MPCNC/Firmware
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
9,574 Commits 1 Branch 0 Tags 96 MiB
203d3f8f56
Commit Graph

7922 Commits

Author SHA1 Message Date
Scott Lahteine
f39b28b6a9 Null-terminate lcd_status_message 2018-02-19 10:07:22 -06:00
Scott Lahteine
b1ec140f0b Don't raise FIX_MOUNTED_PROBE on stow 
Reference #9336
 2018-02-19 08:34:25 -06:00
Scott Lahteine
6e932f979d CR-10 Bootscreen 
From @plainpylut in #9660
 2018-02-19 08:05:32 -06:00
Scott Lahteine
cc8711419e Add NUM_RUNOUT_SENSORS to example configs 2018-02-19 06:25:36 -06:00
Scott Lahteine
c04f8e8c9d Support for multiple filament runout sensors 2018-02-19 06:25:35 -06:00
Scott Lahteine
4813938a87 Update configs for 2.0.x parity 2018-02-18 19:42:20 -06:00
quittenkaes
971732b9f6 Add a delay before moving to z_safe_homing position if using TMC2130 sensorless homing (#9705) 
A short delay is needed after homing an axis with TMC 2130 sensorless homing. Otherwise the axis wont move.
 2018-02-18 19:29:06 -06:00
Scott Lahteine
1997640e41
Sync pinsDebug_list.h and apply macros (#9690) 2018-02-18 02:25:47 -06:00
Scott Lahteine
b45a277c52
ENDER can use BOARD_MELZI_CREALITY (#9694) 2018-02-18 02:24:23 -06:00
Scott Lahteine
016bd86c28
Add MSG_THERMAL_RUNAWAY_BED (#9695) 2018-02-18 02:24:08 -06:00
Scott Lahteine
65d69e9507 Strip excess G28 debug logging 2018-02-18 01:09:56 -06:00
Scott Lahteine
28e7562e7a Add CODEPENDENT_XY_HOMING to example configs 2018-02-18 01:09:51 -06:00
Scott Lahteine
2e5a6243df Option to force X or Y to home first when homing the other axis 2018-02-18 01:06:57 -06:00
Bob-the-Kuhn
d413781b98 Fix setPwmFrequency declaration (#9687) 2018-02-17 23:19:49 -06:00
Scott Lahteine
50d38e7d03 Pins spacing, 2.0.x parity 2018-02-17 21:49:00 -06:00
Scott Lahteine
80784c4d11 Remove sanity check for delta probe plug 2018-02-17 18:51:25 -06:00
Scott Lahteine
8761cb0464
Merge pull request #9682 from thinkyhead/bf1_m73_without_sd 
[1.1.x] Allow M73 without SDSUPPORT
 2018-02-17 15:50:19 -06:00
Scott Lahteine
aceadabe89
Merge pull request #9674 from bytespider/bugfix-1.1.x 
Add TronXY XY100 config
 2018-02-17 15:49:29 -06:00
Scott Lahteine
3a1fedaee6 Update LCD_SET_PROGRESS_MANUALLY in configs 2018-02-17 15:41:20 -06:00
Scott Lahteine
a1f0d9d349 Allow LCD_SET_PROGRESS_MANUALLY without SDSUPPORT 2018-02-17 15:41:20 -06:00
Scott Lahteine
c67cefd913 2.0.x parity in ultralcd__impl_HD44780.h 2018-02-17 15:41:20 -06:00
Scott Lahteine
c71f542d61 LCD_PROGRESS_BAR w/out SDSUPPORT for character LCD 2018-02-17 15:41:20 -06:00
Scott Lahteine
fe5ba25a00 Fix #9681 2018-02-17 15:39:46 -06:00
Scott Lahteine
4ae9afcc56 Fix compile error with SHOW_BOOTSCREEN disabled 
Fix #9530
Fix #9524
 2018-02-17 15:39:46 -06:00
Scott Lahteine
c3ff130127
Merge pull request #9672 from thinkyhead/bf1_czech_mate 
[1.1.x] Update Czech language
 2018-02-16 22:47:47 -06:00
Scott Lahteine
fbf8819253 Make safe_delay available for neopixel startup test 
Fix #9033
 2018-02-16 22:25:57 -06:00
Scott Lahteine
a7ebbe6dcd Update Czech advanced pause 2018-02-16 22:22:12 -06:00
Scott Lahteine
ada40af5d6 Move <avr/pgmspace.h> include to MarlinConfig.h 
For parity with 2.0.x, which includes pgmspace.h in the HAL.
 2018-02-16 18:40:39 -06:00
Scott Lahteine
ba4a17f251 Tweak serial.h 2018-02-16 17:54:07 -06:00
Scott Lahteine
12628d43ce Use serial macros where possible 2018-02-16 17:53:47 -06:00
Scott Lahteine
023d21a1cf Add SERIAL_FLUSH and SERIAL_FLUSHTX macros 2018-02-16 17:50:58 -06:00
Scott Lahteine
a8a64f19f4 serial_echopair_P => serial_echopair_PGM 2018-02-16 17:35:26 -06:00
Rob Griffiths
529e6ed1ea added TronXY XY100 config 2018-02-16 13:57:01 +00:00
Thomas Moore
acb4dba7cd Fix LCD manual movement on kinematic machines (#9656) 2018-02-16 02:30:05 -06:00
Bob-the-Kuhn
f508bdded4 Fix VIKI2 hardware SPI compatibility (#9642) 2018-02-16 02:28:42 -06:00
teemuatlut
20f8c9b950 TMC SGT is int8 (#9650) 2018-02-16 02:19:17 -06:00
Scott Lahteine
d7e2e655ca Followup to #9663 2018-02-16 02:14:20 -06:00
Bob-the-Kuhn
15204bd5e9 Fix compile issue with USE_CONTROLLER_FAN (#9665) 2018-02-16 02:02:20 -06:00
Scott Lahteine
2ec90d2162 Followup to #9663 
`ENABLED` only works for flag type options. Floats must use `#ifdef`.
 2018-02-15 22:23:27 -06:00
Scott Lahteine
b56c6b9e13
Patch G26 circles (#9626) 
Easier to configure. Catch an odd divisor.
 2018-02-15 22:11:06 -06:00
Bob-the-Kuhn
1647db8fad Set CONTROLLER_FAN_PIN example to -1 2018-02-15 21:29:09 -06:00
Roxy-3D
c8d3069580
UBL - Allow user to control Z-Height correction for off mesh movements (#9663) 
* UBL - Allow user to control Z-Height correction for off mesh movements

