09 03:33:25 -06:00
Scott Lahteine
beb7e2ed93 Allow servo.cpp to use safe_delay 2018-03-09 03:07:55 -06:00
Scott Lahteine
f24cdf1081
Add Einsy RAMBo board (#10018) 2018-03-09 01:40:34 -06:00
Scott Lahteine
ba1c2a9819 Update servo.* for parity with 2.0.x 2018-03-08 19:32:32 -06:00
Scott Lahteine
e5e3c3ff35
Update powersupply_on in power_on/off (#10014) 
Fix #10004
 2018-03-08 18:56:41 -06:00
Scott Lahteine
9c667b5436 Init old_red to 127 to ensure initial change 
Fix #10012
 2018-03-08 18:27:39 -06:00
Scott Lahteine
de8fbdea6d Init watchdog last in setup() 2018-03-08 17:36:01 -06:00
Scott Lahteine
282170a259 Tweak manual move eindex arg 2018-03-08 16:26:11 -06:00
Scott Lahteine
31980f01ba Wrap stepper_indirection macros in do{}while(0) 2018-03-08 16:23:49 -06:00
Scott Lahteine
dcd2fa9291 Fix compile error with MAX_MESSAGE_LENGTH 
Fix #9988
 2018-03-07 21:58:19 -06:00
Bob-the-Kuhn
179de4423d remove conditional download of custom character RAM 2018-03-07 17:50:18 -06:00
Scott Lahteine
d11ed30584 Fix compile error with char LCD 
Followup to f177da4
 2018-03-07 16:53:03 -06:00
Scott Lahteine
1381b5d57d Fix LA_active_extruder (static) 2018-03-07 05:50:35 -06:00
Scott Lahteine
63d6dddae1 Wrap stepper_indirection macros 2018-03-07 05:45:30 -06:00
Sebastianv650
e5d69d313c Fix for LA (#9965) 
Missed in the original LA 1.5 PR: eISR has to use a local copy of
current_block->use_advance_lead because it might still run wenn the last
block has been set to NULL.
 2018-03-07 05:32:49 -06:00
Scott Lahteine
f177da45bb Fix encoder position for sddirectory 2018-03-07 05:20:15 -06:00
Scott Lahteine
dc40b3ec00 Suspend auto-report during UBL map output 2018-03-07 01:58:37 -06:00
Scott Lahteine
e7d519c898 Add suspend_auto_report flag to suppress auto-report 2018-03-07 01:58:37 -06:00
Scott Lahteine
2bf1bbf399 Add HAS_TEMP_SENSOR conditional 2018-03-07 01:58:31 -06:00
Scott Lahteine
2d0d5eccd8 Move AUTO_REPORT_SD_STATUS to SDSUPPORT block 2018-03-07 01:58:31 -06:00
Scott Lahteine
1f77930e01
Rebuild SD file sort array on Stop SD Print (#9975) 
Thanks Chuck Hellebuyck.
 2018-03-07 01:42:30 -06:00
Scott Lahteine
1ed1882766 Strip extra newline 2018-03-07 00:22:31 -06:00
Scott Lahteine
dc733192be Add AUTO_REPORT_SD_STATUS to example configs 2018-03-07 00:06:17 -06:00
Scott Lahteine
fb9de6e787 Add AUTO_REPORT_SD_STATUS feature 
For parity with 2.0.x ahead of 1.1.9 release.
 2018-03-07 00:06:03 -06:00
Scott Lahteine
ecddd2a655 Make enums into implicit char 2018-03-06 23:36:56 -06:00
Scott Lahteine
fa998178e9 Move extended_axis_codes to PROGMEM 2018-03-06 22:20:35 -06:00
Scott Lahteine
73aa7ffff9 LIN_ADVANCE single stepper optimization 2018-03-06 19:27:43 -06:00
Scott Lahteine
50ad30259f Support duplication mode in LIN_ADVANCE 2018-03-06 19:12:54 -06:00
Scott Lahteine
fa3492fc6e Support DISTINCT_E_FACTORS in tmc_util.cpp 2018-03-06 18:34:43 -06:00
Scott Lahteine
536fa07ed5 Show E0-E4 in monitor_tmc_driver output 
Fix #9966
 2018-03-06 18:27:37 -06:00
Scott Lahteine
828dea2ee0
Improvements to Lightweight ST7920 status screen. (#9960) 
- Show units on lightweight status screen.