* Enable UBL_Z_RAISE_WHEN_OFF_MESH on test machine for time being
 2018-02-15 19:23:01 -06:00
Roxy-3D
b7e245036b
Fix a comment about M105 buffer over runs... 2018-02-14 17:49:50 -06:00
Roxy-3D
66370006bb
Fix G26 Circles... (#9638) 
Will get this duplicated in bugfix_2.0.0 tomorrow...
 2018-02-14 17:31:25 -06:00
Roxy-3D
3fcd131f46
Cartesian UBL systems should not use SEGMENT_LEVELED_MOVES 
There is significant downside to breaking up the long line segments on UBL Cartesian machines via the SEGMENT_LEVELED_MOVES mechanism.   It adds a lot of extra computation but worse...  It cuts out all of UBL's off mesh Z-Height correction checks.    There have been a large number of people complaining about the nozzle going to infinity or crashing into the bed lately.   They are being caused by
```
void unified_bed_leveling::line_to_destination_cartesian()
```
not watching over the segments being queued up for movement.
 2018-02-14 14:19:52 -06:00
Scott Lahteine
0e7999915d Fix #9361 2018-02-14 07:47:39 -06:00
AnHardt
e301e28e45 Complete M48 description_1 (#9630) 2018-02-14 05:17:48 -06:00
Scott Lahteine
6e4a7e2dcb Init lcd message string programmatically 2018-02-14 05:08:06 -06:00
studiodyne
8fbba6abd9 [1.1.x] French update (#9610) 2018-02-14 04:17:54 -06:00
Scott Lahteine
e2fef4df6f Fix #9201 
FILAMENT_LCD_DISPLAY and SDSUPPORT are a-ok together.
 2018-02-14 03:28:05 -06:00
Scott Lahteine
c93dab2307 MYSERIAL => MYSERIAL0 
For cleaner diffing with Marlin 2.0.x.
 2018-02-14 02:56:56 -06:00
Scott Lahteine
d89a61bd51 Update DIGIPOT_I2C_MOTOR_CURRENTS comments 2018-02-13 22:56:03 -06:00
studiodyne
2683b2636b Update French language (#9590) 2018-02-12 01:08:33 -06:00
Scott Lahteine
7cb3640ea4 Restore welcome message 2018-02-12 01:01:09 -06:00
Scott Lahteine
dc85b604bb
Merge pull request #9591 from teemuatlut/bf1_fix_M914 
[1.1.x] Fix M914 macro
 2018-02-11 08:21:24 -06:00
Scott Lahteine
7e17a2cfd0 26-day-old buried patch to U.B.L. 2018-02-11 06:06:50 -06:00
Scott Lahteine
0acaaf536d Update gMax1.5+ for 2.0.x parity 2018-02-11 05:20:57 -06:00
Scott Lahteine
30b08e218d Patch Max7219 for parity with 2.0.x 2018-02-11 05:19:36 -06:00
teemuatlut
7babfbbcb2 Fix M914 macro 2018-02-11 13:08:55 +02:00
Scott Lahteine
2e7a754ac1 Megatronics baud rate 115200 
Fix #9092
 2018-02-11 03:42:27 -06:00
Scott Lahteine
61f3051982 Fix plan_arc clockwise (G2) 
Fix #9482
 2018-02-11 03:32:18 -06:00
Scott Lahteine
73419681dc Update PB Rev.F pins 2018-02-11 01:36:20 -06:00
Scott Lahteine
bb155ed38e Correct MOTHERBOARD for Geeetech i3 Pro X 
Fix #8856
 2018-02-10 20:27:11 -06:00
Scott Lahteine
7aad82cccd Fix auto_fan in pins.h 2018-02-10 20:02:17 -06:00
Scott Lahteine
18aa682954 Patch SILVER_GATE auto fan 2018-02-10 19:29:36 -06:00
Scott Lahteine
5e72729c67 Fix #8744 2018-02-10 16:51:55 -06:00
Scott Lahteine
f6a73bbd84 Patch Power class 2018-02-10 15:36:42 -06:00
Scott Lahteine
baaf79b755 Use signed for pin_t 2018-02-10 15:30:29 -06:00
Douglas Hammond
1e00ba5433 Add Tronxy X5S 2018-02-10 15:03:20 -06:00
Scott Lahteine
abda89437d Melzi boards include melzi pins 2018-02-10 15:03:20 -06:00
Scott Lahteine
d6d01f1f8e
Merge pull request #9571 from thinkyhead/bf1_french_update 
Update French language
 2018-02-10 14:15:13 -06:00
GMagician
5a39afb81b [1.1.x] Memory overflow protection (#9563) 2018-02-10 14:14:22 -06:00
Scott Lahteine
017e0e6951 Update French language 
Based on #9556 by @gege2b
 2018-02-10 14:06:02 -06:00
teemuatlut
7ee87dc2db Init CS pins before loading settings 2018-02-10 19:16:08 +02:00
Scott Lahteine
5a53e4d921
Merge pull request #9548 from thinkyhead/bf1_prevent_comments_resetting 
[1.1.0] Prevent watchdog reset due to many comments
 2018-02-09 07:15:10 -06:00
Scott Lahteine
8979990805
Merge pull request #9543 from thinkyhead/bf1_reliable_probe_heaters_off 
[1.1.x] More reliable PROBING_HEATERS_OFF with BED_LIMIT_SWITCHING
 2018-02-09 07:10:33 -06:00
Matteo Ragni
4e276c6e00 [1.1.x] Support for the Anycubic Trigorilla Board (1.3 at least) (#8367) 2018-02-09 05:38:21 -06:00
Scott Lahteine
96bcf08477 Tweak escape handling in serial input 2018-02-09 04:06:44 -06:00
Scott Lahteine
68cc5c72fd No EXTRUDER_RUNOUT_PREVENT during print 2018-02-09 03:36:42 -06:00
Scott Lahteine
06dff0b7ec Fix HAS_CONTROLLER_FAN in is_power_needed 2018-02-09 03:33:45 -06:00
Scott Lahteine
c4dbedd5b6 Prevent watchdog reset due to many comments 
Addressing #7449
 2018-02-09 01:50:42 -06:00
Scott Lahteine
9727e5e3d6 Minor comment/condition cleanup 2018-02-09 00:53:04 -06:00
Scott Lahteine
ad323d852e
Sanity check for SERIAL_PORT 
Addressing #7400
 2018-02-09 00:41:39 -06:00
Scott Lahteine
4300547c66
Size lcd_status_message based on language (#9546) 2018-02-08 23:03:27 -06:00