- Fixed progress bar so it works with M73
 2018-03-06 01:49:45 -06:00
Scott Lahteine
3bae28a5e1
Put more code between pulse start and stop (#9956) 2018-03-05 23:05:42 -06:00
Scott Lahteine
70e9c07b2d
Fix menu highlight glitch, tweak scrolling code (#9954) 2018-03-05 23:05:05 -06:00
Scott Lahteine
0b016c08c9 M851 - report only with no Z parameter 2018-03-05 02:10:32 -06:00
Scott Lahteine
890a396a2a
Import FilamentRunoutSensor with debounce (#9947) 2018-03-05 01:49:19 -06:00
Scott Lahteine
b01f10dfac Fix custom bootscreen compiler warning 2018-03-04 23:37:32 -06:00
Scott Lahteine
f0d8d76f68
Use static classes for job timers (#9940) 2018-03-04 22:52:25 -06:00
Sebastianv650
bc08ce86be Fix broken reverse planner (#9914) 
See MarlinFirmware/Marlin#9913 for details.
 2018-03-04 21:18:35 -06:00
Scott Lahteine
081ab35e82 Remove some trailing whitespace 2018-03-04 21:13:36 -06:00
Scott Lahteine
eacb8346af Fix #9904 - toDigital should show 00-99 hours 2018-03-04 15:03:31 -06:00
Scott Lahteine
d77be210c1 Fix EXTRA_CYCLES_E handling in LIN_ADVANCE 2018-03-04 15:03:31 -06:00
teemuatlut
36a94ac586 Fix M915 compiling 2018-03-04 11:26:30 +02:00
Scott Lahteine
5ad60d89a8 autotemp_factor is not value_celsius_diff 
See https://github.com/MarlinFirmware/Marlin/issues/9852#issuecomment-369861822
 2018-03-03 23:29:35 -06:00
Thomas Moore
bdfeb54a9d Clear retracted status when homing the Z axis 2018-03-03 23:17:10 -06:00
Scott Lahteine
1f488292cd
Add board MKS_BASE_HEROIC (#9924) 
Followup to #9008

- Don't define micro-stepping pins for boards that lack them.
- Allow setting of 128 microsteps with `M350`.
 2018-03-03 23:14:28 -06:00
Scott Lahteine
b6fa55aa37
Fix: M112 calling kill from interrupt (#9922) 
Fix #9906
 2018-03-03 23:13:53 -06:00
Scott Lahteine
7450b7c36e Sanity check for custom boot / status bitmaps 2018-03-03 20:31:06 -06:00
Scott Lahteine
3cdd2591ed Update custom boot screen description 2018-03-03 20:10:35 -06:00
Scott Lahteine
cd4c35c543 Correct M401 / M402 description 2018-03-01 19:11:30 -06:00
Scott Lahteine
b86125c6d6 Update M900 verbiage 2018-03-01 15:25:33 -06:00
Ben Lye
432b72e7a8 Fix DIGITAL_PIN_TO_ANALOG_PIN macro for Atmega1284p (#9883) 2018-03-01 15:14:08 -06:00
Scott Lahteine
a6326d25fb Drop SCARA_FEEDRATE_SCALING 
The updated planner takes the length of the move, so this pre-calculation is no longer needed.
 2018-03-01 04:28:42 -06:00
Bob-the-Kuhn
de26374746 [1.1.x] Add 1284 support & misc. bug fixes (#9869) 2018-03-01 03:05:27 -06:00
Studiodyne
d25f0a5a21 Fix for Fwretract bugfix1.1.x (#9872) 2018-03-01 02:59:42 -06:00
Sebastianv650
951b65c2de Add sanity checks to Linear Advance 1.5 (#9859) 2018-03-01 02:10:39 -06:00
Scott Lahteine
f7b44ac2a6
Fix SENSORLESS_HOMING for Core Kinematics (#9871) 2018-03-01 01:49:41 -06:00
Scott Lahteine
803c3169ad Fix lcd_quick_feedback for BTN_BACK 2018-02-28 20:23:34 -06:00
AnHardt
f151bf8bb7 Fix some mapper, charsize problems (#9865) 2018-02-28 18:56:45 -06:00
Scott Lahteine
198b059b44 Fix manual move axis display value 
The workspace offset is now added to the XYZ values.