Scott Lahteine
f61ff9c813 Firmware retraction lost change 2018-02-08 22:20:31 -06:00
Scott Lahteine
55071749b7 Minor changes for 2.0.x parity 2018-02-08 22:20:31 -06:00
Scott Lahteine
9dd8a49f82 Add pin_t to Marln 1.1 branch 2018-02-08 21:01:41 -06:00
Scott Lahteine
36ba754842 More reliable PROBING_HEATERS_OFF with BED_LIMIT_SWITCHING 2018-02-08 21:01:41 -06:00
Scott Lahteine
3e838bf6b6 Cyclops has SINGLENOZZLE and higher temp 2018-02-08 19:07:43 -06:00
Scott Lahteine
b81980a439 TouchX base config differences 2018-02-08 19:07:43 -06:00
Rajesh Vaidheeswarran
98e7b821b4 Add Cyclops configuration for BIBO 2018-02-08 18:24:40 -06:00
GMagician
03f27a5e41 [1.1.x] Fix compile warning (#9540) 2018-02-08 17:59:24 -06:00
Scott Lahteine
cffbb146ea
Correct some retract() comments 2018-02-08 17:56:53 -06:00
Scott Lahteine
1ddbdd0321 Not yet, HAS_DISPLAY 2018-02-08 04:03:05 -06:00
Scott Lahteine
4f04f4e6b8 Followup to #9532 2018-02-08 03:39:20 -06:00
Scott Lahteine
c1a3ec1228
Tweaky followup to I2CPEM update 2018-02-08 03:21:46 -06:00
Scott Lahteine
bdbd15e6d9
Merge pull request #9504 from jaysonkelly/patch-1 
[1.1.x] I2C Position Encoders update
 2018-02-08 02:57:45 -06:00
Scott Lahteine
5c2cb60f03
Merge pull request #9518 from melvinisken/bugfix-1.1.x 
[1.1.x] Changed software serial pins to enable R/W access to TMC2208 drivers
 2018-02-08 02:56:58 -06:00
jaysonkelly
f8a8711075 I2C position encoders update 
Updating I2C position encoders to enable babystepping and Babystep XY when using the ecm microstep correction method. Also changed default method to ECM microstep.
 2018-02-08 02:46:12 -06:00
Scott Lahteine
b509567567
Merge pull request #9514 from FreeJaus/bugfix-1.1.x-eu 
update eu language
 2018-02-08 02:10:58 -06:00
Scott Lahteine
2c6c9e90df
Merge pull request #9508 from tnw513/fix-italian 
Fix italian translation
 2018-02-08 02:10:46 -06:00
Scott Lahteine
8438a57910 Followup to #9532 2018-02-08 02:05:18 -06:00
Thomas Moore
a471cd26e1 [1.1.x] Enable Z axis and delta sensorless homing (#9532) 2018-02-08 02:02:48 -06:00
Scott Lahteine
f3a09768e8 Tweak early handling of M108/M112/M410 2018-02-07 22:43:51 -06:00
Scott Lahteine
9509568b7e Patch utility for debug-leveling 2018-02-07 22:43:51 -06:00
Scott Lahteine
252ae1b52d Drop ubl.h include from steppers.cpp 2018-02-07 22:16:07 -06:00
Scott Lahteine
3137df9ad4 Special override of LCD_WIDTH 2018-02-07 22:16:07 -06:00
Scott Lahteine
42866db251 Fix compile with BLUETOOTH 
Addressing #7110
 2018-02-07 18:06:26 -06:00
Melvin Isken
0c6c96bb60 Changed software serial pins to enable R/W access to TMC2208 drivers 2018-02-07 09:52:49 +01:00
Scott Lahteine
3621f21fb2 Clean trailing space 2018-02-07 02:40:41 -06:00
1138-4EB
3d346f8398 update eu language 2018-02-07 01:12:37 +01:00
tnw513
41785a10dd Fix italian translation 2018-02-06 15:09:06 +01:00
Scott Lahteine
c4f1a191c3 Marlin.ino needs no content 2018-02-06 01:09:51 -06:00
Scott Lahteine
967bf41080 Add a proper comment for G26 2018-02-06 00:59:54 -06:00
Christopher Reimer
254417e8b0 Enable and disable power supply automatically 2018-02-06 00:20:33 -06:00
Scott Lahteine
80946a17ee Add AUTO_POWER_CONTROL to example configs 2018-02-06 00:20:26 -06:00
1138-4EB
b86dfd35ae Configs for Prusa i3 Pro B GT2560 Rev.A Plus 
One without probe and one with BLTOUCH.
 2018-02-05 23:54:19 -06:00
Scott Lahteine
527d260581 Add ULTI_CONTROLLER to example configs 2018-02-05 22:24:08 -06:00
Project-J²
ae2476dfdb Add UltiController v2.1 support 
Add compatibility with the original screen bord from Ultimaker 2 printer
(UltiController v2.1 with the PG-2864ALBP I2C display)
 2018-02-05 22:24:08 -06:00
Scott Lahteine
91eaa54ea9 M100 comment 2018-02-05 21:53:21 -06:00
Scott Lahteine
1352acdf75 Adjustment to DOG_CHAR_*_EDIT 2018-02-05 20:24:18 -06:00
Scott Lahteine
123c6c5d34
Num-to-string functions for DEBUG_LEVELING_FEATURE 
Fix #9429
 2018-02-05 19:05:07 -06:00
Scott Lahteine
df320209c3 Patch hex_print_routines.* include order 2018-02-05 17:05:26 -06:00
Scott Lahteine
8da92b6823
Fix default arg in lcd_goto_screen 2018-02-05 16:41:59 -06:00
Scott Lahteine
b708bcf8b1
sp 2018-02-05 15:56:58 -06:00
Scott Lahteine
7b3e28fc77
Merge pull request #9489 from GMagician/1.1.x-Simplify-bltouch-configuration 
[1.1.x] Simplify bltouch configuration
 2018-02-05 14:37:34 -06:00
Scott Lahteine
873fb84d27
Fix const mesh_index_pair in G26 
Followup to #9493
 2018-02-05 14:29:47 -06:00
GMagician
587e6b7c8d [1.1.x] Fix compiler error when G26 is enabled 
Address #9491
 2018-02-05 21:21:42 +01:00
GMagician
f1958ac060 [1.1.x] Simplify bltouch configuration 
When using bltouch Z_MIN_ENDSTOP_INVERTING must match Z_MIN_PROBE_ENDSTOP_INVERTING