 2018-02-28 17:31:38 -06:00
Scott Lahteine
a18d6171a6 Fix Z safe homing sanity check for no probe 
Fix #9851
 2018-02-28 05:30:24 -06:00
Scott Lahteine
8af3c04e7d Fix BTN_BACK 
Followup to #9836
 2018-02-28 03:27:36 -06:00
Anton Piliugin
c5fd486e91 [bugfix-1.1.x] Update russian language 28 Feb 2017 (#9849) 2018-02-28 03:06:33 -06:00
Ben Lye
897170294c Fix Zonestar / ADC keypad with RAMPS. (#9841) 2018-02-28 00:07:42 -06:00
Scott Lahteine
2bde53bd46
Add support for BACK button (if any) (#9836) 2018-02-26 22:53:08 -06:00
Scott Lahteine
1eb3364ac9
Import ENABLE_LEVELING_FADE_HEIGHT from 2.0.x (#9834) 2018-02-26 22:16:09 -06:00
Scott Lahteine
ce5c848284 Remove dupes from pinsDebug_list.h 2018-02-26 19:19:13 -06:00
Scott Lahteine
114e9b0f56 Fix CR-10 status screen missing commas 
Fix #9660
 2018-02-26 15:50:04 -06:00
geigerg
3f56bd91d2 Add files via upload (#9827) 2018-02-26 15:44:24 -06:00
Scott Lahteine
ddfddae4f4 Fix subsequent G29 J commands 
Fix #9826. Solution by @gloomyandy
 2018-02-26 14:51:40 -06:00
Scott Lahteine
c776cda9fa Pins parity with 2.0.x 2018-02-26 01:20:57 -06:00
Scott Lahteine
9d7a1ae9f5
Mesh export in Bilinear + UBL M503 (#9818) 2018-02-26 01:00:56 -06:00
Scott Lahteine
97a35dd534 Compile flags needed in UBL.h 2018-02-25 22:18:13 -06:00
Scott Lahteine
e3e51a9a8d Fix types.h dependency 2018-02-25 22:01:01 -06:00
Scott Lahteine
d0720a565f Finish ubl header patch 
Followup to aa380ae
 2018-02-25 21:35:11 -06:00
Sebastianv650
72d5029f42 Useless line removed (#9813) 
nextAdvanceISR is set in the next if structure in every possible
situation, so it's useless to set it once more before.
 2018-02-25 21:21:15 -06:00
Scott Lahteine
aa380aeb4b
Parity with 2.0.x in ubl and EEPROM (#9817) 2018-02-25 21:17:36 -06:00
Scott Lahteine
1617798287 Remove conditional wrap from ubl.h 2018-02-25 20:40:05 -06:00
Scott Lahteine
8f6a5d538f Fix CONFIG_ECHO_START 
In reference to #9633
 2018-02-25 05:37:05 -06:00
Scott Lahteine
c1a1f80fff Standardize encoder buzz defaults 2018-02-24 22:55:46 -06:00
Scott Lahteine
8488d64062 Standardize encoder defaults 2018-02-24 22:37:55 -06:00
Scott Lahteine
7dab8ca5dc Add Creality Ender-4 configurations 2018-02-24 22:01:16 -06:00
Scott Lahteine
d0c8aabd28 Move Creality Ender-2 configurations 2018-02-24 22:01:11 -06:00
Scott Lahteine
8c22f9fd4f Bring some example configs up to speed 2018-02-24 22:00:15 -06:00
Scott Lahteine
2e3d74f60f Drop a conditional only used once 2018-02-24 16:31:05 -06:00
Roxy-3D
9e3025e07b
Change Folger Tech i3-2020 defaults... 2018-02-24 10:28:08 -06:00
Scott Lahteine
5299b577d1
Spanish (UTF8) Language (#9785) 
From #7314 by @MrAmericanMike
 2018-02-23 20:23:35 -06:00
Scott Lahteine
47619e4476 Fix a progress bar condition 2018-02-23 19:42:01 -06:00
Scott Lahteine
6845f17fb2 Prettify LCD_PROGRESS_BAR options 2018-02-23 19:13:03 -06:00
Zachary Hill
2aaa1a5815 Further fix of LCD_PROGRESS_BAR (#9784) 2018-02-23 18:52:25 -06:00
Scott Lahteine
f36da47b85 tweak pins_RAMPS.h 2018-02-23 15:10:25 -06:00
Scott Lahteine
03da273ea6 Fix LCD_PROGRESS bar 
Fix #9208
 2018-02-23 13:59:55 -06:00
Scott Lahteine
1c1d444b0c
Merge pull request #9774 from thinkyhead/bf1_g28_restore_leveling 
[1.1.x] Add RESTORE_LEVELING_AFTER_G28 option
 2018-02-23 13:43:03 -06:00
Scott Lahteine
742733d714
Un-pause on print cancellation (#9779) 2018-02-23 13:42:21 -06:00
Scott Lahteine
235d024505 Add RESTORE_LEVELING_AFTER_G28 to example configs 2018-02-23 12:42:21 -06:00
Scott Lahteine
921001f004 Add RESTORE_LEVELING_AFTER_G28 option 
Reference #8670
 2018-02-23 12:42:17 -06:00
Scott Lahteine
0d9d11a2d5 Fix HardwareSerial include for TMC2208 2018-02-23 12:33:14 -06:00
Scott Lahteine
113a5fa80e Fix broken LEVEL_BED_CORNERS 
Fix #8805
 2018-02-23 09:10:33 -06:00
Scott Lahteine
4ea058260b Fix #9732 again 2018-02-23 03:59:40 -06:00
Sebastianv650
9c65890644 [1.1.x] LIN_ADVANCE v1.5 (#9700) 2018-02-23 00:53:41 -06:00
Roman Moravčík
e41b2274b0 [1.1.x] Added missing slovak translation of MSG_THERMAL_RUNAWAY_BED. (#9764) 2018-02-23 00:48:16 -06:00
Scott Lahteine
85162da0df
Fix Z value on HD44780 (#9770) 2018-02-23 00:42:55 -06:00
Scott Lahteine
d55aaf95e8
Merge pull request #9761 from thinkyhead/bf1_lightweight_glcd 
[1.1.x] Lightweight status screen for ST7920
 2018-02-22 23:55:24 -06:00
Roman Moravčík
d6c416bb22 [1.1.x] Slovak translation update. (#9760) 2018-02-22 03:01:00 -06:00
Masterkookus
5f6a8588c5 [1.1.x] Hatchbox Alpha Config with E3Dv6 (#9721) 2018-02-22 02:57:38 -06:00
Scott Lahteine
1c95c13224 Lightweight status screen for ST7920 
- This status screen uses the ST7920 character generator to greatly reduce SPI traffic and MCU load when updating the status screen.

- Has been tested with the RepRapDiscount Full Graphics Smart Controller but should work with any LCD that uses an ST7920 or fully compatible controller.