since both are redefined latter is just redefined equal to first
 2018-02-05 19:52:41 +01:00
Scott Lahteine
0f6f05441b Implement MALYAN_LCD 2018-02-04 21:18:49 -06:00
Scott Lahteine
ca58084020 Add MALYAN_LCD to configurations 2018-02-04 21:18:42 -06:00
Scott Lahteine
89a9aa931f SanityCheck.h parity with 2.0.x 2018-02-04 21:17:03 -06:00
Scott Lahteine
e9d374dd54 Tweak sanity-check for SENSORLESS_HOMING 2018-02-04 21:17:03 -06:00
Scott Lahteine
21bfbb9d44 Apply standards for whole-file conditions 2018-02-04 21:17:03 -06:00
Scott Lahteine
5054c53901 Export more in ultralcd.h 
Closer parity with 2.0.x
 2018-02-04 21:17:03 -06:00
Scott Lahteine
56d5c5b97a Misc. comments 2018-02-04 21:16:07 -06:00
Scott Lahteine
ad70d76faa
Merge pull request #9332 from paierh/bugfix-1.1.x-UBL-pattern 
[1.1.x] Change angles for circles in G26-validation-pattern
 2018-02-04 19:05:32 -06:00
Michael Neumann
499248c5ef Allow override of RAMPS CS Pins 2018-02-04 06:10:42 -06:00
shaktee
6e86c9d22b Add BIBO configs to Marlin bugfix-1.1.x (#9467) 
[1.1.x] BIBO TouchX configuration
 2018-02-03 23:20:35 -06:00
Scott Lahteine
d00eb4da5c Language updates for parity 2018-02-03 22:48:06 -06:00
Thomas Moore
5b4e39a429 Apply feedrate to nozzle movement for kinematic machines 2018-02-03 22:17:13 -06:00
Scott Lahteine
3bdd7b1ed3 Reduce trig table down to 6 floats 2018-02-03 19:16:42 -06:00
GMagician
14b7c8cf51 [1.1.x] Fix temperature out of LCD 
Fix bug introduced in #9381