 2018-02-22 00:46:25 -06:00
Scott Lahteine
967076b080 Add LIGHTWEIGHT_UI to example configs 2018-02-22 00:25:53 -06:00
Scott Lahteine
855b188102
Hephestos2 heated bed kit for all (#9756) 2018-02-21 22:26:56 -06:00
Scott Lahteine
6759be43ea Add CR-10S _Bootscreen.h 2018-02-21 20:19:12 -06:00
Scott Lahteine
6e0001b4f8 Add CR-10mini configuration 2018-02-21 20:19:12 -06:00
Scott Lahteine
84f0ce4751 Some encoder steps handled in Conditionals_LCD.h 2018-02-21 20:19:11 -06:00
Scott Lahteine
d9e2acd1b2 Configs parity with 2.0.x 2018-02-21 20:19:11 -06:00
Scott Lahteine
e8f9473be2 Fix progress bar on DOGM with LCD_SET_PROGRESS_MANUALLY 2018-02-21 19:43:45 -06:00
Scott Lahteine
126a80ea83
Reduce Creality3D bootscreens flash usage (#9745) 2018-02-21 16:08:27 -06:00
Scott Lahteine
aa635fe9f1 pinsDebug patch 2018-02-21 14:21:07 -06:00
Roxy-3D
d473456a08
Fix botched check for being off the mesh... 2018-02-21 13:50:27 -06:00
Scott Lahteine
18881e6725 Add 20x4 option for Sainsmart LCD 2018-02-20 20:09:49 -06:00
Scott Lahteine
1d78bdac82 quick_home_xy sensorless homing 2018-02-20 20:09:45 -06:00
Scott Lahteine
e1fc89c83f Sanitycheck 2.0.x parity 2018-02-20 20:06:17 -06:00
Scott Lahteine
35800eec02 Fix big edit font width calculation 
Fix #9685
 2018-02-20 06:43:48 -06:00
Scott Lahteine
83e093f5cc Fix MALYAN_LCD message bug 
Fix #9711
Based on #9731
 2018-02-20 05:43:18 -06:00
Scott Lahteine
2b7e5c8e6c Extend menu items for SWITCHING_EXTRUDER 
In reference to #5367
 2018-02-19 11:11:04 -06:00
Scott Lahteine
3c2f735fb8 Conditionals for SWITCHING_EXTRUDER 
In reference to #5367. SWITCHING_EXTRUDER was not fully implemented for EXTRUDERS > 2.
 2018-02-19 10:58:06 -06:00
Scott Lahteine
e3370d097a Add a SENSORLESS_HOMING delay to quick_home_xy 
Fix #9471
 2018-02-19 10:11:25 -06:00
Scott Lahteine
f39b28b6a9 Null-terminate lcd_status_message 2018-02-19 10:07:22 -06:00
Scott Lahteine
b1ec140f0b Don't raise FIX_MOUNTED_PROBE on stow 
Reference #9336
 2018-02-19 08:34:25 -06:00
Scott Lahteine
6e932f979d CR-10 Bootscreen 
From @plainpylut in #9660
 2018-02-19 08:05:32 -06:00
Scott Lahteine
cc8711419e Add NUM_RUNOUT_SENSORS to example configs 2018-02-19 06:25:36 -06:00
Scott Lahteine
c04f8e8c9d Support for multiple filament runout sensors 2018-02-19 06:25:35 -06:00
Scott Lahteine
4813938a87 Update configs for 2.0.x parity 2018-02-18 19:42:20 -06:00
quittenkaes
971732b9f6 Add a delay before moving to z_safe_homing position if using TMC2130 sensorless homing (#9705) 
A short delay is needed after homing an axis with TMC 2130 sensorless homing. Otherwise the axis wont move.
 2018-02-18 19:29:06 -06:00
Scott Lahteine
1997640e41
Sync pinsDebug_list.h and apply macros (#9690) 2018-02-18 02:25:47 -06:00
Scott Lahteine
b45a277c52
ENDER can use BOARD_MELZI_CREALITY (#9694) 2018-02-18 02:24:23 -06:00
Scott Lahteine
016bd86c28
Add MSG_THERMAL_RUNAWAY_BED (#9695) 2018-02-18 02:24:08 -06:00
Scott Lahteine
65d69e9507 Strip excess G28 debug logging 2018-02-18 01:09:56 -06:00
Scott Lahteine
28e7562e7a Add CODEPENDENT_XY_HOMING to example configs 2018-02-18 01:09:51 -06:00
Scott Lahteine
2e5a6243df Option to force X or Y to home first when homing the other axis 2018-02-18 01:06:57 -06:00
Bob-the-Kuhn
d413781b98 Fix setPwmFrequency declaration (#9687) 2018-02-17 23:19:49 -06:00
Scott Lahteine
50d38e7d03 Pins spacing, 2.0.x parity 2018-02-17 21:49:00 -06:00
Scott Lahteine
80784c4d11 Remove sanity check for delta probe plug 2018-02-17 18:51:25 -06:00
Scott Lahteine
8761cb0464
Merge pull request #9682 from thinkyhead/bf1_m73_without_sd 
[1.1.x] Allow M73 without SDSUPPORT
 2018-02-17 15:50:19 -06:00
Scott Lahteine
aceadabe89
Merge pull request #9674 from bytespider/bugfix-1.1.x 
Add TronXY XY100 config
 2018-02-17 15:49:29 -06:00
Scott Lahteine
3a1fedaee6 Update LCD_SET_PROGRESS_MANUALLY in configs 2018-02-17 15:41:20 -06:00
Scott Lahteine
a1f0d9d349 Allow LCD_SET_PROGRESS_MANUALLY without SDSUPPORT 2018-02-17 15:41:20 -06:00
Scott Lahteine
c67cefd913 2.0.x parity in ultralcd__impl_HD44780.h 2018-02-17 15:41:20 -06:00
Scott Lahteine
c71f542d61 LCD_PROGRESS_BAR w/out SDSUPPORT for character LCD 2018-02-17 15:41:20 -06:00
Scott Lahteine
fe5ba25a00 Fix #9681 2018-02-17 15:39:46 -06:00
Scott Lahteine
4ae9afcc56 Fix compile error with SHOW_BOOTSCREEN disabled 
Fix #9530
Fix #9524
 2018-02-17 15:39:46 -06:00
Scott Lahteine
c3ff130127
Merge pull request #9672 from thinkyhead/bf1_czech_mate 
[1.1.x] Update Czech language
 2018-02-16 22:47:47 -06:00
Scott Lahteine
fbf8819253 Make safe_delay available for neopixel startup test 
Fix #9033
 2018-02-16 22:25:57 -06:00
Scott Lahteine
a7ebbe6dcd Update Czech advanced pause 2018-02-16 22:22:12 -06:00
Scott Lahteine
ada40af5d6 Move <avr/pgmspace.h> include to MarlinConfig.h 
For parity with 2.0.x, which includes pgmspace.h in the HAL.
 2018-02-16 18:40:39 -06:00
Scott Lahteine
ba4a17f251 Tweak serial.h 2018-02-16 17:54:07 -06:00
Scott Lahteine
12628d43ce Use serial macros where possible 2018-02-16 17:53:47 -06:00
Scott Lahteine
023d21a1cf Add SERIAL_FLUSH and SERIAL_FLUSHTX macros 2018-02-16 17:50:58 -06:00
Scott Lahteine
a8a64f19f4 serial_echopair_P => serial_echopair_PGM 2018-02-16 17:35:26 -06:00
Rob Griffiths
529e6ed1ea added TronXY XY100 config 2018-02-16 13:57:01 +00:00
Thomas Moore
acb4dba7cd Fix LCD manual movement on kinematic machines (#9656) 2018-02-16 02:30:05 -06:00
Bob-the-Kuhn
f508bdded4 Fix VIKI2 hardware SPI compatibility (#9642) 2018-02-16 02:28:42 -06:00
teemuatlut
20f8c9b950 TMC SGT is int8 (#9650) 2018-02-16 02:19:17 -06:00
Scott Lahteine
d7e2e655ca Followup to #9663 2018-02-16 02:14:20 -06:00
Bob-the-Kuhn
15204bd5e9 Fix compile issue with USE_CONTROLLER_FAN (#9665) 2018-02-16 02:02:20 -06:00
Scott Lahteine
2ec90d2162 Followup to #9663 
`ENABLED` only works for flag type options. Floats must use `#ifdef`.
 2018-02-15 22:23:27 -06:00
Scott Lahteine
b56c6b9e13
Patch G26 circles (#9626) 
Easier to configure. Catch an odd divisor.
 2018-02-15 22:11:06 -06:00
Bob-the-Kuhn
1647db8fad Set CONTROLLER_FAN_PIN example to -1 2018-02-15 21:29:09 -06:00
Roxy-3D
c8d3069580
UBL - Allow user to control Z-Height correction for off mesh movements (#9663) 
* UBL - Allow user to control Z-Height correction for off mesh movements

* Enable UBL_Z_RAISE_WHEN_OFF_MESH on test machine for time being
 2018-02-15 19:23:01 -06:00
Roxy-3D
b7e245036b
Fix a comment about M105 buffer over runs... 2018-02-14 17:49:50 -06:00
Roxy-3D
66370006bb
Fix G26 Circles... (#9638) 
Will get this duplicated in bugfix_2.0.0 tomorrow...