Original code was 18-chars*6 hence reversed number in if statements
 2018-02-03 22:58:26 +01:00
paierh
68cff5f245 Change G26 circle angles 
Changed the start- and end-angles for circles in the mesh-validation-pattern to avoid crossing lines.

At the start-/end-point of the circles there is a small dot of filament on my printer.
When drawing lines after the circles the nozzle crashes into those dots and destroys the circles.
I solved this problem by rotating the start- and end-points by 45 degrees.
 2018-02-02 05:24:31 -06:00
Manuel Valentino
652162777b [1.1.x] Fixed wrong information about TMC2208 wiring (#9334) 2018-02-02 04:14:43 -06:00
teemuatlut
923f17328f Add TMC software SPI (#9362) 2018-02-02 03:56:08 -06:00
Custom3DProducts
f4076fe99d [1.1.x] Add Z_PROBE_HYSTERESIS to mitigate Z jerking while probing (#9375) 2018-02-02 02:29:19 -06:00
Scott Lahteine
6445859270
Merge pull request #9373 from nikkoura/fix_fr_strings 
[1.1.x] Fix french language (typos, case homogeneity)
 2018-02-02 01:54:12 -06:00
GMagician
4661451d32 [1.1.x] Fix compile error on delta when NO_WORKSPACE_OFFSETS (#9387) 2018-02-02 01:43:53 -06:00
Scott Lahteine
8bccd0ef5b Fix up _Bootscreen.h and _Statusscreen.h 
- Support for 3 and 4-frame fan animation
- Binary bitmap data for easier visualization
- Cleanup mystery numbers, etc.
 2018-02-02 00:55:02 -06:00
Scott Lahteine
f4639fa964 Move SET_BIT macro to endstops.cpp and simplify 2018-02-02 00:50:29 -06:00
Scott Lahteine
0a10d010b7
Merge pull request #9390 from tcm0116/1.1.x-retract 
[1.1.x] Clear retracted status when homing the Z axis
 2018-02-01 23:36:53 -06:00
Scott Lahteine
7a056a4e09 Patch resume_print based on suggestion 
See #9392
 2018-02-01 23:34:14 -06:00
Scott Lahteine
33c459c1d6 Parser followup patch 
Based on #9393
 2018-02-01 23:25:22 -06:00
Scott Lahteine
65c2f3bb65
Merge pull request #9435 from thinkyhead/cleanup_binary_deleteme 
[1.1.x] Separate 32-bit wide bit macros
 2018-02-01 22:44:18 -06:00
Scott Lahteine
31920a5285 Add / use 32-bit wide bit macros 2018-02-01 21:47:23 -06:00
Scott Lahteine
b78cccad0f Fix broken G29 W I J 2018-02-01 19:50:18 -06:00
Thomas Moore
36a1d12238 Clear retracted status when homing the Z axis 2018-01-29 19:35:16 +00:00
Nikkoura
79183f7620 Fix french language (typos, case homogeneity) 2018-01-28 00:01:00 +01:00
GMagician
b0f148f7db [1.1.x] Fix SD wrong filename list (#9343) 
If last file in directory has short filename and is preceded by a deleted long file name. SD menu will wrongly report long deleted file name as last entry
 2018-01-24 23:07:58 -06:00
Scott Lahteine
bc4fa3984b Prettier codebits debugging 2018-01-24 00:30:58 -06:00
Scott Lahteine
d60e5c89d8
Merge pull request #9326 from thinkyhead/bf1_fix_parser_M118 
[1.1.x] Fix parser.has_value, M118 parameters
 2018-01-24 00:23:50 -06:00
Stefan May
908d487212 removed execution mode from files 2018-01-24 00:17:34 -06:00
Scott Lahteine
a855d01336 Fix M118 parameter parsing 2018-01-23 23:50:42 -06:00
Scott Lahteine
d5ad51821c Simplify G-code debug option 2018-01-23 23:50:42 -06:00
Scott Lahteine
59b5800e58 Change parser codebits from array to int32_t 2018-01-23 23:50:42 -06:00
Scott Lahteine
1b84807eb0 Fix has_value with FASTER_GCODE_PARSER 2018-01-23 23:50:42 -06:00
Scott Lahteine
3ab4736ac9 Move some strings to PROGMEM 2018-01-23 23:50:42 -06:00
Scott Lahteine
d8aa40eedf Marlin must override _BV for 32-bit masks! 2018-01-23 23:50:42 -06:00
Scott Lahteine
2177c246d5 Patch BQ Hephestos 2 filament diameter 
From #9314
 2018-01-23 20:38:43 -06:00
Scott Lahteine
f447668387 Optimize some serial strings 2018-01-23 18:59:35 -06:00
Scott Lahteine
d4ab383a1b Lightly optimize arc length calculation 2018-01-23 18:59:35 -06:00
Scott Lahteine
87c254b238
Patch M114 D logical output 2018-01-23 18:48:53 -06:00
Scott Lahteine
df5c06ab7b Fix G29 no_action with A and Q 2018-01-23 13:58:36 -06:00
Scott Lahteine
b2dcb75c6c Include Z Fade in log_machine_info 2018-01-23 13:58:36 -06:00
Scott Lahteine
074f191bc3 Followup patch for TMC stepper init 2018-01-23 13:58:36 -06:00
Manuel Valentino
2bda584fc6 Added missing SoftwareSerial begin for TMC2208 2018-01-22 10:49:40 -06:00
Thomas Moore
b818543045 [1.1.x] Fix change filament for delta machines (#9296) 2018-01-22 10:19:00 -06:00
Scott Lahteine
1cea0b6f70 Fix Skew Correction pre-calculation overflow error 2018-01-22 08:22:28 -06:00
Scott Lahteine
5c6061ea5a More precision in M852 skew report 2018-01-22 08:06:40 -06:00
Scott Lahteine
6799aa9806
Merge pull request #9278 from oysteinkrog/fix/DualX_Endstops_1.1.x 
[1.1.x] Fix DUAL_X_CARRIAGE endstop tests
 2018-01-22 07:42:28 -06:00
Scott Lahteine
049898fa30 Update comment on set_home_offset 2018-01-22 06:14:55 -06:00
Scott Lahteine
feb6014e92 Don't run M600 on filament runout if the nozzle is cold 2018-01-22 05:46:29 -06:00
Scott Lahteine
c7ae531e35 Better LCD message when heating needed 2018-01-22 05:46:29 -06:00
Scott Lahteine
c373afbddd Clean up and document load/unload/pause/resume 2018-01-22 05:46:19 -06:00
Scott Lahteine
c970869d74 Add hotEnough methods 2018-01-22 05:46:19 -06:00
Scott Lahteine
e8687e5b9e Update pins.h for parity, protect MS pins 2018-01-22 02:19:04 -06:00
Scott Lahteine
198498b1aa Sanity check for TMC2130 having CS pins 2018-01-22 02:04:21 -06:00
cprund
0527090a31 Minor bugfix to the code that enables the 2nd X stepper. It needs to be enabled for X_DUAL_STEPPER_DRIVERS. (#9286) 2018-01-22 01:32:09 -06:00
Scott Lahteine
3d9f360b5a Better probe boundaries for linear/grid 2018-01-22 01:10:34 -06:00
Scott Lahteine
c8ac3a2a72 Add example configs for JGAurora A5 2018-01-21 22:23:31 -06:00
Scott Lahteine
957bb3124a Add thermistor 15 tuned for JGAurora A5 2018-01-21 16:57:47 -06:00
Øystein Krog
1f37781bf1 Fix DUAL_X_CARRIAGE endstops 
\#8170 fixed
(cherry picked from commit 441517bbe1625aa68a49aef0f98c6c4184e66dff)
 2018-01-21 16:32:29 +01:00
Scott Lahteine
7b62670987
Merge pull request #9272 from thinkyhead/bf1_creality_tuneup 
[1.1.x] Fix and improve Creality configs
 2018-01-21 02:53:08 -06:00
Scott Lahteine
7b5a4f71be
Fix toDigital length with days 
From #9220
 2018-01-21 02:50:54 -06:00
Scott Lahteine
94a9cd6477 CR-10S filament change length, enhanced status bitmap 2018-01-21 01:58:55 -06:00
Scott Lahteine
0cfcc7cbf5 Make "Ender" status screen dual-nozzle ready 2018-01-21 01:58:55 -06:00
Scott Lahteine
292755258a Add a heating indicator X offset 2018-01-21 01:58:40 -06:00
nhchiu
4a40cf268d Use NEOPIXEL as case light 
Add an option to use the NEOPIXEL LED as case light.
 2018-01-20 16:57:04 -06:00
Scott Lahteine
428fbe8228 Apply CASE_LIGHT_USE_NEOPIXEL to example configs 2018-01-20 16:27:30 -06:00
Scott Lahteine
81a12b2fac Relative movements fix 2018-01-20 15:22:38 -06:00
Scott Lahteine
fb636db61a Patch to restore broken Dual X Carriage 2018-01-20 15:07:40 -06:00
Scott Lahteine
369f1a64d8
Merge pull request #9262 from tcm0116/1.1.x-delta_softstops 
[1.1.x] Allow DELTA to compile with soft endstops disabled
 2018-01-20 14:16:14 -06:00
Scott Lahteine
6ed2840615
Use delay() in serial temp report 2018-01-20 14:12:30 -06:00
Scott Lahteine
eb3a05c437
Allow FIL_RUNOUT_PIN override on RAMPS-based boards 2018-01-20 12:00:03 -06:00
Scott Lahteine
d29a0d64d5
Set FIL_RUNOUT_PIN for Creality CR10-S 
Tested with M43 and found to be connected to DIO 2
 2018-01-20 11:58:37 -06:00
Scott Lahteine
09ad00b2d1
Use standard encoder pulses/steps for CR-10S 2018-01-20 11:34:53 -06:00
Thomas Moore
f8192f6e46 Allow DELTA to compile with soft endstops disabled 2018-01-20 09:43:59 -06:00
Scott Lahteine
f360b3b849
Date refresh 2018-01-20 09:17:00 -06:00
Scott Lahteine
74c23bf80d
Merge pull request #9232 from GMagician/1.1.x-ramps-pins-fixup 
[1.1.x] Expand RAMP case light possibilities
 2018-01-19 22:29:09 -06:00
Scott Lahteine
8d14ff1446
Merge pull request #9248 from GMagician/1.1.x-bed-temp-limit-fix 
[1.1.x] Standardized max temp values
 2018-01-19 22:27:00 -06:00
GMagician
2814103458 Standardized max temp values 
Everywhere in menu items temperatures are "defined value" subtracted by 15.
In one place is subtracted by 5
 2018-01-19 19:41:45 +01:00
Bob-the-Kuhn
d0e61d82c0 TMC2208 sanity check 2018-01-18 23:16:41 -06:00
Roxy-3D
0edf5a2ab5
Better handle serial over runs... 2018-01-18 16:51:27 -06:00
Roxy-3D
597d94bd3a
Better handle serial buffer over run 2018-01-18 16:48:12 -06:00
Roxy-3D
73565728c7
Further clean up for serial over run issue during long operations 2018-01-18 14:38:18 -06:00
GMagician
3b53c5ada1 Expand RAMP case light possibilities 
Pin 6 is only used by servos when 2 or more of them are used
 2018-01-18 18:35:08 +01:00
Roxy-3D
cbdbeb3e69
PronterFace M105 work around (#9227) 
PronterFace keeps sending M105 requests during long operations like G29 P1, G29 P2, G29 P4 and G26. The serial buffer fills up before the operation is complete. The problem is, a corrupted command gets executed. It is very typical for the M105 to turn into a M1 (actually... M1M105 is typical).