 2018-02-14 17:31:25 -06:00
Roxy-3D
3fcd131f46
Cartesian UBL systems should not use SEGMENT_LEVELED_MOVES 
There is significant downside to breaking up the long line segments on UBL Cartesian machines via the SEGMENT_LEVELED_MOVES mechanism.   It adds a lot of extra computation but worse...  It cuts out all of UBL's off mesh Z-Height correction checks.    There have been a large number of people complaining about the nozzle going to infinity or crashing into the bed lately.   They are being caused by
```
void unified_bed_leveling::line_to_destination_cartesian()
```
not watching over the segments being queued up for movement.
 2018-02-14 14:19:52 -06:00
Scott Lahteine
0e7999915d Fix #9361 2018-02-14 07:47:39 -06:00
AnHardt
e301e28e45 Complete M48 description_1 (#9630) 2018-02-14 05:17:48 -06:00
Scott Lahteine
6e4a7e2dcb Init lcd message string programmatically 2018-02-14 05:08:06 -06:00
studiodyne
8fbba6abd9 [1.1.x] French update (#9610) 2018-02-14 04:17:54 -06:00
Scott Lahteine
e2fef4df6f Fix #9201 
FILAMENT_LCD_DISPLAY and SDSUPPORT are a-ok together.
 2018-02-14 03:28:05 -06:00
Scott Lahteine
c93dab2307 MYSERIAL => MYSERIAL0 
For cleaner diffing with Marlin 2.0.x.
 2018-02-14 02:56:56 -06:00
Scott Lahteine
d89a61bd51 Update DIGIPOT_I2C_MOTOR_CURRENTS comments 2018-02-13 22:56:03 -06:00
studiodyne
2683b2636b Update French language (#9590) 2018-02-12 01:08:33 -06:00
Scott Lahteine
7cb3640ea4 Restore welcome message 2018-02-12 01:01:09 -06:00
Scott Lahteine
dc85b604bb
Merge pull request #9591 from teemuatlut/bf1_fix_M914 
[1.1.x] Fix M914 macro
 2018-02-11 08:21:24 -06:00
Scott Lahteine
7e17a2cfd0 26-day-old buried patch to U.B.L. 2018-02-11 06:06:50 -06:00
Scott Lahteine
0acaaf536d Update gMax1.5+ for 2.0.x parity 2018-02-11 05:20:57 -06:00
Scott Lahteine
30b08e218d Patch Max7219 for parity with 2.0.x 2018-02-11 05:19:36 -06:00
teemuatlut
7babfbbcb2 Fix M914 macro 2018-02-11 13:08:55 +02:00
Scott Lahteine
2e7a754ac1 Megatronics baud rate 115200 
Fix #9092
 2018-02-11 03:42:27 -06:00
Scott Lahteine
61f3051982 Fix plan_arc clockwise (G2) 
Fix #9482
 2018-02-11 03:32:18 -06:00
Scott Lahteine
73419681dc Update PB Rev.F pins 2018-02-11 01:36:20 -06:00
Scott Lahteine
bb155ed38e Correct MOTHERBOARD for Geeetech i3 Pro X 
Fix #8856
 2018-02-10 20:27:11 -06:00
Scott Lahteine
7aad82cccd Fix auto_fan in pins.h 2018-02-10 20:02:17 -06:00
Scott Lahteine
18aa682954 Patch SILVER_GATE auto fan 2018-02-10 19:29:36 -06:00
Scott Lahteine
5e72729c67 Fix #8744 2018-02-10 16:51:55 -06:00
Scott Lahteine
f6a73bbd84 Patch Power class 2018-02-10 15:36:42 -06:00
Scott Lahteine
baaf79b755 Use signed for pin_t 2018-02-10 15:30:29 -06:00