This causes the printer to say "Click to resume..."

This is a temporary fix until we figure out the correct way to resolve the issue.

More work needed for G26.
 2018-01-17 22:51:19 -06:00
Roxy-3D
80c1afde0f
Fix mesh size... 2018-01-17 09:33:18 -06:00
Roxy-3D
c11665e92f
Regression fixes for UBL's G29 P1, G29 P2, G29 P4 and G26 (#9213) 
The changes to ultralcd.cpp for is_lcd_clicked() did not encompass the
full functionality of UBL's G29 P1, P2 and P4.   It also broke G26's
ability to abort in several of its phases.

This is the first pass at fixing the problem.   It has been tested for
correctness for several hours but more testing  needs to be done.
There may be a few follow up patches to finish covering all the corner
cases, but right now I need to merge this before any conflicts show up.

Some of these changes will need to be moved over to the bugfix-v2.0.0
branch.   That will happen a few days from now.
 2018-01-17 00:27:50 -06:00
Scott Lahteine
333bd8f394
Merge pull request #9203 from benlye/m73-bugfix-1.1.x 
[1.1.x] Fix progress bar duration when time is exactly 86400s
 2018-01-16 21:14:31 -06:00
Bob-the-Kuhn
ba9aa47260
Revert "[1.1.x] Fix missing deceleration steps" 2018-01-16 11:31:27 -06:00
blye
deda3d3a3c Fix duration when time is exactly 86400s 2018-01-16 08:16:42 +00:00
Bob-the-Kuhn
ec028faa1b
Merge pull request #9174 from Sebastianv650/fix_missing_decel_steps 
[1.1.x] Fix missing deceleration steps
 2018-01-15 21:03:51 -06:00
Roxy-3D
06adef7343
Get FT-i3-2020 example files in compliance with ?_BED_SIZE 2018-01-15 15:32:19 -06:00
Scott Lahteine
69c993092b Followup to Ender config 2018-01-15 05:48:50 -06:00
Tommie Gannert
f3f26f7cb3 Creality Ender support. 
Reverse engineered from the unpublished firmware from Creality,
inferring the base version and configuration they used. The basis is
the firmware version from "Jul 31 2017 10:16:30". Configurations were
found by seeing what code was compiled into the firmware, and
constants used there.

They used Marlin 1.0.1, because

* 1.0.0 had very different serial output in `setup()` and overall
  code structure.
* 1.0.2 changed the `VERSION_STRING` to include a leading space,
  and `lcd_init` uses `SET_INPUT` instead of `pinMode`.

For U8Glib, a version between 1.14 and 1.17 was used, because

* 1.12 didn't have the extra speed argument to u8g_InitCom.
* 1.13 didn't have the soft reset instruction for UC1701 initialization.
* 1.18 has a new directory structure.

Quirks

* The value of PID_dT hints that F_CPU is 20M, but MarlinSerial.begin
  suggests it's indeed 16M (and the board uses 16M). Left at 16M for now.

* The LED and DOGLCD_CS are on the same pin.
 2018-01-15 03:39:43 -06:00
Scott Lahteine
a16ae30a61 More featureful CR-10S configuration 2018-01-15 01:02:23 -06:00
Scott Lahteine
175207659a
Merge pull request #9183 from thinkyhead/bf1_new_flsun_config 
[1.1.x] Add FLSUN Kossel configuration
 2018-01-15 00:49:25 -06:00
Scott Lahteine
5129eb1d43 More reliable temperature serial output? 2018-01-15 00:44:55 -06:00
Scott Lahteine
8f08e029d8 More up-front option to show SD percentage 2018-01-14 23:30:59 -06:00
Scott Lahteine
5c6c12dc3a Patch EEPROM for 32-bit 2018-01-14 23:18:45 -06:00
Scott Lahteine
734fa91e63 Misc config updates 2018-01-14 23:18:45 -06:00
Scott Lahteine
1d5eba4470 Add FLSUN Kossel configuration 2018-01-14 23:18:45 -06:00
Scott Lahteine
758d9db964 Link to marlinfw.org bitmap tool 2018-01-14 22:39:57 -06:00
Scott Lahteine
1d8b03964f
Merge pull request #9164 from GMagician/1.1.x-SD-issues-fix 
[1.1.x] sd issue fix
 2018-01-14 20:47:04 -06:00
Sebastianv650
4fa0937a55 Fix missing deceleration steps 
Marlin never reached final_speed after deceleration.
 2018-01-14 17:09:47 +01:00
GMagician
82dc89bfd2 Save some program memory 
This will save some program memory with no speed lose
 2018-01-13 09:46:54 +01:00
GrantM11235
a0bd811093 [1.1.x] Fix support for Malyan M150 (#9146) 
Implements changes to LCD and encoder pins from
forums.reprap.org/read.php?110,716538,728278 and also sets
ST7920_DELAY_[1-3] to DELAY_2_NOP to be compatible with the slower LCD
 2018-01-12 01:14:07 -06:00
Scott Lahteine
c1d6d24b9d Cleanup spacing, commentary 2018-01-11 18:52:54 -06:00
Sebastianv650
e2871f0dcd [1.1.x] Ensure smooth printer movements (#9149) 
- Never execute a block without an up-to-date trapezoid
- Start blocks with MINIMUM_PLANNER_SPEED, except when coming from a full stop
 2018-01-11 18:50:18 -06:00
Bob-the-Kuhn
4393c3ef7f LCD_CONTRAST to uint16_t for 1.1.x parity (#9148) 2018-01-11 18:32:41 -06:00
Scott Lahteine
e8b1bbac83 Creality CR-10S configurations 
Provided by printedsolid.com
 2018-01-11 01:03:34 -06:00
Scott Lahteine
885200f833 Bring other configs up-to-date 2018-01-11 01:03:34 -06:00
Scott Lahteine
3df0d62725 Updates to TMC support 2018-01-10 04:32:49 -06:00
Scott Lahteine
d1ce0bc071 M915 Z Axis Calibration 2018-01-09 18:55:08 -06:00
Scott Lahteine
9714c9aebe
Merge pull request #9128 from fiveangle/bf1-disable_serial_stats_on_usbcon 
[1.1.x] SERIAL_STATS_* features not supported on USBCON targets
 2018-01-09 18:42:26 -06:00
Dave Johnson
2fcef3e8e2 Enable USE_ZMIN_PLUG on SCARA example (#9125) 2018-01-09 18:41:02 -06:00
Dave Johnson
dd55c98139 SERIAL_STATS_* features not supported on USBCON targets 2018-01-09 16:27:57 -08:00
Scott Lahteine
bb5ba482bc More EEPROM field debugging 2018-01-09 18:10:33 -06:00